Ares I

Artist's impression of Ares I launch
Function	man-rated orbital launch vehicle
Manufacturer	Alliant Techsystems (Stage I) Boeing (Stage II)
Country of origin	United States
Size
Height	94 meters (308 ft)
Diameter	5.5 meters (18 ft)
Mass	TBC
Stages	2
Capacity
Payload to LEO	25,400 kg (56,000 lb)
Launch history
Status	canceled (2011)
Launch sites	Kennedy Space Center, LC-39B
Total launches	1 (prototype)
Maiden flight	Scheduled for 2014 (Augustine Commission estimated 2017)
First Stage
Engines	1 Solid
Thrust	TBC
Burn time	~150 seconds
Fuel	Solid
Second Stage
Engines	1 J-2X
Thrust	1,308 kilonewtons (294,000 lbf)
Burn time	TBC
Fuel	LH2/LOX

Ares I was the crew launch vehicle that was being developed by NASA as part of the Constellation Program.^[1] The name "Ares" refers to the Greek deity Ares, who is identified with the Roman god Mars.^[2] Ares I was originally known as the "Crew Launch Vehicle" (CLV).^[3]

NASA planned to use Ares I to launch Orion, the spacecraft intended for NASA human spaceflight missions after the Space Shuttle was retired in 2011. Ares I was to complement the larger, unmanned Ares V, which was the cargo launch vehicle for Constellation. NASA selected the Ares designs for their anticipated overall safety, reliability and cost-effectiveness.^[4] However, the Constellation program, including Ares I was canceled in October 2010 by the passage of the 2010 NASA authorization bill. Existing Constellation contracts remain in place until Congress passes a new funding bill. In September 2011 NASA detailed the Space Launch System as its new vehicle for human exploration beyond Earth's orbit.^[5]

Development[link]

Advanced Transportation System Studies[link]

In 1995 Lockheed Martin produced an Advanced Transportation System Studies (ATSS) report for the Marshall Space Flight Center. A section of the ATSS report describes several possible vehicles much like the Ares I design, with liquid rocket second stages stacked above segmented solid rocket booster (SRB) first stages.^[6] The variants that were considered included both the J-2S engines and Space Shuttle Main Engines (SSMEs) for the second stage. The variants also assumed use of the Advanced Solid Rocket Motor (ASRM) as a first stage, but the ASRM was cancelled in 1993 due to significant cost overruns.

Exploration Systems Architecture Study[link]

President George W. Bush had announced the Vision for Space Exploration in January 2004, and NASA under Sean O'Keefe had solicited plans for a Crew Exploration Vehicle from multiple bidders, with the plan for having two competing teams. These plans were discarded by incoming administrator Michael Griffin, and on April 29, 2005, NASA chartered the Exploration Systems Architecture Study to accomplish specific goals:^[7]

• determine the "top-level requirements and configurations for crew and cargo launch systems to support the lunar and Mars exploration programs"
• assess the "CEV requirements and plans to enable the CEV to provide crew transport to the ISS"
• "develop a reference lunar exploration architecture concept to support sustained human and robotic lunar exploration operations"
• "identify key technologies required to enable and significantly enhance these reference exploration systems"

A Shuttle-derived launch architecture was selected by NASA for the Ares I. Originally, the vehicle would have used a four-segment solid rocket booster (SRB) for the first stage, and a simplified Space Shuttle Main Engine (SSME) for the second stage. An unmanned version was to use the five-segment booster, but with the second stage using the single SSME.^[8] Shortly after the initial design was approved, additional tests revealed that the Orion spacecraft would be too heavy for the four-segment booster to lift,^[9] and in January 2006 NASA announced they would slightly reduce the size of the Orion spacecraft, add a fifth segment to the solid-rocket first stage, and replace the single SSME with the Apollo-derived J-2X motor.^[10] While the change from a four-segment first stage to a five-segment version would allow NASA to construct virtually identical motors (albeit with some interchangeable segments), the main reason for the change to the five-segment booster was the move to the J-2X.^[11]

Comparison of the basic size and shape of the Saturn V, Space Shuttle, Ares I, and Ares V.

