A VGA connector.

Video Graphics Array (VGA) refers specifically to the display hardware first introduced with the IBM PS/2 line of computers in 1987,^[1] but through its widespread adoption has also come to mean either an analog computer display standard, the 15-pin D-subminiature VGA connector or the 640×480 resolution itself. While this resolution was superseded in the personal computer market in the 1990s, it is becoming a popular resolution on mobile devices.^[2]

VGA was the last graphical standard introduced by IBM that the majority of PC clone manufacturers conformed to, making it today (as of 2010^[update]) the lowest common denominator that almost all post-1990 PC graphics hardware can be expected to implement down to the lowest level of hardware registers, obviating the need for any device-specific firmware or driver software (while all VGA compatible hardware has on-board firmware as well, the only standardized API of that firmware was created for 16-bit MS-DOS and can't easily be used by newer 32- or 64-bit operating systems).^{[citation needed]} For example, the Microsoft Windows splash screen, in versions prior to Windows Vista, appears while the machine is still operating in VGA mode, which is the reason that this screen always appears in reduced resolution and color depth. Windows Vista and newer versions can make use of the extended firmware of newer graphics hardware to show their splash screen in a higher resolution than VGA allows.

VGA was officially followed by IBM's Extended Graphics Array (XGA) standard, but it was effectively superseded by numerous slightly different extensions to VGA made by clone manufacturers that came to be known collectively as Super VGA.

Today, VGA can display widescreen resolutions including 1920x1080. However, there can be picture quality degradation when compared to using a DVI or HDMI connection, especially on larger sized LCD/LED monitors or TVs. How discernible this quality difference is depends on the individual's eyesight. Blu-ray playback at 1080p is possible via VGA, if Image Constraint Token (ICT) is not enabled on the blu-ray disc.

Technical details[link]

Hardware[link]

VGA compared to other standard resolutions.

VGA is referred to as an "array" instead of an "adapter" because it was implemented from the start as a single chip (an ASIC), replacing the Motorola 6845 and dozens of discrete logic chips that covered the full-length ISA boards of the MDA, CGA, and EGA. Its single-chip implementation also allowed the VGA to be placed directly on a PC′s motherboard with a minimum of difficulty (it only required video memory, timing crystals and an external RAMDAC), and the first IBM PS/2 models were equipped with VGA on the motherboard. (Contrast this with all of the "family one" IBM PC desktop models—the PC, PC/XT, and PC AT—which required a display adapter installed in a slot in order to connect a monitor.)

The VGA supports both All Points Addressable graphics modes, and alphanumeric text modes. Standard graphics modes are:

• 640×480 in 16 colors
• 640×350 in 16 colors
• 320×200 in 16 colors
• 320×200 in 256 colors (Mode 13h)

The VGA specifications are as follows:

• 256 KB Video RAM (The very first cards could be ordered with 64 KB or 128 KB of RAM at the cost of losing some video modes.)
• 16-color and 256-color modes
• 262,144-value color palette (six bits each for red, green, and blue)
• Selectable 25.175 MHz^[3] or 28.322 MHz master clock
• Maximum of 800 horizontal pixels^[4]
• Maximum of 600 lines^[4]
• Refresh rates at up to 70 Hz^[5]
• Vertical blank interrupt (Not all clone cards support this.)
• Planar mode: up to 16 colors (4-bit planes)
• Packed-pixel mode: 256 colors (Mode 13h)
• Hardware smooth scrolling support
• No hardware sprites
• No Blitter, but supports very fast data transfers via 'VGA latch' registers.
• Some "Raster Ops" support
• Barrel shifter
• Split screen support
• 0.7 V peak-to-peak^[6]
• 75 ohm double-terminated impedance (18.7 mA – 13 mW)

As well as the standard modes, VGA can be configured to emulate many of the modes of its predecessors (EGA, CGA, and MDA). Compatibility is almost full at BIOS level, but even at register level, a very high value of compatibility is reached. VGA is not compatible with the special IBM PCjr or HGC video modes.

