Mount Fuji, from the Thirty-six Views of Mount Fuji, color woodcut by Katsushika Hokusai

Printmaking is the process of making artworks by printing, normally on paper. Printmaking normally covers only the process of creating prints with an element of originality, rather than just being a photographic reproduction of a painting. Except in the case of monotyping, the process is capable of producing multiples of the same piece, which is called a 'print'. Each piece produced is not a copy but considered an original since it is not a reproduction of another work of art and is technically (more correctly) known as an 'impression'. Printmaking (other than monotyping) is not chosen only for its ability to produce multiple copies, but rather for the unique qualities that each of the printmaking processes lends itself to.

Prints are created by transferring ink from a matrix or through a prepared screen to a sheet of paper or other material. Common types of matrices include: metal plates, usually copper or zinc, or polymer plates for engraving or etching; stone, aluminum, or polymer for lithography; blocks of wood for woodcuts and wood engravings; and linoleum for linocuts. Screens made of silk or synthetic fabrics are used for the screenprinting process. Other types of matrix substrates and related processes are discussed below.

Multiple impressions printed from the same matrix form an edition. Since the late 19th century, artists have generally signed individual impressions from an edition and often number the impressions to form a limited edition. Prints may also be printed in book form, such as illustrated books or artist's books.

Techniques[link]

Overview[link]

Printmaking techniques are generally divided into the following basic categories:

• Relief, where ink is applied to the original surface of the matrix. Relief techniques include: woodcut or woodblock as the Asian forms are usually known, wood engraving, linocut and metalcut;
• Intaglio, where ink is applied beneath the original surface of the matrix. Intaglio techniques include: engraving, etching, mezzotint, aquatint
• Planographic, where the matrix retains its original surface, but is specially prepared and/or inked to allow for the transfer of the image. Planographic techniques include: lithography, monotyping, and digital techniques.
• Stencil, where ink or paint is pressed through a prepared screen, including: screenprinting and pochoir

Other types of printmaking techniques outside these groups include collagraphy, viscosity printing, and foil imaging. Collagraphy is a printmaking technique in which textured material is adhered to the printing matrix. This texture is transferred to the paper during the printing process. Contemporary printmaking may include digital printing, photographic mediums, or a combination of digital, photographic, and traditional processes.

Many of these techniques can also be combined, especially within the same family. For example Rembrandt's prints are usually referred to as "etchings" for convenience, but very often include work in engraving and drypoint as well, and sometimes have no etching at all.

Woodcut[link]

Ernst Ludwig Kirchner, Portrait of Otto Müller, 1915

Woodcut, a type of relief print, is the earliest printmaking technique, and the only one traditionally used in the Far East. It was probably first developed as a means of printing patterns on cloth, and by the 5th century was used in China for printing text and images on paper. Woodcuts of images on paper developed around 1400 in Europe, and slightly later in Japan. These are the two areas where woodcut has been most extensively used purely as a process for making images without text.

The artist draws a design on a plank of wood, or on paper which is transferred to the wood. Traditionally the artist then handed the work to a specialist cutter, who then uses sharp tools to carve away the parts of the block that will not receive ink. The surface of the block is then inked with the use of a brayer, and then a sheet of paper, perhaps slightly damp, is placed over the block. The block is then rubbed with a baren or spoon, or is run through a printing press. If in color, separate blocks can be used for each color,or a technique called reduction printing can be used.

Reduction printing is a name used to describe the process of using one block to print several layers of color on one print. This usually involves cutting a small amount of the block away, and then printing the block many times over on different sheets before washing the block, cutting more away and printing the next color on top. This allows the previous color to show through. This process can be repeated many times over. The advantages of this process is that only one block is needed, and that different components of an intricate design will line up perfectly. The disadvantage is that once the artist moves on to the next layer, no more prints can be made.

Another variation of woodcut printmaking is the cukil technique, made famous by the Taring Padi underground community in Java, Indonesia. Taring Padi Posters usually resemble intricately printed cartoon posters embedded with political messages. Images—usually resembling a visually complex scenario—are carved unto a wooden surface called cukilan, then smothered with printer's ink before pressing it unto media such as paper or canvas.

