| Calcium carbonate |
 |
 |
 |
|
|
|
|
| Identifiers |
| CAS number |
471-34-1  Y |
| PubChem |
10112 |
| ChemSpider |
9708 Y |
| UNII |
H0G9379FGK Y |
| EC number |
207-439-9 |
| KEGG |
D00932 Y |
| ChEBI |
CHEBI:3311 Y |
| ChEMBL |
CHEMBL1200539 |
| RTECS number |
FF9335000 |
| ATC code |
A02AC01,A12AA04 |
| Jmol-3D images |
Image 1
Image 2 |
-
[Ca+2].[O-]C([O-])=O
C(=O)([O-])[O-].[Ca+2]
|
-
InChI=1S/CH2O3.Ca/c2-1(3)4;/h(H2,2,3,4);/q;+2/p-2 Y
Key: VTYYLEPIZMXCLO-UHFFFAOYSA-L Y
InChI=1/CH2O3.Ca/c2-1(3)4;/h(H2,2,3,4);/q;+2/p-2
Key: VTYYLEPIZMXCLO-NUQVWONBAS
|
| Properties |
| Molecular formula |
CaCO3 |
| Appearance |
Fine white powder |
| Odor |
odorless |
| Density |
2.711 g/cm3 (calcite)
2.83 g/cm3 (aragonite) |
| Melting point |
825 °C (aragonite)
1339 °C (calcite)[2]
|
| Boiling point |
decomposes
|
| Solubility in water |
0.15 g/100 mL (25°C) |
| Solubility product, Ksp |
4.8×10−9[1] |
| Solubility in dilute acids |
soluble |
| Acidity (pKa) |
9.0 |
| Refractive index (nD) |
1.59 |
| Structure |
| Crystal structure |
Trigonal |
| Space group |
32/m |
| Thermochemistry |
Std enthalpy of
formation ΔfHo298 |
−1207 kJ·mol−1[3] |
Standard molar
entropy So298 |
93 J·mol−1·K−1[3] |
| Hazards |
| MSDS |
ICSC 1193 |
| EU Index |
Not listed |
| NFPA 704 |
|
| Flash point |
825 °C |
| LD50 |
6450 mg/kg (oral, rat) |
| Related compounds |
| Other anions |
Calcium bicarbonate |
| Other cations |
Magnesium carbonate
Strontium carbonate
Barium carbonate |
| Related compounds |
Calcium sulfate |
 Y (verify) (what is:  Y/ N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
| Infobox references |
Crystal structure of calcite
Calcium carbonate is a chemical compound with the formula CaCO3. It is a common substance found in rocks in all parts of the world, and is the main component of shells of marine organisms, snails, coal balls, pearls, and eggshells. Calcium carbonate is the active ingredient in agricultural lime, and is usually the principal cause of hard water. It is commonly used medicinally as a calcium supplement or as an antacid, but excessive consumption can be hazardous.
Calcium carbonate shares the typical properties of other carbonates. Notably:
- it reacts with strong acids, releasing carbon dioxide:
- CaCO3(s) + 2 HCl(aq) → CaCl2(aq) + CO2(g) + H2O(l)
- it releases carbon dioxide on heating (to above 840 °C in the case of CaCO3), to form calcium oxide, commonly called quicklime, with reaction enthalpy 178 kJ / mole:
- CaCO3 → CaO + CO2
Calcium carbonate will react with water that is saturated with carbon dioxide to form the soluble calcium bicarbonate.
- CaCO3 + CO2 + H2O → Ca(HCO3)2
This reaction is important in the erosion of carbonate rocks, forming caverns, and leads to hard water in many regions.
The vast majority of calcium carbonate used in industry is extracted by mining or quarrying. Pure calcium carbonate (e.g. for food or pharmaceutical use), can be produced from a pure quarried source (usually marble).
Alternatively, calcium carbonate is prepared by calcining crude calcium oxide. Water is added to give calcium hydroxide, and carbon dioxide is passed through this solution to precipitate the desired calcium carbonate, referred to in the industry as precipitated calcium carbonate (PCC):[4]
- CaCO3 → CaO + CO2
- CaO + H2O → Ca(OH)2
- Ca(OH)2 + CO2 → CaCO3 + H2O
Calcite, Aragonite and Vaterite are pure calcium carbonate minerals. Other industrially important source minerals which are predominantly calcium carbonate include Limestone, Chalk, Marble and Travertine.
