Standard NOAA Rain Gauge Tipping Bucket Rain Gauge Recorder Close up of a Tipping Bucket Rain Gauge Recorder chart

A rain gauge (also known as a udometer or a pluviometer or an ombrometer or a cup) is a type of instrument used by meteorologists and hydrologists to gather and measure the amount of liquid precipitation over a set period of time.

History[link]

The first known rainfall records were kept by the Ancient Greeks, about 500 B.C. This was followed 100 years later by people in India using bowls to record the rainfall. The readings from these were correlated against expected growth, and used as a basis for land taxes. In the Arthashastra, used for example in Magadha, precise standards were set as to grain production. Each of the state storehouses were equipped with a standardised rain gauge to classify land for taxation purposes.^[1]

While some sources state that the much later cheugugi of Korea was the world's first gauge, other sources say that Jang Yeong-sil developed or refined an existing gauge.^{[2][3][4][5][6][7][8]} In 1662, Christopher Wren created the first tipping-bucket rain gauge in Britain.^[6]

George James Symons was elected to the council of the British meteorological society in 1863 and made it his life's work to investigate rainfall within the British Isles. He set up a voluntary network of observers, who collected data which was returned to him for analysis. He also collected old rain fall records going back about a hundred years previously. In 1870 he produced an account of rainfall in the British Isles starting in 1725. Due to the ever increasing numbers of observers and Symons prior inspections of the gauges, standardisation of the gauges was necessary. Symons began experiments on new gauges in his own garden. He experimented with variations in size, shape, and height of the gauge. In 1863 he took on the help of Colonel Michael Foster Ward, of Calne Wiltshire, who undertook more extensive investigations. By including Ward and various others around Britain, the investigations continued until 1890. The experiments were remarkable for their planning, execution, and drawing of conclusions. The results of these experiments lead to the progressive adoption of the well known standard gauge, still used by the UK Meteorological Office today. Namely, one made of ..'copper, with a five inch funnel having its brass rim one foot above the ground...'^[9]

Principles[link]

Most rain gauges generally measure the precipitation in millimeters.The level of rainfall is sometimes reported as inches or centimeters.

Rain gauge amounts are read either manually or by automatic weather station (AWS). The frequency of readings will depend on the requirements of the collection agency. Some countries will supplement the paid weather observer with a network of volunteers to obtain precipitation data (and other types of weather) for sparsely populated areas.

In most cases the precipitation is not retained, however some stations do submit rainfall (and snowfall) for testing, which is done to obtain levels of pollutants.

Rain gauges have their limitations. Attempting to collect rain data in a hurricane can be nearly impossible and unreliable (even if the equipment survives) due to wind extremes. Also, rain gauges only indicate rainfall in a localized area. For virtually any gauge, drops will stick to the sides or funnel of the collecting device, such that amounts are very slightly underestimated, and those of .01 inches or .25 mm may be recorded as a trace.

Another problem encountered is when the temperature is close to or below freezing. Rain may fall on the funnel and ice or snow may collect in the gauge and not permit any subsequent rain to pass through.

Rain gauges should be placed in an open area where there are no obstructions, such as building or trees, to block the rain. This is also to prevent the water collected on the roofs of buildings or the leaves of trees from dripping into the rain gauge after a rain, resulting in inaccurate readings.

Types[link]

Types of rain gauges include graduated cylinders, weighing gauges, tipping bucket gauges, and simple buried pit collectors. Each type has its advantages and disadvantages for collecting rain data.

Standard rain gauge[link]

The standard NOAA rain gauge, developed around the start of the 20th century, consists of a funnel attached to a graduated cylinder (2 cm in diameter) that fits inside a larger outside container (20 cm in diameter and 50 cm tall). If the water overflows the inside graduated cylinder, the outside larger container will catch it. When measurements are taken, the height of the water in the small graduated cylinder is measured and the excess overflow in the large container is carefully poured into another graduated cylinder and measured to give the total rainfall. In locations using the metric system, the cylinder is usually marked in mm and in the picture above will measure up to 250 millimetres (9.8 in) of rainfall. Each horizontal line on the cylinder is 5 centimetres (2.0 in) in areas using the metric system; in areas using Imperial units each horizontal line represents 0.01 inch. The larger container collects any rainfall amounts over 25 mm that flows from a small hole near the top of the cylinder. A metal pipe is attached to the container and can be adjusted to ensure the rain gauge is level. This pipe then fits over a metal rod that has been placed in the ground.^[10]