Engraving[link]

"Melencolia I", engraving by Albrecht Dürer, one of the most important printmakers.

The process was developed in Germany in the 1430s from the engraving used by goldsmiths to decorate metalwork. Engravers use a hardened steel tool called a burin to cut the design into the surface of a metal plate, traditionally made of copper. Engraving using a burin is generally a difficult skill to learn.

Gravers come in a variety of shapes and sizes that yield different line types. The burin produces a unique and recognizable quality of line that is characterized by its steady, deliberate appearance and clean edges. Other tools such as mezzotint rockers, roulets and burnishers are used for texturing effects.

To make a print, the engraved plate is inked all over, then the ink is wiped off the surface, leaving only ink in the engraved lines. The plate is then put through a high-pressure printing press together with a sheet of paper (often moistened to soften it). The paper picks up the ink from the engraved lines, making a print. The process can be repeated many times; typically several hundred impressions (copies) could be printed before the printing plate shows much sign of wear, except when drypoint, which gives much shallower lines, is used.

In the 20th century, true engraving was revived as a serious art form by artists including Stanley William Hayter whose Studio 17 in Paris became the magnet for such artists as the Japanese master Shoïchi Hasegawa.

Etching[link]

"The sleep of Reason creates monsters", etching and aquatint by Francisco Goya

Etching is part of the intaglio family (along with engraving, drypoint, mezzotint, and aquatint.) The process is believed to have been invented by Daniel Hopfer (circa 1470-1536) of Augsburg, Germany, who decorated armour in this way, and applied the method to printmaking. Etching soon came to challenge engraving as the most popular printmaking medium. Its great advantage was that, unlike engraving which requires special skill in metalworking, etching is relatively easy to learn for an artist trained in drawing.

The Three Crosses, etching by Rembrandt

Etching prints are generally linear and often contain fine detail and contours. Lines can vary from smooth to sketchy. An etching is opposite of a woodcut in that the raised portions of an etching remain blank while the crevices hold ink. In pure etching, a metal (usually copper, zinc or steel) plate is covered with a waxy or acrylic ground. The artist then draws through the ground with a pointed etching needle. The exposed metal lines are then etched by dipping the plate in a bath of etchant (e.g. nitric acid or ferric chloride). The etchant "bites" into the exposed metal, leaving behind lines in the plate. The remaining ground is then cleaned off the plate, and the printing process is then just the same as for engraving.

Artists using this technique include Albrecht Dürer, Rembrandt, Francisco Goya, Whistler, Otto Dix, James Ensor, Edward Hopper, Käthe Kollwitz, Pablo Picasso, Cy Twombly, Lucas van Leyden, Carlos Alvarado Lang.

Mezzotint[link]

An intaglio variant of engraving in which the image is formed from subtle gradations of light and shade. Mezzotint—from the Italian mezzo ("half") and tinta ("tone")--is a "dark manner" form of printmaking, which requires artists to work from dark to light. To create a mezzotint, the surface of a copper printing plate is roughened evenly all over with the aid of a tool known as a rocker; the image is then formed by smoothing the surface with a tool known as a burnisher. When inked, the roughened areas of the plate will hold more ink and print more darkly, while smoother areas of the plate hold less or no ink, and will print more lightly or not at all. It is, however, possible to create the image by only roughening the plate selectively, so working from light to dark.

Mezzotint is known for the luxurious quality of its tones: first, because an evenly, finely roughened surface holds a lot of ink, allowing deep solid colors to be printed; secondly because the process of smoothing the texture with burin, burnisher and scraper allows fine gradations in tone to be developed.

The mezzotint printmaking method was invented by Ludwig von Siegen (1609–1680). The process was used widely in England from the mid-eighteenth century, to reproduce oil paintings and portraits.

