The Permian through Jurassic stratigraphy of the Colorado Plateau area of southeastern Utah is a great example of Original Horizontality and the Law of Superposition, two important ideas used in relative dating. These strata make up much of the famous prominent rock formations in widely spaced protected areas such as Capitol Reef National Park and Canyonlands National Park. From top to bottom: Rounded tan domes of the Navajo Sandstone, layered red Kayenta Formation, cliff-forming, vertically jointed, red Wingate Sandstone, slope-forming, purplish Chinle Formation, layered, lighter-red Moenkopi Formation, and white, layered Cutler Formation sandstone. Picture from Glen Canyon National Recreation Area, Utah.

Relative dating is the science determining the relative order of past events, without necessarily determining their absolute age.

In geology rock or superficial deposits, fossils and lithologies can be used to correlate one stratigraphic column with another. Prior to the discovery of radiometric dating which provided a means of absolute dating in the early 20th century, archaeologists and geologists were largely limited to the use of relative dating techniques to determine the geological events.

Though relative dating can only determine the sequential order in which a series of events occurred, not when they occur, it remains a useful technique especially in materials lacking radioactive isotopes. Relative dating by biostratigraphy is the preferred method in paleontology, and is in some respects more accurate (Stanley, 167–69). The Law of Superposition was the summary outcome of 'relative dating' as observed in geology from the 17th century to the early 20th century.

The regular order of occurrence of fossils in rock layers was discovered around 1800 by William Smith. While digging the Somerset Coal Canal in southwest England, he found that fossils were always in the same order in the rock layers. As he continued his job as a surveyor, he found the same patterns across England. He also found that certain animals were in only certain layers and that they were in the same layers all across England. Due to that discovery, Smith was able to recognize the order that the rocks were formed. Sixteen years after his discovery, he published a geological map of England showing the rocks of different geologic time eras.

Principles of relative chronology[link]

Methods for relative dating were developed when geology first emerged as a formal science. Geologists still use the following principles today as a means to provide information about geologic history and the timing of geologic events.

Uniformitarianism[link]

The principle of Uniformitarianism states that the geologic processes observed in operation that modify the Earth's crust at present have worked in much the same way over geologic time.^[1] A fundamental principle of geology advanced by the 18th century Scottish physician and geologist James Hutton, is that "the present is the key to the past." In Hutton's words: "the past history of our globe must be explained by what can be seen to be happening now."^[2]

Intrusive relationships[link]

Cross-cutting relations can be used to determine the relative ages of rock strata and other geological structures. Explanations: A - folded rock strata cut by a thrust fault; B - large intrusion (cutting through A); C - erosional angular unconformity (cutting off A & B) on which rock strata were deposited; D - volcanic dyke (cutting through A, B & C); E - even younger rock strata (overlying C & D); F - normal fault (cutting through A, B, C & E).

The principle of intrusive relationships concerns crosscutting intrusions. In geology, when an igneous intrusion cuts across a formation of sedimentary rock, it can be determined that the igneous intrusion is younger than the sedimentary rock. There are a number of different types of intrusions, including stocks, laccoliths, batholiths, sills and dikes.

Cross-cutting relationships[link]

The principle of cross-cutting relationships pertains to the formation of faults and the age of the sequences through which they cut. Faults are younger than the rocks they cut; accordingly, if a fault is found that penetrates some formations but not those on top of it, then the formations that were cut are older than the fault, and the ones that are not cut must be younger than the fault. Finding the key bed in these situations may help determine whether the fault is a normal fault or a thrust fault.^[3]

Inclusions and components[link]

The principle of inclusions and components states that, with sedimentary rocks, if inclusions (or clasts) are found in a formation, then the inclusions must be older than the formation that contains them. For example, in sedimentary rocks, it is common for gravel from an older formation to be ripped up and included in a newer layer. A similar situation with igneous rocks occurs when xenoliths are found. These foreign bodies are picked up as magma or lava flows, and are incorporated, later to cool in the matrix. As a result, xenoliths are older than the rock which contains them.

