- published: 26 May 2012
- views: 175243
- author: ToniEllison
2:37

Resin Tutorial
I decided to do a bit of an experiment with resin. I added things that I never tried befor...
published: 26 May 2012
author: ToniEllison
Resin Tutorial
I decided to do a bit of an experiment with resin. I added things that I never tried before, and here are the results. BUBBLES: If you mix your resin well and slow for about 3 minutes, then let it sit for about 3 minutes you shouldn't have very many bubbles at all. In fact, none of the pieces I made had bubbles...YAY! Usually I almost always have a few bubbles here and there, but I was patient this time and it paid off. If you want to make them into pendants you can simply glue a bail to the back, or add an eye-pin to the charm as soon as you pop it out of the mold. MOLD: Hobby Lobby FOR DETAILED INSTRUCTIONS: www.toniellison.com FACEBOOK: ________________ www.facebook.com TWITTER: __________________ twitter.com TUMBLR:___________________ toniellison.tumblr.com GOOGLE + plus.google.com MUSIC:______________________ Jenny Mayhem "When You're Older" resin tutorial jewelry jewellery dried flowers candy skittles peppermint sprinkles acrylic paint glitter
- published: 26 May 2012
- views: 175243
- author: ToniEllison
8:13

Using Ice Resin, Molds and Color Dyes to Make Jewelry
www.beadaholique.com - Beadohlique's Julie shows us how to use Jeweler's Grade crystal cle...
published: 07 Apr 2011
author: Beadaholique
Using Ice Resin, Molds and Color Dyes to Make Jewelry
www.beadaholique.com - Beadohlique's Julie shows us how to use Jeweler's Grade crystal clear Ice Resin, Resin Molds, Casting Epoxy Resin Color Pigment Dye, and some findings to make jewelry. Mastering 2-Part Resin - Tips and Advice www.beadersblog.com How to Embed an Eye Pin Bail Into a Resin Mold www.beadaholique.com Designer: Julie Bean Projects & Inspiration www.beadaholique.com The Red Queen Necklace, Earring, and Ring Set Project S604 www.beadaholique.com 'Chocolate' Hearts Magnet Set Project C607 www.beadaholique.com Wicked Earrings Project E628 www.beadaholique.com You can find the supplies in this video at Beadaholique.com: Resins and Glazes » Resins www.beadaholique.com ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit SKU: TRC-10 www.beadaholique.com CASTIN CRAFT Casting Epoxy Resin Transparent Green Pigment Dye SKU: TRC-89 www.beadaholique.com CASTIN CRAFT Casting Epoxy Resin Opaque Red Pigment Dye SKU: TRC-85 www.beadaholique.com Casting Epoxy Resin Mixing Cup Set With Brushes and Sticks SKU: TRC-01 www.beadaholique.com Casting Epoxy Resin Mold Release And Conditioner SKU: TRC-04 www.beadaholique.com Resin Casting Supplies » Molds www.beadaholique.com Resin Epoxy Mold For Jewelry Casting - 4 Dual Heart In Heart SKU: TRC-183 www.beadaholique.com Resin Epoxy Mold For Jewelry Casting - 6 Round Cabochons 3/4 Inch SKU: TRC-179 www.beadaholique.com Resin Epoxy Mold For Jewelry Casting - 6 Rectangles 3/4 x 1 1/4 Inch SKU: TRC-159 www.beadaholique.com ...
- published: 07 Apr 2011
- views: 193826
- author: Beadaholique
16:02