Aquatint[link]

A technique used in Intaglio etchings. Like etching, aquatint technique involves the application of acid to make marks in a metal plate. Where the etching technique uses a needle to make lines that retain ink, aquatint relies on powdered rosin which is acid resistant in the ground to create a tonal effect. The rosin is applied in a light dusting by a fan booth, the rosin is then cooked until set on the plate. At this time the rosin can be burnished or scratched out to affect its tonal qualities. The tonal variation is controlled by the level of acid exposure over large areas, and thus the image is shaped by large sections at a time.

Goya used aquatint for most of his prints.

Drypoint[link]

A variant of engraving, done with a sharp point, rather than a v-shaped burin. While engraved lines are very smooth and hard-edged, drypoint scratching leaves a rough burr at the edges of each line. This burr gives drypoint prints a characteristically soft, and sometimes blurry, line quality. Because the pressure of printing quickly destroys the burr, drypoint is useful only for very small editions; as few as ten or twenty impressions. To counter this, and allow for longer print runs, electro-plating (here called steelfacing) has been used since the nineteenth century to harden the surface of a plate.

The technique appears to have been invented by the Housebook Master, a south German fifteenth century artist, all of whose prints are in drypoint only. Among the most famous artists of the old master print: Albrecht Dürer produced 3 drypoints before abandoning the technique; Rembrandt used it frequently, but usually in conjunction with etching and engraving.

Lithography[link]

La Goulue, Lithograph poster by Toulouse-Lautrec.

Lithography is a technique invented in 1798 by Alois Senefelder and based on the chemical repulsion of oil and water. A porous surface, normally limestone, is used; the image is drawn on the limestone with a greasy medium. Acid is applied, transferring the grease to the limestone, leaving the image 'burned' into the surface. Gum arabic, a water soluble substance, is then applied, sealing the surface of the stone not covered with the drawing medium. The stone is wetted, with water staying only on the surface not covered in grease-based residue of the drawing; the stone is then 'rolled up', meaning oil ink is applied with a roller covering the entire surface; since water repels the oil in the ink, the ink adheres only to the greasy parts, perfectly inking the image. A sheet of dry paper is placed on the surface, and the image is transferred to the paper by the pressure of the printing press. Lithography is known for its ability to capture fine gradations in shading and very small detail.

A variant is photo-lithography, in which the image is captured by photographic processes on metal plates; printing is carried out in the same way.

Screenprinting[link]

Screenprinting (occasionally known as "silkscreen", or "serigraphy") creates prints by using a fabric stencil technique; ink is simply pushed through the stencil against the surface of the paper, most often with the aid of a squeegee. Generally, the technique uses a natural or synthetic 'mesh' fabric stretched tightly across a rectangular 'frame,' much like a stretched canvas. The fabric can be silk, nylon monofilament, multifilament polyester, or even stainless steel ([1]). While commercial screenprinting often requires high-tech, mechanical apparatuses and calibrated materials, printmakers value it for the "Do It Yourself" approach, and the low technical requirements, high quality results. The essential tools required are a squeegee, a mesh fabric, a frame, and a stencil. Unlike many other printmaking processes, a printing press is not required, as screenprinting is essentially stencil printing.

Screenprinting may be adapted to printing on a variety of materials, from paper, cloth, and canvas to rubber, glass, and metal. Artists have used the technique to print on bottles, on slabs of granite, directly onto walls, and to reproduce images on textiles which would distort under pressure from printing presses.

Monotype[link]

Monotyping is a type of printmaking made by drawing or painting on a smooth, non-absorbent surface. The surface, or matrix, was historically a copper etching plate, but in contemporary work it can vary from zinc or glass to acrylic glass. The image is then transferred onto a sheet of paper by pressing the two together, usually using a printing-press. Monotypes can also be created by inking an entire surface and then, using brushes or rags, removing ink to create a subtractive image, e.g. creating lights from a field of opaque color. The inks used may be oil based or water based. With oil based inks, the paper may be dry, in which case the image has more contrast, or the paper may be damp, in which case the image has a 10 percent greater range of tones.

