Recycling is processing used materials (waste) into new products to prevent waste of potentially useful materials, reduce the consumption of fresh raw materials, reduce energy usage, reduce air pollution (from incineration) and water pollution (from landfilling) by reducing the need for "conventional" waste disposal, and lower greenhouse gas emissions as compared to virgin production.[1][2] Recycling is a key component of modern waste reduction and is the third component of the "Reduce, Reuse, Recycle" waste hierarchy.
There are some ISO standards relating to recycling such as ISO 15270:2008 for plastics waste and ISO 14001:2004 for environmental management control of recycling practice.
Recyclable materials include many kinds of glass, paper, metal, plastic, textiles, and electronics. Although similar in effect, the composting or other reuse of biodegradable waste – such as food or garden waste – is not typically considered recycling.[2] Materials to be recycled are either brought to a collection center or picked up from the curbside, then sorted, cleaned, and reprocessed into new materials bound for manufacturing.
In the strictest sense, recycling of a material would produce a fresh supply of the same material—for example, used office paper would be converted into new office paper, or used foamed polystyrene into new polystyrene. However, this is often difficult or too expensive (compared with producing the same product from raw materials or other sources), so "recycling" of many products or materials involves their reuse in producing different materials (e.g., paperboard) instead. Another form of recycling is the salvage of certain materials from complex products, either due to their intrinsic value (e.g., lead from car batteries, or gold from computer components), or due to their hazardous nature (e.g., removal and reuse of mercury from various items). Critics dispute the net economic and environmental benefits of recycling over its costs, and suggest that proponents of recycling often make matters worse and suffer from confirmation bias. Specifically, critics argue that the costs and energy used in collection and transportation detract from (and outweigh) the costs and energy saved in the production process; also that the jobs produced by the recycling industry can be a poor trade for the jobs lost in logging, mining, and other industries associated with virgin production; and that materials such as paper pulp can only be recycled a few times before material degradation prevents further recycling. Proponents of recycling dispute each of these claims, and the validity of arguments from both sides has led to enduring controversy.
Recycling has been a common practice for most of human history, with recorded advocates as far back as Plato in 400 BC. During periods when resources were scarce, archaeological studies of ancient waste dumps show less household waste (such as ash, broken tools and pottery)—implying more waste was being recycled in the absence of new material.[3]
An American poster from World War II.
In pre-industrial times, there is evidence of scrap bronze and other metals being collected in Europe and melted down for perpetual reuse.[4] In Britain dust and ash from wood and coal fires was collected by 'dustmen' and downcycled as a base material used in brick making. The main driver for these types of recycling was the economic advantage of obtaining recycled feedstock instead of acquiring virgin material, as well as a lack of public waste removal in ever more densely populated areas.[3] In 1813, Benjamin Law developed the process of turning rags into 'shoddy' and 'mungo' wool in Batley, Yorkshire. This material combined recycled fibres with virgin wool. The West Yorkshire shoddy industry in towns such as Batley and Dewsbury, lasted from the early 19th century to at least 1914.
Industrialization spurred demand for affordable materials; aside from rags, ferrous scrap metals were coveted as they were cheaper to acquire than was virgin ore. Railroads both purchased and sold scrap metal in the 19th century, and the growing steel and automobile industries purchased scrap in the early 20th century. Many secondary goods were collected, processed, and sold by peddlers who combed dumps, city streets, and went door to door looking for discarded machinery, pots, pans, and other sources of metal. By World War I, thousands of such peddlers roamed the streets of American cities, taking advantage of market forces to recycle post-consumer materials back into industrial production.[5]
Resource shortages caused by the world wars, and other such world-changing occurrences greatly encouraged recycling.[6] Massive government promotion campaigns were carried out in World War II in every country involved in the war, urging citizens to donate metals and conserve fibre, as a matter of significant patriotic importance. For example in 1939, Britain launched the programme Paper Salvage to encourage the recycling of materials to aid the war effort. Resource conservation programs established during the war were continued in some countries without an abundance of natural resources, such as Japan, after the war ended.
