Pocket stereoscope with original test image. Used by military to examine stereoscopic pairs of aerial photographs.

View of Boston, c. 1860; an early stereoscopic card for viewing a scene from nature

Company of ladies watching stereoscopic photographs, painting by Jacob Spoel, before 1868. Probably the earliest depiction of people using a stereoscope.^{[citation needed]}

Stereoscopy (also called stereoscopics or 3-D imaging) refers to a technique for creating or enhancing the illusion of depth in an image by presenting two offset images separately to the left and right eye of the viewer. These two-dimensional images are then combined in the brain to give the perception of 3-D depth. Besides the technique of freeviewing, which must be learned by the viewer, three strategies have been used to mechanically present different images to each eye: have the viewer wear eyeglasses to combine separate images from two offset sources, have the viewer wear eyeglasses to filter offset images from a single source separated to each eye, or have the lightsource split the images directionally into the viewer's eyes (no glasses required; known as Autostereoscopy).^[1]

Background[link]

Stereoscopy creates the illusion of three-dimensional depth from images on a two-dimensional plane. Human vision uses several cues to determine relative depths in a perceived scene.^[2] Some of these cues are:

• Stereopsis
• Accommodation of the eye
• Occlusion of one object by another
• Subtended visual angle of an object of known size
• Linear perspective (convergence of parallel edges)
• Vertical position (objects higher in the scene generally tend to be perceived as further away)
• Haze, desaturation, and a shift to bluishness
• Change in size of textured pattern detail

All the above cues, with the exception of the first two, are present in traditional two-dimensional images such as paintings, photographs, and television. Stereoscopy is the enhancement of the illusion of depth in a photograph, movie, or other two-dimensional image by presenting a slightly different image to each eye, and thereby adding the first of these cues (stereopsis) as well. It is important to note that since all points in the image focus at the same plane regardless of their depth in the original scene, the second cue, focus, is still not duplicated and therefore the illusion of depth is incomplete.

Many 3D displays use this method to convey images. It was first invented by Sir Charles Wheatstone in 1838.^[3][4]

Wheatstone originally used his stereoscope (a rather bulky device)^[5] with drawings because photography was not yet available, yet his original paper seems to foresee the development of a realistic imaging method:^[6]

For the purposes of illustration I have employed only outline figures, for had either shading or colouring been introduced it might be supposed that the effect was wholly or in part due to these circumstances, whereas by leaving them out of consideration no room is left to doubt that the entire effect of relief is owing to the simultaneous perception of the two monocular projections, one on each retina. But if it be required to obtain the most faithful resemblances of real objects, shadowing and colouring may properly be employed to heighten the effects. Careful attention would enable an artist to draw and paint the two component pictures, so as to present to the mind of the observer, in the resultant perception, perfect identity with the object represented. Flowers, crystals, busts, vases, instruments of various kinds, &c., might thus be represented so as not to be distinguished by sight from the real objects themselves.^[3]

Stereoscopy is used in photogrammetry and also for entertainment through the production of stereograms. Stereoscopy is useful in viewing images rendered from large multi-dimensional data sets such as are produced by experimental data. An early patent for 3D imaging in cinema and television was granted to physicist Theodor V. Ionescu in 1936. Modern industrial three-dimensional photography may use 3D scanners to detect and record three-dimensional information.^[7] The three-dimensional depth information can be reconstructed from two images using a computer by corresponding the pixels in the left and right images (e.g.,^[8]). Solving the Correspondence problem in the field of Computer Vision aims to create meaningful depth information from two images.

Etymology[link]

The word stereoscopy derives from the Greek "στερεός" (stereos), "firm, solid"^[9] + "σκοπέω" (skopeō), "to look", "to see".^[10]

Visual requirements[link]

Anatomically, there are 3 levels of binocular vision required to view stereo images:

1. Simultaneous perception
2. Fusion (binocular 'single' vision)
3. Stereopsis

These functions develop in early childhood. Some people who have strabismus disrupt the development of stereopsis, however orthoptics treatment can be used to improve binocular vision. A person's stereoacuity determines the minimum image disparity they can perceive as depth.

Side-by-side (non-shared viewing scenarios)[link]

"The early bird catches the worm" Stereograph published in 1900 by North-Western View Co. of Baraboo, Wisconsin, digitally restored.

Traditional stereoscopic photography consists of creating a 3-D illusion starting from a pair of 2-D images, a stereogram. The easiest way to enhance depth perception in the brain is to provide the eyes of the viewer with two different images, representing two perspectives of the same object, with a minor deviation exactly equal to the perspectives that both eyes naturally receive in binocular vision.

If eyestrain and distortion are to be avoided, each of the two 2-D images preferably should be presented to each eye of the viewer so that any object at infinite distance seen by the viewer should be perceived by that eye while it is oriented straight ahead, the viewer's eyes being neither crossed nor diverging. When the picture contains no object at infinite distance, such as a horizon or a cloud, the pictures should be spaced correspondingly closer together.

The side-by-side method is extremely simple to create, but it can be difficult or uncomfortable to view without optical aids. One such aid for non-crossed images is the modern Pokescope. Traditional stereoscopes such as the Holmes can be used as well. Cross view technique now has the simple Perfect-Chroma cross viewing glasses to facilitate viewing.

Characteristics[link]

Little or no additional image processing is required. Under some circumstances, such as when a pair of images is presented for crossed or diverged eye viewing, no device or additional optical equipment is needed.

The principal advantages of side-by-side viewers is that there is no diminution of brightness so images may be presented at very high resolution and in full spectrum color. The ghosting associated with polarized projection or when color filtering is used is totally eliminated. The images are discretely presented to the eyes and visual center of the brain, with no co-mingling of the views. The recent advent of flat screens and "software stereoscopes" has made larger 3D digital images practical in this side by side mode, which hitherto had been used mainly with paired photos in print form.^{[citation needed]}

Left frame

Right frame

Parallel view

Cross-eye view

Comparison of images for parallel and cross-eye freeviewing.

Left frame

Right frame

Parallel view

Cross-eye view

Another example.

Freeviewing[link]

Freeviewing is viewing a side-by-side image without using a viewer.^[11]

• The parallel view method uses two images not more than 65mm between corresponding image points; this is the average distance between the two eyes. The viewer looks through the image while keeping the vision parallel; this can be difficult with normal vision since eye focus and binocular convergence normally work together.
• The cross-eyed view method uses the right and left images exchanged and views the images cross-eyed with the right eye viewing the left image and vice-versa. Prismatic, self masking glasses are now being used by cross-view advocates. These reduce the degree of convergence and allow large images to be displayed.

Several methods are available to freeview.^[12][13]

Wikimedia Commons has media related to: Parallel-view stereo images

Wikimedia Commons has media related to: Crosseye-view stereo images

Stereographic cards and the stereoscope[link]

Two separate images are printed side-by-side. When viewed without a stereoscopic viewer the user is required to force his eyes either to cross, or to diverge, so that the two images appear to be three. Then as each eye sees a different image, the effect of depth is achieved in the central image of the three.

The stereoscope offers several advantages:

• Using positive curvature (magnifying) lenses, the focus point of the image is changed from its short distance (about 30 to 40 cm) to a virtual distance at infinity. This allows the focus of the eyes to be consistent with the parallel lines of sight, greatly reducing eye strain.
• The card image is magnified, offering a wider field of view and the ability to examine the detail of the photograph.
• The viewer provides a partition between the images, avoiding a potential distraction to the user.

Disadvantages of stereo cards, slides or any other hard copy or print are that the two images are likely to receive differing wear, scratches and other decay. This results in stereo artifacts when the images are viewed. These artifacts compete in the mind resulting in a distraction from the 3d effect, eye strain and headaches.

Stereograms cards are frequently used by orthoptists and vision therapists in the treatment of many binocular vision and accommodative disorders.

In 2010, Hasbro started producing a stereoscope designed to hold an iPhone or iPod Touch, called the My3D. Apps on the mobile phone substitute for stereo cards. The underlying technology is otherwise unchanged from earlier stereoscopes.

• 

  Vintage stereoscopic picture (for parallel viewing)

• 

  Vintage stereoscopic picture (modified for cross viewing)

• 

  Stereogram of a flower (for cross viewing)

• 

  Stereoscopic picture of an eroded gravestone (for cross viewing)

Transparency viewers[link]

Stereoscope and case – during World War II this tool was used by Allied photo interpreters to analyze images shot from aerial photo reconnaissance platforms.

The practice of viewing film-based transparencies in stereo via a viewer dates to at least as early as 1931, when Tru-Vue began to market filmstrips that were fed through a handheld device made from Bakelite. In the 1940s, a modified and miniaturized variation of this technology was introduced as the View-Master. Pairs of stereo views are printed on translucent film which is then mounted around the edge of a cardboard disk, images of each pair being diametrically opposite. A lever is used to move the disk so as to present the next image pair. A series of seven views can thus be seen on each card when it was inserted into the View-Master viewer. These viewers were available in many forms both non-lighted and self-lighted and may still be found today. One type of material presented is children's fairy tale story scenes or brief stories using popular cartoon characters. These use photographs of three dimensional model sets and characters. Another type of material is a series of scenic views associated with some tourist destination, typically sold at gift shops located at the attraction.