Unlike monoprinting, monotyping produces a unique print, or monotype, because most of the ink is removed during the initial pressing. Although subsequent reprintings are sometimes possible, they differ greatly from the first print and are generally considered inferior. A second print from the original plate is called a "ghost print" or "cognate". Stencils, watercolor, solvents, brushes, and other tools are often used to embellish a monotype print. Monotypes are often spontaneously executed and with no preliminary sketch.

Monotypes are the most painterly method among the printmaking techniques, a unique print that is essentially a printed painting. The principal characteristic of this medium is found in its spontaneity and its combination of printmaking, painting, and drawing media.^[1]

Monoprint[link]

Monoprinting is a form of printmaking that uses a matrix such as a woodblock, litho stone, or copper plate, but produces impressions that are unique. Multiple unique impressions printed from a single matrix are sometimes known as a variable edition. There are many techniques used in monoprinting, including collagraph, collage, hand-painted additions, and a form of tracing by which thick ink is laid down on a table, paper is placed on the ink, and the back of the paper is drawn on, transferring the ink to the paper. Monoprints can also be made by altering the type, color, and viscosity of the ink used to create different prints. Traditional printmaking techniques, such as lithography, woodcut, and intaglio, can be used to make monoprints.

Digital prints[link]

Digital prints refers to images printed using a digital printer instead of a traditional printing press. These images can be printed to a variety of substrates including paper, cloth, or plastic canvas. Accurate color reproduction and the type of ink used (see below) are key to distinguishing high quality from low quality digital prints. Metallics (silvers, golds) are particularly difficult to reproduce accurately because they reflect light back to digital scanners. High quality digital prints typically are reproduced with very high-resolution data files with very high-precision printers. The substrate used has an effect on the final colors and cannot be ignored when selecting a color palette.

Pigment-based vs. dye-based inks[link]

Unlike pigment, dyes dissolve when mixed into a liquid. Dyes are organic (not mineral). Although most are synthetic, derived from petroleum, they can be made from vegetable or animal sources. Dyes are well suited for textiles where the liquid dye penetrates and chemically bonds to the fiber. Because of the deep penetration, more layers of material must lose their color before the fading is apparent. Dyes, however, are not suitable for the relatively thin layers of ink laid out on the surface of a print.

Pigment is a finely ground, particulate substance which, when mixed or ground into a liquid to make ink or paint, does not dissolve, but remains dispersed or suspended in the liquid. Pigments are categorized as either inorganic (mineral) or organic (synthetic).^[2]

A pigment, such as red iron oxide (rust) is simply an oxidized form of iron. One could leave iron, lead, or gold in the sun for a million years and they would never change color or change into another substance.^{[dubious – discuss]} In contrast, man-made synthetic and vegetable water-soluble dyes can fade rapidly, often within one to six months.

"Giclée" prints[link]

The term Giclée, derived from the French and meaning "to spurt", is sometimes used in the commercial fine art print community to describe the ink-jet printing processes listed above. It was originally associated with Iris printing process. Today fine art prints produced on ink-jet machines using the CcMmYK color model are generally called "Giclée".

Foil imaging[link]

In art, foil imaging is a printmaking technique made using the Iowa Foil Printer, developed by Virginia A. Myers from the commercial foil stamping process. This uses gold leaf and acrylic foil in the printmaking process.

Color[link]

Printmakers apply color to their prints in many different ways. Often color in printmaking that involves etching, screenprinting, woodcut, or linocut is applied by either using separate plates, blocks or screens or by using a reductionist approach. In multiple plate color techniques, a number of plates, screens or blocks are produced, each providing a different color. Each separate plate, screen, or block will be inked up in a different color and applied in a particular sequence to produce the entire picture. On average about 3 to 4 plates are produced, but there are occasions where a printmaker may use up to seven plates. Every application of another plate of color will interact with the color already applied to the paper, and this must be kept in mind when producing the separation of colors. The lightest colors are often applied first, and then darker colors successively until the darkest.

