Wikimedia Commons has media related to: 18

Year 18 (XVIII) was a common year starting on Saturday (link will display the full calendar) of the Julian calendar. At the time, it was known as the Year of the Consulship of Augustus and Caesar (or, less frequently, year 771 Ab urbe condita). The denomination 18 for this year has been used since the early medieval period, when the Anno Domini calendar era became the prevalent method in Europe for naming years.

Events[link]

By place[link]

Roman Empire[link]

• Emperor Tiberius and Germanicus are Roman Consuls.
• A vexillatio (sub-unit) of Legio III Augusta is destroyed by an ambush in Africa.
• The German chieftain Arminius destroys the kingdom of the Marcomanni.

Syria[link]

• Winter – Germanicus Caesar arrived in Syria, as new commander in chief for the Roman East.
• Gnaeus Calpurnius Piso, governor of Syria, ignored the order of Germanicus to send Syrian-based legions, including Legio VI Ferrata and Legio X Fretensis, to Armenia to back him in his planned coronation of Artaxias III.

Parthia[link]

• Germanicus conclude a peace treaty with Artabanus II of Parthia, in which he is recognized as king and friend of Rome.

China[link]

• After a flooding of the Yellow River farmers are forced to rebel. Emperor Wang Mang reacts by sending an army (some 100,000 men) against the agrarian rebels. The rebel leaders, concerned that during battle it would become impossible to tell friend from foe, order that their men color their eyebrows red – and this is where the name Chimei ("The Red Eyebrows") comes from.

India[link]

• In India, the Indo-Parthians control Taxila.

Births[link]

Deaths[link]

• Ovid, Roman poet (or 17)
• Yang Xiong, Chinese philosopher, poet, and author (b. 53 BC)

References[link]

This article contains instructions, advice, or how-to content. The purpose of Wikipedia is to present facts, not to train. Please help improve this article either by rewriting the how-to content or by moving it to Wikiversity or Wikibooks. (July 2011)

Text file created with gedit and viewed with a hex editor
Besides the text objects there are only EOL markers
with the hexadecimal value 0A.

In computing, a newline,^[1] also known as a line break or end-of-line (EOL) marker, is a special character or sequence of characters signifying the end of a line of text. The name comes from the fact that the next character after the newline will appear on a new line—that is, on the next line below the text immediately preceding the newline. The actual codes representing a newline vary across operating systems, which can be a problem when exchanging text files between systems with different newline representations.

There is also some confusion whether newlines terminate or separate lines. If a newline is considered a separator, there will be no newline after the last line of a file. The general convention on most systems is to add a newline even after the last line, i.e. to treat newline as a line terminator. Some programs have problems processing the last line of a file if it is not newline terminated. Conversely, programs that expect newline to be used as a separator will interpret a final newline as starting a new (empty) line.

In text intended primarily to be read by humans using software which implements the word wrap feature, a newline character typically only needs to be stored if a line break is required independent of whether the next word would fit on the same line, such as between paragraphs and in vertical lists. See hard return and soft return.

Representations[link]

Software applications and operating systems usually represent a newline with one or two control characters:

