A prototype is an early sample or model built to test a concept or process or to act as a thing to be replicated or learned from. It is a term used in a variety of contexts, including semantics, design, electronics, and software programming. A prototype is designed to test and trial a new design to enhance precision by system analysts and users. Prototyping serves to provide specifications for a real, working system rather than a theoretical one.^[1]

The word prototype derives from the Greek πρωτότυπον (prototypon), "primitive form", neutral of πρωτότυπος (prototypos), "original, primitive", from πρῶτος (protos), "first" and τύπος (typos), "impression".^[2]

Semantics[link]

In semantics, prototypes or proto instances combine the most representative attributes of a category. Prototypes are typical instances of a category that serve as benchmarks against which the surrounding, less representative.

Design and modeling[link]

In many fields, there is great uncertainty as to whether a new design will actually do what is desired. New designs often have unexpected problems. A prototype is often used as part of the product design process to allow engineers and designers the ability to explore design alternatives, test theories and confirm performance prior to starting production of a new product. Engineers use their experience to tailor the prototype according to the specific unknowns still present in the intended design. For example, some prototypes are used to confirm and verify consumer interest in a proposed design whereas other prototypes will attempt to verify the performance or suitability of a specific design approach.

In general, an iterative series of prototypes will be designed, constructed and tested as the final design emerges and is prepared for production. With rare exceptions, multiple iterations of prototypes are used to progressively refine the design. A common strategy is to design, test, evaluate and then modify the design based on analysis of the prototype.

In many products it is common to assign the prototype iterations Greek letters. For example, a first iteration prototype may be called an "Alpha" prototype. Often this iteration is not expected to perform as intended and some amount of failures or issues are anticipated. Subsequent prototyping iterations (Beta, Gamma, etc.) will be expected to resolve issues and perform closer to the final production intent.

In many product development organizations, prototyping specialists are employed - individuals with specialized skills and training in general fabrication techniques that can help bridge between theoretical designs and the fabrication of prototypes.

Basic prototype categories[link]

There is no general agreement on what constitutes a "prototype" and the word is often used interchangeably with the word "model" which can cause confusion. In general, "prototypes" fall into five basic categories:

Proof-of-Principle Prototype (Model) (in electronics sometimes built on a breadboard). A Proof of concept prototype is used to test some aspect of the intended design without attempting to exactly simulate the visual appearance, choice of materials or intended manufacturing process. Such prototypes can be used to "prove" out a potential design approach such as range of motion, mechanics, sensors, architecture, etc. These types of models are often used to identify which design options will not work, or where further development and testing is necessary.

Form Study Prototype (Model). This type of prototype will allow designers to explore the basic size, look and feel of a product without simulating the actual function or exact visual appearance of the product. They can help assess ergonomic factors and provide insight into visual aspects of the product's final form. Form Study Prototypes are often hand-carved or machined models from easily sculpted, inexpensive materials (e.g., urethane foam), without representing the intended color, finish, or texture. Due to the materials used, these models are intended for internal decision making and are generally not durable enough or suitable for use by representative users or consumers.

User Experience Prototype (Model). A User Experience Model invites active human interaction and is primarily used to support user focused research. While intentionally not addressing possible aesthetic treatments, this type of model does more accurately represent the overall size, proportions, interfaces, and articulation of a promising concept. This type of model allows early assessment of how a potential user interacts with various elements, motions, and actions of a concept which define the initial use scenario and overall user experience. As these models are fully intended to be used and handled, more robust construction is key. Materials typically include plywood, REN shape, RP processes and CNC machined components. Construction of user experience models is typically driven by preliminary CAID/CAD which may be constructed from scratch or with methods such as industrial CT scanning.

Visual Prototype (Model) will capture the intended design aesthetic and simulate the appearance, color and surface textures of the intended product but will not actually embody the function(s) of the final product. These models will be suitable for use in market research, executive reviews and approval, packaging mock-ups, and photo shoots for sales literature.