The reductionist approach to producing color is to start with a lino or wood block that is either blank or with a simple etching. Upon each printing of color the printmaker will then further cut into the lino or woodblock removing more material and then apply another color and reprint. Each successive removal of lino or wood from the block will expose the already printed color to the viewer of the print. Picasso is often cited as the inventor of reduction printmaking, although there is evidence of this method in use 25 years before Picasso's linocuts.^[3]

The subtractive color concept is also used in offset or digital print and is present in bitmap or vectorial software in CMYK or other color spaces.

Registration[link]

In printmaking processes requiring more than one application of ink or other medium, the problem exists as to how to line up properly areas of an image to receive ink in each application. The most obvious example of this would be a multi-color image in which each color is applied in a separate step. The lining up of the results of each step in a multistep printmaking process is called "registration." Proper registration results in the various components of an image being in their proper place. But, for artistic reasons, improper registration is not necessarily the ruination of an image.

This can vary considerably from process to process. It generally involves placing the substrate, generally paper, in correct alignment with the printmaking element that will be supplying it with coloration.^[4]

Protective printmaking equipment[link]

Protective clothing is very important for printmakers who engage in etching and lithography (closed toed shoes and long pants). In the past, many printmakers did not live far past 35 to 40 years of age^{[citation needed]} because of their exposure to various acids, solvents, particles, and vapors inherent in the printmaking process.

Whereas in the past printmakers put their plates in and out of acid baths with their bare hands, today printmakers use rubber gloves. They also wear industrial respirators for protection from caustic vapors. Most acid baths are built with ventilation hoods above them.

Often, an emergency cold shower or eye wash station is nearby in case of acid spillages, as well as soda ash- which neutralizes most acids. Some printmakers wear goggles when dealing with acid.

Protective respirators and masks should have particle filters, particularly for aquatinting. As a part of the aquatinting process, a printmaker is often exposed to rosin powder. Rosin is a serious health hazard, especially to printmakers who, in the past, simply used to hold their breath^{[citation needed]} using an aquatinting booth.

Barrier cream is often used upon a printmaker's hands both when putting them inside the protective gloves and if using their hands to wipe plates (wipe ink into the grooves of the plate and remove excess).

Sterile plasters and bandages should always be available to treat cuts and scrapes. For example, zinc plates can be extremely sharp when their edges are not beveled.

Gallery[link]

• 

  Hiroshige, The Plum Garden in Kameido, woodcut, 1857
  right: Van Gogh, Flowering Plum Tree, oil on canvas, homage to Hiroshige

• 

  Hiroshige, Great Bridge, Sudden Shower at Atake woodcut, c.1857
  right: Van Gogh, The Bridge in the Rain, oil on canvas, homage to Hiroshige

• 

  Felix Vallotton, La raison probante (The Cogent Reason), woodcut from the series Intimités, 1898

• 

  Rembrandt van Rijn, Self-portrait, etching, c.1630

• 

  Rembrandt van Rijn, Christ Preaching, (The Hundred Guilder print); etching c.1648

• 

  Francisco Goya, There is No One To Help Them, Disasters of War series, aquatint c.1810

• 

  Carlos Alvarado Lang, Fallen tree, engraving

See also[link]

Wikimedia Commons has media related to: printmaking

• Artist's proof
• Banhua, Chinese printmaking
• Carborundum printmaking
• Edition
• Graphic design
• Line engraving
• Old master print
• Shin hanga
• Sosaku hanga
• Ukiyo-e
• Viscosity printing
• List of Printmakers

Printmakers by nationality[link]

• Engravers by nationality
• Etchers by nationality
• Printmakers by nationality

Notes[link]

References[link]

• What is a Print?, from the Museum of Modern Art
• Bamber Gascoigne: How to Identify Prints: A Complete Guide to Manual and Mechanical Processes from Woodcut to Inkjet (ISBN 0-500-28480-6)
• Multi-Color Block Prints: Wood/Linoleum - Reduction Method Technique, by Hannah Tompkins

Further reading[link]