The next big investment in recycling occurred in the 1970s, due to rising energy costs. Recycling aluminium uses only 5% of the energy required by virgin production; glass, paper and metals have less dramatic but very significant energy savings when recycled feedstock is used.[7]
For a recycling program to work, having a large, stable supply of recyclable material is crucial. Three legislative options have been used to create such a supply: mandatory recycling collection, container deposit legislation, and refuse bans. Mandatory collection laws set recycling targets for cities to aim for, usually in the form that a certain percentage of a material must be diverted from the city's waste stream by a target date. The city is then responsible for working to meet this target.[2]
Container deposit legislation involves offering a refund for the return of certain containers, typically glass, plastic, and metal. When a product in such a container is purchased, a small surcharge is added to the price. This surcharge can be reclaimed by the consumer if the container is returned to a collection point. These programs have been very successful, often resulting in an 80 percent recycling rate. Despite such good results, the shift in collection costs from local government to industry and consumers has created strong opposition to the creation of such programs in some areas.[2]
A third method of increase supply of recyclates is to ban the disposal of certain materials as waste, often including used oil, old batteries, tires and garden waste. One aim of this method is to create a viable economy for proper disposal of banned products. Care must be taken that enough of these recycling services exist, or such bans simply lead to increased illegal dumping.[2]
Legislation has also been used to increase and maintain a demand for recycled materials. Four methods of such legislation exist: minimum recycled content mandates, utilization rates, procurement policies, recycled product labeling.[2]
Both minimum recycled content mandates and utilization rates increase demand directly by forcing manufacturers to include recycling in their operations. Content mandates specify that a certain percentage of a new product must consist of recycled material. Utilization rates are a more flexible option: industries are permitted to meet the recycling targets at any point of their operation or even contract recycling out in exchange for [trade]able credits. Opponents to both of these methods point to the large increase in reporting requirements they impose, and claim that they rob industry of necessary flexibility.[2][8]
Governments have used their own purchasing power to increase recycling demand through what are called "procurement policies." These policies are either "set-asides," which earmark a certain amount of spending solely towards recycled products, or "price preference" programs which provide a larger budget when recycled items are purchased. Additional regulations can target specific cases: in the United States, for example, the Environmental Protection Agency mandates the purchase of oil, paper, tires and building insulation from recycled or re-refined sources whenever possible.[2]
The final government regulation towards increased demand is recycled product labeling. When producers are required to label their packaging with amount of recycled material in the product (including the packaging), consumers are better able to make educated choices. Consumers with sufficient buying power can then choose more environmentally conscious options, prompt producers to increase the amount of recycled material in their products, and indirectly increase demand. Standardized recycling labeling can also have a positive effect on supply of recyclates if the labeling includes information on how and where the product can be recycled.[2]
A number of different systems have been implemented to collect recyclates from the general waste stream. These systems lie along the spectrum of trade-off between public convenience and government ease and expense. The three main categories of collection are "drop-off centres", "buy-back centres" and "curbside collection".[2]
Drop off centres require the waste producer to carry the recyclates to a central location, either an installed or mobile collection station or the reprocessing plant itself. They are the easiest type of collection to establish, but suffer from low and unpredictable throughput.
Buy-back centres differ in that the cleaned recyclates are purchased, thus providing a clear incentive for use and creating a stable supply. The post-processed material can then be sold on, hopefully creating a profit. Unfortunately government subsidies are necessary to make buy-back centres a viable enterprise, as according to the United States National Solid Wastes Management Association it costs on average US$50 to process a ton of material, which can only be resold for US$30.[2]
Curbside collection encompasses many subtly different systems, which differ mostly on where in the process the recyclates are sorted and cleaned. The main categories are mixed waste collection, commingled recyclables and source separation.[2] A waste collection vehicle generally picks up the waste.
At one end of the spectrum is mixed waste collection, in which all recyclates are collected mixed in with the rest of the waste, and the desired material is then sorted out and cleaned at a central sorting facility. This results in a large amount of recyclable waste, paper especially, being too soiled to reprocess, but has advantages as well: the city need not pay for a separate collection of recyclates and no public education is needed. Any changes to which materials are recyclable is easy to accommodate as all sorting happens in a central location.[2]
In a Commingled or single-stream system, all recyclables for collection are mixed but kept separate from other waste. This greatly reduces the need for post-collection cleaning but does require public education on what materials are recyclable.[2][4]
Source separation is the other extreme, where each material is cleaned and sorted prior to collection. This method requires the least post-collection sorting and produces the purest recyclates, but incurs additional operating costs for collection of each separate material. An extensive public education program is also required, which must be successful if recyclate contamination is to be avoided.[2]
Source separation used to be the preferred method due to the high sorting costs incurred by commingled collection. Advances in sorting technology (see sorting below), however, have lowered this overhead substantially—many areas which had developed source separation programs have since switched to comingled collection.[4]
Early sorting of recyclable materials: glass and plastic bottles in
Poland.
