This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (October 2008)

Preserved food.

One of the first large canned food factories, of the Weiss brothers in Csepel-Budapest. A trade card from 1885

How canned food was made, a picture from Albert Seigneurie's Grocery Encyclopedia (1898)

Canning is a method of preserving food in which the food contents are processed and sealed in an airtight container. Canning provides a typical shelf life ranging from one to five years, although under specific circumstances a freeze-dried canned product, such as canned, dried lentils, can last as long as 30 years in an edible state. In 1795 the French military offered a cash price of 12,000 francs for a new method to preserve food. Nicolas Appert suggested canning and the process was first proven in 1806 in test with the French navy and the prize awarded in 1809 or 1810. The packaging prevents microorganisms from entering and proliferating inside.

To prevent the food from being spoiled before and during containment, a number of methods are used: pasteurisation, boiling (and other applications of high temperature over a period of time), refrigeration, freezing, drying, vacuum treatment, antimicrobial agents that are natural to the recipe of the foods being preserved, a sufficient dose of ionizing radiation, submersion in a strong saline solution, acid, base, osmotically extreme (for example very sugary) or other microbially-challenging environments.

Other than sterilization, no method is perfectly dependable as a preservative. For example, the microorganism Clostridium botulinum (which causes botulism), can only be eliminated at temperatures above the boiling point.

From a public safety point of view, foods with low acidity (a pH more than 4.6) need sterilization under high temperature (116-130 °C). To achieve temperatures above the boiling point requires the use of a pressure canner. Foods that must be pressure canned include most vegetables, meat, seafood, poultry, and dairy products. The only foods that may be safely canned in an ordinary boiling water bath are highly acidic ones with a pH below 4.6,^[1] such as fruits, pickled vegetables, or other foods to which acidic additives have been added.

History and development of canning[link]

During the first years of the Napoleonic Wars, the French government offered a hefty cash award of 12,000 francs to any inventor who could devise a cheap and effective method of preserving large amounts of food. The larger armies of the period required increased and regular supplies of quality food. Limited food availability was among the factors limiting military campaigns to the summer and autumn months. In 1809, a French confectioner and brewer, Nicolas Appert, observed that food cooked inside a jar did not spoil unless the seals leaked, and developed a method of sealing food in glass jars.^[2] The reason for lack of spoilage was unknown at the time, since it would be another 50 years before Louis Pasteur demonstrated the role of microbes in food spoilage. However, glass containers presented challenges for transportation.

Appert canning jar

Nicolas Appert, developer of the canning process.

Glass jars were largely replaced in commercial canneries with cylindrical tin or wrought-iron canisters (later shortened to "cans") following the work of Peter Durand (1810). Cans are cheaper and quicker to make, and much less fragile than glass jars. Glass jars have remained popular for some high-value products and in home canning. Can openers were not invented for another thirty years — at first, soldiers had to cut the cans open with bayonets or smash them open with rocks. The French Army began experimenting with issuing canned foods to its soldiers, but the slow process of canning foods and the even slower development and transport stages prevented the army from shipping large amounts across the French Empire, and the war ended before the process was perfected. Unfortunately for Appert, the factory which he had built with his prize money was razed in 1814 by Allied soldiers invading France.

1914 magazine advertisement for cookware with instructions for home canning.

Following the end of the Napoleonic Wars, the canning process was gradually employed in other European countries and in the US.

The United Kingdom[link]

Based on Appert's methods of food preservation, Peter Durand patented a process in the United Kingdom in 1810. He did not develop the process, selling his patent in 1811 to Bryan Donkin and John Hall, who were in business as Donkin Hall and Gamble, of Bermondsey.^[3] Bryan Donkin developed the process of packaging food in sealed airtight cans, made of tinned wrought iron. Initially, the canning process was slow and labour-intensive, as each large can had to be hand-made, and took up to six hours to cook, making canned food too expensive for ordinary people. The main market for the food at this stage was the British Army and Royal Navy. By 1817 Donkin recorded that he had sold £3000 worth of canned meat in six months. In 1824 Sir William Edward Parry took canned beef and pea soup with him on his voyage to the Arctic in HMS Fury, during his search for a northwestern passage to India. In 1829, Admiral Sir James Ross also took canned food to the Arctic, as did Sir John Franklin in 1845.^[4] Some of his stores were found by the search expedition led by Captain (later Admiral Sir) Leopold McLintock in 1857. One of these cans was opened in 1939, and was edible and nutritious, though it was not analysed for contamination by the lead solder used in its manufacture.

