Octave illusion

Go to www.djluckydate.com for more tutorials, songs, and refills! Instructions for this video Take the "Yeah Yeah" synth and on the second oscelator change the semi from 4 to 7. Next add a RV-7 Digital Reverb and choose the large hall setting set the dry/wet to 12 Create a Mclass Compressor and set the threshold all the way to the left, the ratio all the way to the right, the attack all the way to the left, and the release all the way to the right. select the "soft knee" button Instructions for "Yeah Yeah" Synth: First create a Thor synthesizer Set the polyphony to 4 And the release polyphony to 1 Now select mono retrig under keyboard modes Select on for the portamento Now click show programmer so we can actually get this synth rolling In the first oscillator leave it as an analog and move the octave to 3 Now turn the little knob below tune and make sure its at OSC 1 PW 64 On Oscillator 2 add another Analog Oscillator, the octave should be set at 4 and the semi should be set at 4 Set the tune knob to 11 Once again turn the knob under tune and set it to OSC 2 PW 64 Now add a third Analog oscillator. The octave will be 2 This time switch the type of synth from the downhill line to the squiggly one And turn the knob under tune to OSC 3 PW 64 On your low pass Ladder Filter make sure 123 are selected Now lets move over to the filter envelope Set a to 1.9 d to 349 s to -48.2 and R to 705 On the amp envelope set a to 1.2 d to 349 s to 0 and r to 1.09 Now we are going to make the <b>...</b>