Once commingled recyclates are collected and delivered to a central collection facility, the different types of materials must be sorted. This is done in a series of stages, many of which involve automated processes such that a truck-load of material can be fully sorted in less than an hour.[4] Some plants can now sort the materials automatically, known as single-stream recycling. A 30 percent increase in recycling rates has been seen in the areas where these plants exist.[9]
Initially, the commingled recyclates are removed from the collection vehicle and placed on a conveyor belt spread out in a single layer. Large pieces of corrugated fiberboard and plastic bags are removed by hand at this stage, as they can cause later machinery to jam.[4]
Next, automated machinery separates the recyclates by weight, splitting lighter paper and plastic from heavier glass and metal. Cardboard is removed from the mixed paper, and the most common types of plastic, PET (#1) and HDPE (#2), are collected. This separation is usually done by hand, but has become automated in some sorting centers: a spectroscopic scanner is used to differentiate between different types of paper and plastic based on the absorbed wavelengths, and subsequently divert each material into the proper collection channel.[4]
Strong magnets are used to separate out ferrous metals, such as iron, steel, and tin-plated steel cans ("tin cans"). Non-ferrous metals are ejected by magnetic eddy currents in which a rotating magnetic field induces an electric current around the aluminium cans, which in turn creates a magnetic eddy current inside the cans. This magnetic eddy current is repulsed by a large magnetic field, and the cans are ejected from the rest of the recyclate stream.[4]
Finally, glass must be sorted by hand based on its color: brown, amber, green or clear.[4]
Although many government programs are concentrated on recycling at home, a large portion of waste is generated by industry. The focus of many recycling programs done by industry is the cost-effectiveness of recycling. The ubiquitous nature of cardboard packaging makes cardboard a commonly recycled waste product by companies that deal heavily in packaged goods, like retail stores, warehouses, and distributors of goods. Other industries deal in niche or specialized products, depending on the nature of the waste materials that are present.
The glass, lumber, wood pulp, and paper manufacturers all deal directly in commonly recycled materials. However, old rubber tires may be collected and recycled by independent tire dealers for a profit.
Levels of metals recycling are generally low. In 2010, the International Resource Panel, hosted by the United Nations Environment Programme (UNEP) published reports on metal stocks that exist within society[10] and their recycling rates.[11] The Panel reported that the increase in the use of metals during the 20th and into the 21st century has led to a substantial shift in metal stocks from below ground to use in applications within society above ground. For example, the in-use stock of copper in the USA grew from 73 to 238 kg per capita between 1932 and 1999.
The report authors observed that, as metals are inherently recyclable, the metals stocks in society can serve as huge mines above ground. However, they found that the recycling rates of many metals are very low. The report warned that the recycling rates of some rare metals used in applications such as mobile phones, battery packs for hybrid cars and fuel cells, are so low that unless future end-of-life recycling rates are dramatically stepped up these critical metals will become unavailable for use in modern technology.
The military recycles some metals. The U.S. Navy's Ship Disposal Program uses ship breaking to reclaim the steel of old vessels. Ships may also be sunk to create an artificial reef. Uranium is a very dense metal that has qualities superior to lead and titanium for many military and industrial uses. The uranium left over from processing it into nuclear weapons and fuel for nuclear reactors is called depleted uranium, and it is used by all branches of the U.S. military use for armour-piercing shells and shielding.
The construction industry may recycle concrete and old road surface pavement, selling their waste materials for profit.
Some industries, like the renewable energy industry and solar photovoltaic technology in particular, are being proactive in setting up recycling policies even before there is considerable volume to their waste streams, anticipating future demand during their rapid growth.[12]
In order to meet recyclers' needs while providing manufacturers a consistent, uniform system, a coding system is developed. The recycling code for plastics was introduced in 1988 by plastics industry through the Society of the Plastics Industry, Inc.[13] Because municipal recycling programs traditionally have targeted packaging – primarily bottles and containers – the resin coding system offered a means of identifying the resin content of bottles and containers commonly found in the residential waste stream.[14]
Plastic products are printed with numbers 1-7 depending on the type of resin. Type 1 plastic, PET (or PETE): polyethylene terephthalate, is commonly found in soft drink and water bottles. Type 2, HDPE: high-density polyethylene is known as the milk jug plastic. Type 3, PVC or V (vinyl), includes items like window cleaner, shampoo, detergent, and cooking oil bottles, clear food packaging, wire jacketing, medical equipment, siding, windows, and piping. Type 4, called LDPE, or low-density polyethylene, is found in shopping bags, squeezable bottles, tote bags, clothing, furniture, and carpet. Type 5 is PP which stands for polypropylene and makes up syrup bottles and straws. Type 6 is PS: polystyrene and makes up meat trays, egg cartons, carryout containers, aspirin bottles, and compact disc cases. Type 7 includes all other plastics like bulletproof materials, three- and five-gallon water bottles, and sunglasses.[15] Types 1 and 2 are the most commonly recycled.