Another important development in the late 1940s was the introduction of the Stereo Realist camera and viewer system. Using color slide film, this equipment made stereo photography available to the masses and caused a surge in its popularity. The Stereo Realist and competing products can still be found (in estate sales and elsewhere) and utilized today.

Low-cost folding cardboard viewers with plastic lenses have been used to view images from a sliding card and have been used by computer technical groups as part of annual convention proceedings. These have been supplanted by the DVD recording and display on a television set. By exhibiting moving images of rotating objects a three dimensional effect is obtained through other than stereoscopic means.

An advantage offered by transparency viewing is that a wider field of view may be presented since images, being illuminated from the rear, may be placed much closer to the lenses. Note that with simple viewers the images are limited in size as they must be adjacent and so the field of view is determined by the distance between each lens and its corresponding image.

Good quality wide angle lenses are quite expensive and they are not found in most stereo viewers.

Head-mounted displays[link]

An HMD with a separate video source displayed in front of each eye to achieve a stereoscopic effect

The user typically wears a helmet or glasses with two small LCD or OLED displays with magnifying lenses, one for each eye. The technology can be used to show stereo films, images or games, but it can also be used to create a virtual display. Head-mounted displays may also be coupled with head-tracking devices, allowing the user to "look around" the virtual world by moving their head, eliminating the need for a separate controller. Performing this update quickly enough to avoid inducing nausea in the user requires a great amount of computer image processing. If six axis position sensing (direction and position) is used then wearer may move about within the limitations of the equipment used. Owing to rapid advancements in computer graphics and the continuing miniaturization of video and other equipment these devices are beginning to become available at more reasonable cost.

Head-mounted or wearable glasses may be used to view a see-through image imposed upon the real world view, creating what is called augmented reality. This is done by reflecting the video images through partially reflective mirrors. The real world view is seen through the mirrors' reflective surface. Experimental systems have been used for gaming, where virtual opponents may peek from real windows as a player moves about. This type of system is expected to have wide application in the maintenance of complex systems, as it can give a technician what is effectively "x-ray vision" by combining computer graphics rendering of hidden elements with the technician's natural vision. Additionally, technical data and schematic diagrams may be delivered to this same equipment, eliminating the need to obtain and carry bulky paper documents.

Augmented stereoscopic vision is also expected to have applications in surgery, as it allows the combination of radiographic data (CAT scans and MRI imaging) with the surgeon's vision.

3D viewers[link]

An 1893-era World's Columbian Exposition viewer

There are two categories of 3D viewer technology, active and passive. Active viewers have electronics which interact with a display.

Active[link]

Liquid crystal shutter glasses[link]

Glasses containing liquid crystal that block or pass light through in synchronization with the images on the computer display, using the concept of alternate-frame sequencing. There have been many examples of shutter glasses over the past few decades, such as SegaScope 3-D glasses for the Sega Master System^[14] and the Atari/Tektronix Stereotek 3D system [1], but the Nvidia 3D Vision gaming kit introduced in 2008 introduced this technology to mainstream consumers and PC gamers.^[15] See also Time-division multiplexing.

"Red eye" shutterglasses method[link]

The Red Eye Method reduces the ghosting caused by the slow decay of the green and blue P22-type phosphors typically used in conventional CRT monitors. This method relies solely on the red component of the RGB image being displayed, with the green and blue component of the image being suppressed.^{[citation needed]}

Passive[link]

Linearly polarized glasses[link]

To present a stereoscopic motion picture, two images are projected superimposed onto the same screen through orthogonal polarizing filters. It is best to use a silver screen so that polarization is preserved. The projectors can receive their outputs from a computer with a dual-head graphics card. The viewer wears low-cost eyeglasses which also contain a pair of orthogonal polarizing filters. As each filter only passes light which is similarly polarized and blocks the orthogonally polarized light, each eye only sees one of the images, and the effect is achieved. Linearly polarized glasses require the viewer to keep his head level, as tilting of the viewing filters will cause the images of the left and right channels to bleed over to the opposite channel—along with misaligning the vision fields with those of the viewer's eyes. Therefore, viewers learn very quickly not to tilt their heads. As the motion picture provides the same stereoscopic image to all, and no head tracking is involved, several people can view the movie at the same time from a limited breadth of angles.

Circularly polarized glasses[link]

To present a stereoscopic motion picture, two images are projected superimposed onto the same screen through circular polarizing filters of opposite handedness. The viewer wears low-cost eyeglasses which contain a pair of analyzing filters (circular polarizers mounted in reverse) of opposite handedness. Light that is left-circularly polarized is extinguished by the right-handed analyzer, while right-circularly polarized light is extinguished by the left-handed analyzer. The result is similar to that of steroscopic viewing using linearly polarized glasses, except the viewer can tilt his or her head and still maintain left/right separation (though the tilt will still affect the brain's ability to fuse the two images and correctly perceive depth).

The RealD Cinema system uses an electronically driven circular polarizer, mounted in front of the projector and alternating between left- and right- handedness, in sync with the left or right image being displayed by the (digital) movie projector. The audience wears passive circularly polarized glasses.

Infitec glasses[link]

Infitec stands for interference filter technology. Special interference filters (dichromatic filters) in the glasses and in the projector form the main item of technology and have given it this name. The filters divide the visible color spectrum into six narrow bands – two in the red region, two in the green region, and two in the blue region (called R1, R2, G1, G2, B1 and B2 for the purposes of this description). The R1, G1 and B1 bands are used for one eye image, and R2, G2, B2 for the other eye. The human eye is largely insensitive to such fine spectral differences so this technique is able to generate full-color 3D images with only slight color differences between the two eyes.^[16] Sometimes this technique is described as a "super-anaglyph" because it is an advanced form of spectral-multiplexing which is at the heart of the conventional anaglyph technique.

Dolby uses a form of this technology in its Dolby 3D theatres.

Inficolor 3D[link]

Developed by TriOviz, Inficolor 3D is a patent pending stereoscopic system, first demonstrated at the International Broadcasting Convention in 2007 and deployed in 2010. It works with traditional 2D flat panels and HDTV sets and uses expensive glasses with complex color filters and dedicated image processing that allow natural color perception with a 3D experience.^[17] When observed without glasses, some slight doubling can be noticed in the background of the action which allows watching the movie or the video game in 2D without the glasses. This is not possible with traditional brute force anaglyphic systems.^[18]

Inficolor 3D is a part of TriOviz for Games Technology, developed in partnership with TriOviz Labs and Darkworks Studio. It works with Sony PlayStation 3 (Official PlayStation 3 Tools & Middleware Licensee Program)^[19] and Microsoft Xbox 360 consoles as well as PC.^[20][21] TriOviz for Games Technology was showcased at Electronic Entertainment Expo 2010 by Mark Rein (vice president of Epic Games) as a 3D tech demo running on an Xbox 360 with Gears of War 2.^[22] In October 2010 this technology has been officially integrated in Unreal Engine 3,^[20][21] the computer game engine developed by Epic Games.

Video games equipped with TriOviz for Games Technology are: "Batman Arkham Asylum: Game of the Year Edition" for PS3 and Xbox 360 (March 2010),^[23][24][25] "Enslaved: Odyssey to the West + DLC Pigsy's Perfect 10" for PS3 and Xbox 360 (Nov. 2010),^[26][27] "Thor: God of Thunder" for PS3 and Xbox 360 (May 2011), "Green Lantern: Rise of the Manhunters" for PS3 and Xbox 360 (June 2011), "Captain America: Super Soldier" for PS3 and Xbox 360 (July 2011). "Gears of War 3" for Xbox 360 (September 2011), "Batman: Arkham City" for PS3 and Xbox 360 (October 2011), "Assassin's Creed: Revelations" for PS3 and Xbox 360 (November 2011). The first DVD/Blu-ray including Inficolor 3D Tech is: "Battle for Terra 3D" (published in France by Pathé & Studio 37 - 2010).

Complementary color anaglyphs[link]

Full color Anachrome red (left eye)
and cyan (right eye) filters
3D red cyan glasses are recommended to view this image correctly.

Complementary color anaglyphs employ one of a pair of complementary color filters for each eye. The most common color filters used are red and cyan. Employing tristimulus theory, the eye is sensitive to three primary colors, red, green, and blue. The red filter admits only red, while the cyan filter blocks red, passing blue and green (the combination of blue and green is perceived as cyan). If a paper viewer containing red and cyan filters is folded so that light passes through both, the image will appear black. Another recently introduced form employs blue and yellow filters. (Yellow is the color perceived when both red and green light passes through the filter.)

Anaglyph images have seen a recent resurgence because of the presentation of images on the Internet. Where traditionally, this has been a largely black & white format, recent digital camera and processing advances have brought very acceptable color images to the internet and DVD field. With the online availability of low cost paper glasses with improved red-cyan filters, and plastic framed glasses of increasing quality, the field of 3D imaging is growing quickly. Scientific images where depth perception is useful include, for instance, the presentation of complex multi-dimensional data sets and stereographic images of the surface of Mars. With the recent release of 3D DVDs, they are more commonly being used for entertainment. Anaglyph images are much easier to view than either parallel sighting or crossed eye stereograms, although these types do offer more bright and accurate color rendering, most particularly in the red component, which is commonly muted or desaturated with even the best color anaglyphs. A compensating technique, commonly known as Anachrome, uses a slightly more transparent cyan filter in the patented glasses associated with the technique. Processing reconfigures the typical anaglyph image to have less parallax to obtain a more useful image when viewed without filters.