Functional Prototype (Model) (also called a working prototype) will, to the greatest extent practical, attempt to simulate the final design, aesthetics, materials and functionality of the intended design. The functional prototype may be reduced in size (scaled down) in order to reduce costs. The construction of a fully working full-scale prototype and the ultimate test of concept, is the engineers' final check for design flaws and allows last-minute improvements to be made before larger production runs are ordered.

Differences between a prototype and a production design[link]

In general, prototypes will differ from the final production variant in three fundamental ways:

Materials. Production materials may require manufacturing processes involving higher capital costs than what is practical for prototyping. Instead, engineers or prototyping specialists will attempt to substitute materials with properties that simulate the intended final material.

Processes. Often expensive and time consuming unique tooling is required to fabricate a custom design. Prototypes will often compromise by using more variable processes, repeatable or controlled methods; substandard, inefficient, or substandard technology sources; or insufficient testing for technology maturity.

Lower fidelity. Final production designs often require extensive effort to capture high volume manufacturing detail. Such detail is generally unwarranted for prototypes as some refinement to the design is to be expected. Often prototypes are built using very limited engineering detail as compared to final production intent, which often uses statistical process controls and rigorous testing.

Characteristics and limitations of prototypes[link]

Engineers and prototyping specialists seek to understand the limitations of prototypes to exactly simulate the characteristics of their intended design. A degree of skill and experience is necessary to effectively use prototyping as a design verification tool.

It is important to realize that by their very definition, prototypes will represent some compromise from the final production design. Due to differences in materials, processes and design fidelity, it is possible that a prototype may fail to perform acceptably whereas the production design may have been sound. A counter-intuitive idea is that prototypes may actually perform acceptably whereas the production design may be flawed since prototyping materials and processes may occasionally outperform their production counterparts.

In general, it can be expected that individual prototype costs will be substantially greater than the final production costs due to inefficiencies in materials and processes. Prototypes are also used to revise the design for the purposes of reducing costs through optimization and refinement.

It is possible to use prototype testing to reduce the risk that a design may not perform acceptably, however prototypes generally cannot eliminate all risk. There are pragmatic and practical limitations to the ability of a prototype to match the intended final performance of the product and some allowances and engineering judgement are often required before moving forward with a production design.

Building the full design is often expensive and can be time-consuming, especially when repeated several times—building the full design, figuring out what the problems are and how to solve them, then building another full design. As an alternative, "rapid-prototyping" or "rapid application development" techniques are used for the initial prototypes, which implement part, but not all, of the complete design. This allows designers and manufacturers to rapidly and inexpensively test the parts of the design that are most likely to have problems, solve those problems, and then build the full design.

This counter-intuitive idea —that the quickest way to build something is, first to build something else— is shared by scaffolding and the telescope rule.

Modern trends[link]

With the recent advances in computer modeling it is becoming practical to eliminate the creation of a physical prototype (except possibly at greatly reduced scales for promotional purposes), instead modeling all aspects of the final product as a computer model. An example of such a development can be seen in the Boeing 787 Dreamliner, in which the first full sized physical realization is made on the series production line. Computer modeling is now being extensively used in automotive design, both for form (in the styling and aerodynamics of the vehicle) and in function — especially for improving vehicle crashworthiness and in weight reduction to improve mileage.

Mechanical and electrical engineering[link]

A prototype of the Polish economy hatchback car Beskid 106 designed in the 1980s.

The most common use of the word prototype is a functional, although experimental, version of a non-military machine (e.g., automobiles, domestic appliances, consumer electronics) whose designers would like to have built by mass production means, as opposed to a mockup, which is an inert representation of a machine's appearance, often made of some non-durable substance.

An electronics designer often builds the first prototype from breadboard or stripboard or perfboard, typically using "DIP" packages.