Eggshells, Snail Shells and most Seashells are predominantly calcium carbonate and can be used as industrial sources of that chemical. [5] Oyster shells have enjoyed recent notoriety as a source of dietary calcium, but are also a practical industrial source.[6][7] While not practical as an industrial source, dark green vegetables such as Broccoli and Kale contain dietarily significant amounts of calcium carbonate.[8]
Carbonate is found frequently in geologic settings and constitute an enormous carbon reservoir. Calcium carbonate occurs as aragonite and calcite. The carbonate minerals form the rock types: limestone, chalk, marble, travertine, tufa, and others.
In tropic settings, the waters are warm and clear. Corals are more abundant in this environment than towards the poles where the waters are cold. Calcium carbonate contributors, including plankton (such as coccoliths and planktic foraminifera), coralline algae, sponges, brachiopods, echinoderms, bryozoa and mollusks, are typically found in shallow water environments where sunlight and filterable food are more abundant. Cold-water carbonates do exist at higher latitudes but have a very slow growth rate. The calcification processes are changed by the ocean acidification.
Where the oceanic crust is subducted under a continental plate sediments will be carried down to warmer zones in the astenosphere and mesosphere where the calcium carbonate is decomposed to carbon dioxide which will give rise to explosive volcanic eruptions.
The carbonate compensation depth (CCD) is the point in the ocean where the rate of precipitation of calcium carbonate is balanced by the rate of dissolution due to the conditions present. Deep in the ocean, the temperature drops and pressure increases. Calcium carbonate is unusual in that its solubility increases with decreasing temperature. Increasing pressure also increases the solubility of calcium carbonate. The CCD can range from 4–6 km below sea level.
Calcium carbonate can preserve fossils through permineralization. Most of the vertebrate fossils of the Two Medicine Formation -- a geologic formation known for its duck-billed dinosaur eggs -- are preserved by CaCO3 permineralization.[9] This type of preservation preserves high levels of detail, even down to the microscopic level.[9] However, it also leaves specimens vulnerable to weathering when exposed to the surface.[9]
The main use of calcium carbonate is in the construction industry, either as a building material or limestone aggregate for roadbuilding or as an ingredient of cement or as the starting material for the preparation of builder's lime by burning in a kiln. However, due to weathering mainly caused by acid rain, calcium carbonate (in limestone form) is no longer used for building purposes on its own, and only as a raw/primary substance for building materials.
Calcium carbonate is also used in the purification of iron from iron ore in a blast furnace. The carbonate is calcined in situ to give calcium oxide, which forms a slag with various impurities present, and separates from the purified iron.[10]
In the oil industry, calcium carbonate is added to drilling fluids as a formation-bridging and filtercake-sealing agent; it is also a weighting material which increases the density of drilling fluids to control the downhole pressure. Calcium carbonate is added to swimming pools, as a pH corrector for maintaining alkalinity and offsetting the acidic properties of the disinfectant agent.
Calcium carbonate has traditionally been a major component of blackboard chalk. However, modern manufactured chalk is mostly gypsum, hydrated calcium sulfate CaSO4·2H2O. Calcium carbonate is a main source for growing Seacrete, or Biorock. Precipitated calcium carbonate (PCC), pre-dispersed in slurry form, is a common filler material for latex gloves with the aim of achieving maximum saving in material and production costs.[11]
Fine ground calcium carbonate (GCC) is an essential ingredient in the microporous film used in babies' diapers and some building films as the pores are nucleated around the calcium carbonate particles during the manufacture of the film by biaxial stretching. GCC or PCC is used as a filler in paper because they are cheaper than wood fiber. Printing and writing paper can contain 10–20% calcium carbonate. In North America, calcium carbonate has begun to replace kaolin in the production of glossy paper. Europe has been practicing this as alkaline papermaking or acid-free papermaking for some decades. PCC has a very fine and controlled particle size, on the order of 2 micrometres in diameter, useful in coatings for paper.