There is some debate over whether recycling is economically efficient. Municipalities often see fiscal benefits from implementing recycling programs, largely due to the reduced landfill costs.[18] A study conducted by the Technical University of Denmark found that in 83 percent of cases, recycling is the most efficient method to dispose of household waste.[4][7] However, a 2004 assessment by the Danish Environmental Assessment Institute concluded that incineration was the most effective method for disposing of drink containers, even aluminium ones.[19]
Fiscal efficiency is separate from economic efficiency. Economic analysis of recycling includes what economists call externalities, which are unpriced costs and benefits that accrue to individuals outside of private transactions. Examples include: decreased air pollution and greenhouse gases from incineration, reduced hazardous waste leaching from landfills, reduced energy consumption, and reduced waste and resource consumption, which leads to a reduction in environmentally damaging mining and timber activity. About 4000 minerals are known, of these only a few hundred minerals in the world are relatively common.[20] At current rates, current known reserves of phosphorus will be depleted in the next 50 to 100 years.[21][22] Without mechanisms such as taxes or subsidies to internalize externalities, businesses will ignore them despite the costs imposed on society. To make such non-fiscal benefits economically relevant, advocates have pushed for legislative action to increase the demand for recycled materials.[2] The United States Environmental Protection Agency (EPA) has concluded in favor of recycling, saying that recycling efforts reduced the country's carbon emissions by a net 49 million metric tonnes in 2005.[4] In the United Kingdom, the Waste and Resources Action Programme stated that Great Britain's recycling efforts reduce CO2 emissions by 10-15 million tonnes a year.[4] Recycling is more efficient in densely populated areas, as there are economies of scale involved.[2]
Certain requirements must be met for recycling to be economically feasible and environmentally effective. These include an adequate source of recyclates, a system to extract those recyclates from the waste stream, a nearby factory capable of reprocessing the recyclates, and a potential demand for the recycled products. These last two requirements are often overlooked—without both an industrial market for production using the collected materials and a consumer market for the manufactured goods, recycling is incomplete and in fact only "collection".[2]
Many[who?] economists favor a moderate level of government intervention to provide recycling services. Economists of this mindset probably view product disposal as an externality of production and subsequently argue government is most capable of alleviating such a dilemma. However, those of the laissez faire approach to municipal recycling see product disposal as a service that consumers value. A free-market approach is more likely to suit the preferences of consumers since profit-seeking businesses have greater incentive to produce a quality product or service than does government. Moreover, economists almost always advise against government intrusion in any market with little or no externalities.[23]
Computers being collected for recycling at a pick-up event in
Olympia, Washington, United States.
Certain countries trade in unprocessed recyclates. Some have complained that the ultimate fate of recyclates sold to another country is unknown and they may end up in landfills instead of reprocessed. According to one report, in America, 50–80 percent of computers destined for recycling are actually not recycled.[24][25] There are reports of illegal-waste imports to China being dismantled and recycled solely for monetary gain, without consideration for workers' health or environmental damage. Though the Chinese government has banned these practices, it has not been able to eradicate them.[26] In 2008, the prices of recyclable waste plummeted before rebounding in 2009. Cardboard averaged about £53/tonne from 2004–2008, dropped to £19/tonne, and then went up to £59/tonne in May 2009. PET plastic averaged about £156/tonne, dropped to £75/tonne and then moved up to £195/tonne in May 2009.[27] Certain regions have difficulty using or exporting as much of a material as they recycle. This problem is most prevalent with glass: both Britain and the U.S. import large quantities of wine bottled in green glass. Though much of this glass is sent to be recycled, outside the American Midwest there is not enough wine production to use all of the reprocessed material. The extra must be downcycled into building materials or re-inserted into the regular waste stream.[2][4]
Similarly, the northwestern United States has difficulty finding markets for recycled newspaper, given the large number of pulp mills in the region as well as the proximity to Asian markets. In other areas of the U.S., however, demand for used newsprint has seen wide fluctuation.[2]
In some U.S. states, a program called RecycleBank pays people to recycle, receiving money from local municipalities for the reduction in landfill space which must be purchased. It uses a single stream process in which all material is automatically sorted.[28]
Complete recycling is impossible from a practical standpoint. In summary, substitution and recycling strategies only delay the depletion of non-renewable stocks and therefore may buy time in the transition to true or strong sustainability, which ultimately is only guaranteed in an economy based on renewable resources[29]:21
An Italian
aluminium can recycling logo. The
USA,
UK and
Italy have several aluminium recycling schemes in operation.