Compensating diopter glasses for red-cyan method[link]

Anaglyph of Sunflower seeds

Simple sheet or uncorrected molded glasses do not compensate for the 250 nanometer difference in the wave lengths of the red-cyan filters. With simple glasses, the red filter image can be blurry when viewing a close computer screen or printed image since the retinal focus differs from the cyan filtered image, which dominates the eyes' focusing. Better quality molded plastic glasses employ a compensating differential diopter power to equalize the red filter focus shift relative to the cyan. The direct view focus on computer monitors has been recently improved by manufacturers providing secondary paired lenses fitted and attached inside the red-cyan primary filters of some high end anaglyph glasses. They are used where very high resolution is required, including science, stereo macros, and animation studio applications. They use carefully balanced cyan (blue-green) acrylic lenses, which pass a minute percentage of red to improve skin tone perception. Simple red/blue glasses work well with black and white, but the blue filter is unsuitable for human skin in color.

ColorCode 3D[link]

Barack and Michelle Obama, along with their party, watch the commercials during Super Bowl XLIII in the White House theatre using ColorCode 3D.

ColorCode 3D is a newer, patented^[28] stereo viewing system deployed in the 2000s that uses amber and blue filters. Notably, unlike other anaglyph systems, ColorCode 3D is intended to provide perceived nearly full color viewing (particularly within the RG color space) with existing television and paint mediums. One eye (left, amber filter) receives the cross-spectrum color information and one eye (right, blue filter) sees a monochrome image designed to give the depth effect. The human brain ties both images together.

Images viewed without filters will tend to exhibit light-blue and yellow horizontal fringing. The backwards compatible 2D viewing experience for viewers not wearing glasses is improved, generally being better than previous red and green anaglyph imaging systems, and further improved by the use of digital post-processing to minimize fringing. The displayed hues and intensity can be subtly adjusted to further improve the perceived 2D image, with problems only generally found in the case of extreme blue.

The blue filter is centered around 450 nm and the amber filter lets in light at wavelengths at above 500 nm. Wide spectrum color is possible because the amber filter lets through light across most wavelengths in spectrum. When presented via RGB color model televisions, the original red and green channels from the left image are combined with a monochrome blue channel formed by averaging the right image with the weights Failed to parse (Missing texvc executable; please see math/README to configure.): \{r:0.15, g:0.15, b:0.7\} .

In the United Kingdom, television station Channel 4 commenced broadcasting a series of programs encoded using the system during the week of 16 November 2009.^[29] Previously the system had been used in the United States for an "all 3-D advertisement" during the 2009 Super Bowl for SoBe, Monsters vs. Aliens animated movie and an advertisement for the Chuck television series in which the full episode the following night used the format.

Chromadepth method and glasses[link]

The ChromaDepth procedure of American Paper Optics is based on the fact that with a prism, colors are separated by varying degrees. The ChromaDepth eyeglasses contain special view foils, which consist of microscopically small prisms. This causes the image to be translated a certain amount that depends on its color. If one uses a prism foil now with one eye but not on the other eye, then the two seen pictures – depending upon color – are more or less widely separated. The brain produces the spatial impression from this difference. The advantage of this technology consists above all of the fact that one can regard ChromaDepth pictures also without eyeglasses (thus two-dimensional) problem-free (unlike with two-color anaglyph). However the colors are only limitedly selectable, since they contain the depth information of the picture. If one changes the color of an object, then its observed distance will also be changed.^{[citation needed]}

Anachrome "compatible" color anaglyph method[link]

Anachrome optical diopter glasses.

A recent variation on the anaglyph technique is called "Anachrome method".^{[citation needed]} This approach is an attempt to provide images that look fairly normal without glasses as 2D images to be "compatible" for posting in conventional websites or magazines. The 3D effect is generally more subtle, as the images are shot with a narrower stereo base, (the distance between the camera lenses). Pains are taken to adjust for a better overlay fit of the two images, which are layered one on top of another. Only a few pixels of non-registration give the depth cues. The range of color is perhaps three times wider in Anachrome^{[citation needed]} due to the deliberate passage of a small amount of the red information through the cyan filter. Warmer tones can be boosted,^{[citation needed]} and this is claimed to provide warmer skin tones and vividness.^{[citation needed]}

Printable cross eye viewer.

Pulfrich[link]

The Pulfrich effect is based on the phenomenon of the human eye processing images more slowly when there is less light, as when looking through a dark lens. Because the Pulfrich effect depends on motion in a particular direction to instigate the illusion of depth, it is not useful as a general stereoscopic technique. For example, it cannot be used to show a stationary object apparently extending into or out of the screen; similarly, objects moving vertically will not be seen as moving in depth. Incidental movement of objects will create spurious artifacts, and these incidental effects will be seen as artificial depth not related to actual depth in the scene.

Other display methods[link]

Autostereoscopy[link]

Autostereoscopic display technologies use optical components in the display, rather than worn by the user, to enable each eye to see a different image. Because headgear is not required, it is also called "glasses-free 3D". The optics split the images directionally into the viewer's eyes, so the display viewing geometry requires limited head positions that will achieve the stereoscopic effect. Automultiscopic displays provide multiple views of the same scene, rather than just two. Each view is visible from a different range of positions in front of the display. This allows the viewer to move left-right in front of the display and see the correct view from any position. The technology includes two broad classes of displays: those that use head-tracking to ensure that each of the viewer's two eyes sees a different image on the screen, and those that display multiple views so that the display does not need to know where the viewers' eyes are directed. Examples of autostereoscopic displays include parallax barriers, lenticular lens, specular holography and volumetric, electro-holographic, and light field displays.

Some autostereoscopic displays are also capable of recreating a perception of movement parallax, which is not possible with any of the active or passive technologies discussed above. "Movement parallax" refers to the fact that the view of a scene changes with movement of the head. Thus, different images of the scene are seen as the head is moved from left to right, and from up to down.

This is the method used by the Nintendo 3DS video game system and the Optimus 3D and LG Thrill by cellphone manufacturer LG Electronics MobileComm. USA. HTC Evo 3D cellphone also utilizes the parallax barrier for 3D still photography and video.

A fundamentally new approach to autostereoscopy, called HR3D has been developed by researcher from MIT's Media Lab. It would consume half as much power, doubling the battery life if used with devices like the Nintendo 3DS, without compromising screen brightness or resolution. And having other advantages such as bigger viewing angle and it would maintain the 3D effect even when the screen is rotated.^[30]

Computer-generated holography[link]

Research into holographic displays has produced devices which are able to create a light field identical to that which would emanate from the original scene, with both horizontal and vertical parallax across a large range of viewing angles. The effect is similar to looking through a window at the scene being reproduced; this may make CGH the most convincing of the 3D display technologies, but as yet the large amounts of calculation required to generate a detailed hologram largely prevent its application outside of the laboratory.

Volumetric displays[link]

Volumetric displays use some physical mechanism to display points of light within a volume. Such displays use voxels instead of pixels. Volumetric displays include multiplanar displays, which have multiple display planes stacked up, and rotating panel displays, where a rotating panel sweeps out a volume.

Other technologies have been developed to project light dots in the air above a device. An infrared laser is focused on the destination in space, generating a small bubble of plasma which emits visible light.

Wiggle stereography[link]

Wiggle stereoscopy is an image display technique achieved by quickly alternating display of left and right sides of a stereogram. Found in animated GIF format on the web.

Taking the pictures[link]

The Stereo Realist, which defined a new stereo format.

Sputnik stereo camera (Soviet Union, 1960-s). Although there are three lenses present, only the lower two are used for the photograph – the third lens serves as a viewfinder for composition. The Sputnik produces two side-by-side square images on 120 film.

It is necessary to take two photographs for a stereoscopic image. This can be done with two cameras, with one camera moved quickly to two positions, or with a stereo camera incorporating two or more side-by-side lenses.

In the 1950s, stereoscopic photography regained popularity when a number of manufacturers began introducing stereoscopic cameras to the public. The new cameras were developed to use 135 film, which had gained popularity after the close of World War II. Many of the conventional cameras used the film for 35 mm transparency slides, and the new stereoscopic cameras utilized the film to make stereoscopic slides. The Stereo Realist camera was the most popular, and its 5P picture format became a standard. The stereoscopic cameras were marketed with special viewers that allowed for the use of such slides. With these cameras the public could easily create their own stereoscopic memories. Although their popularity has waned, some of these cameras are still in use today.

The 1980s saw a minor revival of stereoscopic photography extent when point-and-shoot stereo cameras were introduced. Most of these cameras suffered from poor optics and plastic construction, and were designed to produce lenticular prints, a format which never gained wide acceptance, so they never gained the popularity of the 1950s stereo cameras.