Calcium carbonate is widely used as an extender in paints,[12] in particular matte emulsion paint where typically 30% by weight of the paint is either chalk or marble. It is also a popular filler in plastics.[12] Some typical examples include around 15 to 20% loading of chalk in unplasticized polyvinyl chloride (uPVC) drain pipe, 5 to 15% loading of stearate coated chalk or marble in uPVC window profile. PVC cables can use calcium carbonate at loadings of up to 70 phr (parts per hundred parts of resin) to improve mechanical properties (tensile strength and elongation) and electrical properties (volume resistivity). Polypropylene compounds are often filled with calcium carbonate to increase rigidity, a requirement that becomes important at high use temperatures.[13] Here the percentage is often 20–40%. It also routinely used as a filler in thermosetting resins (sheet and bulk molding compounds)[13] and has also been mixed with ABS, and other ingredients, to form some types of compression molded "clay" poker chips. Precipitated calcium carbonate, made by dropping calcium oxide into water, is used by itself or with additives as a white paint, known as whitewashing.
Calcium carbonate is added to a wide range of trade and do it yourself adhesives, sealants, and decorating fillers.[12] Ceramic tile adhesives typically contain 70 to 80% limestone. Decorating crack fillers contain similar levels of marble or dolomite. It is also mixed with putty in setting stained glass windows, and as a resist to prevent glass from sticking to kiln shelves when firing glazes and paints at high temperature.
In ceramics/glazing applications, calcium carbonate is known as whiting,[12] and is a common ingredient for many glazes in its white powdered form. When a glaze containing this material is fired in a kiln, the whiting acts as a flux material in the glaze. Ground calcium carbonate is an abrasive (both as scouring powder and as an ingredient of household scouring creams), in particular in its calcite form, which has the relatively low hardness level of 3 on the Mohs scale of mineral hardness, and will therefore not scratch glass and most other ceramics, enamel, bronze, iron, and steel, and have a moderate effect on softer metals like aluminium and copper. A paste made from calcium carbonate and deionized water can be used to clean tarnish on silver.[14]
500-milligram calcium supplements made from calcium carbonate
Calcium carbonate is widely used medicinally as an inexpensive dietary calcium supplement or gastric antacid.[15] It may be used as a phosphate binder for the treatment of hyperphosphatemia (primarily in patients with chronic renal failure). It is also used in the pharmaceutical industry as an inert filler for tablets and other pharmaceuticals.[16]
Calcium carbonate is known among IBS sufferers to help reduce diarrhea[citation needed]. Some individuals report being symptom-free since starting supplementation. The process in which calcium carbonate reduces diarrhea is by binding water in the bowel, which creates a stool that is firmer and better formed. Calcium carbonate supplements are often combined with magnesium in various proportions. This should be taken into account as magnesium is known to cause diarrhea.
Calcium carbonate is used in the production of toothpaste and has seen a resurgence as a food preservative and color retainer, when used in or with products such as organic apples or food.[17]
Excess calcium from supplements, fortified food and high-calcium diets, can cause the milk-alkali syndrome, which has serious toxicity and can be fatal. In 1915, Bertram Sippy introduced the "Sippy regimen" of hourly ingestion of milk and cream, and the gradual addition of eggs and cooked cereal, for 10 days, combined with alkaline powders, which provided symptomatic relief for peptic ulcer disease. Over the next several decades, the Sippy regimen resulted in renal failure, alkalosis, and hypercalcemia, mostly in men with peptic ulcer disease. These adverse effects were reversed when the regimen stopped, but it was fatal in some patients with protracted vomiting. Milk alkali syndrome declined in men after effective treatments for peptic ulcer disease arose. During the past 15 years, it has been reported in women taking calcium supplements above the recommended range of 1.2 to 1.5 g daily, for prevention and treatment of osteoporosis, and is exacerbated by dehydration. Calcium has been added to over-the-counter products, which contributes to inadvertent excessive intake. Excessive calcium intake can lead to hypercalcemia, complications of which include vomiting, abdominal pain and altered mental status.[18]
As a food additive it is designated E170;[19] INS number 170. Used as an acidity regulator, anticaking agent, stabiliser or colour it is approved for usage in the EU,[20] USA[21] and Australia and New Zealand.[22] It is used in some soy milk products as a source of dietary calcium; one study suggests that calcium carbonate might be as bioavailable as the calcium in cow's milk.[23] Calcium carbonate is also used as a firming agent in many canned or bottled vegetable products.