• Beth Grabowski and Bill Fick, "Printmaking: A Complete Guide to Materials & Processes." Prentice Hall, 2009. ISBN 0-205-66453-9
• Donna Anderson Experience Printmaking. Worcester, MA: Davis Publications, 2009. ISBN 978-0-87192-982-2
• Gill Saunders and Rosie Miles Prints Now: Directions and Definitions Victoria and Albert Museum (May 1, 2006) ISBN 1-85177-480-7
• Antony Griffiths, Prints and Printmaking, British Museum Press, 2nd ed, 1996 ISBN 0-7141-2608-X
• Linda Hults The Print in the Western World: An Introductory History. Madison: University of Wisconsin Press, 1996. ISBN 978-0-299-13700-7
• William Ivins, Jr. Prints and Visual Communication. Cambridge: Harvard University Press, 1953. ISBN 0-262-59002-6
• James Watrous A Century of American Printmaking. Madison: University of Wisconsin Press, 1984. ISBN 0-299-09680-7
• Carol Wax, The Mezzotint: History and Technique (Harry N. Abrams, Inc., 1990)

External links[link]

Look up printmaking in Wiktionary, the free dictionary.

History of printmaking; glossaries

• Museum of Modern Art, New York: What Is a Print?
• Thompson, Wendy. "The Printed Image in the West: History and Techniques". In Timeline of Art History. New York: The Metropolitan Museum of Art, 2000 – . (October 2003)
• André Béguin's dictionary;enormous dictionary of terms, relating more to the printing than the creation of the image
• Another glossary - for modern prints
• Large list of links to museum etc. online images of prints
• Judging the Authenticity of Prints by The Masters by art historian David Rudd Cycleback
• Relief printing techniques as used and described by French printmaker Dominique Lecomte

Printmaking organizations

• Print Council of America
• International Fine Print Dealers Association
• SGC International (formerly Southern Graphics Council)
• Seattle Print Arts
• Bellebyrd - The Print Australia blogspot by art historian Josephine Severn.
• Iowa Biennial - Exhibition & Archive of Contemporary Prints
• Site dedicated to the activity of printmaking and thinking creatively. Includes footage of well-known artists working at Crown Point Press in San Francisco.
• Prints and Printmaking: Site devoted to Australian and Pacific printmaking practice and history
• Mini Print International of Cadaques Site of the longest running international print exhibition and competition, catalogues, archive, winners, exhibitions, jury...
• Mid America Print Council

This biographical article needs additional citations for verification. Please help by adding reliable sources. Contentious material about living persons that is unsourced or poorly sourced must be removed immediately, especially if potentially libelous or harmful. (May 2010)

The Basics
The Basics at the Oxford Art Factory, 2010
Background information
Origin	Melbourne, Australia
Genres	Rock
Years active	2002–present
Labels	Independent, Albert Records
Associated acts	Gotye, Down Hills Home, Dog With Wheels, Blood Red Bird
Website	The Basics Official Website
Members
Wally De Backer Kris Schroeder Tim Heath
Past members
Michael Hubbard
Notable instruments
Lead guitar, drums, bass guitar.

The Basics ( /ˈbæzɪtʃ/ BAZZ-ich) are a three-piece band from Melbourne, Australia, formed by Wally De Backer and Kris Schroeder in 2002. Their style has been described as anything from 'indie-pop' to 'rock'n'roll' to 'pop-rock', though their records show they span a wide range of genres, including reggae, ska, country, and electro-pop. They are "recognised as one of Australia's hardest-working bands".^[1]

With close to 1000 shows in their ten-year career, their live performances are well-known for their sense of humour and energy.^[2]

Formation[link]

The Basics were formed after Kris met Wally at a party in Melbourne.^[3] The event was to see off the young aspiring producer, who was about to depart for Los Angeles, and together with a number of musician friends, the two jammed on some blues-rock standards. Later that night, they bonded over a mutual love of The Beatles, 70s and 80s cartoon theme songs and old Sierra adventure games.