However, more and more often the first functional prototype is built on a "prototype PCB" almost identical to the production PCB, as PCB manufacturing prices fall and as many components are not available in DIP packages, but only available in SMT packages optimized for placing on a PCB.

Builders of military machines and aviation prefer the terms "experimental" and "service test".

Electronics prototyping[link]

In electronics, prototyping means building an actual circuit to a theoretical design to verify that it works, and to provide a physical platform for debugging it if it does not. The prototype is often constructed using techniques such as wire wrap or using veroboard or breadboard, that create an electrically correct circuit, but one that is not physically identical to the final product.

Open-source tools exist to document electronic prototypes (especially the breadboard-based ones) and move forward toward production such as Fritzing and Arduino.

A technician can build a prototype (and make additions and modifications) much more quickly with these techniques —however, it is much faster and usually cheaper to mass produce custom printed circuit boards than these other kinds of prototype boards. This is for the same reasons that writing a poem is fastest by hand for one or two, but faster by printing press if you need several thousand copies.

The proliferation of quick-turn pcb fab companies and quick-turn pcb assembly houses has enabled the concepts of rapid prototyping to be applied to electronic circuit design. It is now possible, even with the smallest passive components and largest fine-pitch packages, to have boards fabbed and parts assembled in a matter of days.

Computer programming/computer science[link]

In many programming languages, a function prototype is the declaration of a subroutine or function. (This term is rather C/C++-specific; other terms for this notion are signature, type and interface.) In prototype-based programming (a form of object-oriented programming), new objects are produced by cloning existing objects, which are called prototypes.^[3]

The term may also refer to the Prototype Javascript Framework.

Additionally, the term may refer to the prototype design pattern.

Prototype software is often referred to as alpha grade, meaning it is the first version to run. Often only a few functions are implemented, the primary focus of the alpha is to have a functional base code on to which features may be added. Once alpha grade software has most of the required features integrated into it, it becomes beta software for testing of the entire software and to adjust the program to respond correctly during situations unforeseen during development.^[4]

Often the end users may not be able to provide a complete set of application objectives, detailed input, processing, or output requirements in the initial stage. After the user evaluation, another prototype will be built based on feedback from users, and again the cycle returns to customer evaluation. The cycle starts by listening to the user, followed by building or revising a mock-up, and letting the user test the mock-up, then back. There is now a new generation of tools called Application Simulation Software which help quickly simulate application before their development.

Extreme programming uses iterative design to gradually add one feature at a time to the initial prototype.

Continuous learning approaches within organizations or businesses may also use the concept of business or process prototypes through software models.

Software release cycle[link]

Data prototyping[link]

A data prototype is a form of functional or working prototype. The justification for its creation is usually a data migration, data integration or application implementation project and the raw materials used as input are an instance of all the relevant data which exists at the start of the project.
The objectives of data prototyping are to produce:

• A set of data cleansing and transformation rules which have been seen to produce data which is all fit for purpose.
• A dataset which is the result of those rules being applied to an instance of the relevant raw (source) data.

To achieve this, a data architect uses a graphical interface to interactively develop and execute transformation and cleansing rules using raw data. The resultant data is then evaluated and the rules refined. Beyond the obvious visual checking of the data on-screen by the data architect, the usual evaluation and validation approaches are to use Data profiling software and then to insert the resultant data into a test version of the target application and trial its use.

Scale modeling[link]

In the field of scale modeling (which includes model railroading, vehicle modeling, airplane modeling, military modeling, etc.), a prototype is the real-world basis or source for a scale model—such as the real EMD GP38-2 locomotive—which is the prototype of Athearn's (among other manufacturers) locomotive model. Technically, any non-living object can serve as a prototype for a model, including structures, equipment, and appliances, and so on, but generally prototypes have come to mean full-size real-world vehicles including automobiles (the prototype 1957 Chevy has spawned many models), military equipment (such as M4 Shermans, a favorite among US Military modelers), railroad equipment, motor trucks, motorcycles, and space-ships (real-world such as Apollo/Saturn Vs, or the ISS).