My Complete Resin Tutorial Pt. 1 of 2
My Christmahanakwanzika gift to you guys :D Times of different scenes: 00:35 Brand of resi...
published: 25 Dec 2011
author: nic0lekA
My Complete Resin Tutorial Pt. 1 of 2
My Christmahanakwanzika gift to you guys :D Times of different scenes: 00:35 Brand of resin I use, bottles 01:05 Supplies for mixing 01:32 Pouring resin to mix 02:45 Mixing the resin 04:00 What the resin should look like when its completely mixed 04:06 Prep-ing my mold 04:34 Pouring resin into blue, flexible, rubber, daisy mold 04:53 Putting SPRINKLES in resin :) 05:57 Putting STICKERS in resin (more detailed video?) 06:39 Prep-ing a candy mold 07:02 Mixing GLITTER & MICROMARBLES into resin 08:07 Mixing POWDERS & SCENTS into resin 09:58 Pouring resin into thin, flexible, plastic, bow mold 10:30 Pouring resin into flexible Amazing Mold Putty, Playboy Bunny mold 10:46 Gettin' rid of those bubbles! 10:58 Mixing COLORANTS into resin 12:16 Prep-ing my candy mold before pouring resin into it 12:25 Pouring resin into non-flexible, plastic, candy, witch finger mold 12:42 Putting a layer of resin (w/ stuff mixed in) behind stickers 13:02 Adding a layer of glitter behind stickers (NOT mixing it into resin) 14:20 Random layer of black resin with glitter :) & getting air bubbles away from the sides of the daisy mold 14:39 Popping out the pieces from the blue daisy mold 15:07 Popping out the Playboy Bunny 15:26 Popping out the bow Watch Part 2 for more :D I get my molds from Michaels, Joanns, Walmart, Target, Etsy, & Younkinsm. Same place for my stickers. Where you can find the bow mold if they're not sold out + a lot of other cool ones! www.etsy.com Blog: www.nic0lekA.blogspot.com ...
- published: 25 Dec 2011
- views: 127465
- author: nic0lekA
7:19

Cast embedments in Clear Resin
This video segment will show you how to cast embedments in clear polyester resin...
published: 06 Nov 2006
author: tapplastics
Cast embedments in Clear Resin
This video segment will show you how to cast embedments in clear polyester resin
- published: 06 Nov 2006
- views: 270549
- author: tapplastics
6:10

Resin Tutorial (Great gift idea!)
For more resin tips, ideas and inspiration; check out TattooedCookie! www.youtube.com For ...
published: 10 Dec 2011
author: PaperPastels
Resin Tutorial (Great gift idea!)
For more resin tips, ideas and inspiration; check out TattooedCookie! www.youtube.com For resin molds check out: www.youtube.com NEW GAMING CHANNEL: www.youtube.com TWITTER: www.twitter.com FACEBOOK: www.facebook.com INSTAGRAM: PaperPastels WEBSITE: www.helloashleyann.com ONLINE STORE: www.paperpastels.com MY CHANNELS VLOG: www.youtube.com BEAUTY: www.youtube.com CRAFTS: www.youtube.com GAMING: www.youtube.com ヾ(^∇^) Send me mail, charms, or anything else! Ashley Ruiz PO Box 772681 Orlando, FL 32877 For business inquiries: helloashleyann@gmail.com
- published: 10 Dec 2011
- views: 988857
- author: PaperPastels
4:16

Resin Metal Charms
Metal Charm Kits: www.paperpastels.com Metal Charms: www.paperpastels.com NEW GAMING CHANN...
published: 15 Jan 2013
author: PaperPastels
Resin Metal Charms
Metal Charm Kits: www.paperpastels.com Metal Charms: www.paperpastels.com NEW GAMING CHANNEL: www.youtube.com TWITTER: www.twitter.com FACEBOOK: www.facebook.com INSTAGRAM: PaperPastels WEBSITE: www.helloashleyann.com ONLINE STORE: www.paperpastels.com MY CHANNELS VLOG: www.youtube.com BEAUTY: www.youtube.com CRAFTS: www.youtube.com GAMING: www.youtube.com ヾ(^∇^) Send me mail, charms, or anything else! Ashley Ruiz PO Box 772681 Orlando, FL 32877 For business inquiries: helloashleyann@gmail.com
- published: 15 Jan 2013
- views: 30619
- author: PaperPastels
8:48

Complete Resin Tutorial
Resin FAQ. 1) Q:What brand of resin do you use? A: FamoWood 2) Q: Where can you buy resin?...
published: 17 Sep 2012
author: MyPetiteCakes
Complete Resin Tutorial
Resin FAQ. 1) Q:What brand of resin do you use? A: FamoWood 2) Q: Where can you buy resin? A: EasyCast = Michaels // Famowood = Lowes 3) Q:What resin brand do you recommend? A: Famowood, you get more resin for the same price as EasyCast. 4) Q: Where do you get your molds? A: www.youtube.com resinobsession.com 5) Q: Where do you get your stickers? A: I get them from a local japanese/ San x Store but you can find some from here: shopkawaii.com 6) Q: How can i prevent getting air bubbles? A: i get a ton of air bubbles but you can use a lighter to get rid of them, or just simply breathe onto the resin 7) Q: Is Resin Dangerous? A: Yes, it irritates your skin (thus the gloves) and you want to work with it in a well- ventilated area.
- published: 17 Sep 2012
- views: 40012
- author: MyPetiteCakes
9:14