• Systems based on ASCII or a compatible character set use either LF (Line feed, '\n', 0x0A, 10 in decimal) or CR (Carriage return, '\r', 0x0D, 13 in decimal) individually, or CR followed by LF (CR+LF, '\r\n', 0x0D0A). These characters are based on printer commands: The line feed indicated that one line of paper should feed out of the printer thus instructed the printer to advance the paper one line, and a carriage return indicated that the printer carriage should return to the beginning of the current line. Some rare systems, such as QNX before version 4, used the ASCII RS (record separator, 0x1E, 30 in decimal) character as the newline character.
  • LF:    Multics, Unix and Unix-like systems (GNU/Linux, Mac OS X, FreeBSD, AIX, Xenix, etc.), BeOS, Amiga, RISC OS and others.
  • CR+LF: Microsoft Windows, DEC TOPS-10, RT-11 and most other early non-Unix and non-IBM OSes, CP/M, MP/M, DOS (MS-DOS, PC-DOS, etc.), Atari TOS, OS/2, Symbian OS, Palm OS
  • LF+CR: Acorn BBC and RISC OS spooled text output.
  • CR:    Commodore 8-bit machines, Acorn BBC, TRS-80, Apple II family, Mac OS up to version 9 and OS-9
  • RS:    QNX pre-POSIX implementation.
• EBCDIC systems—mainly IBM mainframe systems, including z/OS (OS/390) and i5/OS (OS/400)—use NEL (Next Line, 0x15) as the newline character. Note that EBCDIC also has control characters called CR and LF, but the numerical value of LF (0x25) differs from the one used by ASCII (0x0A). Additionally, there are some EBCDIC variants that also use NEL but assign a different numeric code to the character.
• Operating systems for the CDC 6000 series defined a newline as two or more zero-valued six-bit characters at the end of a 60-bit word. Some configurations also defined a zero-valued character as a colon character, with the result that multiple colons could be interpreted as a newline depending on position.
• ZX80 and ZX81, home computers from Sinclair Research Ltd used a specific non-ASCII character set with code NEWLINE (0x76, 118 decimal) as the newline character.
• OpenVMS uses a record-based file system, which stores text files as one record per line. In most file formats, no line terminators are actually stored, but the Record Management Services facility can transparently add a terminator to each line when it is retrieved by an application. The records themselves could contain the same line terminator characters, which could either be considered a feature or a nuisance depending on the application.
• Fixed line length was used by some early mainframe operating systems. In such a system, an implicit end-of-line was assumed every 80 characters, for example. No newline character was stored. If a file was imported from the outside world, lines shorter than the line length had to be padded with spaces, while lines longer than the line length had to be truncated. This mimicked the use of punched cards, on which each line was stored on a separate card, usually with 80 columns on each card. Many of these systems added an carriage control character to the start of the next record, this could indicate if the next record was a continuation of the line started by the previous record, or a new line, or should overprint the previous line (similar to a CR). Often this was a normal printing character such as '#' that thus could not be used as the first character in a line. Some early line printers interpreted these characters directly in the records sent to them.

Most textual Internet protocols (including HTTP, SMTP, FTP, IRC and many others) mandate the use of ASCII CR+LF (0x0D 0x0A) on the protocol level, but recommend that tolerant applications recognize lone LF as well. In practice, there are many applications that erroneously use the C newline character '\n' instead (see section Newline in programming languages below). This leads to problems when trying to communicate with systems adhering to a stricter interpretation of the standards; one such system is the qmail MTA that actively refuses to accept messages from systems that send bare LF instead of the required CR+LF.^[2]

FTP has a feature to transform newlines between CR+LF and LF only when transferring text files. This must not be used on binary files. Usually binary files and text files are recognised by checking their filename extension.

Unicode[link]

The Unicode standard defines a large number of characters that conforming applications should recognize as line terminators:^[3]

 LF:    Line Feed, U+000A
 VT:    Vertical Tab, U+000B
 FF:    Form Feed, U+000C
 CR:    Carriage Return, U+000D
 CR+LF: CR (U+000D) followed by LF (U+000A)
 NEL:   Next Line, U+0085
 LS:    Line Separator, U+2028
 PS:    Paragraph Separator, U+2029

This may seem overly complicated compared to an approach such as converting all line terminators to a single character, for example LF. However, Unicode was designed to preserve all information when converting a text file from any existing encoding to Unicode and back. Therefore, Unicode should contain characters included in existing encodings. NEL is included in ISO-8859-1^{[citation needed]} and EBCDIC (0x15). The approach taken in the Unicode standard allows round-trip transformation to be information-preserving while still enabling applications to recognize all possible types of line terminators.

Recognizing and using the newline codes greater than 0x7F is not often done. They are multiple bytes in UTF-8 and the code for NEL has been used as the ellipsis ('…') character in Windows-1252. For instance:

• YAML^[4] no longer recognizes them as special in order to be compatible with JSON.
• ECMAScript^[5] accepts LS and PS as line breaks, but considers U+0085 (NEL) white space, not a line break.
• Microsoft Windows 2000 does not treat any of NEL, LS or PS as line-break in the default text editor Notepad
• In Linux, a popular editor "gedit" treats LS and PS as newlines but does not for NEL.

History[link]

ASCII was developed simultaneously by the ISO and the ASA, the predecessor organization to ANSI. During the period of 1963–1968, the ISO draft standards supported the use of either CR+LF or LF alone as a newline, while the ASA drafts supported only CR+LF.

The sequence CR+LF was in common use on many early computer systems that had adopted Teletype machines, typically a Teletype Model 33 ASR, as a console device, because this sequence was required to position those printers at the start of a new line. On these systems, text was often routinely composed to be compatible with these printers, since the concept of device drivers hiding such hardware details from the application was not yet well developed; applications had to talk directly to the Teletype machine and follow its conventions.