There is debate whether 'fictional' or imaginary items can be considered prototypes (such as Star Wars or Star Trek starships, since the feature ships themselves are models or CGI-artifacts); however, humans and other living items are never called prototypes, even when they are the basis for models and dolls (especially - action figures).

As of 2005, conventional rapid prototype machines cost around £25,000.^[5]

Metrology[link]

In the science and practice of metrology, a prototype is a human-made object that is used as the standard of measurement of some physical quantity to base all measurement of that physical quantity against. Sometimes this standard object is called an artifact. In the International System of Units (SI), the only prototype remaining in current use is the International Prototype Kilogram, a solid platinum-iridium cylinder kept at the Bureau International des Poids et Mesures (International Bureau of Weights and Measures) in Sèvres France (a suburb of Paris) that by definition is the mass of exactly one kilogram. Copies of this prototype are fashioned and issued to many nations to represent the national standard of the kilogram and are periodically compared to the Paris prototype.

Until 1960, the meter was defined by a platinum-iridium prototype bar with two scratch marks on it (that were, by definition, spaced apart by one meter), the International Prototype Metre, and in 1983 the meter was redefined to be the distance in free space covered by light in 1/299,792,458 of a second (thus defining the speed of light to be 299,792,458 meters per second).

It is widely believed that the kilogram prototype standard will be replaced by a definition of the kilogram that will define another physical constant (likely either Planck's constant or the elementary charge) to a defined numerical value, thus obviating the need for the prototype and removing the possibility of the prototype (and thus the standard and definition of the kilogram) changing very slightly over the years because of loss or gain of atoms.

Sciences[link]

In many sciences, from pathology to taxonomy, prototype refers to a disease, species, etc. which sets a good example for the whole category. For example, the vaccina virus and Senegal bichir are regarded as the prototypes of their respective species.

Advantages and disadvantages[link]

Advantages of prototyping[link]

• May provide the proof of concept necessary to attract funding
• Early visibility of the prototype gives users an idea of what the final system looks like
• Encourages active participation among users and producer
• Enables a higher output for user
• Cost effective (Development costs reduced).
• Increases system development speed
• Assists to identify any problems with the efficacy of earlier design, requirements analysis and coding activities
• Helps to refine the potential risks associated with the delivery of the system being developed
• Various aspects can be tested and quicker feedback can be got from the user
• Helps to deliver the product in quality easily
• User interaction available during development cycle of prototype

Disadvantages of prototyping[link]

• Producer might produce a system inadequate for overall organization needs
• User can get too involved whereas the program can not be to a high standard
• Structure of system can be damaged since many changes could be made
• Producer might get too attached to it (might cause legal involvement)^{[verification needed]}
• Not suitable for large applications
• Over long periods, can cause loss in consumer interest and subsequent cancellation due to a lack of a market (for commercial products)
• May slow the development process, if there are large number of end users to satisfy.

References[link]

Prototype is an action-adventure open world video game developed by Radical Entertainment and published by Activision. The game was released in North America on June 9, 2009, and in southwestern parts of North America as well as Oceania on June 10, and was released in Europe on June 12.

The game is set in New York City, where a virulent plague known as Blacklight is spreading through Manhattan. Those infected are mutated into hideous monsters of varying form, with an uncontrollable urge to kill all uninfected life-forms. At the center of it is the protagonist, Alex Mercer, an incredibly powerful shapeshifter with no memory of his past. Parallel to the game's storyline is the ability to play the game as a sandbox-style video game giving the player freedom to roam Manhattan.