A UK
LDPE plastic bottle recycling
logo. The UK openly encourages
plastic recycling schemes and has many under way already.
Much of the difficulty inherent in recycling comes from the fact that most products are not designed with recycling in mind. The concept of sustainable design aims to solve this problem, and was laid out in the book "Cradle to Cradle: Remaking the Way We Make Things" by architect William McDonough and chemist Michael Braungart. They suggest that every product (and all packaging they require) should have a complete "closed-loop" cycle mapped out for each component—a way in which every component will either return to the natural ecosystem through biodegradation or be recycled indefinitely.[4] In this context, while recycling does divert waste from entering directly into the environment, current recycling misses the dissipative components. Complete recycling is impracticable as highly dispersed wastes become so diluted that the energy needed for their recovery becomes increasingly excessive. "For example, how will it ever be possible to recycle the numerous chlorinated organic hydrocarbons that have bioaccumulated in animal and human tissues across the globe, the copper dispersed in fungicides, the lead in widely applied paints, or the zinc oxides present in the finely dispersed rubber powder that is abraded from automobile tires?"[29]:260 As with environmental economics, care must be taken to ensure a complete view of the costs and benefits involved. For example, paperboard packaging for food products is more easily recycled than most plastic, but is heavier to ship and may result in more waste from spoilage.[30]
The following are criticisms of many popular points used for recycling.
[edit] Energy
The amount of energy saved through recycling depends upon the material being recycled and the type of energy accounting that is used. Emergy (spelled with an M) analysis, for example, budgets for the amount of energy of one kind (exergy) that is required to make or transform things into another kind of product or service. Using emergy life-cycle analysis researchers have concluded that materials with large refining costs have the greatest potential for high recycle benefits. Moreover, the highest emergy efficiency accrues from systems geared toward material recycling, where materials are engineered to recycle back into their original form and purpose, followed by adaptive reuse systems where the materials are recycled into a different kind of product, and then by byproduct reuse systems where parts of the products are used to make an entirely different product. One emergy life-cycle analysis revealed that fly ash, aluminum, recycled concrete aggregate, recycled plastic and steel yield higher efficiency ratios, whereas the recycling of lumber generates the lowest recycle benefit ratio. Hence, the specific nature of the recycling process, the methods used to analyse the process, and the products involved effects the energy savings budgets.[31]
The Energy Information Administration (EIA) states on its website that "a paper mill uses 40 percent less energy to make paper from recycled paper than it does to make paper from fresh lumber."[32] Some critics argue that it takes more energy to produce recycled products than it does to dispose of them in traditional landfill methods, since the curbside collection of recyclables often requires a second waste truck. However, recycling proponents point out that a second timber or logging truck is eliminated when paper is collected for recycling, so the net energy consumption is the same.
It is difficult to determine the exact amount of energy consumed or produced in waste disposal processes. How much energy is used in recycling depends largely on the type of material being recycled and the process used to do so. Aluminium is generally agreed to use far less energy when recycled rather than being produced from scratch. The EPA states that "recycling aluminum cans, for example, saves 95 percent of the energy required to make the same amount of aluminum from its virgin source, bauxite."[33][34] In 2009 more than half of all aluminium cans produced came from recycled aluminium.[35]
Every year, millions of tons of materials are being exploited from the earth's crust, and processed into consumer and capital goods. After decades to centuries, most of these materials are "lost". With the exception of some pieces of art or religious relics, they are no longer engaged in the consumption process. Where are they? Recycling is only an intermediate solution for such materials, although it does prolong the residence time in the anthroposphere. For thermodynamic reasons, however, recycling cannot prevent the final need for an ultimate sink.[36]:1
Economist Steven Landsburg has suggested that the sole benefit of reducing landfill space is trumped by the energy needed and resulting pollution from the recycling process.[37] Others, however, have calculated through life cycle assessment that producing recycled paper uses less energy and water than harvesting, pulping, processing, and transporting virgin trees.[38] When less recycled paper is used, additional energy is needed to create and maintain farmed forests until these forests are as self-sustainable as virgin forests.