Most minicomputer systems from DEC used this convention. CP/M used it as well, to print on the same terminals that minicomputers used. From there MS-DOS (1981) adopted CP/M's CR+LF in order to be compatible, and this convention was inherited by Microsoft's later Windows operating system.

The separation of the two functions concealed the fact that the print head could not return from the far right to the beginning of the next line in one-character time. That is why the sequence was always sent with the CR first. In fact, it was often necessary to send extra characters (extraneous CRs or NULs, which are ignored) to give the print head time to move to the left margin. Even many early video displays required multiple character times to scroll the display.

The Multics operating system began development in 1964 and used LF alone as its newline. Multics used a device driver to translate this character to whatever sequence a printer needed (including extra padding characters), and the single byte was much more convenient for programming. The seemingly more obvious choice of CR was not used, as a plain CR provided the useful function of overprinting one line with another, and thus it was useful to not translate it. Unix followed the Multics practice, and later systems followed Unix.

In programming languages[link]

To facilitate the creation of portable programs, programming languages provide some abstractions to deal with the different types of newline sequences used in different environments.

The C programming language provides the escape sequences '\n' (newline) and '\r' (carriage return). However, these are not required to be equivalent to the ASCII LF and CR control characters. The C standard only guarantees two things:

1. Each of these escape sequences maps to a unique implementation-defined number that can be stored in a single char value.
2. When writing a file in text mode, '\n' is transparently translated to the native newline sequence used by the system, which may be longer than one character. When reading in text mode, the native newline sequence is translated back to '\n'. In binary mode, no translation is performed, and the internal representation produced by '\n' is output directly.

On Unix platforms, where C originated, the native newline sequence is ASCII LF (0x0A), so '\n' was simply defined to be that value. With the internal and external representation being identical, the translation performed in text mode is a no-op, and text mode and binary mode behave the same. This has caused many programmers who developed their software on Unix systems simply to ignore the distinction completely, resulting in code that is not portable to different platforms.

The C library function fgets() is best avoided in binary mode because any file not written with the UNIX newline convention will be misread. Also, in text mode, any file not written with the system's native newline sequence (such as a file created on a UNIX system, then copied to a Windows system) will be misread as well.

Another common problem is the use of '\n' when communicating using an Internet protocol that mandates the use of ASCII CR+LF for ending lines. Writing '\n' to a text mode stream works correctly on Windows systems, but produces only LF on Unix, and something completely different on more exotic systems. Using "\r\n" in binary mode is slightly better.

Many languages, such as C++, Perl,^[6] and Haskell provide the same interpretation of '\n' as C.

Java, PHP,^[7] and Python^[8] provide the '\r\n' sequence (for ASCII CR+LF). In contrast to C, these are guaranteed to represent the values U+000A and U+000D, respectively.

The Java I/O libraries do not transparently translate these into platform-dependent newline sequences on input or output. Instead, they provide functions for writing a full line that automatically add the native newline sequence, and functions for reading lines that accept any of CR, LF, or CR+LF as a line terminator (see BufferedReader.readLine()). The System.getProperty() method can be used to retrieve the underlying line separator.

Example:

  String eol = System.getProperty( "line.separator" );
  String lineColor = "Color: Red" + eol;

Python permits "Universal Newline Support" when opening a file for reading, when importing modules, and when executing a file.^[9]

Some languages have created special variables, constants, and subroutines to facilitate newlines during program execution.

Common problems[link]

The different newline conventions often cause text files that have been transferred between systems of different types to be displayed incorrectly. For example, files originating on Unix or Apple Macintosh systems may appear as a single long line on some Windows programs. Conversely, when viewing a file originating from a Windows computer on a Unix system, the extra CR may be displayed as ^M at the end of each line or as a second line break.

The problem can be hard to spot if some programs handle the foreign newlines properly while others do not. For example, a compiler may fail with obscure syntax errors even though the source file looks correct when displayed on the console or in an editor. On a Unix system, the command cat -v myfile.txt will send the file to stdout (normally the terminal) and make the ^M visible, which can be useful for debugging. Modern text editors generally recognize all flavours of CR / LF newlines and allow the user to convert between the different standards. Web browsers are usually also capable of displaying text files and websites which use different types of newlines.