The beginning of the 21st century marked the coming of the age of digital photography. Stereo lenses were introduced which could turn an ordinary film camera into a stereo camera by using a special double lens to take two images and direct them through a single lens to capture them side-by-side on the film. Although current digital stereo cameras cost hundreds of dollars,^[31] cheaper models also exist, for example those produced by the company Loreo. It is also possible to create a twin camera rig, together with a "shepherd" device to synchronize the shutter and flash of the two cameras. By mounting two cameras on a bracket, spaced a bit, with a mechanism to make both take pictures at the same time. Newer cameras are even being used to shoot "step video" 3D slide shows with many pictures almost like a 3D motion picture if viewed properly. A modern camera can take five pictures per second, with images that greatly exceed HDTV resolution.

If anything is in motion within the field of view, it is necessary to take both images at once, either through use of a specialized two-lens camera, or by using two identical cameras, operated as close as possible to the same moment.

A single camera can also be used if the subject remains perfectly still (such as an object in a museum display). Two exposures are required. The camera can be moved on a sliding bar for offset, or with practice, the photographer can simply shift the camera while holding it straight and level. This method of taking stereo photos is sometimes referred to as the "Cha-Cha" or "Rock and Roll" method.^[32] It is also sometimes referred to as the "astronaut shuffle" because it was used to take stereo pictures on the surface of the moon using normal monoscopic equipment.^[33]

For the most natural looking stereo most stereographers move the camera about 65mm or the distance between the eyes,^[34] but some experiment with other distances. A good rule of thumb is to shift sideways 1/30th of the distance to the closest subject for 'side by side' display, or just 1/60th if the image is to be also used for color anaglyph or anachrome image display. For example, when enhanced depth beyond natural vision is desired and a photo of a person in front of a house is being taken, and the person is thirty feet away, then the camera should be moved 1 foot between shots.^[34]

The stereo effect is not significantly diminished by slight pan or rotation between images. In fact slight rotation inwards (also called 'toe in') can be beneficial. Bear in mind that both images should show the same objects in the scene (just from different angles) - if a tree is on the edge of one image but out of view in the other image, then it will appear in a ghostly, semi-transparent way to the viewer, which is distracting and uncomfortable. Therefore, you can either crop the images so they completely overlap, or you can 'toe-in' the cameras so that the images completely overlap without having to discard any of the images. However, be a little cautious - too much 'toe-in' can cause eye strain for reasons best described here.^[35]

Here you can find (in different languages) an excellent article about The Ten Commandments of Stereoscopy for taking good stereoscopy images (photo & video).

Base line selection[link]

For general purpose stereo photography, where the goal is to duplicate natural human vision and give a visual impression as close as possible to actually being there, the correct baseline (distance between where the right and left images are taken) would be the same as the distance between the eyes.^[36] When images taken with such a baseline are viewed using a viewing method that duplicates the conditions under which the picture is taken then the result would be an image pretty much the same as what you would see if you were actually there. This could be described as "ortho stereo."

An example would be the Realist format that was so popular in the late 1940s to mid 1950s and is still being used by some today. When these images are viewed using high quality viewers, or seen with a properly set up projector, the impression is, indeed, very close to what you would see if you were there.

The baseline used in such cases will be about 50mm to 80mm. This is what is generally referred to as a "normal" baseline, used in most stereo photography. There are, however, situations where it might be desirable to use a longer or shorter baseline. The factors to consider include the viewing method to be used and the goal in taking the picture.

Longer base line for distant objects "Hyper Stereo"[link]

If a stereo picture is taken of a large, distant object such as a mountain or a large building using a normal base it will appear to be flat.^[37] This is in keeping with normal human vision, it would look flat if you were actually there, but if the object looks flat, there doesn't seem to be any point in taking a stereo picture, as it will simply seem to be behind a stereo window, with no depth in the scene itself, much like looking at a flat photograph from a distance.

One way of dealing with this situation is to include a foreground object to add depth interest and enhance the feeling of "being there", and this is the advice commonly given to novice stereographers.^[38][39] Caution must be used, however, to ensure that the foreground object is not too prominent, and appears to be a natural part of the scene, otherwise it will seem to become the subject with the distant object being merely the background.^[40] In cases like this, if the picture is just one of a series with other pictures showing more dramatic depth, it might make sense just to leave it flat, but behind a window.^[40]

Moon stereo from 1897 taken using libration. Anaglyph, red left.

For making stereo images featuring only a distant object (e.g., a mountain with foothills), the camera positions can be separated by a larger distance (called the "interaxial" or stereo base, often mistakenly called "interocular") than the adult human norm of 62-65mm. This will effectively render the captured image as though it was seen by a giant, and thus will enhance the depth perception of these distant objects, and reduce the apparent scale of the scene proportionately.^[41] However, in this case care must be taken not to bring objects in the close foreground too close to the viewer, as they will show excessive parallax and can complicate stereo window adjustment.

There are two main ways to accomplish this. One is to use two cameras separated by the required distance, the other is to shift a single camera the required distance between shots.

The shift method has been used with cameras such as the Stereo Realist to take hypers, either by taking two pairs and selecting the best frames, or by alternately capping each lens and recocking the shutter.^[37][42]

It is also possible to take hyperstereo pictures using an ordinary single lens camera aiming out an airplane. One must be careful, however, about movement of clouds between shots.^[43]

It has even been suggested that a version of hyperstereo could be used to help pilots fly planes.^[44]

In such situations, where an ortho stereo viewing method is used, a common rule of thumb is the 1:30 rule.^[45] This means that the baseline will be equal to 1/30 of the distance to the nearest object included in the photograph.

The results of hyperstereo can be quite impressive,^[46][47][48] and examples of hyperstereo can be found in vintage views.^[49]

This technique can be applied to 3D imaging of the Moon: one picture is taken at moonrise, the other at moonset, as the face of the Moon is centered towards the center of the Earth and the diurnal rotation carries the photographer around the perimeter, though the results are rather poor,^[50] and much better results can be obtained using alternative techniques.^[50]

This is why high quality published stereos of the moon are done using libration,^{[51][52] [53][54]} the slight "wobbling" of the moon on its axis relative to the earth.^[55] Similar techniques were used late in the 19th century to take stereo views of Mars and other astronomical subjects.^[55]

Limitations of hyperstereo[link]

Vertical alignment can become a big problem, especially if the terrain on which the two camera positions are placed is uneven.

Movement of objects in the scene can make syncing two widely separated cameras a nightmare. When a single camera is moved between two positions even subtle movements such as plants blowing in the wind and the movement of clouds can become a problem.^[42] The wider the baseline, the more of a problem this becomes.

Pictures taken in this fashion take on the appearance of a miniature model, taken from a short distance,^[56][57][58] and those not familiar with such pictures often cannot be convinced that it is the real object. This is because we cannot see depth when looking at such scenes in real life and our brains aren't equipped to deal with the artificial depth created by such techniques, and so our minds tell us it must be a smaller object viewed from a short distance, which would have depth. Though most eventually realize it is, indeed, an image of a large object from far away, many find the effect bothersome.^[59] This doesn't rule out using such techniques, but it is one of the factors that need to be considered when deciding whether or not such a technique should be used.

Hyper stereo can also lead to cardboarding, an effect that creates stereos in which different objects seem well separated in depth, but the objects themselves seem flat. This is because parallax is quantized.^[60]

Illustration of parallax multiplication limits with A at 30 and 2000 feet

Illustration of the limits of parallax multiplication, refer to image at left. Ortho viewing method assumed. The line represents the Z axis, so imagine that it is laying flat and stretching into the distance. If the camera is at X point A is on an object at 30 feet. Point B is on an object at 200 feet and point C is on the same object but 1 inch behind B. Point D is on an object 250 feet away. With a normal baseline point A is clearly in the foreground, with B,C, and D all at stereo infinity. With a one foot base line, which multiplies the parallax, there will be enough parallax to separate all four points, though the depth in the object containing B and C will still be subtle. If this object is the main subject, we may consider a baseline of 6 feet 8 inches but then the object at A would need to be cropped out. Now imagine that the camera is point Y, now the object at A is at 2,000 feet, point B is on an object at 2,170 feet C is a point on the same object 1 inch behind B. Point D is on an object at 2,220 feet. With a normal baseline, all four points are now at stereo infinity. With a 67 foot basline, the multiplied parallax allows us to see that all three objects are on different planes, yet points B and C, on the same object, appear to be on the same plane and all three objects appear flat. This is because there are discrete units of parallax, so at 2,170 feet the parallax between B and C is zero and zero multiplied by any number is still zero.

A practical example[link]

In the red-cyan anaglyph example below, a ten-meter baseline atop the roof ridge of a house was used to image the mountain. The two foothill ridges are about four miles (6.5 km) distant and are separated in depth from each other and the background. The baseline is still too short to resolve the depth of the two more distant major peaks from each other. Owing to various trees that appeared in only one of the images the final image had to be severely cropped at each side and the bottom.

In the wider image, taken from a different location, a single camera was walked about one hundred feet (30 m) between pictures. The images were converted to monochrome before combination.(below)

Long base line image showing prominent foothill ridges; click the image for more information on the technique 3D red cyan glasses are recommended to view this image correctly.