Many reviewers compared and contrasted it with Infamous, another action-adventure open world game released one month prior to Prototype, by Sucker Punch Productions which features a superpowered protagonist with developing powers in an urban world. However, the gameplay of Prototype is very similar to The Incredible Hulk: Ultimate Destruction, also by Radical Entertainment.^[4]

Gameplay[link]

Alex's primary superpower is his ability to shapeshift, changing his body to suit his needs. Going hand in hand with this power is his ability to "consume" others, absorbing them entirely. This process allows Alex to quickly regain health by absorbing the biomass of his enemies. This also allows him to take on the forms of the enemies he absorbs, thereby allowing the player to move about the enemy as one of them. The disguise will only last as long as Alex remains inconspicuous. Alex has incredible physical strength, and will kill most humans in a single punch. He can perform various melee attacks without shapeshifting, as well as more gymnastic moves such as air combos, sliding along the ground using any humanoid enemy's body, and a high-speed rolling cannonball attack.

Alex can also transform parts of his body into a selection of martial implements acquired over the course of the game, either as purchased upgrades or being given them. Offensive powers include the large and powerful Blade arm, fast razor-sharp Claws (which can also erupt large spikes from the ground), the telescoping Whipfist, Musclemass that augments his strength, and the slow but powerful Hammerfists. Defensive options consist of a large shield on Alex's left arm for blocking ballistic attacks that needs to regenerate after excessive damage, and full body armor that exchanges agility and speed for toughness in hand to hand combat; both will allow Alex to plow through most obstacles when active. Vision modes include thermal vision, which allows Alex to see enemies through smoke and other obstacles at the expense of a decreased vision range, and Infected vision, which highlights those infected with the BLACKLIGHT virus as well as military units. Both vision modes muffle all of Alex's other senses, such as hearing, in order to concentrate on his sight. One defensive and offensive power may be active at a time, and using either will negate Alex's current disguise. In addition to his own abilities, Alex can take the weapons from defeated or absorbed enemies. These include automatic rifles, machine guns, grenade launchers, and missile launchers. He can also seize control of military vehicles, such as tanks and helicopters.

Alex's most powerful attacks are the Devastators, which require Alex to be in Critical Mass - either a state of near-death or the exact opposite, having excess stored biomass and increased health. These include the Tendril Barrage, which fires impaling tendrils from his body in all directions, the Groundspike Graveyard, which erupts massive spikes from the ground all around Alex, and the Critical Pain, which fires a single beam of hardened biomass from his hands to severely damage a single target.

For movement around the city, the player uses extreme parkour, enhanced heavily by Alex's increased physical abilities. When sprinting, he will automatically hop over cars, barriers and other obstacles without losing momentum. Alex will also scale any wall he comes into contact with and simply knock aside any humanoids that get in his way without stopping. He can jump great heights and distances, enough to clear five-story buildings, and can sprint at extreme speed indefinitely. Falls cause no damage to the player even from the greatest heights. Even small jumps are enough for Alex to dent the ground beneath him, and falls from sufficient heights will create shockwaves at the point of impact which will kill most humans nearby and send objects as large as cars flying. Falling height also factors into several of Alex's melee attacks.

Enemies in the game are the Infected: those infected with the BLACKLIGHT virus, and the Military. The Infected consist of ordinary civilians infected with the virus that are generally not a threat to Alex. However, the Hunters, huge creatures created from Infected water towers, are one of the main enemies in the game. Evolved Hunters referred to as Leaders are one of the most powerful creatures in the game and are incredibly hard for Alex to kill. The Military consist of ordinary soldiers which are usually not a threat to Alex, although they are capable of operating weaponry that is extremely dangerous to Alex, such as tanks and heavily armed helicopters. The Military also consists of BLACKWATCH, an agency dedicated to combating biological and nuclear warfare. BLACKWATCH is one of the intricate parts of the game's story and create some of the most deadly biological weaponry to combat Alex, including viral detectors capable of detecting Alex even in his disguise, and, introduced later in the game, the deadly poison Bloodtox, capable of slowly killing Alex and the Infected. Introduced later in the game are heavily armored and durable soldiers referred to as Super Soldiers, capable of fighting against Alex and some of the strongest Infected.