Throughout the mid-19th century, canned food became a status symbol amongst middle-class households in Europe, becoming something of a frivolous novelty. Early methods of manufacture employed poisonous lead solder for sealing the cans, which may have worsened the disastrous outcome of the 1845 Franklin expedition to chart and navigate the Northwest Passage.

Increasing mechanisation of the canning process, coupled with a huge increase in urban populations across Europe, resulted in a rising demand for canned food. A number of inventions and improvements followed, and by the 1860s smaller machine-made steel cans were possible, and the time to cook food in sealed cans had been reduced from around six hours to thirty minutes.

United States of America[link]

Canned food also began to spread beyond Europe — Robert Ayars established the first American canning factory in New York City in 1812, using improved tin-plated wrought-iron cans for preserving oysters, meats, fruits and vegetables. Demand for canned food greatly increased during wars. Large-scale wars in the nineteenth century, such as the Crimean War, American Civil War, and Franco-Prussian War introduced increasing numbers of working-class men to canned food, and allowed canning companies to expand their businesses to meet military demands for non-perishable food, allowing companies to manufacture in bulk and sell to wider civilian markets after wars ended. Urban populations in Victorian Britain demanded ever-increasing quantities of cheap, varied, quality food that they could keep at home without having to go shopping daily. In response, companies such as Nestlé, Heinz, and others emerged to provide quality canned food for sale to working class city-dwellers. In particular, Crosse and Blackwell took over the concern of Donkin Hall and Gamble. The late 19th century saw the range of canned food available to urban populations greatly increase, as canners competed with each other using novel foodstuffs, highly decorated printed labels, and lower prices.

World War I[link]

Demand for canned food skyrocketed during World War I, as military commanders sought vast quantities of cheap, high-calorie food to feed their millions of soldiers, which could be transported safely, survive trench conditions, and not spoil in transport. Throughout the war, soldiers generally subsisted on low-quality canned foodstuffs, such as the British "Bully Beef" (cheap corned beef), pork and beans and Maconochies Irish Stew, but by 1916 widespread boredom with cheap canned food amongst soldiers resulted in militaries purchasing better-quality food to improve morale, and the complete meals in a can began to appear. In 1917 the French Army began issuing canned French cuisine, such as coq au vin, while the Italian Army experimented with canned ravioli and spaghetti bolognese. Shortages of canned food in the British Army in 1917 led to the government issuing cigarettes and amphetamines to soldiers to suppress their appetites. After the war, companies that had supplied military canned food improved the quality of their goods for civilian sale.

Today, tin-coated steel is the material most commonly used. Laminate vacuum pouches are also used for canning, such as used in MREs and Capri Sun drinks.

Double seams[link]

Women working in a cannery

Invented in 1888 by Max Ams,^[5] modern double seams provide an airtight seal to the tin can. This airtight nature is crucial to keeping bacteria out of the can and keeping its contents sealed inside. Thus, double seamed cans are also known as Sanitary Cans. Developed in 1900 in Europe, this sort of can was made of the traditional cylindrical body made with tin plate. The two ends (lids) were attached using what is now called a double seam. A can thus sealed is impervious to contamination by creating two tight continuous folds between the can’s cylindrical body and the lids. This eliminated the need for solder and allowed improvements in manufacturing speed, reducing cost.

Double seaming uses rollers to shape the can, lid and the final double seam. To make a sanitary can and lid suitable for double seaming, manufacture begins with a sheet of coated tin plate. To create the can body, rectangles are cut and curled around a die, and welded together creating a cylinder with a side seam.

Rollers are then used to flare out one or both ends of the cylinder to create a quarter circle flange around the circumference. Precision is required to ensure that the welded sides are perfectly aligned, as any misalignment will cause inconsistent flange shape, compromising its integrity.

A circle is then cut from the sheet using a die cutter. The circle is shaped in a stamping press to create a downward countersink to fit snugly in to the can body. The result can be compared to an upside down and very flat top hat. The outer edge is then curled down and around about 140 degrees using rollers to create the end curl.