Horizontality[link]

The principle of original horizontality states that the deposition of sediments occurs as essentially horizontal beds. Observation of modern marine and non-marine sediments in a wide variety of environments supports this generalization (although cross-bedding is inclined, the overall orientation of cross-bedded units is horizontal).^[3]

Superposition[link]

The law of superposition states that a sedimentary rock layer in a tectonically undisturbed sequence is younger than the one beneath it and older than the one above it. Logically a younger layer cannot slip beneath a layer previously deposited. This principle allows sedimentary layers to be viewed as a form of vertical time line, a partial or complete record of the time elapsed from deposition of the lowest layer to deposition of the highest bed.^[3]

Faunal succession[link]

The principle of faunal succession is based on the appearance of fossils in sedimentary rocks. As organisms exist at the same time period throughout the world, their presence or (sometimes) absence may be used to provide a relative age of the formations in which they are found. Based on principles laid out by William Smith almost a hundred years before the publication of Charles Darwin's theory of evolution, the principles of succession were developed independently of evolutionary thought. The principle becomes quite complex, however, given the uncertainties of fossilization, the localization of fossil types due to lateral changes in habitat (facies change in sedimentary strata), and that not all fossils may be found globally at the same time.^[4]

Lateral continuity[link]

Schematic representation of the principle of lateral continuity.

The principle of lateral continuity states that layers of sediment initially extend laterally in all directions; in other words, they are laterally continuous. As a result, rocks that are otherwise similar, but are now separated by a valley or other erosional feature, can be assumed to be originally continuous.

Layers of sediment do not extend indefinitely; rather, the limits can be recognized and are controlled by the amount and type of sediment available and the size and shape of the sedimentary basin. As long as sediment is transported to an area, it will eventually be deposited. However, as the amount of material lessens away from the source, the layer of that material will become thinner.

Often, coarser-grained material can no longer be transported to an area because the transporting medium has insufficient energy to carry it to that location. In its place, the particles that settle from the transporting medium will be finer-grained, and there will be a lateral transition from coarser- to finer-grained material. The lateral variation in sediment within a stratum is known as sedimentary facies.

If sufficient sedimentary material is available, it will be deposited up to the limits of the sedimentary basin. Often, the sedimentary basin is within rocks that are very different from the sediments that are being deposited. In those cases, the lateral limits of the sedimentary layer will be marked by an abrupt change in rock type.

Inclusions of Igneous rocks[link]

Melt inclusions are small parcels or "blobs" of molten rock that are trapped within crystals that grow in the magmas that form igneous rocks. In many respects they are analogous to fluid inclusions. Melt inclusions are generally small - most are less than 100 micrometres across (a micrometre is one thousandth of a millimeter, or about 0.00004 inches). Nevertheless they can provide an abundance of useful information. Using microscopic observations and a range of chemical microanalysis techniques geochemists and igneous petrologists can obtain a range of useful information from melt inclusions. Two of the most common uses of melt inclusions are to study the compositions of magmas present early in the history of specific magma systems. This is because inclusions can act like "fossils" - trapping and preserving these early melts before they are modified by later igneous processes. In addition, because they are trapped at high pressures many melt inclusions also provide important information about the contents of volatile elements (such as H₂O, CO₂, S and Cl) that drive explosive volcanic eruptions.

Sorby (1858) was the first to document microscopic melt inclusions in crystals. The study of melt inclusions has been driven more recently by the development of sophisticated chemical analysis techniques. Scientists from the former Soviet Union lead the study of melt inclusions in the decades after World War II (Sobolev and Kostyuk, 1975), and developed methods for heating melt inclusions under a microscope, so changes could be directly observed.

Although they are small, melt inclusions may contain a number of different constituents, including glass (which represents magma that has been quenched by rapid cooling), small crystals and a separate vapour-rich bubble. They occur in most of the crystals found in igneous rocks and are common in the minerals quartz, feldspar, olivine and pyroxene. The formation of melt inclusions appears to be a normal part of the crystallization of minerals within magmas, and they can be found in both volcanic and plutonic rocks.