Weighing precipitation gauge[link]

A weighing-type precipitation gauge consists of a storage bin, which is weighed to record the mass. Certain models measure the mass using a pen on a rotating drum, or by using a vibrating wire attached to a data logger. The advantages of this type of gauge over tipping buckets are that it does not underestimate intense rain, and it can measure other forms of precipitation, including rain, hail and snow. These gauges are, however, more expensive and require more maintenance than tipping bucket gauges.

The weighing-type recording gauge may also contain a device to measure the quantity of chemicals contained in the location's atmosphere. This is extremely helpful for scientists studying the effects of greenhouse gases released into the atmosphere and their effects on the levels of the acid rain. Some Automated Surface Observing System (ASOS) units use an automated weighing gauge called the AWPAG (All Weather Precipitation Accumulation Gauge).

Tipping bucket rain gauge[link]

The interior of a tipping bucket rain gauge

The tipping bucket rain gauge consists of a funnel that collects and channels the precipitation into a small seesaw-like container. After a pre-set amount of precipitation falls, the lever tips, dumping the collected water and sending an electrical signal. An old-style recording device may consist of a pen mounted on an arm attached to a geared wheel that moves once with each signal sent from the collector. In this design, the wheel turns the pen arm moves either up or down leaving a trace on the graph and at the same time making a loud click. Each jump of the arm is sometimes referred to as a 'click' in reference to the noise. The chart is measured in 10 minute periods (vertical lines) and 0.4 mm (0.015 in) (horizontal lines) and rotates once every 24 hours and is powered by a clockwork motor that must be manually wound.

The exterior of a tipping bucket rain gauge

The tipping bucket rain gauge is not as accurate as the standard rain gauge because the rainfall may stop before the lever has tipped. When the next period of rain begins it may take no more than one or two drops to tip the lever. This would then indicate that pre-set amount has fallen when in fact only a fraction of that amount has actually fallen. Tipping buckets also tend to underestimate the amount of rainfall, particularly in snowfall and heavy rainfall events.^[11][12] The advantage of the tipping bucket rain gauge is that the character of the rain (light, medium, or heavy) may be easily obtained. Rainfall character is decided by the total amount of rain that has fallen in a set period (usually 1 hour) and by counting the number of 'clicks' in a 10 minute period the observer can decide the character of the rain. Correction algorithms can be applied to the data as an accepted method of correcting the data for high level rainfall intensity amounts.

Modern tipping rain gauges consist of a plastic collector balanced over a pivot. When it tips, it actuates a switch (such as a reed switch) which is then electronically recorded or transmitted to a remote collection station.

Tipping gauges can also incorporate weighing gauges. In these gauges, a strain gauge is fixed to the collection bucket so that the exact rainfall can be read at any moment. Each time the collector tips, the strain gauge (weight sensor) is re-zeroed to null out any drift.

To measure the water equivalent of frozen precipitation, a tipping bucket may be heated to melt any ice and snow that is caught in its funnel. Without a heating mechanism, the funnel often becomes clogged during a frozen precipitation event, and thus no precipitation can be measured^{[citation needed]}. Many Automated Surface Observing System (ASOS) units use heated tipping buckets to measure precipitation ^[13]

Optical rain gauge[link]

These have a row of collection funnels. In an enclosed space below each is a laser diode and a photo transistor detector. When enough water is collected to make a single drop, it drips from the bottom, falling into the laser beam path. The sensor is set at right angles to the laser so that enough light is scattered to be detected as a sudden flash of light. The flashes from these photo detectors are then read and transmitted or recorded.

Acoustic rain gauge[link]

The acoustic disdrometer developed by Stijn de Jong is an acoustic rain gauge. The big advantage of this design is that it is a lot less costly.^[14]

References[link]

External links[link]

Wikimedia Commons has media related to: Rain gauge

• Report Local Rainfall across the United States here
• Report Local Rainfall Worldwide here
• Record, Analyse, Share your rainfall here