Resin Jewelry Tutorial with John W. Golden Part 1
A how-to video for using epoxy resin, silver-plated rings and pewter pendant trays to crea...
published: 18 May 2008
author: pixelnoggin
Resin Jewelry Tutorial with John W. Golden Part 1
A how-to video for using epoxy resin, silver-plated rings and pewter pendant trays to create jewelry from reproductions of your artwork. Part 1 of 3. See John's rings, pendants and artist's reproductions at johnwgolden.etsy.com. Want the ring blanks and pendants john uses? Check out www.goldensupplyco.com or http
- published: 18 May 2008
- views: 417892
- author: pixelnoggin
5:44

How To Make Resin Tabletop Part 1
This part one video segment will show you how to create your own custom resin table tops...
published: 30 Nov 2009
author: tapplastics
How To Make Resin Tabletop Part 1
This part one video segment will show you how to create your own custom resin table tops
- published: 30 Nov 2009
- views: 109914
- author: tapplastics
11:20

How to Make Bottle Cap Jewelry Using Resin
www.beadaholique.com - Learn how to use 2-part resin to make beautiful bottle cap jewelry....
published: 19 Aug 2011
author: Beadaholique
How to Make Bottle Cap Jewelry Using Resin
www.beadaholique.com - Learn how to use 2-part resin to make beautiful bottle cap jewelry. From magnets to pendants and earrings, this video shows you how to mix and pour the resin and also covers instructions on how to punch a hole in the bottle cap so that you can attach a jump ring bail or earring finding. This video also shows how to finish the jewelry by attaching a magnet or using ball chain. Mastering 2-Part Resin - Tips and Advice www.beadersblog.com Designer: Julie Bean Halloween Magnet Project C614 www.beadaholique.com You can find the supplies in this video at Beadaholique.com: New Orange Crown Bottle Caps For Crafts SKU: PND-2029 www.beadaholique.com ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit SKU: TRC-10 www.beadaholique.com Nunn Design Permanent Sealant Protectant 2 OZ SKU: XTL-1032 www.beadaholique.com Jeweller's Micro-Flame Butane Torch SKU: XTL-0300 www.beadaholique.com Eurotool EuroPunch 1.25mm Round Hole Punch Pliers SKU: XTL-0060 www.beadaholique.com Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose SKU: XTL-5450 www.beadaholique.com Xuron Jeweler's Super Fine Pliers Round Nose Pliers SKU: XTL-5488 www.beadaholique.com E6000 Industrial Strength Glue Adhesive SKU: XTL-1051 www.beadaholique.com Craft and Hobby Ceramic Disk Disc Magnets 1/2 Inch Diameter SKU: XTL-9101 www.beadaholique.com Jump Rings & Split Rings » Open Jump Rings www.beadaholique.com CHAIN www.beadaholique.com Nunn Design Permanent Glue Adhesive 2 OZ SKU: XTL-1031 ...
- published: 19 Aug 2011
- views: 56094
- author: Beadaholique
6:27

Resin Jewelry Tutorial with John W. Golden Part 3
A how-to video for using epoxy resin, silver-plated rings and pewter pendant trays to crea...
published: 18 May 2008
author: pixelnoggin
Resin Jewelry Tutorial with John W. Golden Part 3
A how-to video for using epoxy resin, silver-plated rings and pewter pendant trays to create jewelry from reproductions of your artwork. Part 3 of 3. See John's rings, pendants and artist's reproductions at johnwgolden.etsy.com. Want the ring blanks and pendants john uses? Check out www.johnwgolden.com
- published: 18 May 2008
- views: 133554
- author: pixelnoggin
14:57