In order to gain more advanced upgrades, Alex is capable of sneaking into Military Bases using a disguise and stealthily consume various officials within the base. He can also set off an alert within the base, in which the only way to escape is to slaughter whoever is in the base. Alex can also gain upgrades from the Infected by collecting genetic data. Infected Hives, like Military Bases, are located all over the city, and produce genetic data constantly. Alex can destroy the Infected Hives or simply absorb the data on the outside as it is being produced. At the start of the game, only small factions of the Infected and Military are present in the city. However, as the game progresses, the Military and the Infected begin to expand. Territory in the city is made out of three distinct zones. Blue Zones are in Military control and are relatively clean of the Infection. Red Zones thrive with the Infection, although there still remains a strong Military presence. In some areas of the city, a Blue Zone and a Red Zone might converge, creating a new and distinct Purple Zone. In these Zones, the Military and the Infected are in a constant battle for control. How the player decides to act in these Zones determine which faction seizes the territory.

Plot[link]

The game follows Alex J. Mercer (voiced by Barry Pepper) who wakes up in a morgue in the basement of Gentek, a genetic engineering company based in Manhattan, sending a pair of scientists that were just about to perform an autopsy running. Alex escapes, and witnesses the scientists being gunned down by military operatives. Alex is discovered and attacked. He survives bullets being fired into his chest, and leaps over a wall to safety. He soon discovers he now possesses powerful shapeshifting abilities, superhuman strength, speed, agility, durability, endurance, weaponry and the ability to "consume" people to gain their memories, skills and appearance. With no memory of his previous life, Alex decides to find and consume those related to the conspiracy in order to uncover the truth. During his quest, Alex faces two factions: the United States Marine Corps and Blackwatch, a Fort Detrick special forces unit dedicated to combating biological warfare; and the Infected, monsters created by a virus known as BLACKLIGHT that is overrunning Manhattan. Captain Robert Cross (voiced by Jeffrey Pierce), a Blackwatch officer, is given orders to find and contain Alex.

Alex makes contact with his sister, Dana, who assists him in tracking down targets, leading to the infiltration of Gentek headquarters. He finds a young woman called Elizabeth Greene contained in the building. Greene is a host for BLACKLIGHT and upon her escape unleashes it upon Manhattan. Dana directs Alex to Karen Parker, his ex-girlfriend. She agrees to aid him in stopping the virus, but leads him into a trap where he is confronted by Cross. During their battle, Alex is injected with a parasite that threatens to kill him. Alex seeks help from Dr. Ragland, a pathologist linked to Gentek. Ragland helps Alex remove the parasite and turn it into a weapon against Greene. However, using it on Greene only serves to create a monstrous being, the Supreme Hunter, which Alex kills.

The origins of the virus and Elizabeth Greene are uncovered through a contact: in 1969 the government tested the virus' predecessor in Hope, Idaho, designed to target predetermined races. The virus mutated into something far more deadly, and the whole population was infected. Elizabeth Greene was the sole survivor; an anomaly in her body's biology accepted the virus, rewriting her genetic code along with that of her unborn son, codenamed PARIAH. The remaining population of Hope, Idaho, was liquidated by Blackwatch. Greene and PARIAH were kept in captivity for further research.

Alex discovers his own past: Blackwatch shut down the Gentek project due to leaks and ordered all project personnel eliminated. Alex Mercer took a sample of BLACKLIGHT as "insurance". Eventually pinned down by Blackwatch in Penn Station, he decides to kill as many as he can, releasing the virus before being killed. The virus entered Mercer's body through the bullet holes and re-purposed itself at the cellular level.