The result is a steel tube with a flanged edge, and a countersunk steel disc with a curled edge. A rubber compound is put inside the curl.

Seaming[link]

Opened can

The body and end are brought together in a seamer and held in place by the base plate and chuck, respectively. The base plate provides a sure footing for the can body during the seaming operation and the chuck fits snugly in to the end (lid). The result is the countersink of the end sits inside the top of the can body just below the flange. The end curl protrudes slightly beyond the flange.

First operation[link]

Once brought together in the seamer, the seaming head presses a first operation roller against the end curl. The end curl is pressed against the flange curling it in toward the body and under the flange. The flange is also bent downward, and the end and body are now loosely joined together. The first operation roller is then retracted. At this point five thicknesses of steel exist in the seam. From the outside in they are:

• End
• Flange
• End Curl
• Body
• Countersink

Second operation[link]

The seaming head then engages the second operation roller against the partly formed seam. The second operation presses all five steel components together tightly to form the final seal. The five layers in the final seam are then called; a) End, b) Body Hook, c) Cover Hook, d) Body, e) Countersink. All sanitary cans require a filling medium within the seam because otherwise the metal-to-metal contact will not maintain a hermetic seal. In most cases, a rubberized compound is placed inside the end curl radius, forming the critical seal between the end and the body.

Probably the most important innovation since the introduction of double seams is the welded side seam. Prior to the welded side seam, the can body was folded and/or soldered together, leaving a relatively thick side seam. The thick side seam required that the side seam end juncture at the end curl to have more metal to curl around before closing in behind the Body Hook or flange, with a greater opportunity for error.

Seamer setup and quality assurance[link]

Many different parts during the seaming process are critical in ensuring that a can is airtight and vacuum sealed. The dangers of a can that is not hermetically sealed are contamination by foreign objects (bacteria or fungicide sprays), or that the can could leak or spoil.

One important part is the seamer setup. This process is usually performed by an experienced technician. Amongst the parts that need setup are seamer rolls and chucks which have to be set in their exact position (using a feeler gauge or a clearance gauge). The lifter pressure and position, roll and chuck designs, tooling wear, and bearing wear all contribute to a good double seam.

Incorrect setups can be non-intuitive. For example, due to the springback effect, a seam can appear loose, when in reality it was closed too tight and has opened up like a spring. For this reason, experienced operators and good seamer setup are critical to ensure that double seams are properly closed.

Quality control usually involves taking full cans from the line - one per seamer head, at least once or twice per shift, and performing a teardown operation (wrinkle/tightness), mechanical tests (external thickness, seamer length/height and countersink) as well as cutting the seam open with a twin blade saw and measuring with a double seam inspection system. The combination of these measurements will determine the seam's quality.

Use of a Statistical Process Control (SPC) software in conjunction with a manual double-seam monitor, computerized double seam scanner, or even a fully automatic double seam inspection system makes the laborious process of double seam inspection faster and much more accurate. Statistically tracking the performance of each head or seaming station of the can seamer allows for better prediction of can seamer issues, and may be used to plan maintenance when convenient, rather than to simply react after bad or unsafe cans have been produced.^[6]

Nutrition value[link]

Canning is a way of processing food to extend its shelf life. The idea is to make food available and edible long after the processing time. A 1997 study found that canned fruits and vegetables provide as much dietary fiber and vitamins as the same corresponding fresh or frozen foods, and in some cases, even more.^[7] The heating process during canning appears to make dietary fiber more soluble, and therefore more readily fermented in the colon into gases and physiologically active byproducts. Canned tomatoes have a higher available lycopene content. Consequently, canned meat and vegetables are often among the list of food items that are stocked during emergencies.^[8]

Potential hazards[link]

To improve food safety for those who eat canned food, governments have enacted laws requiring alphanumeric codes being put on food cans during manufacture indicating information relevant to health, such as the date of canning, etc.

Migration of can components[link]

In canning toxicology, migration is the movement of substances from the can itself into the contents.^[9] Potential toxic substances that can migrate are lead, causing lead poisoning, or bisphenol A, a potential endocrine disruptor that is an ingredient in the epoxy commonly used to coat the inner surface of cans.