The Exploration Systems Architecture Study concluded that the cost and safety of the Ares was superior to that of either of the Evolved Expendable Launch Vehicle (EELVs).^[7] The cost estimates in the study were based on the assumption that new launch pads would be needed for human-rated EELVs.^[7] The facilities for the current EELVs (LC-37 for Delta IV, LC-41 for Atlas V) are in place and could be modified, but this may not have been the most cost effective solution as LC-37 is a contractor owned and operated (COGO) facility and modifications for the Delta IV H were determined to be similar to those required for Ares I.^[12] The ESAS launch safety estimates for the Ares were based on the Space Shuttle, despite the differences, and included only launches after the post-Challenger Space Shuttle redesign.^[13] The estimate counted each Shuttle launch as two safe launches of the Ares booster. The safety of the Atlas V and Delta IV was estimated from the failure rates of all Delta II, Atlas-Centaur, and Titan launches since 1992, although they are not similar designs.^{[citation needed]}

In May 2009 the previously withheld appendices to the 2006 ESAS study were leaked, revealing a number of apparent flaws in the study, which gave safety exemptions to the selected Ares I design while using a model which penalized the EELV-based designs.^{[14][unreliable source?]}

Role in Constellation program[link]

Exploded view of the Ares I

Ares I was the crew launch component of the Constellation program. Originally named the "Crew Launch Vehicle" or CLV, the Ares name was chosen from the Greek deity Ares.^[3] Unlike the Space Shuttle, where both crew and cargo were launched simultaneously on the same rocket, the plans for Project Constellation outlined having two separate launch vehicles, the Ares I and the Ares V, for crew and cargo, respectively. Having two separate launch vehicles allows for more specialized designs for the crew and heavy cargo launch rockets.^[15]

The Ares I rocket was specifically being designed to launch the Orion Multi-Purpose Crew Vehicle. Orion was intended as a crew capsule, similar in design to the Apollo program capsule, to transport astronauts to the International Space Station, the Moon, and eventually Mars. Ares I might have also delivered some (limited) resources to orbit, including supplies for the International Space Station or subsequent delivery to the planned lunar base.^[4]

Contractor selection[link]

NASA selected Alliant Techsystems, the builder of the Space Shuttle Solid Rocket Boosters, as the prime contractor for the Ares I first stage.^[16][17] NASA announced that Rocketdyne would be the main subcontractor for the J-2X rocket engine on July 16, 2007.^[18] NASA selected Boeing to provide and install the avionics for the Ares I rocket on December 12, 2007.^[19]

On August 28, 2007 NASA awarded the Ares I Upper Stage manufacturing contract to Boeing. Boeing built the S-IC stage of the Saturn V rocket at Michoud Assembly Facility in the 1960s. The upper stage of Ares I was to have been built at the NASA Michoud Assembly Facility, the construction site used for the Space Shuttle's External Tank and the Saturn V's S-IC first stage.^[20][21]

J-2X engines[link]

At approximately US$20–25 million per engine, the Rocketdyne-designed and produced J-2X would have cost less than half as much as the more complex Space Shuttle Main Engine (around $55 million).^[22] Unlike the Space Shuttle Main Engine, which was designed to start on the ground, the J-2X was designed from inception to be started in both mid-air and in near-vacuum. This air-start capability was critical, especially in the original J-2 engine used on the Saturn V's S-IVB stage, to propel the Apollo spacecraft to the Moon. The Space Shuttle Main Engine, on the other hand, would have required extensive modifications to add an air-start capability and have been able to restart in a near-vacuum. Near-vacuum restart capability was needed for the Ares I because it was intended to fly an Earth orbit rendezvous, and because the Orion spacecraft has limited fuel reserves. Due to these design issues, a modified Space Shuttle Main Engine would have to be "pre-fired" in a manner similar to the "Main Engine tests" conducted on the Space Shuttle Main Engines prior to the maiden flights of each NASA orbiter, including the STS-26 return to flight in 1988.^[11]

System requirements review[link]

On January 4, 2007, NASA announced that the Ares I had completed its system requirements review, the first such review completed for any manned spacecraft design since the Space Shuttle.^[23] This review was the first major milestone in the design process, and was intended to ensure that the Ares I launch system met all the requirements necessary for the Constellation Program. In addition to the release of the review, NASA also announced that a redesign in the tank hardware was made. Instead of separate LH₂ and LO₂ tanks, separated by an "intertank" like that of the Space Shuttle External Tank, the new LH₂ and LOX tanks would have been separated by a common bulkhead like that employed on the Saturn V S-II and S-IVB stages. This would have provided a significant mass saving and eliminated the need to design a second stage interstage unit that would have had to carry the weight of the Orion spacecraft with it.^[17]

Analysis and testing[link]

Ares I-X launches from Kennedy Space Center launch pad 39B, 15:30 UTC, October 28, 2009.