Included fragments[link]

The law of included fragments is a method of relative dating in geology. Essentially, this law states that clasts in a rock are older than the rock itself.^[5] One example of this is a xenolith, which is a fragment of country rock that fell into passing magma as a result of stoping. Another example is a derived fossil, which is a fossil that has been eroded from an older bed and redeposited into a younger one.^[6]

This is a restatement of Charles Lyell's original principle of inclusions and components from his 1830 to 1833 multi-volume Principles of Geology, which states that, with sedimentary rocks, if inclusions (or clasts) are found in a formation, then the inclusions must be older than the formation that contains them. For example, in sedimentary rocks, it is common for gravel from an older formation to be ripped up and included in a newer layer. A similar situation with igneous rocks occurs when xenoliths are found. These foreign bodies are picked up as magma or lava flows, and are incorporated, later to cool in the matrix. As a result, xenoliths are older than the rock which contains them.

Archaeology[link]

Relative dating methods in archaeology are similar to some of those applied in geology. The principles of typology can be compared to the biostratigraphic approach described above.

Planetology[link]

Relative dating is used to determine the order of events on objects other than Earth; for decades, planetary scientists have used it to decipher the development of bodies in the Solar System, particularly in the vast majority of cases for which we have no surface samples. Many of the same principles are applied. For example, if a valley is formed inside an impact crater, the valley must be younger than the crater.

Craters themselves are highly useful in relative dating; as a general rule, the younger a planetary surface is, the fewer craters it has. If long-term cratering rates are known to enough precision, crude absolute dates can be applied based on craters alone; however, cratering rates outside the Earth-Moon system are poorly known.(Hartmann, 258)

See also[link]

• Key bed
• Stratigraphy
• Structural geology
• Unconformity

References[link]

• "Biostratigraphy: William Smith". Understanding Evolution. 2009. University of California Museum of Paleontology. 23 January 2009 <http://evolution.berkely.edu/evolibrary/article/0_0_0/history_11>
• Hartmann, William K. Moons & Planets, 4th ed. Belmont: Wadsworth Publishing Company, 1999. ISBN 0-534-54630-7
• Monroe, James S., and Reed Wicander. The Changing Earth: Exploring Geology and Evolution, 2nd ed. Belmont: West Publishing Company, 1997. ISBN 0-314-09577-2
• Stanley, Steven M. Earth System History. New York: W.H. Freeman and Company, 1999. ISBN 0-7167-2882-6

v t e Chronology Main articles Time · Astronomy · Geology · Paleontology · Archaeology · History Eras and epochs Calendar eras Human Era · Ab urbe condita · Anno Domini (Common Era) · Anno Mundi · Byzantine era · Spanish era · Before Present · Hijri · Egyptian · Sothic cycle · Hindu units of measurement · Hindu Yugas Regnal year Canon of Kings · Lists of kings · Limmu · Seleucid era Era names Chinese · Japanese · Korean · Vietnamese Calendars (Pre-)Julian Pre-Julian Roman · Original Julian · Proleptic Julian · Revised Julian Gregorian Gregorian · Proleptic Gregorian · Old Style and New Style dates Astronomical Lunisolar · Solar · Lunar · Astronomical year numbering Others Iranian · Islamic · Chinese sexagenary cycle · ISO week date Astronomic time   Chronology Portal Cosmic Calendar · Ephemeris · Galactic year · Metonic cycle · Milankovitch cycles Geologic time Concepts Deep time · Geological history of Earth · Geological time units Standards Global Standard Stratigraphic Age (GSSA) · Global Boundary Stratotype Section and Point (GSSP) Methods Chronostratigraphy · Geochronology · Isotope geochemistry · Law of superposition · Optical dating · Samarium-neodymium dating Archaeological methods Absolute dating Incremental dating · Archaeomagnetic dating · Dendrochronology · Glottochronology · Ice core · Lichenometry · Paleomagnetism · Radiocarbon dating · Radiometric dating · Tephrochronology · Thermoluminescence dating · Uranium-lead dating Relative dating Seriation · Stratification · Fluorine absorption dating Genetic methods Amino acid dating · Molecular clock Related topics Chronicle · New Chronology · Periodization · Synchronoptic view · Timeline · Year zero · Circa · Floruit · ASPRO chronology