In 1989, a researcher, Ken Simmons, introduced CaCO3 into the Whetstone Brook in Massachusetts.[24] His hope was that the calcium carbonate would counter the acid in the stream from acid rain and save the trout that had ceased to spawn. Although his experiment was a success, it did increase the amounts of aluminium ions in the area of the brook that was not treated with the limestone. This shows that CaCO3 can be added to neutralize the effects of acid rain in river ecosystems. Currently calcium carbonate is used to neutralize acidic conditions in both soil and water.[25][26] Since the 1970s, such liming has been practiced on a large scale in Sweden to mitigate acidification and several thousand lakes and streams are limed repeatedly.[27]
Calcination of limestone using charcoal fires to produce quicklime has been practiced since antiquity by cultures all over the world. The temperature at which limestone yields calcium oxide is usually given as 825 °C, but stating an absolute threshold is misleading. Calcium carbonate exists in equilibrium with calcium oxide and carbon dioxide at any temperature. At each temperature there is a partial pressure of carbon dioxide that is in equilibrium with calcium carbonate. At room temperature the equilibrium overwhelmingly favors calcium carbonate, because the equilibrium CO2 pressure is only a tiny fraction of the partial CO2 pressure in air, which is about 0.035 kPa.
At temperatures above 550 °C the equilibrium CO2 pressure begins to exceed the CO2 pressure in air. So above 550 °C, calcium carbonate begins to outgas CO2 into air. However, in a charcoal fired kiln, the concentration of CO2 will be much higher than it is in air. Indeed if all the oxygen in the kiln is consumed in the fire, then the partial pressure of CO2 in the kiln can be as high as 20 kPa.[4]
The table shows that this equilibrium pressure is not achieved until the temperature is nearly 800 °C. For the outgassing of CO2 from calcium carbonate to happen at an economically useful rate, the equilibrium pressure must significantly exceed the ambient pressure of CO2. And for it to happen rapidly, the equilibrium pressure must exceed total atmospheric pressure of 101 kPa, which happens at 898 °C.
| Equilibrium pressure of CO2 over CaCO3 (P) vs. temperature (T).[28] |
| P (kPa) |
0.055 |
0.13 |
0.31 |
1.80 |
5.9 |
9.3 |
14 |
24 |
34 |
51 |
72 |
80 |
91 |
101 |
179 |
901 |
3961 |
| T (°C) |
550 |
587 |
605 |
680 |
727 |
748 |
777 |
800 |
830 |
852 |
871 |
881 |
891 |
898 |
937 |
1082 |
1241 |
[edit] With varying CO2 pressure
Calcium ion solubility as a function of
CO2 partial pressure at 25 °C (Ksp = 4.47×10−9) |
Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\text{CO}_2}
(atm)
|
pH |
[Ca2+] (mol/L) |
| 10−12 |
12.0 |
5.19 × 10−3 |
| 10−10 |
11.3 |
1.12 × 10−3 |
| 10−8 |
10.7 |
2.55 × 10−4 |
| 10−6 |
9.83 |
1.20 × 10−4 |
| 10−4 |
8.62 |
3.16 × 10−4 |
| 3.5 × 10−4 |
8.27 |
4.70 × 10−4 |
| 10−3 |
7.96 |
6.62 × 10−4 |
| 10−2 |
7.30 |
1.42 × 10−3 |
| 10−1 |
6.63 |
3.05 × 10−3 |
| 1 |
5.96 |
6.58 × 10−3 |
| 10 |
5.30 |
1.42 × 10−2 |
Calcium carbonate is poorly soluble in pure water (47 mg/L at normal atmospheric CO2 partial pressure as shown below).
The equilibrium of its solution is given by the equation (with dissolved calcium carbonate on the right):
-
CaCO3  Ca2+ + CO32– |
Ksp = 3.7×10−9 to 8.7×10−9 at 25 °C |
where the solubility product for [Ca2+][CO32–] is given as anywhere from Ksp = 3.7×10−9 to Ksp = 8.7×10−9 at 25 °C, depending upon the data source.[28][29] What the equation means is that the product of molar concentration of calcium ions (moles of dissolved Ca2+ per liter of solution) with the molar concentration of dissolved CO32– cannot exceed the value of Ksp. This seemingly simple solubility equation, however, must be taken along with the more complicated equilibrium of carbon dioxide with water (see carbonic acid). Some of the CO32– combines with H+ in the solution according to:
-
| HCO3– H+ + CO32– |
Ka2 = 5.61×10−11 at 25 °C |
HCO3– is known as the bicarbonate ion. Calcium bicarbonate is many times more soluble in water than calcium carbonate—indeed it exists only in solution.