Initially, they played around Melbourne as an acoustic guitar/drums combo, starting at The Opposition in Frankston and the House of Fools in Footscray, where in late 2002 they met Michael Hubbard and later invited him to join them on electric guitar.^[4] Though lacking any real experience with the instrument, Kris willingly purchased his first bass guitar, and the trio was born. During this time, the group start performing songs with more complicated three-part harmony.

During late 2002 and early 2003, The Basics recorded and released an album called Get Back through MGM Distribution. They began what was to become regular tours of the East and West coasts of Australia.

2004-2005: Current lineup[link]

Tim Heath joined the group in June 2004, after Michael decided to pursue his solo career, which has included being one half of Down Hills Home.^[4] Tim was reportedly the only person to reply to an advertisement in Melbourne's Beat Magazine looking for a new guitarist. Tim apparently answered the advertisement - which said the applicant "must have a love of 50s and 60s rock'n'roll" - thinking that he would be meeting "a couple of old guys to play with on the weekends over some beers". They soon recorded For Girls Like You.

The Basics in 2005 continued to tour and play small festivals, and after releasing For Girls Like You through MGM Distribution, they departed for a national tour of Australia, which lasted for two months and took them to every Australian state and territory. Stuart Padbury, a young Melbourne sound engineer, joined them on much of this tour. On returning, the band began demonstrating songs for a new album.

2006-2009: Touring and soundtracks[link]

In 2006, The Basics began recording what was to become known as Stand Out/Fit In. Taking several months, it was not completed until the end of the year, despite intentions to have it released in June. Instead, they held a successful 'album preview', where each of the tracks was demonstrated in 'rough form' accompanied by a music video for each (produced by Melbourne photographic artist James Bryans). The band also talked about the origins of the songs. This event brought a lot of attention to the band for the idea's originality. They pre-released a radio single 'Just Hold On' from the album. The band were invited to play the hugely popular Homebake Festival in Sydney, where they received a great response, after being introduced onto the stage by a short stocky Asian guy with big calves ("one of the highlights" wrote The Daily Telegraph).

In 2007, the band departed on a tri-state residency which saw them play Melbourne, Sydney and Brisbane every week for the month of April - a bold move which brought further attention to the band for its original idea.^[5] Riding on the wave of this tour, Schroeder, De Backer and Heath departed on their first overseas tour which saw them performing 26 shows around Japan, Norway and the United Kingdom.^[6] They also toured twice more up the East Coast, one of which was with popular Japanese band The Bawdies. Their song 'Rattle My Chain' was used in a series of commercials for Volvo Australia. The song 'Hey There!' featured in the British film The Bank Job - starring Jason Statham - and was used as the backing for a February 2007 short film directed by Tim Longhurst called The Rip. Their song 'Better' was featured in a surfing documentary about the invention of the shortboard in 1967.

In 2008, the band appeared on Australia's Channel 9 for Australia Day celebrations, performing two of their songs - 'Just Hold On' and 'Hey There!' - to an estimated audience of 2 million. Securing an Australian Government grant, they embarked on a two-month tour of Australia, specifically targeting "culturally underprivileged groups" in rural and regional schoolchildren and Indigenous communities. The programme had them holding masterclasses and performing alongside Indigenous groups in the remote Northern Territory and Queensland.^[7][8] Their initiative also had them raising money for the charity Lifeline^{[disambiguation needed ]}, their contribution to which was recognised with a plaque at the end of the tour. Season two of Californication starring David Duchovny featured their cover of the classic 'Have Love, Will Travel', most famously covered by 'The Sonics'.

In 2009, The Basics for the first time enjoyed the support of Australian radio network Triple J, which had reportedly snubbed the band's previous material.^[9] The singles 'With This Ship' and 'Like A Brother' were added to the station's playlist, and momentum carried The Basics overseas for a second tour of the United Kingdom and Norway, and also a series of shows in Dublin, Ireland. They were joined by the longtime front-of-house engineer Stuart Padbury, who had been mixing them since 2005. The band was often seen in the Grafton Street Mall in Dublin, busking to promote their concerts there. Their second show in Oslo, Norway, saw the band perform with Hot Tub, one of the members of the Norwegian boy band "Boyzvoice", in his first performance for several years. Season Eight of Scrubs featured the song 'Lookin' Over My Shoulder'.