Signal[link]

The intended standard value for the horizontal frequency of VGA is exactly double the value used in the NTSC-M video system, as this made it much easier to offer optional TV-out solutions or external VGA-to-TV convertor boxes at the time of VGA's development. The formula for the VGA horizontal frequency is thus (60 ÷ 1001) × 525 kHz = 4500 ÷ 143 kHz ≈ 31.4686 kHz. All other frequencies used by the VGA card are derived from this value by integer multiplication or division. Since the exactness of quartz oscillators is limited, real cards will have slightly higher or lower frequency.

All VGA timings can be varied widely by software that bypasses the VGA firmware interface and talks directly to the VGA hardware, as many MS-DOS based games did. However, only the standard modes, or modes that at least use the exact same horizontal and vertical sync timings as one of the standard modes, can be expected to work with the original late-1980s and early-1990s VGA monitors. The use of other timings may in fact damage such monitors and thus was usually avoided by software publishers. Later "multisync" CRT monitors were usually much more flexible.

For most common VGA mode 640×480 "60 Hz" non-interlaced the horizontal timings are:^[7][8]

(Total horizontal sync time 6.60 µs)

The vertical timings are:

(Total vertical sync time 1.43 ms)

640 × 400 @ 70 Hz is video mode used for booting most x86 personal computers.^[7]

640 × 480 @ 60 Hz is the default MS-Windows graphics mode with 16 colors.^[7]

320 × 200 @ 70 Hz, the most common mode for VGA-era PC games, uses the exact same timings as the 640 x 400 mode, just halving the dot clock and displaying each line of pixels twice.

The actual timings vary slightly. For example, for 640×480 @ 60 FPS, a 25.17 µs active video time with a pixel frequency of 25.174 MHz gives 633 pixels rather than the expected 640.

Standard text modes[link]

The BIOS offers some text modes for a VGA adapter, which have 80×25, 40×25, 80×43 or 80×50 text grid. Each cell may choose from one of 16 available colors for its foreground and eight colors for the background; the eight background colors allowed are the ones without the high-intensity bit set. Each character may also be made to blink; all that are set to blink will blink in unison. The blinking option for the entire screen can be exchanged for the ability to use all 16 colors for background. All of these options are the same as those on the CGA adapter as introduced by IBM.

Like EGA, VGA supports having up to 512  different simultaneous characters on screen, albeit in only 8 foreground colors, by re-dedicating one color bit as the highest bit of the character number. The glyphs on 80×25 mode are normally made of 9×16 pixels. Users may define their own character set by loading a custom font onto the card. As character data is only eight bits wide on VGA, just as on all of its predecessors, there is usually a blank pixel column between any two horizontally adjacent glyphs. However, some characters are normally made nine bits wide by repeating their last column instead of inserting a blank column, especially those defining horizontally connected IBM box drawing characters. This functionality is hard-wired to the character numbers C0_hex to DF_hex, where all horizontally connecting characters are found in Codepage 437 and its most common derivatives. The same column-repeating trick was already used on the older MDA hardware with its 9×14 pixel gylphs, but on VGA it can be turned off when loading a font in which those character numbers do not represent box drawing characters.^[10][11]

Monochrome modes[link]

VGA adapters usually support both monochrome and color modes, though the monochrome mode is almost never used, and support for the full set of MDA text mode attributes (intense, underline) is often missing. Black and white text on nearly all modern VGA adapters is drawn by using gray colored text on a black background in color mode. VGA monochrome monitors intended primarily for text were sold, but most of them will work at least adequately with a VGA adapter in color mode. Occasionally, a faulty connection between a modern monitor and video card will cause the VGA part of the card to detect the monitor as monochrome; this will cause the BIOS and initial boot sequence to appear in greyscale. Usually, once the video card's drivers are loaded (for example, by continuing to boot into the operating system), they will override this detection and the monitor will return to color.