Some of the HCO3– combines with H+ in solution according to:
-
| H2CO3 H+ + HCO3– |
Ka1 = 2.5×10−4 at 25 °C |
Some of the H2CO3 breaks up into water and dissolved carbon dioxide according to:
-
| H2O + CO2(dissolved) H2CO3 |
Kh = 1.70×10−3 at 25 °C |
And dissolved carbon dioxide is in equilibrium with atmospheric carbon dioxide according to:
-
| Failed to parse (Missing texvc executable; please see math/README to configure.): \frac{P_{\text{CO}_2}}{[\text{CO}_2]}\ =\ k_\text{H} |
where kH = 29.76 atm/(mol/L) at 25 °C (Henry constant), Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\text{CO}_2}
being the CO2 partial pressure.
|
For ambient air, Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\text{CO}_2}
is around 3.5×10−4 atmospheres (or equivalently 35 Pa). The last equation above fixes the concentration of dissolved CO2 as a function of Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\text{CO}_2}
, independent of the concentration of dissolved CaCO3. At atmospheric partial pressure of CO2, dissolved CO2 concentration is 1.2×10−5 moles/liter. The equation before that fixes the concentration of H2CO3 as a function of [CO2]. For [CO2]=1.2×10−5, it results in [H2CO3]=2.0×10−8 moles per liter. When [H2CO3] is known, the remaining three equations together with
-
| H2O H+ + OH– |
K = 10−14 at 25 °C |
(which is true for all aqueous solutions), and the fact that the solution must be electrically neutral,
- 2[Ca2+] + [H+] = [HCO3–] + 2[CO32–] + [OH–]
make it possible to solve simultaneously for the remaining five unknown concentrations (note that the above form of the neutrality equation is valid only if calcium carbonate has been put in contact with pure water or with a neutral pH solution; in the case where the origin water solvent pH is not neutral, the equation is modified).
Travertine calcium carbonate deposits from a
hot spring
The table on the right shows the result for [Ca2+] and [H+] (in the form of pH) as a function of ambient partial pressure of CO2 (Ksp = 4.47×10−9 has been taken for the calculation).
- At atmospheric levels of ambient CO2 the table indicates the solution will be slightly alkaline with a maximum CaCO3 solubility of 47 mg/L.
- As ambient CO2 partial pressure is reduced below atmospheric levels, the solution becomes more and more alkaline. At extremely low Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\text{CO}_2}
, dissolved CO2, bicarbonate ion, and carbonate ion largely evaporate from the solution, leaving a highly alkaline solution of calcium hydroxide, which is more soluble than CaCO3. Note that for Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\text{CO}_2}
= 10−12 atm, the [Ca2+][OH−]2 product is still below the solubility product of Ca(OH)2 (8×10−6). For still lower CO2 pressure, Ca(OH)2 precipitation will occur before CaCO3 precipitation.
- As ambient CO2 partial pressure increases to levels above atmospheric, pH drops, and much of the carbonate ion is converted to bicarbonate ion, which results in higher solubility of Ca2+.
The effect of the latter is especially evident in day-to-day life of people who have hard water. Water in aquifers underground can be exposed to levels of CO2 much higher than atmospheric. As such water percolates through calcium carbonate rock, the CaCO3 dissolves according to the second trend. When that same water then emerges from the tap, in time it comes into equilibrium with CO2 levels in the air by outgassing its excess CO2. The calcium carbonate becomes less soluble as a result and the excess precipitates as lime scale. This same process is responsible for the formation of stalactites and stalagmites in limestone caves.
Two hydrated phases of calcium carbonate, monohydrocalcite, CaCO3·H2O and ikaite, CaCO3·6H2O, may precipitate from water at ambient conditions and persist as metastable phases.