In January 2008, NASA Watch revealed that the first stage solid rocket of the Ares I could have created high vibrations during the first few minutes of ascent. The vibrations would have been caused by thrust oscillations inside the first stage.^[24] NASA officials had identified the potential problem at the Ares I system design review in late October 2007, stating in a press release that it wanted to solve it by March 2008.^[25] NASA admitted that this problem was very severe, rating it four out of five on a risk scale, but the agency was very confident in solving it.^[24] The mitigation approach developed by the Ares engineering team included active and passive vibration damping, adding an active tuned-mass absorber and a passive "compliance structure" – essentially a spring-loaded ring that would have detuned the Ares I stack.^[26] NASA also pointed out that, since this would have been a new launch system, like the Apollo or Space Shuttle systems, it was normal for such problems to arise during the development stage.^[27] According to NASA, analysis of the data and telemetry from the Ares I-X flight showed that vibrations from thrust oscillation were within the normal range for a Space Shuttle flight.^[28]

A study released in July 2009 by the 45th Space Wing of the US Air Force concluded that an abort 30–60 seconds after launch would have a ~100% chance of killing all crew, due to the capsule being engulfed until ground impact by a cloud of 4,000 °F (2,200 °C) solid propellant fragments, which would melt the capsule's nylon parachute material. NASA's study showed the crew capsule would have flown beyond the more severe danger.^[29][30]

The Ares I igniter was an advanced version of the flight-proven igniter used on the Space Shuttle's solid rocket boosters. It was approximately 18 inches (46 cm) in diameter and 36 inches (91 cm) long, and took advantage of upgraded insulation materials that had improved thermal properties to protect the igniter's case from the burning solid propellant.^[31] NASA successfully completed test firing of the igniter for the Ares I engines on March 10, 2009 at ATK Launch Systems test facilities near Promontory, Utah. The igniter test generated a flame 200 feet (60 meters) in length, and preliminary data showed the igniter performed as planned.^[31]

Development of the Ares I propulsion elements continues to make strong progress. On September 10, 2009, the first Ares I development motor (DM-1) was successfully tested in a full-scale, full-duration test firing.^[32] This test was followed by two more development motor tests, DM-2 on August 31, 2010 and DM-3 on September 8, 2011. For DM-2 the motor was cooled to a core temperature of 40 degrees Fahrenheit (4 degrees Celsius), and for DM-3 it was heated to above 90 degrees Fahrenheit (32 degrees Celsius). In addition to other objectives, these two tests validated Ares motor performance at extreme temperatures.^[33][34] NASA conducted a successful 500-second test firing of the J-2X rocket engine at John C. Stennis Space Center in November 2011.^[35]

The Ares I prototype, Ares I-X, successfully completed a test launch on October 28, 2009.^[36][37][38] Launch Pad 39B was damaged more than with a Space Shuttle launch. During descent, one of the three parachutes of the Ares I-X’s first stage failed to open, and another opened only partially, causing the booster to splash down harder and suffer structural damage.^[39] The launch accomplished all primary test objectives.^[39][40]

Schedule and cost[link]

A concept image of an Ares I launching from Kennedy Space Center launchpad 39B.

NASA completed the Ares I system requirements review in January 2007.^[23] Project design was to have continued through the end of 2009, with development and qualification testing running concurrently through 2012. As of July 2009^[update], flight articles were to have begun production towards the end of 2009 for a first launch in June 2011.^[41] Since 2006 the first launch of a human was planned for no later than 2014,^[42] which is four years after the planned retirement of the Space Shuttle.