How To Do Perfect Vacuum Resin Infusion of a Carbon Fibre (Fiber) Part - Basic Tutorial
Video guide to accompany our www.easycomposites.co.uk - This practical guide explains exac...
published: 19 Dec 2010
author: easycompositestv
How To Do Perfect Vacuum Resin Infusion of a Carbon Fibre (Fiber) Part - Basic Tutorial
Video guide to accompany our www.easycomposites.co.uk - This practical guide explains exactly how to use the Resin Infusion technique to make a strong and light carbon fiber part with a perfect, pin-hole free, surface finish. Follow the video step-by-step, including never shared before professional techniques and you too can master this technique.
- published: 19 Dec 2010
- views: 177822
- author: easycompositestv
11:25

Mold Making and Casting: Cold Casting resin with metal powders
This is another approach to cold casting. We dusted a 71-20 silicone mold with metal powde...
published: 10 Nov 2011
author: brickintheyard
Mold Making and Casting: Cold Casting resin with metal powders
This is another approach to cold casting. We dusted a 71-20 silicone mold with metal powders and then we cast EZ Flo resin behind to create a realitic, metalic cast. Just a little bit of polishing with 0000 steel wool reveals a beautiful metal finish on the resin surface.
- published: 10 Nov 2011
- views: 96706
- author: brickintheyard
14:48

How To Make A Senko Worm Resin Mold
How to make a Fiberglass resin Senko worm mold for fishin'. Start to finish with 6 slots f...
published: 20 Aug 2010
author: Mike OD
How To Make A Senko Worm Resin Mold
How to make a Fiberglass resin Senko worm mold for fishin'. Start to finish with 6 slots for pouring melted down senko worms or any old soft plastic lure you don't use anymore.
- published: 20 Aug 2010
- views: 43236
- author: Mike OD
Youtube results:
9:43

Resin Jewelry Tutorial
Hey guys this is a tutorial showing you how to make cute kawaii resin charms. This video w...
published: 04 Jan 2011
author: funkypinkgal
Resin Jewelry Tutorial
Hey guys this is a tutorial showing you how to make cute kawaii resin charms. This video will teach you all the basics of resin making! Please rate, comment, and subscribe!
- published: 04 Jan 2011
- views: 56999
- author: funkypinkgal
13:44

Resin eye (fursuit eye) Casting Tutorial
This is a Tutorial for casting Resin Eyes, used for creatting fallowme eyes, flat eyes, ev...
published: 25 Jun 2011
author: FurryEcho
Resin eye (fursuit eye) Casting Tutorial
This is a Tutorial for casting Resin Eyes, used for creatting fallowme eyes, flat eyes, even led eyes, usally for fursuit heads. Castin'craft Clear liquid Plastic Casting Resin was used in this tutorial. mixing ratio: 10 drops of catalyst for every ounce of casting resin. Use outside, or in a well ventalated area. cure somewhere hot for about 3-4 hours. (ouside works well) You can also use Amazing casting resin (clear) hardener may be yellow, this is normal. it will harden to a clear resin eye, or have just a small yellow tint, when painted this is not noticable. (cure time is 24-72 hours) Even if it is clear, the eye is not ment for visability, you can not see through it properly. Just a warning.
- published: 25 Jun 2011
- views: 102864
- author: FurryEcho
5:25

Vacuum Resin Infusion Process: Fabricating a Composite Car Seat
www.smooth-on.com for more information about vacuum bagging. The aftermarket auto parts in...
published: 21 Apr 2011
author: SmoothOnInc
Vacuum Resin Infusion Process: Fabricating a Composite Car Seat
www.smooth-on.com for more information about vacuum bagging. The aftermarket auto parts industry has grown significantly over the past decade. Increased competition and short lead times have created a demand for faster production methods and techniques. Implementing Smooth-On's vacuum...
- published: 21 Apr 2011
- views: 38733
- author: SmoothOnInc
4:02

Mold Making and Resin Casting Your Own Sculpted Miniatures - Part 8
Part 8 of a Video Series that details how to make Rubber Molds and Resin Casts of your own...
published: 04 Aug 2009
author: XanderXereus
Mold Making and Resin Casting Your Own Sculpted Miniatures - Part 8
Part 8 of a Video Series that details how to make Rubber Molds and Resin Casts of your own 28mm Miniatures. The casting kits used is Smooth-On's Mold Making and Casting Pourable Starter Kit. Smooth-On's Website: www.smooth-on.com (Also check out their great Mold and Cast videos!) Apparently on Amazon.com as well: www.amazon.com
- published: 04 Aug 2009
- views: 63515
- author: XanderXereus