Consider the problem of the maximum solubility of calcium carbonate in normal atmospheric conditions (Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle P_{\mathrm{CO}_2}
= 3.5 × 10−4 atm) when the pH of the solution is adjusted. This is for example the case in a swimming pool where the pH is maintained between 7 and 8 (by addition of sodium bisulfate NaHSO4 to decrease the pH or of sodium bicarbonate NaHCO3 to increase it). From the above equations for the solubility product, the hydration reaction and the two acid reactions, the following expression for the maximum [Ca2+] can be easily deduced:
- Failed to parse (Missing texvc executable; please see math/README to configure.): [\text{Ca}^{2+}]_\text{max} = \frac{K_\text{sp}k_\text{H}} {K_\text{h}K_\text{a1}K_\text{a2}} \frac{[\text{H}^+]^2}{P_{\text{CO}_2}}
showing a quadratic dependence in [H+]. The numerical application with the above values of the constants gives[citation needed]
| pH |
7.0 |
7.2 |
7.4 |
7.6 |
7.8 |
8.0 |
8.2 |
8.27 |
8.4 |
| [Ca2+]max (10−6mol/L) |
180 |
71.7 |
28.5 |
11.4 |
4.52 |
1.80 |
0.717 |
0.519 |
0.285 |
| [Ca2+]max (mg/L) |
7.21 |
2.87 |
1.14 |
0.455 |
0.181 |
0.0721 |
0.0287 |
0.0208 |
0.0114 |
Comments:
- decreasing the pH from 8 to 7 increases the maximum Ca2+ concentration by a factor 100. Water with a pH maintained to 7 can dissolve up to 15.9 mg/L of CaCO3. This explains the high Ca2+ concentration in some mineral waters with pH close to 7.
- note that the Ca2+ concentration of the previous table is recovered for pH = 8.27
- keeping the pH to 7.4 in a swimming pool (which gives optimum HClO/ClO− ratio in the case of "chlorine" maintenance) results in a maximum Ca2+ concentration of 1010 mg/L. This means that successive cycles of water evaporation and partial renewing may result in a very hard water before CaCO3 precipitates (water with a Ca2+ concentration above 120 mg/L is considered very hard). Addition of a calcium sequestering agent or complete renewing of the water will solve the problem.
Solutions of strong (HCl), moderately strong (sulfamic) or weak (acetic, citric, sorbic, lactic, phosphoric) acids are commercially available. They are commonly used as descaling agents to remove limescale deposits. The maximum amount of CaCO3 that can be "dissolved" by one liter of an acid solution can be calculated using the above equilibrium equations.
- In the case of a strong monoacid with decreasing acid concentration [A] = [A−], we obtain (with CaCO3 molar mass = 100 g):
| [A] (mol/L) |
1 |
10−1 |
10−2 |
10−3 |
10−4 |
10−5 |
10−6 |
10−7 |
10−10 |
| Initial pH |
0.00 |
1.00 |
2.00 |
3.00 |
4.00 |
5.00 |
6.00 |
6.79 |
7.00 |
| Final pH |
6.75 |
7.25 |
7.75 |
8.14 |
8.25 |
8.26 |
8.26 |
8.26 |
8.27 |
| Dissolved CaCO3 (g per liter of acid) |
50.0 |
5.00 |
0.514 |
0.0849 |
0.0504 |
0.0474 |
0.0471 |
0.0470 |
0.0470 |
where the initial state is the acid solution with no Ca2+ (not taking into account possible CO2 dissolution) and the final state is the solution with saturated Ca2+. For strong acid concentrations, all species have a negligible concentration in the final state with respect to Ca2+ and A− so that the neutrality equation reduces approximately to 2[Ca2+] = [A−] yielding Failed to parse (Missing texvc executable; please see math/README to configure.): \scriptstyle[\mathrm{Ca}^{2+}] \simeq \frac{[\mathrm{A}^-]}{2} . When the concentration decreases, [HCO3−] becomes non-negligible so that the preceding expression is no longer valid. For vanishing acid concentrations, one can recover the final pH and the solubility of CaCO3 in pure water.