Small anaglyphed image 3D red cyan glasses are recommended to view this image correctly.

Shorter baseline for ultra closeups "Macro stereo"[link]

Left frame

Right frame

Parallel view

Cross-eye view

Closeup stereo of a cake photographed using a Fuji W3. Taken by backing off several feet and then zooming in.

A mineral specimen imaged with scanner. Anaglyph, red left.

When objects are taken from closer than about 6 1/2 feet a normal base will produce excessive parallax and thus exaggerated depth when using ortho viewing methods. At some point the parallax becomes so great that the image is difficult or even impossible to view. For such situations, it becomes necessary to reduce the baseline in keeping with the 1:30 rule.

When still life scenes are stereographed, an ordinary single lens camera can be moved using a slide bar or similar method to generate a stereo pair. Multiple views can be taken and the best pair selected for the desired viewing method.

For moving objects, a more sophisticated approach is used. In the early 1970s, Realist incorporated introduced the Macro Realist designed to stereograph subjects 4 to 5 1/2 inches away, for viewing in Realist format viewers and projectors. It featured a 15mm base and fixed focus.^[61] It was invented by Clarence G. Henning.^[62]

In recent years cameras have been produced which are designed to stereograph subjects 10" to 20" using print film, with a 27mm baseline.^[63] Another technique, usable with fixed base cameras such as the Fujifilm FinePix Real 3D W1/W3 is to back off from the subject and use the zoom function to zoom to a closer view, such as was done in the image of a cake. This has the effect of reducing the effective baseline. Similar techniques could be used with paired digital cameras.

Another way to take images of very small objects, "extreme macro", is to use an ordinary flatbed scanner. This is a variation on the shift technique in which the object is turned upside down and placed on the scanner, scanned, moved over and scanned again. This produces stereos of a range objects as large as about 6" across down to objects as small as a carrot seed. This technique goes back to at least 1995. See the article Scanography for more details.

Baseline tailored to viewing method[link]

How far the picture is viewed from requires a certain separation between the cameras. This separation is called stereo base or stereo base line and results from the ratio of the distance to the image to the distance between the eyes (usually about 2.5 inches). In any case the farther the screen is viewed from the more the image will pop out. The closer the screen is viewed from the flatter it will appear. Personal anatomical differences can be compensated for by moving closer or farther from the screen.

To provide close emulation of natural vision for images viewed on a computer monitor,a fixed stereo base of 6 cm might be appropriate. This will vary depending on the size of the monitor and the viewing distance. For hyper stereo, a ratio smaller than 1:30 could be used. For example if a stereo image is to be viewed on a computer monitor from a distance of 1000 mm there will be an eye to view ratio of 1000/63 or about 16. To set the cameras the appropriate distance apart for the desired effect, the distance to the subject (say a person at a distance from the cameras of 3 meters) is divided by 16 which yields a stereo base of 188 mm between the cameras.

However, images optimized for a small screen viewed from a short distance will show excessive parallax when viewed with more ortho methods, such as a projected image or a head mounted display, possibly causing eyestrain and headaches, or doubling, so pictures optimized for this viewing method may not be usable with other methods.

Where images may also be used for anaglyph display a narrower base, say 40mm or a variable base of 1:50 or 1:60 will allow for less ghosting in the display.

Variable Base for "Geometric Stereo"[link]

As mentioned previously, the goal of the photographer may be a reason for using a baseline that is larger than normal. Such is the case when, instead of trying to achieve a close emulation to natural vision, a stereographer may be trying to achieve geometric perfection. This approach means that objects are shown with the shape they actually have, rather than the way they are seen by humans.

Objects at 25 to 30 feet, instead of having the subtle depth that you would see if you were actually there, or what would be recorded with a normal baseline, will have the much more dramatic depth that would be seen from 7 to 10 feet. So instead seeing objects as you would with eyes 2 1/2" apart, you see them as they would appear if your eyes were 12" apart. In other words, the baseline is chosen to produce the same depth effect, regardless of the distance from the subject. As with true ortho, this effect is impossible to achieve in a literal sense, since different objects in the scene will be at different distances and will thus show different amounts of parallax, but the geometric stereographer, like the ortho stereographer attempts to come as close as possible.

Achieving this could be as simple as using the 1:30 rule to find a custom base for every shot, regardless of distance, or it could involve using a more complicated formula.^[64]

This could be thought of as a form of hyperstereo,^[65] but less extreme. As a result, it has all of the same limitations of hyperstereo. When objects are given enhanced depth, but not magnified to take up a larger portion of the view, there is a certain miniaturization effect. Of course, this may be exactly what the stereographer has in mind.

While geometric stereo neither attempts nor achieves a close emulation of natural vision, there are valid reasons for this approach. It does, however, represent a very specialized branch of stereography.

Precise stereoscopic baseline calculation methods[link]

Recent research has led to precise methods for calculating the stereoscopic camera baseline.^[66] These techniques consider the geometry of the display/viewer and scene/camera spaces independently and can be used to reliably calculate a mapping of the scene depth being captured to a comfortable display depth budget. This frees up the photographer to place their camera wherever they wish to achieve the desired composition and then use the baseline calculator to work out the camera inter-axial separation required to produce a high quality 3D image.

This approach means there is no guess work in the stereoscopic setup once a small set of parameters have been measured, it can be implemented for photography and computer graphics and the methods can be easily implemented in a software tool.

Multi-rig stereoscopic cameras[link]

The precise methods for camera control have also allowed the development of multi-rig stereoscopic cameras where different slices of scene depth are captured using different inter-axial settings,^[67] the images of the slices are then composed together to form the final stereoscopic image pair. This allows important regions of a scene to be given better stereoscopic representation while less important regions are assigned less of the depth budget. It provides stereographers with a way to manage composition within the limited depth budget of each individual display technology.

See also[link]

Technological

Basics:

• Multiscopy (including Integral imaging, Holography, Lenticular printing)
• Autostereoscopy - stereoscopy without headgear
• Stereogram
• Binocular vision and Stereopsis

Formats which can represent 3D stereo images:

• 2D plus Delta
• 2D-plus-depth
• Multiview Video Coding
• Blu-ray 3D

Commercialized 3D display technologies:

• PHSCologram - a particular implementation of parallax-based multiscopy
• Dolby 3D - 3D glasses which split images by color wavelength
• RealD Cinema - 3D glasses which split images by circular polarization
• Panavision 3D - 3D glasses which split images with optical thin film filters
• XpanD 3D - 3D glasses using active LCD shutters to alternate left/right images

Medical:

• Orthoptics - diagnosis and treatment of defective eye movement and coordination
• Vision therapy

Historical and cultural:

Variants:

• Les Diableries

Video game industry:

• List of stereoscopic video games

Places, associations, companies:

• 3D Center of Art and Photography
• International Stereoscopic Union
• MasterImage 3D

People:

• Jackie Matisse
• Jules Duboscq
• Theodor V. Ionescu

Marketing terms:

• 4D film - Marketing term for a 3D film plus audience-interactive effects

References[link]

• Simmons, Gordon (March/April 1996). "Clarence G. Henning: The Man Behind the Macro". Stereo World 23 (1): 37–43. 
• Willke, Mark A.; Zakowski, Ron (March/April 1996). "A Close Look into the Realist Macro Stereo System". Stereo World 23 (1): 14–35. 
• Morgan, Willard D.; Lester, Henry M. (October 1954). Stereo Realist Manual. and 14 contributors. New York: Morgan & Lester. OCLC 789470. 

External links[link]

Wikimedia Commons has media related to: Stereoscopy

• The Quantitative Analysis of Stereoscopic Effect
• Durham Visualization Laboratory stereoscopic imaging methods and software tools
• University of Washington Libraries Digital Collections Stereocard Collection
• Stereographic Views of Louisville and Beyond, 1850s-1930 from the University of Louisville Libraries
• Stereoscopy on Flickr
• Extremely rare and detailed Stereoscopic 3D scenes
• International Stereoscopic Union
• 3D STEREO PORTAL for FREE Videos|Photo Collection | and more... FOR FREE 100%

James Cameron
James Cameron in February 2010
Born	James Francis Cameron (1954-08-16) August 16, 1954 (age 57) Kapuskasing, Ontario
Residence	Permanent Los Angeles, California, secondary Permanent New Zealand
Nationality	Canadian
Citizenship	Canada
Education	Brea Olinda High School
Alma mater	Fullerton College
Occupation	Film director, producer, editor, screenwriter, environmentalist, explorer
Years active	1978–present
Notable work(s)	The Terminator, Terminator 2: Judgment Day, Avatar, Titanic, Aliens, True Lies, The Abyss
Influenced by	Stanley Kubrick, Edgar Rice Burroughs, Ridley Scott, George Lucas, Roger Corman, Steven Spielberg
Influenced	Joss Whedon, Kathryn Bigelow, Rupert Wyatt, Sam Raimi, Robert Rodriguez
Home town	Chippawa, Ontario
Net worth	$650 million (est.)[1]

