An 8.3 filename^[1] (also called a short filename or SFN) is a filename convention used by old versions of DOS, versions of Microsoft Windows prior to Windows 95, and Windows NT 3.51. It is also used in modern Microsoft operating systems as an alternate filename to the long filename for compatibility with legacy programs. The filename convention is limited by the FAT file system. Similar 8.3 file naming schemes have also existed on earlier CP/M, Atari, and some Data General and Digital Equipment Corporation minicomputer operating systems.

Overview[link]

8.3 filenames have at most eight characters, optionally followed by a period "." and a filename extension of at most three characters. For files with no extension, the "." if present has no significance (that is "myfile" and "myfile." are equivalent). File and directory names are uppercase, although systems that use the 8.3 standard are usually case-insensitive.

VFAT, a variant of FAT with an extended directory format, was introduced in Windows 95 and Windows NT 3.5. It allowed mixed-case Unicode long filenames (LFNs) in addition to classic 8.3 names.

To maintain backward-compatibility with legacy applications (on DOS and Windows 3.1), an 8.3 filename is automatically generated for every LFN, through which the file can still be renamed, deleted or opened. The 8.3 filename can be obtained using the Kernel32.dll function GetShortPathName.^[2][3]

Although there is no compulsory algorithm for creating the 8.3 name from an LFN, Windows uses the following convention:^[4]

1. If the LFN is 8.3 uppercase, no LFN will be stored on disk at all.
   • Example: "TEXTFILE.TXT"
2. If the LFN is 8.3 mixed case, the LFN will store the mixed-case name, while the 8.3 name will be an uppercased version of it.
   • Example: "TextFile.Txt" becomes "TEXTFILE.TXT".
3. If the filename contains characters not allowed in an 8.3 name (including space which was disallowed by convention though not by the APIs) or either part is too long, the name is stripped of invalid characters such as spaces and extra periods. Other characters such as "+" are changed to the underscore "_", and uppercased^{[clarification needed]}. The stripped name is then truncated to the first 6 letters of its basename, followed by a tilde, followed by a single digit, followed by a period ".", followed by the first 3 characters of the extension.
   • Example: "TextFile1.Mine.txt" becomes "TEXTFI~1.TXT" (or "TEXTFI~2.TXT", should "TEXTFI~1.TXT" already exist). "ver +1.2.text" becomes "VER_12~1.TEX".
4. Beginning with Windows 2000, if at least 4 files or folders already exist with the same initial 6 characters in their short names, the stripped LFN is instead truncated to the first 2 letters of the basename (or 1 if the basename has only 1 letter), followed by 4 hexadecimal digits derived from an undocumented hash of the filename, followed by a tilde, followed by a single digit, followed by a period ".", followed by the first 3 characters of the extension.
   • Example: "TextFile.Mine.txt" becomes "TE021F~1.TXT".

NTFS, a file system used by the Windows NT family, supports LFNs natively, but 8.3 names are still available for legacy applications. This can be optionally disabled to increase performance in situations where large numbers of similarly named files exist in the same folder.^[5]

The ISO 9660 file system (mainly used on compact discs) has similar limitations at the most basic Level 1, with the additional restriction that directory names cannot contain extensions and that some characters (notably hyphens) are not allowed in filenames. Level 2 allows filenames of up to 31 characters, more compatible with Mac OS filenames.

During the Microsoft antitrust trials, the names MICROS~1 and MICROS~2 were humorously used to refer to the companies that might exist after a proposed split of Microsoft.^[6]

Compatibility[link]

This legacy technology is used in a wide range of products and devices, as a standard for interchanging information, such as compact flash cards used in cameras. VFAT LFN Long filenames introduced by Windows 95/98/ME retained compatibility. But the VFAT LFN used on NT-based systems (Windows NT/2K/XP) uses a modified 8.3 shortname.

If a filename contains only lowercase letters, or is a combination of a lowercase basename with an uppercase extension, or vice-versa; and has no special characters, and fits within the 8.3 limits, a VFAT entry is not created on Windows NT and later versions such as XP. Instead, two bits in byte 0x0c of the directory entry are used to indicate that the filename should be considered as entirely or partially lowercase. Specifically, bit 4 means lowercase extension and bit 3 lowercase basename, which allows for combinations such as "example.TXT" or "HELLO.txt" but not "Mixed.txt". Few other operating systems support this. This creates a backwards-compatibility problem with older Windows versions (95, 98, ME) that see all-uppercase filenames if this extension has been used, and therefore can change the name of a file when it is transported, such as on a USB flash drive. Current 2.6.x versions of Linux will recognize this extension when reading (source: kernel 2.6.18 /fs/fat/dir.c and fs/vfat/namei.c); the mount option shortname determines whether this feature is used when writing.^[7]

Directory table[link]

A directory table is a special type of file that represents a directory. Each file or directory stored within it is represented by a 32-byte entry in the table. Each entry records the name, extension, attributes (archive, directory, hidden, read-only, system and volume), the date and time of creation, the address of the first cluster of the file/directory's data and finally the size of the file/directory.

Legal characters for DOS filenames include the following:

• Upper case letters A–Z
• Numbers 0–9
• Space (though trailing spaces in either the base name or the extension are considered to be padding and not a part of the filename, also filenames with spaces in them could not be used on the DOS command line because it lacked a suitable escaping system)
• ! # $ % & ' ( ) - @ ^ _ ` { } ~
• Values 128–255

This excludes the following ASCII characters:

• " * / : < > ? \ [ ] |
  Windows/MS-DOS has no shell escape character
• Lower case letters a–z
  stored as A–Z on FAT12/FAT16
• Control characters 0–31
• Value 127 (DEL)^{[dubious – discuss]}

Code 0xE5 as the first byte (see below) makes troubles when Cyrillic KOI8 encoding is used, because it corresponds to Cyrillic capital letter "Е". Some operating systems such as ANDOS used to automatically change the letter to the similar-looking Latin one.^{[citation needed]}

The DOS filenames are in the OEM character set.

Directory entries, both in the Root Directory Region and in subdirectories, are of the following format:

How to convert a long filename to a short filename[link]

Sometimes it may be desirable to convert a long filename to a short filename, for example when working with the command prompt. A few simple rules can be followed to attain the correct 8.3 filename.

1. A SFN filename can have at most 8 characters before the dot. If it has more than that, you should write the first 6, then put a tilde ~ as the seventh character and a number (usually 1) as the eighth. The number distinguishes it from other files with both the same first six letters and the same extension.

2. Dots are important and must be used even for folder names (if there is a dot in the folder name). If there are multiple dots in the long file/directory name, only the last one is used. The preceding dots should be ignored. If there are more characters than three after the final dot, only the first three are used.

3. Generally:

• Any spaces in the filenames should be ignored when converting to SFN.
• Ignore all dots except the last one. Leave out the other dots, just like the spaces.
• Commas and square brackets are changed to underscores.
• Case is not important, upper case and lower case characters are treated equally.

To find out for sure the SFN or 8.3 names of the files in a directory

use: "dir /x" shows the short names if there is one, and the long names.

or : "dir /-n" shows only the short names, in the original DIR listing format.

See also[link]

• Long filename
• File Allocation Table - FAT
• File system
• filename extension

References[link]