- In the case of a weak monoacid (here we take acetic acid with pKA = 4.76) with decreasing total acid concentration [A] = [A−]+[AH], we obtain:
| [A] (mol/L) |
1 |
10−1 |
10−2 |
10−3 |
10−4 |
10−5 |
10−6 |
10−7 |
10−10 |
| Initial pH |
2.38 |
2.88 |
3.39 |
3.91 |
4.47 |
5.15 |
6.02 |
6.79 |
7.00 |
| Final pH |
6.75 |
7.25 |
7.75 |
8.14 |
8.25 |
8.26 |
8.26 |
8.26 |
8.27 |
| Dissolved CaCO3 (g per liter of acid) |
49.5 |
4.99 |
0.513 |
0.0848 |
0.0504 |
0.0474 |
0.0471 |
0.0470 |
0.0470 |
For the same total acid concentration, the initial pH of the weak acid is less acid than the one of the strong acid; however, the maximum amount of CaCO3 which can be dissolved is approximately the same. This is because in the final state, the pH is larger than the pKA, so that the weak acid is almost completely dissociated, yielding in the end as many H+ ions as the strong acid to "dissolve" the calcium carbonate.
- The calculation in the case of phosphoric acid (which is the most widely used for domestic applications) is more complicated since the concentrations of the four dissociation states corresponding to this acid must be calculated together with [HCO3−], [CO32−], [Ca2+], [H+] and [OH−]. The system may be reduced to a seventh degree equation for [H+] the numerical solution of which gives
| [A] (mol/L) |
1 |
10−1 |
10−2 |
10−3 |
10−4 |
10−5 |
10−6 |
10−7 |
10−10 |
| Initial pH |
1.08 |
1.62 |
2.25 |
3.05 |
4.01 |
5.00 |
5.97 |
6.74 |
7.00 |
| Final pH |
6.71 |
7.17 |
7.63 |
8.06 |
8.24 |
8.26 |
8.26 |
8.26 |
8.27 |
| Dissolved CaCO3 (g per liter of acid) |
62.0 |
7.39 |
0.874 |
0.123 |
0.0536 |
0.0477 |
0.0471 |
0.0471 |
0.0470 |
where [A] = [H3PO4] + [H2PO4−] + [HPO42−] + [PO43−] is the total acid concentration. Thus phosphoric acid is more efficient than a monoacid since at the final almost neutral pH, the second dissociated state concentration [HPO42−] is not negligible (see phosphoric acid).
- ^ Patnaik, Pradyot (2003). Handbook of Inorganic Chemical Compounds. McGraw-Hill. ISBN 0-07-049439-8. http://books.google.com/?id=Xqj-TTzkvTEC. Retrieved 2009-06-06.
- ^ "Occupational safety and health guideline for calcium carbonate". US Dept. of Health and Human Services. http://www.cdc.gov/niosh/docs/81-123/pdfs/0090.pdf. Retrieved 31 March 2011.
- ^ a b Zumdahl, Steven S. (2009). Chemical Principles 6th Ed.. Houghton Mifflin Company. p. A21. ISBN 0-618-94690-X.
- ^ a b "Solvay Precipitated Calcium Carbonate: Production". Solvay S. A.. 2007-03-09. http://www.solvaypcc.com/safety_environment/0,0,1000044-_EN,00.html. Retrieved 2007-12-30.
- ^ Francis Horne (23 October 2006). "How are seashells created?". Scientific American. http://www.scientificamerican.com/article.cfm?id=how-are-seashells-created. Retrieved 25 April 2012.
- ^ "WebMD: Oyster shell calcium". WebMD. http://www.webmd.com/drugs/drug-16642-Natural+Oyster+Shell+Calcium+Oral.aspx?drugid=16642&drugname=Natural+Oyster+Shell+Calcium+Oral. Retrieved 25 April 2012.
- ^ "Oyster Shell Calcium Carbonate". Caltron Clays & Chemicals. http://caltronclays.in/Oyster_CC.html.
- ^ Heaney, R.P.; Weaver, C.M.; Hinders, SM.; Martin, B.; Packard, P.T. (1993). "Absorbability of Calcium from Brassica Vegetables: Broccoli, Bok Choy, and Kale". Journal of Food Science 58 (6): 1378–1380. DOI:10.1111/j.1365-2621.1993.tb06187.x.