The contact and Alex pump a new "BLOODTOX" biological agent underground in order to drive the virus above ground where it can be fought directly, causing Greene to emerge, encased in a towering monstrosity. Greene falls from the monster in human form once she is defeated, and is consumed by Alex. Through her memories, it becomes apparent that General Randall, head of Blackwatch, is prepared to destroy Manhattan with a nuclear weapon. The contact, revealed to be Cross, and Alex infiltrate the USS Ronald Reagan to stop him. Once Alex consumes Randall, Cross is revealed to be a Supreme Hunter, who assumed Cross' identity after consuming him, and attacks Alex. He defeats the Supreme Hunter and moves the weapon out into the Atlantic Ocean, where it detonates and catches him in the blast. His remains float back to the city and regenerate after consuming a crow.

During the credits, it is revealed that the public considers the military to have been the one who stopped the infection; a US Senator is heard telling the media that the events in Manhattan were a case of nuclear and biological terrorism, and promises retribution upon those responsible, Alex claims himself to be 'something less than human, but also something more'. After the credits, Manhattan is shown to be slowly recovering, the virus has been almost completely eradicated. Alex, standing on top of the Reuters Building in Times Square, comments that his work is almost done. He sets out on a quest to achieve his full potential, and eventually completes this task. From then on, Alex roams the city, dealing with Infected and military forces as needed.

Reception[link]

Prototype was released on Steam as well as in retail stores and topped the Steam sales on the week of its release.^[17] The Xbox 360 version of Prototype was the top selling game of June 2009 in North America, with over 419,900 units sold.^[18] This made the game a Platinum Hit. As of March, 2012, the game had sold 2.1 million copies worldwide.^[19] GameSpot gave the game a 8.5/10, praising the game for its "intriguing storyline and protagonist" and "massive arsenal of moves and abilities", but criticized the game for its "occasionally fiddly controls" and "dull scenery".^[20] The Escapist said the game was a perfect "summer fling," praising the combat and movement systems as well as the unique mechanic of the Web of Intrigue.^[21] The Onion A.V. Club gave the game an "A" ranking, calling the movement style "exhilarating" and saying it was a "mature, science-fiction superhero fantasy that somehow makes players feel simultaneously powerful and vulnerable." ^[22] SPOnG.com's Marcus Dyson awarded the game 84%, stating that "The complex controls can be daunting, but once mastered, unveil a huge array of dramatic moves and impressive weapons."^[23]

Prototype was released two weeks after Sucker Punch Productions' Infamous, a game with many similar concepts including a character with superpowers, and a large open world environment that can be traveled by climbing up buildings and gliding about the city.^[24][25] This led many game critics to compare and contrast the games.^[26][27][28] In his Zero Punctuation review of Prototype, Ben "Yahtzee" Croshaw compared the two games point for point, and determined that he could not tell which was the better game - Prototype won on open world gameplay and combat, while Infamous won on story and side missions.^[29] To decide which one was better, he jokingly stated that he'd award the best game to the team which created the best picture of the other main character wearing "a woman's bra". To his surprise, both development teams rose to the challenge, producing said images, and forcing Croshaw to call it a near-tie, edging out in favor of Infamous, though he still noted that, like their games, both images created independently were nearly equal in the themes that they included.^[30]

Soundtrack[link]

Sequel[link]

On December 6, 2010, a trailer of a sequel, Prototype 2 was revealed in the website www.murderyourmaker.com.

On July 20, 2011, a statement was released on Activision's website, stating that a sequel will be released on April 24, 2012.^[31][32]

Prototype 2 was released on April 24, 2012 for the Sony Playstation 3 and the Microsoft Xbox 360, it is set to be released on July 24, 2012 (North America) and July 30, 2012 (Europe) for the PC (Microsoft Windows)

Comic book[link]

A comic book series made by DC Comics Wildstorm was a spin-off as a prequel to the game and released alongside. It reveals more about Hope Idaho, Elizabeth Greene, and the viral outbreak. There are a total of 6 issues of the comic.

References[link]

External links[link]

Wikiquote has a collection of quotations related to: Prototype (video game)

• Official website
• Prototype at the Internet Movie Database