The File Transfer Protocol can automatically convert newlines in files being transferred between systems with different newline representations when the transfer is done in "ASCII mode". However, transferring binary files in this mode usually has disastrous results: Any occurrence of the newline byte sequence—which does not have line terminator semantics in this context, but is just part of a normal sequence of bytes—will be translated to whatever newline representation the other system uses, effectively corrupting the file. FTP clients often employ some heuristics (for example, inspection of filename extensions) to automatically select either binary or ASCII mode, but in the end it is up to the user to make sure his or her files are transferred in the correct mode. If there is any doubt as to the correct mode, binary mode should be used, as then no files will be altered by FTP, though they may display incorrectly.

Conversion utilities[link]

This article contains instructions, advice, or how-to content. The purpose of Wikipedia is to present facts, not to train. Please help improve this article either by rewriting the how-to content or by moving it to Wikiversity or Wikibooks. (June 2010)

Text editors are often used for converting a text file between different newline formats; most modern editors can read and write files using at least the different ASCII CR/LF conventions. The standard Windows editor Notepad is not one of them (although Wordpad and the MS-DOS Editor are).

Editors are often unsuitable for converting larger files. For larger files (on Windows NT/2000/XP) the following command is often used:

TYPE unix_file | FIND "" /V > dos_file

On many Unix systems, the dos2unix (sometimes named fromdos or d2u) and unix2dos (sometimes named todos or u2d) utilities are used to translate between ASCII CR+LF (DOS/Windows) and LF (Unix) newlines. Different versions of these commands vary slightly in their syntax. However, the tr command is available on virtually every Unix-like system and is used to perform arbitrary replacement operations on single characters. A DOS/Windows text file can be converted to Unix format by simply removing all ASCII CR characters with

tr -d '\r' < inputfile > outputfile

or, if the text has only CR newlines, by converting all CR newlines to LF with

tr '\r' '\n' < inputfile > outputfile

The same tasks are sometimes performed with awk, sed, Tr_(Unix) or in Perl if the platform has a Perl interpreter:

awk '{sub("$","\r\n"); printf("%s",$0);}' inputfile > outputfile  # UNIX to DOS  (adding CRs on Linux and BSD based OS that haven't GNU extensions)
awk '{gsub("\r",""); print;}' inputfile > outputfile              # DOS to UNIX  (removing CRs on Linux and BSD based OS that haven't GNU extensions)
sed -e 's/$/\r/' inputfile > outputfile              # UNIX to DOS  (adding CRs on Linux based OS that use GNU extensions)
sed -e 's/\r$//' inputfile > outputfile              # DOS  to UNIX (removing CRs on Linux based OS that use GNU extensions)
cat inputfile | tr -d "\r" > outputfile              # DOS  to UNIX (removing CRs using tr(1). Not Unicode compliant.)
perl -pe 's/\r?\n|\r/\r\n/g' inputfile > outputfile  # Convert to DOS
perl -pe 's/\r?\n|\r/\n/g'   inputfile > outputfile  # Convert to UNIX
perl -pe 's/\r?\n|\r/\r/g'   inputfile > outputfile  # Convert to old Mac

To identify what type of line breaks a text file contains, the file command can be used. Moreover, the editor Vim can be convenient to make a file compatible with the Windows notepad text editor. For example:

[prompt] > file myfile.txt
myfile.txt: ASCII English text
[prompt] > vim myfile.txt
  within vim :set fileformat=dos
             :wq
[prompt] > file myfile.txt
myfile.txt: ASCII English text, with CRLF line terminators

The following grep commands echo the filename (in this case myfile.txt) to the command line if the file is of the specified style:

grep -PL $'\r\n' myfile.txt # show UNIX style file (LF terminated)
grep -Pl $'\r\n' myfile.txt # show DOS style file (CRLF terminated)

For Debian-based systems, these commands are used:

egrep -L $'\r\n' myfile.txt # show UNIX style file (LF terminated)
egrep -l $'\r\n' myfile.txt # show DOS style file (CRLF terminated)

The above grep commands work under Unix systems or in Cygwin under Windows. Note that these commands make some assumptions about the kinds of files that exist on the system (specifically it's assuming only UNIX and DOS-style files—no Mac OS 9-style files).