Delays in the Ares I development schedule due to budgetary pressures and unforeseen engineering and technical difficulties would have increased the gap between the end of the Space Shuttle program and the first operational flight of Ares I.^[43] Because the Constellation program was never allocated the funding originally projected,^[44] the total estimated cost to develop the Ares I through 2015 rose from $28 billion in 2006 to more than $40 billion in 2009.^[45] The Ares I-X project cost was $445 million.^[46]

Originally scheduled for first test flights in 2011, the independent analysis by the Augustine Commission found in late 2009 that due to technical and financial problems Ares I was not likely to have had its first crewed launch until 2017–2019 under the current budget, or late 2016 with an unconstrained budget.^[47] The Augustine Commission also stated that Ares I and Orion would have an estimated recurring cost of almost $1 billion per flight.^[48] However, later financial analysis in march 2010 showed that the Ares I would have cost $1 billion or more to operate per flight had the Ares I flown just once a year. If the Ares I system were flown multiple times a year the marginal costs could have fallen to as low as $138 million per launch.^[49] In December 2011, NASA administrator Charlie Bolden testified to congress that the Ares I would cost $4-4.5 billion a year, and $1.6 billion per flight.^[50] The Ares I marginal cost was predicted to have been a fraction of the Shuttle's marginal costs even had it flown multiple times per year. By comparison, the cost of launching three astronauts on a manned Russian Soyuz is $153 million.^[51]

On February 8, 2011 it was reported that Alliant Techsystems and Astrium proposed to use Ares I's first stage with the second stage from the Ariane 5 to form a new rocket named Liberty.^[52]

Cancellation[link]

On February 1, 2010, President Barack Obama announced a proposal to cancel the Constellation program effective with the U.S. 2011 fiscal year budget,^[53] but later announced changes to the proposal in a major space policy speech at Kennedy Space Center on April 15, 2010. In October 2010, the NASA authorization bill for 2010 was signed into law which canceled Constellation.^[54] But previous legislation keeps Constellation contracts in force until a new funding bill is passed for 2011.^[55][56]

Design[link]

Concept image of the evolution of the Ares I design from pre-ESAS to latest developments.

Ares I had a payload capability in the 25-metric-ton (28-short-ton; 25-long-ton) class and was comparable to vehicles such as the Delta IV and the Atlas V.^[4] The NASA study group that selected what would become the Ares I rated the vehicle as almost twice as safe as an Atlas or Delta IV-derived design.^[57] The rocket was to have made use of an aluminum-lithium alloy which is lower in density but similar in strength compared to other aluminum alloys. The alloy is produced by Alcoa.^[58]

First stage[link]

The first stage was to have been a more powerful and reusable solid fuel rocket derived from the Space Shuttle Solid Rocket Booster (SRB). Compared with the Solid Rocket Booster, which had four segments, the most notable difference was the addition of a fifth segment. This fifth segment would have enabled the Ares I to produce more thrust.^[4][59] Other changes made to the Solid Rocket Booster were to have been the removal of the Space Shuttle External Tank (ET) attachment points and the replacement of the Solid Rocket Booster nosecone with a new forward adapter that would have interfaced with the liquid-fueled second stage. The adapter was to have been equipped with solid-fueled separation motors to facilitate the disconnection of the stages during ascent.^[4] The grain design was also changed, and so were the insulation and liner. By the Ares I first stage ground test, the case, grain design, number of segments, insulation, liner, throat diameter, thermal protection systems and nozzle had all changed.^[60]

Upper stage[link]

The upper stage, derived from the Shuttle's External Tank (ET) and based on the S-IVB stage of the Saturn V, was to be propelled by a single J-2X rocket engine fueled by liquid hydrogen (LH₂) and liquid oxygen (LOX).^[61] The J-2X was derived from the original J-2 engine used during the Apollo program, but with more thrust (~294,000 lbf) and fewer parts than the original engine. On July 16, 2007, NASA awarded Rocketdyne a sole-source contract for the J-2X engines to be used for ground and flight tests.^[62] Rocketdyne was the prime contractor for the original J-2 engines used in the Apollo program.