Despite all this promise, the band's album Keep Your Friends Close - produced and part-recorded by Peter Cobbin at London's Abbey Road Studios - though enjoying many favourable reviews,^{[10][11][12][13]} failed to impress Richard Kingsmill, music director of Triple J. This effectively ended the band's apparent upward spiral and the resulting album launch tour was reportedly "trying".

2010: Hiatus and live album[link]

In 2010, following the band's fourth stint at the Tamworth Country Music Festival, and the recording of a yet-unreleased live album, an indefinite hiatus was announced on the band's websites. This was in part due to the impending release of a new album produced by Wally for his Gotye project, and also to reported tensions within the band following the previous year's disappointments.

However, this hiatus was soon broken with a two-month residency at the Northcote Social Club in Melbourne, which saw an apparent return to form.^[14] The band's EP "Wait For You" enjoys airplay on Triple J.^[15] The Basics also played a one-off show at Sydney's Oxford Art Factory.^[16]

On 20 August 2010, The Basics released their fourth LP /ðəˈbæzɪtʃ/, available free and exclusively from their website for digital download^[17]. The band had reportedly moved to expand their listenership through this free giveaway, though 300 "Deluxe" CD/vinyl versions have been printed. /ðəˈbæzɪtʃ/ was recorded at the Northcote Social Club on 6 February, "in front of a live studio audience", and like the previous record, was mixed by Peter Cobbin at Abbey Road Studios. Technically a self-titled album, the phonetics spell out the accurate pronunciation of the band’s name. Kris Schroeder: "For years we’ve worked at bringing our live energy into the studio and thus far it’s been a bit hit-and-miss. Our trick this time was to pull a switcheroo and bring the studio to us instead; the result is the best and closest to us we’ve sounded yet."

Melbourne thespian and Dog With Wheels bassist David Bramble - friends with Heath from university days - has occasionally joined the band on tour, playing keys, often while sporting a large moustache. Other guests have included Jake Mason (saxophone), also of Cookin' on 3 Burners and The Bamboos^{[disambiguation needed ]}, Gideon Brazil (saxophone, flute), Simon Imrei (guitar and vocals) and Monty MacKenzie (saxophone).

Covers have often made an appearance from various sources: to date, some of the bands covered have been Cream, The Kinks, The Rolling Stones, The Police, Neil Young, Bob Dylan, New Kids on the Block, Richard Berry, Sonny Curtis and The Crickets, JJ Cale, Harry Nilsson, Bill Scott, Ryan Adams and The Coasters (via The Beatles for their cover of Three Cool Cats).

Members[link]

Current

• Wally De Backer - drums, vocals (2002-present)
• Kris Schroeder - bass, vocals (2002-present)
• Tim Heath - guitar, vocals (2004-present)

Former

• Michael Hubbard - guitar, vocals (2002-2004)

Discography[link]

Albums[link]

• Get Back (15 January 2004)
• Stand Out/Fit In (5 May 2007)
• Keep Your Friends Close (25 September 2009)
• /ðəˈbæzɪtʃ/ (20 August 2010)

EP[link]

• For Girls Like You (11 July 2005)
• Lookin' Over My Shoulder (10 February 2007)
• Like A Brother (5 June 2009)
• Wait For You (21 May 2010)

Singles[link]

• Call It Rhythm & Blues (20 August 2004)
• Just Hold On
• With This Ship (22 February 2009)

Upcoming projects[link]

The band is taking a three year hiatus, with an announced return to the stage together in early 2014. Wally De Backer launched Making Mirrors under his Gotye act in August 2011, Tim Heath will be touring and recording with Blood Red Bird, and Kris Schroeder recorded a solo EP titled, Patience in the Face of Control, before leaving Australia to work with the Red Cross in Kenya for a two year sabbatical.

References[link]

External links[link]

• Official Website
• Myspace Website