James Francis Cameron^[2] (born August 16, 1954) is a Canadian film director, film producer, deep-sea explorer, screenwriter, visual artist and editor.^[3][4][5][6] His writing and directing work includes Piranha II: The Spawning (1981), The Terminator (1984), Aliens (1986), The Abyss (1989), Terminator 2: Judgment Day (1991), True Lies (1994), Titanic (1997), Dark Angel (2000–02), and Avatar (2009). In the time between making Titanic and Avatar, Cameron spent several years creating many documentary films (specifically underwater documentaries) and co-developed the digital 3D Fusion Camera System. Described by a biographer as part-scientist and part-artist,^[7] Cameron has also contributed to underwater filming and remote vehicle technologies.^[5][6][8] On March 26, 2012, Cameron reached the bottom of the Mariana Trench, the deepest part of the ocean, in the Deepsea Challenger submersible.^[9][10][11]

He has been nominated for six Academy Awards overall and won three for Titanic. In total, Cameron's directorial efforts have grossed approximately US$2 billion in North America and US$6 billion worldwide.^[12] Without adjusting for inflation, Cameron's Titanic and Avatar are the two highest-grossing films of all time at $2.16 billion and $2.78 billion respectively.^[13] In March 2011 he was named Hollywood's top earner by Vanity Fair, with estimated 2010 earnings of $257 million.^[14]

Background[link]

Cameron was born in Kapuskasing, Ontario, Canada, 1954, the son of Shirley (Lowe), an artist and nurse, and Phillip Cameron.^[15][16] His paternal great-great-great-grandfather emigrated from Balquhidder, Scotland in 1825;^[15] thus, he descends from Clan Cameron.

Cameron grew up in Chippawa, Ontario with his brother Davie Cameron and attended Stamford Collegiate School in Niagara Falls; his family moved to Brea, California in 1971 when he was 17.^[17] Cameron enrolled at Fullerton College, a 2-year community college, in 1973 to study physics. He switched to English, then dropped out before the start of the fall 1974 semester.^[18]

After dropping out of Sonora High School, he went to further his secondary education at Brea Olinda High School. After graduating, he worked several jobs such as truck driving and wrote when he had time.^[19] During this period he taught himself about special effects: "I'd go down to the USC library and pull any thesis that graduate students had written about optical printing, or front screen projection, or dye transfers, anything that related to film technology. That way I could sit down and read it, and if they'd let me photocopy it, I would. If not, I'd make notes."^[20]

After seeing the original Star Wars film in 1977, Cameron quit his job as a truck driver to enter the film industry.^[21] When Cameron read Syd Field's book Screenplay, it occurred to him that integrating science and art was possible, and he wrote a ten-minute science fiction script with two friends, entitled Xenogenesis. They raised money and rented camera, lenses, film stock, and studio, and shot it in 35mm. To understand how to operate the camera, they dismantled it and spent the first half-day of the shoot trying to figure out how to get it running.

Early career[link]

While continuing to educate himself in film-making techniques, Cameron started working as a miniature-model maker at Roger Corman Studios.^[19] Making rapidly produced, low-budget productions taught Cameron to work efficiently and effectively. He soon found employment as an art director in the sci-fi movie Battle Beyond the Stars (1980). He did special effects work design and direction on John Carpenter's Escape from New York (1981), acted as production designer on Galaxy of Terror (1981), and consulted on the design of Android (1982).^[22]

Cameron was hired as the special effects director for the sequel of Piranha, entitled Piranha II: The Spawning in 1981. The original director, Miller Drake, left the project due to creative differences with Ovidio Assonitis. Cameron was hired by Assonitis to take over, giving him his first directorial job. (He had worked previously with producer Roger Corman.) The interior scenes were filmed in Italy while the underwater diving sequences were shot at Grand Cayman Island.^[23]

The movie was to be produced in Jamaica. On location, production slowed down due to numerous problems and adverse weather conditions. James Cameron was fired after failing to get a close up of Carole Davis in her opening scene. Ovidio ordered Cameron to do the close-up the next day before he started on that day’s shooting. Cameron spent the entire day sailing around the resort to reproduce the lighting but still failed to get the close-up. After he was fired, Ovidio invited Cameron to stay on location and assist in the shooting. Once in Rome, Ovidio took over the editing when Cameron was stricken with food poisoning. Suffering from his illness, one night he had a nightmare about an invincible robot hitman sent from the future to kill him, giving him the idea for The Terminator, which would later catapult his filming career.^[23]

Major films[link]

[edit] The Terminator (1984)

Cameron in September 1986

After completing a screenplay for The Terminator, Cameron decided to sell it so that he could direct the movie. However, the production companies he contacted, while expressing interest in the project, were unwilling to let a largely inexperienced feature film director make the movie. Finally, Cameron found a company called Hemdale Pictures, which was willing to let him direct. Gale Anne Hurd, who had started her own production company, Pacific Western Productions, had previously worked with Cameron in Roger Corman's company and agreed to buy Cameron's screenplay for one dollar, on the condition that Cameron direct the film. Hurd was signed on as producer, and Cameron finally got his first break as director. Orion Pictures distributed the film.^[24]

Initially, for the role of the Terminator, Cameron wanted someone who wasn't exceptionally muscular, and who could "blend into" a normal crowd. Lance Henriksen, who had starred in Piranha II: The Spawning, was considered for the title role, but when Arnold Schwarzenegger and Cameron first met over lunch to discuss Schwarzenegger playing the role of Kyle Reese, both came to the conclusion that the cyborg villain would be the more compelling role for the Austrian bodybuilder; Henriksen got the smaller part of LAPD detective Hal Vukovich and the role of Kyle Reese went to Michael Biehn. In addition, Linda Hamilton first appeared in this film in her iconic role of Sarah Connor, and later married Cameron.^[16]

The Terminator was a box office hit, breaking expectations by Orion Pictures executives that the film would be regarded as no more than a sci-fi film, and only last a week in theaters. It was a low-budget film which cost $6.5 million to make, cutting expenses in such ways as recording the audio track in mono. However, The Terminator eventually earned over $78 million worldwide.^[25]

[edit] Rambo: First Blood Part II (1985)

During the early 1980s, Cameron wrote three screenplays simultaneously: The Terminator, Aliens, and the first draft of Rambo: First Blood Part II. While Cameron continued with The Terminator and Aliens, Sylvester Stallone eventually took over the script of Rambo: First Blood Part II, creating a final draft which differed radically from Cameron's initial version.^[26]

[edit] Aliens (1986)

The producing team behind Aliens, James Cameron and Gale Ann Hurd.

Cameron next began the sequel to Alien, the 1979 film by Ridley Scott. Cameron named the sequel Aliens, and again cast Sigourney Weaver in the iconic role of Ellen Ripley. According to Cameron, the crew on Aliens was hostile to him, regarding him as a poor substitute for Ridley Scott. Cameron sought to show them The Terminator but the majority of the crew refused to watch it and remained skeptical of his direction throughout production. Despite this and other off-screen problems (such as clashing with an uncooperative camera man and having to replace one of the lead actors – Michael Biehn of Terminator took James Remar's place as Corporal Hicks), Aliens became a box office success, and received Academy Award nominations for Best Actress in a Leading Role for Weaver, Best Art Direction, Best Film Editing, Best Original Score, Best Sound, and won awards for Best Sound Effects Editing and Best Visual Effects. In addition, the film and its lead actress made the cover of TIME magazine as a result of its numerous and extensive scenes of women in combat - these were almost without precedent and expressed the feminist theme of the film very strongly.

[edit] The Abyss (1989)

Cameron's next project stemmed from an idea that had come up during a high school biology class. The story of oil-rig workers who discover otherworldly underwater creatures became the basis of Cameron's screenplay for The Abyss, which cast Ed Harris, Mary Elizabeth Mastrantonio and Michael Biehn. Initially budgeted at $41 million U.S. (though the production ran considerably over budget), it was considered to be one of the most expensive films of its time, and required cutting-edge effects technology. Because much of the film takes place underwater and the technology wasn't advanced enough to digitally create an underwater environment, Cameron chose to shoot much of the movie "reel-for-real", at depths of up to 40 feet (12 m). For creation of the sets, the containment building of an unfinished nuclear power plant was converted, and two huge tanks were used.^[27] The main tank was filled with 7,500,000 US gallons (28,000,000 L) of water, and the second with 2,500,000 US gallons (9,500,000 L). The cast and crew resided there for much of the shooting.

[edit] Terminator 2: Judgment Day (1991)

After the success of The Terminator, there had always been talks about a sequel to continue the story of Sarah Connor and her struggle against machines from the future. Although Cameron had come up with a core idea for the sequel, and Schwarzenegger expressed interest in continuing the story, there were still problems regarding who had the rights to the story, as well as the logistics of the special effects needed to make the sequel. Finally, in late-1980s, Mario Kassar of Carolco Pictures secured the rights to the sequel, allowing Cameron to greenlight production of the film, now called Terminator 2: Judgment Day.

For the film, Linda Hamilton reprised her iconic role of Sarah Connor.^[28] In addition, Schwarzenegger also returned in his role as The Terminator, but this time as a protector. Unlike the T-800, who is made of a metal endoskeleton, the new villain of the sequel, called the T-1000, was a more advanced Terminator made of liquid metal, and with polymorphic abilities. The T-1000 would also be much less bulky than the T-800. For the role, Cameron cast Robert Patrick, a sharp contrast to Schwarzenegger. Cameron explained, "I wanted someone who was extremely fast and agile. If the T-800 is a human Panzer tank, then the T-1000 is a Porsche."