Salt content[link]

Canned food can be a major source of dietary salt (sodium chloride).^[10] Too much salt increases the risk of health problems, including high blood pressure. Therefore, health authorities have recommended limitations of dietary sodium.^{[11][12][13][14][15]} Many canned products are available in low-salt and no-salt alternatives.

Botulism[link]

Foodborne botulism results from contaminated foodstuffs in which C. botulinum spores have been allowed to germinate and produce botulism toxin,^[16] and this typically occurs in canned non-acidic food substances. C. botulinum prefers low oxygen environments, and can therefore grow in canned foods.^[16] Botulism is a rare but serious paralytic illness, leading to paralysis that typically starts with the muscles of the face and then spreads towards the limbs.^[17] In severe forms, it leads to paralysis of the breathing muscles and causes respiratory failure. In view of this life-threatening complication, all suspected cases of botulism are treated as medical emergencies, and public health officials are usually involved to prevent further cases from the same source.^[17]

Canning and economic recession[link]

Canned goods and canning supplies sell particularly well in times of recession due to the tendency of financially stressed individuals to engage in cocooning, a term used by retail analysts to describe the phenomenon in which people actively avoid straying from their houses.

In February 2009, the recession-laden United States saw an 11.5% rise in sales of canning-related items.^[18]

Famous canned foods[link]

• Baked beans
• Canned sardines
• Canned tuna
• Pineapple
• Spam
• Tomato soup
• Vienna sausage

See also[link]

• Amanda Jones, an US female author and inventor most noted for inventing a vacuum method of canning called the Jones Process.
• Canned fish
• Canned water
• Canstruction (nonprofit organization)
• Food industry
• Food preservation
• Home canning
• Pasteurization
• Salmon cannery

References[link]

General

• FDA 21CFR113.3 Thermally processed low acid foods packaged in hermetically sealed containers Revision Apr.2006
• N.N. Potter, J.H. Hotchkiss. Food Science. 5th ed. Springer, 1999
• P.J. Fellows. Food Processing Technology: Principles and Practice, 2nd Edition . Woodhead Pub. 1999

Specific

External links[link]

Wikimedia Commons has media related to: Canned food

• National Center for Home Food Preservation
• USDA Complete Guide to Home Canning
• Online directory devoted to the canned food world only
• Tips on getting the most value from your canning dollar

Brendan Canning
Performing with Broken Social Scene at the Olympic Island Festival in 2006.
Background information
Born	1969 (age 42–43)
Origin	Toronto, Ontario, Canada
Genres	Indie rock, shoegazing, experimental rock, art rock, post-rock, Baroque pop, alternative rock, dream pop
Instruments	Bass guitar, guitar, vocals, keys
Years active	1992–present
Labels	Arts & Crafts
Associated acts	Broken Social Scene, Len, By Divine Right, Blurtonia, Valley of the Giants, hHead, Cookie Duster
Website	brendancanning.com

Brendan Canning (born 1969) is a founding member of Broken Social Scene and a veteran indie rock performer who has been a member of various notable bands including By Divine Right, Blurtonia, Valley of the Giants, Len, and hHead. In July 2008 he released a solo album called Something for All of Us..., the second release in the "Broken Social Scene Presents" series. The first single from the album is titled "Hit the Wall" and was released on May 5, 2008. It is available for download on the Arts & Crafts website.

In 2009 Brendan Canning took part in an interactive documentary series called City Sonic. The series, which featured 20 Toronto artists, had him talk about his ever-increasing connection to the Drake Hotel.^[1]

Discography[link]

Solo[link]

• Something for All of Us (2008)

hHead[link]

• Fireman (1992)
• Jerk (1994)
• Ozzy (1996)

By Divine Right[link]

• Bless This Mess (1999)

Broken Social Scene[link]

• Feel Good Lost (2001)
• You Forgot It In People (2002)
• Bee Hives (2003)
• Broken Social Scene (2005)
• Forgiveness Rock Record (2010)

Valley of the Giants[link]

• Valley of the Giants (2004)

References[link]

• Article at www.spin.com

External links[link]

• Official site
• Brendan Canning on Spookey Ruben's Dizzy Playground

This article about a Canadian guitarist is a stub. You can help Wikipedia by expanding it. v t e