This technique is often combined with find to list files recursively. For instance, the following command checks all "regular files" (e.g. it will exclude directories, symbolic links, etc.) to find all UNIX-style files in a directory tree, starting from the current directory (.), and saves the results in file unix_files.txt, overwriting it if the file already exists:

find . -type f -exec grep -PL '\r\n' {} \; > unix_files.txt

This example will find C files and convert them to LF style line endings:

find -name '*.[ch]' -exec fromdos {} \;

The file command also detects the type of EOL used:

file myfile.txt
> myfile.txt: ASCII text, with CRLF line terminators

Other tools permit the user to visualise the EOL characters:

od -a myfile.txt
cat -e myfile.txt
hexdump -c myfile.txt

dos2unix, unix2dos, mac2unix, unix2mac, mac2dos, dos2mac can perform conversions. The flip^[10] command is often used.

See also[link]

• ASA carriage control characters
• C0 and C1 control codes
• Page break
• Line starve

References[link]

External links[link]

• The Unicode reference, see paragraph 5.8 in Chapter 5 of the Unicode 4.0 standard (PDF)
• "The End-of-Line Story"
• The [NEL] Newline Character
• The End of Line Puzzle
• Tofrodos - software for Unix that converts to and from DOS newlines
• ToFroWin: a Windows shell extension that is able to convert multiple files from DOS to UNIX (and vice-versa) line endings right from the context menu.
• "Understanding Newlines" on O'Reilly-Net - an article by Xavier Noria.

Paul Wesley
Paul Wesley in July 2011.
Born	(1982-07-23) July 23, 1982 (age 29) New Brunswick, New Jersey, U.S.
Occupation	Actor
Years active	1999–present
Spouse	Torrey DeVitto (2011–present)

Paul Wesley (Paweł Wasilewski, July 23, 1982) is an American actor best known for his roles as Stefan Salvatore in The CW TV series The Vampire Diaries and as Aaron Corbett in the ABC Family miniseries Fallen.

Early life[link]

Wesley was born in New Brunswick, New Jersey to Polish parents Agnieszka and Thomas Wasilewski, and grew up in Marlboro Township, New Jersey. He has one older sister, Monika, and two younger sisters, Julia and Leah.^[1] In addition to English, he also knows Polish, having spent four months every year in Poland until the age of 16.^[2]

Wesley attended Christian Brothers Academy in Lincroft, New Jersey and Marlboro High School for a period during his high school years. During his junior year in high school, Wesley was cast in the soap opera Guiding Light as character Max Nickerson. He transferred from Marlboro High School to Lakewood Prep School in Howell, New Jersey because the school was able to accommodate his acting schedule.^[1][3][4] He graduated from there in 2000 and then started college at Rutgers University in New Jersey but left after one semester with his parents' support when more roles were offered to him, and he realized he could make a career out of acting.^[1][5]!

Career[link]

Paul Wesley, Nina Dobrev & Ian Somerhalder.

In 2005, he began to credit himself as Paul Wesley. When asked why he changed his professional name to Paul Wesley, he replied, "My birthname is too hard to pronounce! I asked my family's permission to change it, and it really helped my career."^[6]

He has had a number of roles on shows such as 24, 8 Simple Rules, American Dreams, Army Wives, Cane, Everwood, Guiding Light, Smallville, The O.C. and Wolf Lake. He also starred opposite Amber Tamblyn in CBS' The Russell Girl and had the lead role in Fallen miniseries. He was listed "Sexiest & Hottest Men of 2011" in the Glamour Magazine UK.

He also had a minor role in Roll Bounce starring Bow Wow's. Wesley is currently starring as vampire Stefan Salvatore in The Vampire Diaries which premiered September 2009 on The CW. In the series, he plays a younger brother to Damon Salvatore (played by Ian Somerhalder) as well as the love interest of a mortal 17 year old girl named Elena Gilbert (played by Nina Dobrev). His wife, Torrey Devitto, currently works alongside him in The Vampire Diaries as the Doctor of Mystic Falls. In May 2011, he joined the cast of The Baytown Disco.^[7]

Personal life[link]

Wesley and DeVitto in 2008.

Wesley met and began dating actress Torrey DeVitto in 2007 when they acted together in Killer Movie. They married in a private ceremony in New York City in April 2011.^[8]

He enjoys playing ice hockey and snowboarding.^[9][10] Wesley has also expressed an interest in directing and writing.^[11]

Filmography[link]

Awards[link]

References[link]

External links[link]

• Paul Wesley at the Internet Movie Database

Wikimedia Commons has media related to: Paul Wesley