Although its J-2X engine was derived from an established design, the upper stage itself would have been wholly new. Originally to have been based on both the internal and external structure of the ET, the original design called for separate fuel and oxidizer tanks, joined together by an "intertank" structure, and covered with the spray-on foam insulation to keep venting to a minimum. The only new hardware on the original ET-derived second stage would have been the thrust assembly for the J-2X engine, new fill/drain/vent disconnects for the fuel and oxidizer, and mounting interfaces for the solid-fueled first stage and the Orion spacecraft.

Using a concept going back to the Apollo program, the "intertank" structure was dropped to decrease mass, and in its place, a common bulkhead, similar to that used on both the S-II and S-IVB stages of the Saturn V, would have been used between the tanks. The savings from these changes were used to increase propellant capacity, which was 297,900 pounds (135,100 kg).^[63] The spray-on foam insulation was the only part of the Shuttle's ET that would have been be used on this new Saturn-derived upper stage.

See also[link]

• Ares IV, a proposed heavy-lift variant of Ares I and V combined.
• Boilerplate (spaceflight)
• DIRECT, shuttle-derived launcher proposed as alternative to Ares I and Ares V.
• List of Constellation missions

References[link]

External links[link]

Wikimedia Commons has media related to: Project Constellation

• NASA Ares I page
• GAO-08-51, Ares I Report to Congress, GAO

v t e Constellation program Launch tests Ares I-X Ares I-Y Ares V-Y Later missions List of Constellation missions Orion Asteroid Mission Orion Mars Mission Components Orion Ares I Ares V Earth Departure Stage Altair J-2X RS-68 Shuttle-Derived Launch Vehicle Launch sites Kennedy Space Center LC-39 Abort Orion abort modes Orion Abort Test Booster Launch Abort System (LAS) Max Launch Abort System (MLAS) Related topics Vision for Space Exploration Exploration Systems Architecture Study DIRECT Constellation Space Suit Advanced Technology Large-Aperture Space Telescope (AT-LAST) NASA Authorization Act of 2005 Augustine Commission List of missions

v t e National Aeronautics and Space Administration (NASA) Policy and history NACA (1915) National Aeronautics and Space Act (1958) Paine (1986) Rogers (1986) Ride (1987) Space Exploration Initiative (1989) Augustine (1990) U.S. National Space Policy (1996) CFUSAI (2002) CAIB (2003) Vision for Space Exploration (2004) Aldridge (2004) Augustine (2009) General: Space Race Administrator and Deputy Administrator Chief Scientist Astronaut Corps Budget Spin-off technologies NASA TV Robotic programs Past Hitchhiker Mariner Mariner Mark II MESUR Mars Surveyor '98 New Millennium Lunar Orbiter Pioneer Planetary Observer Ranger Surveyor Viking Project Prometheus Current Living With a Star Lunar Precursor Robotic Program Earth Observing System Great Observatories program Explorer Small explorer Voyager (Sounds of the Cosmos) Discovery New Frontiers Mars Exploration Rover Mars Scout Human spaceflight programs Past X-15 (suborbital) Mercury Gemini Apollo Apollo–Soyuz Test Project (with USSR) Skylab Shuttle–Mir (with Russia) Space Shuttle program Constellation program Current International Space Station program Future/planned Commercial Orbital Transportation Services (COTS) Commercial Crew Development (CCDev) Individual featured missions (human and robotic) Past COBE Apollo 11 Mercury 3 Mercury 6 Magellan Pioneer 10/11 Voyager 1/2 Galileo WMAP WISE Space Shuttle Currently operating MRO Mars Odyssey MESSENGER Dawn New Horizons Kepler International Space Station Hubble Space Telescope Spitzer RHESSI SWIFT GALEX THEMIS Mars Exploration Rover Cassini GOES 14 Lunar Reconnaissance Orbiter GOES 15 SDO Aquarius Juno GRAIL MSL Future NuSTAR NPP James Webb Space Telescope MAVEN WFIRST RBSP Space Comm and Nav (SCaN) Space Network Near Earth Network Deep Space Network (Goldstone Madrid Canberra) NASA categories and lists NASA personnel NASA programs NASA probes NASA images NASA Tweetup NASA List of NASA Astronaut Groups List of astronauts by selection List of NASA aircraft List of NASA missions List of NASA contractors