Cameron had originally wanted to incorporate this advanced-model Terminator into the first film, but the special effects at the time were not advanced enough. The ground-breaking effects used in The Abyss to digitally depict the water tentacle convinced Cameron that his liquid metal villain was now possible.

TriStar Pictures agreed to distribute the film, but under a locked release date only about one year after the start of shooting. The movie, co-written by Cameron and his longtime friend, William Wisher, Jr., had to go from screenplay to finished film in just that amount of time. Like Cameron's previous film, it was one of the most expensive films of its era, with a budget of about $100 million. The biggest challenge of the movie was the special effects used in creating the T-1000. Nevertheless, the film was finished on time, and released to theaters on July 3, 1991.

Terminator 2, or T2, as it was abbreviated, broke box-office records (including the opening weekend record for an R-rated film), earning over $200 million in the United States and Canada, and over $300 million in other territories, and became the highest-grossing film of that year. It won four Academy Awards: Best Makeup, Best Sound, Best Sound Effects Editing, and Best Visual Effects. It was also nominated for Best Cinematography and Best Film Editing, but lost both Awards to JFK.

James Cameron announced a third Terminator film many times during the 1990s, but without coming out with any finished scripts. Kassar and Vajna purchased the rights to the Terminator franchise from a bankruptcy sale of Carolco's assets.^[29] Terminator 3: Rise of the Machines was eventually made and released in July 2003 without Cameron's involvement. Jonathan Mostow directed the film and Schwarzenegger returned as the Terminator.

Cameron reunited with the main cast of Terminator 2 to film T2 3-D: Battle Across Time, an attraction at Universal Studios Florida, Universal Studios Hollywood and Universal Studios Japan. It was released in 1996 and was a mini-sequel to Terminator 2: Judgment Day. The show is in two parts: a prequel segment in which a spokesperson talks about Cyberdyne, and a main feature, in which the performers interact with a 3-D movie.

[edit] True Lies (1994)

Before the release of T2, Schwarzenegger came to Cameron with the idea of remaking the French comedy La Totale! Titled True Lies, with filming beginning after T2's release, the story revolves around a secret-agent spy who leads a double life as a married man, whose wife believes he is a computer salesman. Schwarzenegger was cast as Harry Tasker, a spy charged with stopping a plan by a terrorist to use nuclear weapons against the United States. Jamie Lee Curtis and Eliza Dushku played the character's family, and Tom Arnold the sidekick.

Cameron's Lightstorm Entertainment signed on with Twentieth Century Fox for production of True Lies. Made on a budget of $115 million and released in 1994, the film earned $146 million in North America, and $232 million abroad. The film received an Academy Award nomination for Best Visual Effects.

[edit] Titanic (1997)

Cameron expressed interest in the famous sinking of the ship RMS Titanic. He decided to script and film his next project based on this event. The picture revolved around a fictional romance story between two young lovers from different social classes who meet on board. Before production began, he took dives to the bottom of the Atlantic and shot actual footage of the ship underwater, which he inserted into the final film. Much of the film's dialogue was also written during these dives.

Subsequently, Cameron cast Leonardo DiCaprio, Kate Winslet, Billy Zane, Kathy Bates, Frances Fisher, Gloria Stuart, Bernard Hill, Jonathan Hyde, Victor Garber, Danny Nucci, David Warner, Suzy Amis, and Bill Paxton as the film's principal cast. Cameron's budget for the film reached about $200 million, making it the most expensive movie ever made at the time. Before its release, the film was widely ridiculed for its expense and protracted production schedule.

Released to theaters on December 19, 1997, Titanic grossed less in its first weekend ($28.6 million) than in its second, ($35.4 million), an increase of 23.8%. This is unheard of for a widely released film, which is a testament to the movie's appeal. This was especially noteworthy, considering that the film's running time of more than three hours limited the number of showings each theater could schedule. It held the No. 1 spot on the box-office charts for months, eventually grossing a total of over $600 million in the United States and Canada and more than $1.8 billion worldwide. Titanic became the highest-grossing film ever made, until Cameron's 2009 film Avatar. The CG visuals surrounding the sinking and destruction of the ship were considered spectacular.^[30] Despite criticism during production of the film, it received a record-tying 14 Oscar nominations (tied with All About Eve) at the 1998 Academy Awards. It won 11 Oscars (also record-tying with Ben-Hur and later The Lord of the Rings: The Return of the King), including Best Picture, Best Film Editing, Best Sound, Best Sound Effects Editing, Best Visual Effects, Best Original Song, Best Original Dramatic Score, and the Best Director award for Cameron.^[31] Upon receiving the award, Cameron exclaimed, "I'm king of the world!", in reference to one of the main characters' lines from the film. In March 2010, Cameron revealed that Titanic will be re-released in 3D in April 2012, and it was re-released on April 4th 2012, in order to coincide with the 100th anniversary of the sinking of the actual ship.^[32]

[edit] Spider-Man and Dark Angel (2000–2002)

Cameron had initially next planned to do a film of the comic book character Spider-Man, a project developed by Menahem Golan of Cannon Films. Columbia hired David Koepp to adapt Cameron's treatment into a screenplay, and Koepp's first draft is taken often word-for-word from Cameron's story,^[33] though later drafts were heavily rewritten by Koepp himself, Scott Rosenberg, and Alvin Sargent. Columbia preferred to credit David Koepp solely, and none of the scripts before or after his were ever examined by the Writers Guild of America, East to determine proper credit attribution.^{[citation needed]} Cameron and other writers objected, but Columbia and the WGA prevailed. In its release in 2002, Spider-Man had its screenplay credited solely to Koepp.^[34]

Unable to make Spider-Man, Cameron moved to television and created Dark Angel, a superheroine-centered series influenced by cyberpunk, biopunk, contemporary superhero franchises, and third-wave feminism. Co-produced with Charles H. Eglee, Dark Angel starred Jessica Alba as Max Guevara, a genetically enhanced transgenic super-soldier created by a secretive organization. Cameron's work was said to "bring empowered female warriors back to television screens[...] by mixing the sober feminism of his The Terminator and Aliens characters with the sexed-up Girl Power of a Britney Spears concert."^[35] While a success in its first season, low ratings in the second led to its cancellation. Cameron himself directed the series finale, a two-hour episode wrapping up many of the series' loose ends.

Documentaries (2002–2012)[link]

In 1998 James and John David Cameron formed a digital media company, earthship.tv which became Earthship Productions.^[36] The company produced live multimedia documentaries from the depths of the Atlantic and Pacific oceans. With Earthship Productions, John Cameron's recent projects have included undersea documentaries on the Bismarck (Expedition: Bismarck, 2002) and the Titanic (Ghosts of the Abyss (2003, in IMAX 3D) and Tony Robinson's Titanic Adventure (2005)).^[37] He was a producer on the 2002 film Solaris, and narrated The Exodus Decoded.

Cameron is a leading advocate for stereoscopic digital 3-D films. In a 2003 interview about his IMAX 2D documentary Ghosts of the Abyss, he mentioned that he is "going to do everything in 3D now".^[38] He has made similar statements in other interviews. Ghosts of the Abyss and Aliens of the Deep (also an IMAX documentary) were both shot in 3-D and released by Walt Disney Pictures and Walden Media, and Cameron did the same for his new project, Avatar for 20th Century Fox & Sony Pictures' Columbia Pictures. He intends to use the same technology for The Dive, Sanctum and an adaptation of the manga series Battle Angel Alita.

Cameron was the founder and CEO of Digital Domain, a visual effects production and technology company.

In addition, he plans to create a 3-D project about the first trip to Mars. ("I've been very interested in the Humans to Mars movement—the 'Mars Underground'—and I've done a tremendous amount of personal research for a novel, a miniseries, and a 3-D film.")^[39] He is on the science team for the 2011 Mars Science Laboratory.^[40]

Cameron announced on February 26, 2007, that he, along with his director, Simcha Jacobovici, have documented the unearthing of the Talpiot Tomb, which is alleged to be the tomb of Jesus. Unearthed in 1981 by Israeli construction workers, the names on the tomb are claimed, in the documentary, to correlate with the names of Jesus and several individuals closely associated with him. Scientists pictured in the feature further claim to have DNA tests, archaeological evidence, and Biblical studies to back up their claim. The documentary, named The Lost Tomb of Jesus, was broadcast on the Discovery Channel on March 4, 2007.