Addressing details[link]

Examples of VGA images in 640×480×16 (top) and 320×200×256 modes (bottom). Dithering is used to mask color limitations.

The video memory of the VGA is mapped to the PC's memory via a window in the range between segments 0xA0000 and 0xBFFFF in the PC's real mode address space (A000:0000 and B000:FFFF in segment:offset notation). Typically, these starting segments are:

• 0xA0000 for EGA/VGA graphics modes (64 KB)
• 0xB0000 for monochrome text mode (32 KB)
• 0xB8000 for color text mode and CGA-compatible graphics modes (32 KB)

Due to the use of different address mappings for different modes, it is possible to have a monochrome adapter (i.e. MDA or Hercules) and a color adapter such as the VGA, EGA, or CGA installed in the same machine. At the beginning of the 1980s, this was typically used to display Lotus 1-2-3 spreadsheets in high-resolution text on a monochrome display and associated graphics on a low-resolution CGA display simultaneously. Many programmers also used such a setup with the monochrome card displaying debugging information while a program ran in graphics mode on the other card. Several debuggers, like Borland's Turbo Debugger, D86 (by Alan J. Cox) and Microsoft's CodeView could work in a dual monitor setup. Either Turbo Debugger or CodeView could be used to debug Windows. There were also DOS device drivers such as ox.sys, which implemented a serial interface simulation on the monochrome display and, for example, allowed the user to receive crash messages from debugging versions of Windows without using an actual serial terminal. It is also possible to use the "MODE MONO" command at the DOS prompt to redirect the output to the monochrome display. When a monochrome adapter was not present, it was possible to use the 0xB000 – 0xB7FF address space as additional memory for other programs (for example by adding the line "DEVICE=EMM386.EXE I=B000-B7FF" into config.sys, this memory would be made available to programs that can be "loaded high" – loaded into high memory.)

The VGA color palette[link]

VGA 256 default color palette

The VGA color system is backward compatible with the EGA and CGA adapters, and adds another level of configuration on top of that. CGA was able to display 16 fixed colors, and EGA extended this by allowing each of the 16 colors to be chosen from a 64-color palette (these 64 colors are made up of two bits each for red, green and blue: two bits × three channels = six bits = 64 different values). VGA further extends this scheme by increasing the EGA palette from 64 entries to 256. Two more blocks of 64 colors with progressively darker shades were added, along with eight "blank" entries that were set to black.^{[12][dubious – discuss]}

In addition to the extended palette, VGA adds a second level of indirection: Unlike EGA's fixed 64-color palette, each of VGA's 256 palette entries could be assigned an arbitrary color value through the VGA DAC. The EGA BIOS only allowed two bits per channel to represent each entry, while VGA allowed six bits to represent the intensity of each of the three primaries (red, blue and green). This provided 64 different intensity levels for each of red, green and blue, resulting in 262,144 possible colors, any 256 of which could be assigned to the palette (and in turn out of those 256, any 16 of them could be displayed in CGA video modes).

This method allowed new VGA colors to be used in EGA and CGA graphics modes, providing one remembered how the different palette systems are laid together. To set the text color to very dark red in text mode, for instance, it will need to be set to one of the CGA colors (for example, the default color, #7: light grey.) This color then maps to one in the EGA palette—in the case of CGA color 7, it maps to EGA palette entry 42. The VGA DAC must then be configured to change color 42 to dark red, and then immediately anything displayed on the screen in light-grey (CGA color 7) will become dark red. This feature was often used in 256-color VGA DOS games when they first loaded, by smoothly fading out the text screen to black. (The game Descent, from 1995, is an example.)

While CGA and EGA-compatible modes only allowed 16 colors to be displayed at any one time, other VGA modes, such as the widely used mode 13h, allowed all 256 palette entries to be displayed on the screen at the same time, and so in these modes any 256 colors could be shown out of the 262,144 colors available.