- ^ a b c Trexler, D., 2001, Two Medicine Formation, Montana: geology and fauna: In: Mesozoic Vertebrate Life, edited by Tanke, D. H., and Carpenter, K., Indiana University Press, pp. 298–309. ISBN 0-253-33907-3
- ^ "Blast Furnace". Science Aid. http://www.scienceaid.co.uk/chemistry/industrial/blastfurnace.html. Retrieved 2007-12-30.
- ^ "Precipitated Calcium Carbonate uses". http://www.aristocratholding.com/calris-5.html.
- ^ a b c d "Calcium Carbonate Powder". Reade Advanced Materials. 2006-02-04. http://www.reade.com/Products/Minerals_and_Ores/calcium_carbonate.html. Retrieved 2007-12-30.
- ^ a b "Calcium carbonate in plastic applications". Imerys Performance Minerals. http://www.imerys-perfmins.com/calcium-carbonate/eu/calcium-carbonate-plastic.htm. Retrieved 2008-08-01.
- ^ "Ohio Historical Society Blog: Make It Shine". Ohio Historical Society. http://ohiohistory.wordpress.com/2011/06/02/making-it-shine/.
- ^ "Calcium Carbonate". Medline Plus. National Institutes of Health. 2005-10-01. Archived from the original on 2007-10-17. http://web.archive.org/web/20071017031324/http://www.nlm.nih.gov/medlineplus/druginfo/medmaster/a601032.html. Retrieved 2007-12-30.
- ^ Herbert A. Lieberman, Leon Lachman, Joseph B. Schwartz (1990). Pharmaceutical Dosage Forms: Tablets. New York: Dekker. p. 153. ISBN 0-8247-8044-2.
- ^ Food Additives – Names Starting with C. Chemistry.about.com (2012-04-10). Retrieved on 2012-05-24.
- ^ Ilan Gabriely et al. (2008). "Clinical problem-solving, back to basics". New England Journal of Medicine 358 (18): 1952–6. DOI:10.1056/NEJMcps0706188. PMID 18450607.
- ^ "Food-Info.net : E-numbers : E170 Calcium carbonate". http://www.food-info.net/uk/e/e170.htm. 080419 food-info.net
- ^ UK Food Standards Agency: "Current EU approved additives and their E Numbers". http://www.food.gov.uk/safereating/chemsafe/additivesbranch/enumberlist. Retrieved 2011-10-27.
- ^ US Food and Drug Administration: "Listing of Food Additives Status Part I". http://www.fda.gov/Food/FoodIngredientsPackaging/FoodAdditives/FoodAdditiveListings/ucm091048.htm. Retrieved 2011-10-27.
- ^ Australia New Zealand Food Standards Code"Standard 1.2.4 – Labelling of ingredients". http://www.comlaw.gov.au/Details/F2011C00827. Retrieved 2011-10-27.
- ^ Y. Zhao, B. R. Martin and C. M. Weaver (2005). "Calcium Bioavailability of Calcium Carbonate Fortified Soymilk Is Equivalent to Cow's Milk in Young Women". J. Nutr. 135 (10): 2379–2382. PMID 16177199.
- ^ Associated Press (1989-06-13). "Limestone Dispenser Fights Acid Rain in Stream". New York Times. http://query.nytimes.com/gst/fullpage.html?res=950DEFD9173FF930A25755C0A96F948260.
- ^ R. K. Schreiber (1988). "Cooperative federal-state liming research on surface waters impacted by acidic deposition". Water, Air, & Soil Pollution 41 (1): 53–73. DOI:10.1007/BF00160344.
- ^ Dan Kircheis; Richard Dill (2006). "Effects of low pH and high aluminum on Atlantic salmon smolts in Eastern Maine and liming project feasibility analysis" (reprinted at Downeast Salmon Federation). National Marine Fisheries Service and Maine Atlantic Salmon Commission. http://www.mainesalmonrivers.org/pages/Liming%20Project%20Rpt.pdf.
- ^ M. Guhren, C. Bigler and I. Renberg (2007). "Liming placed in a long-term perspective: A paleolimnological study of 12 lakes in the Swedish liming program". Journal of Paleolimnology 37 (2): 247–258. DOI:10.1007/s10933-006-9014-9.
- ^ a b Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
- ^ "Selected Solubility Products and Formation Constants at 25 °C". California State University, Dominguez Hills. http://www.csudh.edu/oliver/chemdata/data-ksp.htm.