As a National Geographic explorer-in-residence,^[41] Cameron re-investigated the sinking of the Titanic with eight experts in 2012. The investigation was featured in the TV documentary special Titanic: The Final Word with James Cameron, which premiered on April 8 on the National Geographic Channel.^[42] In the conclusion of the analysis, the consensus revised the CGI animation of the sinking conceived in 1995.^[43][44]

[edit] Avatar (2009)

Cameron promoting Avatar during the 2009 San Diego Comic-Con

In June 2005, Cameron was announced to be working on a project tentatively titled "Project 880" (now known to be Avatar) in parallel with another project, Battle Angel (an adaptation of the manga series Battle Angel Alita).^[45] Both movies were to be shot in 3D. By December, Cameron stated that he wanted to film Battle Angel first, followed by Avatar. However in February 2006, he switched goals for the two film projects and decided to film Avatar first. He mentioned that if both films are successful, he would be interested in seeing a trilogy being made for both.^[46]

Avatar had an estimated budget of over $300 million and was released on December 18, 2009.^[47] This marked his first feature film since 1997's Titanic. It is composed almost entirely of computer-generated animation, using a more advanced version of the "performance capture" technique used by director Robert Zemeckis in The Polar Express.^[48] James Cameron wrote an 80 page scriptment for Avatar in 1995^[49] and announced in 1996 that he would make the film after completing Titanic. In December 2006, Cameron explained that the delay in producing the film since the 1990s had been to wait until the technology necessary to create his project was advanced enough.^[50] The film was originally scheduled to be released in May 2009 but was pushed back to December 2009 to allow more time for post production on the complex CGI and to give more time for theatres worldwide to install 3D projectors.^[51] Cameron originally intended Avatar to be 3D-only.^[52] The film went on to break the record for highest-grossing film ever, beating Cameron's previous film Titanic.^[53] Avatar also became the first movie to ever earn more than $2 billion worldwide. It was nominated for nine Academy Awards, including Best Picture and Best Director,^[54] and won three for Best Cinematography, Best Visual Effects and Best Art Direction. Cameron lost the award for Best Director to his ex-wife, Kathryn Bigelow, who also took Best Picture with her film The Hurt Locker.

Cameron was declared as the highest earner in Hollywood for 2010 earning $257 million for his blockbuster hit, in a survey listing the top 40 earners by Vanity Fair.^[55] Critics of Avatar have said that it continues to perpetrate the "White Messiah" myth.^[56] Film-maker Neil Diamond described it in an interview as "Dances with Pocahontas in Space."^[57]

[edit] Sanctum (2011)

Most recently, James Cameron served as the executive producer of Sanctum, a $30,000,000 (estimated budget) film detailing the expedition of a team of underwater cave divers who find themselves trapped in a cave, their exit blocked and no known way to reach the surface either in person or with radio contact.

Planned films[link]

In October 2010, Cameron signed an agreement with Fox to direct two sequels to Avatar, which are scheduled to be released in December 2014 and December 2015. Another project Cameron has announced is a personal commitment to shoot a film on the atomic bombings of Hiroshima and Nagasaki as told through the story of Tsutomu Yamaguchi, a man who survived both attacks. Cameron met with Yamaguchi just days before he died in 2010.^[58]

Awards[link]

Cameron receiving a star on the Hollywood Walk of Fame in December 2009

Cameron received the Bradbury Award from the Science Fiction and Fantasy Writers of America in 1991—but, being primarily thought of as a genre filmmaker, he did not receive any major mainstream filmmaking awards prior to Titanic. With Titanic, Cameron received Academy Awards for Best Film Editing (shared with Conrad Buff and Richard A. Harris), Best Picture (shared with Jon Landau), and Best Director. He also won a Golden Globe Award for best director for the film.

In recognition of "a distinguished career as a Canadian filmmaker", Carleton University, Ottawa, awarded Cameron the honorary degree of Doctor of Fine Arts on June 13, 1998. Cameron accepted the degree in person and gave the Convocation Address.^{[citation needed]}

He also received an honorary doctorate in October 1998 from Brock University in St. Catharines, Ontario, for his accomplishments in the international film industry.

In 1998, Cameron attended convocation to receive an honorary doctorate of Laws from Ryerson University, Toronto. The university awards its highest honor to those who have made extraordinary contributions in Canada, or internationally.

In 1999, Cameron received the honorary Doctor of Fine Arts degree^[59] from California State University, Fullerton, where he had been a student in the 1970s. He received the degree at the university's annual Commencement exercises that year, where he gave the keynote speech.

In recognition of his contributions to underwater filming and remote vehicle technology, the University of Southampton awarded Cameron the honorary degree of Doctor of the University. Cameron received his degree in person at the graduation ceremony in July 2004.^{[citation needed]}

On June 3, 2008, it was announced that he would be inducted into Canada's Walk of Fame.^[60] On December 18, 2009, the same day Avatar was released worldwide, Cameron received the 2,396th star on the Hollywood Walk of Fame.^[61]

On February 28, 2010 James Cameron was honored with a Visual Effects Society (VES) Lifetime Achievement Award.

With Avatar, Cameron has been nominated for three Academy Awards for Best Picture (shared with Jon Landau), Best Director and Best Film Editing (shared with John Refoua and Stephen E. Rivkin) and received the Golden Globe for Best Picture and Best Director.^[62] Cameron and Avatar lost the Academy Awards for Best Director and Best Picture to Cameron's former wife^[63] Kathryn Bigelow for her film, The Hurt Locker.

On September 24, 2010 James Cameron was named Number 1 in The 2010 Guardian Film Power 100 list.^[64] In a list compiled by the British magazine New Statesman in September 2010, he was listed 30th in the list of "The World's 50 Most Influential Figures 2010".^[65]

Awards[link]

Collaborations[link]

Cameron often casts certain actors more than once in his films. Cameron has consistently worked with Bill Paxton, Michael Biehn, Lance Henriksen, Jenette Goldstein and Arnold Schwarzenegger.

Actor	Xenogenesis (1978)	Piranha II: The Spawning (1981)	The Terminator (1984)	Aliens (1986)	The Abyss (1989)	Terminator 2: Judgment Day (1991)	True Lies (1994)	Titanic (1997)	Expedition: Bismarck (2002)	Ghosts of the Abyss (2003)	Avatar (2009)
William Wisher, Jr.1	Y				Y
Lance Henriksen		Y	Y	Y					Y
Bill Paxton			Y	Y			Y	Y		Y
Linda Hamilton			Y			Y
Michael Biehn			Y	Y	Y	Y2
Earl Boen			Y			Y
Arnold Schwarzenegger			Y			Y	Y
Jenette Goldstein				Y		Y		Y
Sigourney Weaver				Y							Y

¹ Although Wisher Jr. has written some of Cameron's works, he is listed in the above table as an actor.
² His reprised role of Reese was cut from the theatrical release, but restored in the DVD's Special Edition Version.

Recurring themes[link]

Cameron's films have recurring themes and subtexts. These include the conflicts between humanity and technology,^[66] the dangers of corporate greed,^[67] strong female characters,^[68] and a strong romance subplot.^[68] In almost all films, the main characters usually get into dramatic crisis situations with significant threats to their own life or even the threat of an impending apocalypse.

While The Abyss dealt with deep sea exploration (shot on a studio set),^[69] Cameron himself became an expert in the field of deep sea wreckage exploration, exploring the wreckage of Titanic and Bismarck.^[70] Cameron will return to this theme with The Dive, shooting from a minisub.

So important is technology in Cameron's films that he waited years for the technical tools of the craft to advance sufficiently to realize his vision for Avatar, for which he had special 3-D cameras developed.^[71]

Filmography[link]

Cameron has contributed to many projects as either a writer, director, producer, or as a combination of the three.

Cameron's first film was the 1978 science fiction short film Xenogenesis (film), which he directed, wrote and produced. Cameron's films have grossed a total of over $7 billion worldwide.

In addition to works of fiction, Cameron has directed and appeared in several documentaries including Ghosts of the Abyss and Aliens of the Deep. He also contributed to a number of television series including Dark Angel and Entourage. He plans to shoot a small drama film after the Avatar trilogy, just to prove that 3D works even for domestic dramas.^[72] His next movie is called Myth.^[73]

Personal life[link]

Cameron has been married five times: to Sharon Williams (1978–1984), Gale Anne Hurd (1985–1989), director Kathryn Bigelow (1989–1991), and Linda Hamilton (1997–1999, daughter Josephine born in 1993). Cameron dated Hamilton since 1991, but the two didn't marry until 1997. Eight months after the marriage, however, they separated, and within days of Cameron's Oscar victory with Titanic, the couple announced their divorce. As part of the divorce settlement, Cameron was ordered to pay Hamilton $50 million.^[74] Hamilton later revealed that the reason for their divorce was not only Cameron's blind devotion to his work to the exclusion of almost everything else, but also that he had been having an affair with Suzy Amis, an actress he cast in Titanic.^[75]. He married Amis in 2000, and they have one son and two daughters. Cameron lives in Malibu, California with his wife.^{[citation needed]} On February 2 the Associated Press said Cameron would be moving to New Zealand to film Avatar.^[76] Hurd was the producer of Cameron's The Terminator, Aliens, and The Abyss, and the executive producer of Terminator 2: Judgment Day. Hamilton played the role of Sarah Connor in both Terminator films. Amis played the part of Lizzy Calvert, Rose's granddaughter, in Titanic. Both Cameron (Avatar) and Bigelow (The Hurt Locker) were nominated for the Oscar, Golden Globe, and BAFTA Award for Best Director for films released in 2009. Cameron won the Golden Globe, whilst Bigelow won the Oscar and the BAFTA for Best Director, becoming the first woman to win either.^{[citation needed]}