Programming tricks[link]

An undocumented but popular technique nicknamed Mode X (first coined by Michael Abrash) or "tweaked VGA" was used to make programming techniques and graphics resolutions available that were not otherwise possible in the standard Mode 13h. This was done by "unchaining" the 256 KB VGA memory into four separate "planes", which would make all of VGA's 256 KB of RAM available in 256-color modes. There was a trade-off for extra complexity and performance loss in some types of graphics operations, but this was mitigated by other operations becoming faster in certain situations:

• Single-color polygon filling could be accelerated due to the ability to set four pixels with a single write to the hardware.
• The video adapter could assist in copying video RAM regions, which was sometimes faster than doing this with the relatively slow CPU-to-VGA interface.
• Several higher-resolution display modes were possible: at 16 colors, 704×528, 736×552, 768×576, and even 800×600. Software such as Xlib (a VGA graphics library for C in the early 1990s) and ColoRIX (a 256-color graphics program), also supported tweaked 256-color modes using many combinations of widths of 256, 320, and 360 pixels, and heights of 200, 240, 256, 400, and 480 lines (the upper limit being 640×400 which used 250 KB of VGA's 256 KB video ram). However, 320×240 was the best known and most-frequently used since it was a typical 4:3 aspect ratio resolution with square pixels.
• The use of multiple video pages in hardware allowed the programmer to perform double buffering, triple buffering or split screens, which, while available in VGA's 320×200 16-color mode, was not possible using stock Mode 13h.

Sometimes the monitor refresh rate had to be reduced to accommodate these modes, increasing eye strain. They were also incompatible with some older monitors, producing display problems such as picture detail disappearing into overscan, flickering, vertical roll, and lack of horizontal sync depending on the mode being attempted. Because of this, most VGA tweaks used in commercial products were limited to "monitor-safe" combinations, such as 320×240 (square pixels, three video pages), 320×400 (double resolution, two video pages), and 360×480 (highest resolution compatible with standard VGA monitors, one video page). Currently, the highest known tweaked VGA resolution is 400×600×256 (400×600 pixel × 256 colors). It is used in Fractint, a popular fractal generator.

See also[link]

• Graphic display resolutions
• List of video connectors
• List of monochrome and RGB palettes
• List of 16-bit computer hardware palettes

References[link]

Further reading[link]

Wikimedia Commons has media related to: VGA

• J. D. Neal (1997). "VGA Chipset Reference". Hardware Level VGA and SVGA Video Programming Information Page. http://osdever.net./FreeVGA/vga/vga.htm. 
• Jordan Brown and John Kingman (6 May 1996). CHRP VGA Display Device Binding to IEEE 1275–1994 Standard for Boot (Initialization, Configuration) Firmware. 1.0. http://playground.sun.com./1275/bindings/devices/html/vga-1_0d.html. 
• Hinner. "VGA Interface and video signal documents". Signal Level VGA and SVGA Video Information Page. http://martin.hinner.info/vga/. 
• "IBM VGA Technical Reference Manual". This is the original IBM reference. The document provides good overview of VGA functionality and is fairly complete, including a detailed description of standard BIOS modes and some programming techniques.. http://www.mcamafia.de/pdf/ibm_vgaxga_trm2.pdf. 

External links[link]

• VGA pinout and signals descriptions

v t e Computer display standards Video hardware MDA HGC CGA PGC EGA VGA (640x480) MCGA 8514 XGA (1024×768) Size comparison Display resolutions 160×120 240×160 320×200 320×240 480x320 640x480 1024x600 1280×720 1280×768 1152×864 1280×1024 1400×1050 1920×1080 2048×1152 1600x1200 2048×1536 2560×2048 3840x2160 3200x2400 4096×3072 5120×4096 7680×4320 7680×4800 High Definition 1366×768 (commonly mistaken as 1360x768 or 1366x786) 1600×900 1920×1080 1920×1200