Other studies have shown that recycling in itself is inefficient to perform the “decoupling” of economic development from the depletion of non-renewable raw materials that is necessary for sustainable development.[39] The international transportation or recycle material flows through "...different trade networks of the three countries result in different flows, decay rates, and potential recycling returns."[40]:1 When global consumption of a natural resource grows by more than 1 percent per annum, its depletion is inevitable[citation needed], and the best recycling can do is to delay it by a number of years. Nevertheless, if this decoupling can be achieved by other means, so that consumption of the resource is reduced below 1 percent per annum, then recycling becomes indispensable—indeed recycling rates above 80 percent are required for a significant slowdown of the resource depletion.
The amount of money actually saved through recycling depends on the efficiency of the recycling program used to do it. The Institute for Local Self-Reliance argues that the cost of recycling depends on various factors around a community that recycles, such as landfill fees and the amount of disposal that the community recycles. It states that communities start to save money when they treat recycling as a replacement for their traditional waste system rather than an add-on to it and by "redesigning their collection schedules and/or trucks."[41]
In some cases, the cost of recyclable materials also exceeds the cost of raw materials. Virgin plastic resin costs 40 percent less than recycled resin.[42] Additionally, a United States Environmental Protection Agency (EPA) study that tracked the price of clear glass from July 15 to August 2, 1991, found that the average cost per ton ranged from $40 to $60,[43] while a USGS report shows that the cost per ton of raw silica sand from years 1993 to 1997 fell between $17.33 and $18.10.[44]
In a 1996 article for The New York Times, John Tierney argued that it costs more money to recycle the trash of New York City than it does to dispose of it in a landfill. Tierney argued that the recycling process employs people to do the additional waste disposal, sorting, inspecting, and many fees are often charged because the processing costs used to make the end product are often more than the profit from its sale.[45] Tierney also referenced a study conducted by the Solid Waste Association of North America (SWANA) that found in the six communities involved in the study, "all but one of the curbside recycling programs, and all the composting operations and waste-to-energy incinerators, increased the cost of waste disposal."[46]
Tierney also points out that "the prices paid for scrap materials are a measure of their environmental value as recyclables. Scrap aluminum fetches a high price because recycling it consumes so much less energy than manufacturing new aluminum."
However, comparing the market cost of recyclable material to the cost of new raw materials ignores economic externalities - the costs that are currently not counted by the market. Creating a new piece of plastic, for instance, may cause more pollution and be less sustainable than recycling a similar piece of plastic, but these factors will not be counted in market cost. A life cycle assessment can be used to determine the levels of externalities and decide whether the recycling may be worthwhile despite unfavorable market costs. Alternatively, legal means (such as a carbon tax) can be used to bring externalities into the market, so that the market cost of the material becomes close to the true cost.
In 2003, the city of Santa Clarita, California was paying $28 per ton to put garbage into a landfill. The city then adopted a mandatory diaper recycling program that cost $1,800 per ton.[47]
People who earn their living by collecting and sorting garbage and selling them for recycling, Brazil.
In a 2007 article, Michael Munger, the Chair of Political Science at Duke University, wrote, "... if recycling is more expensive than using new materials, it can't possibly be efficient... There is a simple test for determining whether something is a resource... or just garbage... If someone will pay you for the item, it's a resource... But if you have to pay someone to take the item away... then the item is garbage."[48]
In a 2002 article for The Heartland Institute, Jerry Taylor, director of natural resource studies at the Cato Institute, wrote, "If it costs X to deliver newly manufactured plastic to the market, for example, but it costs 10X to deliver reused plastic to the market, we can conclude the resources required to recycle plastic are 10 times more scarce than the resources required to make plastic from scratch. And because recycling is supposed to be about the conservation of resources, mandating recycling under those circumstances will do more harm than good."[49]
The recycling of waste electrical and electronic equipment in India and China generates a significant amount of pollution. Informal recycling in an underground economy of these countries has generated an environmental and health disaster. High levels of lead (Pb), polybrominated diphenylethers (PBDEs), polychlorinated dioxins and furans, as well as polybrominated dioxins and furans (PCDD/Fs and PBDD/Fs) concentrated in the air, bottom ash, dust, soil, water and sediments in areas surrounding recycling sites.[50] Critics also argue that while recycling may create jobs, they are often jobs with low wages and terrible working conditions.[51] These jobs are sometimes considered to be make-work jobs that don't produce as much as the cost of wages to pay for those jobs. In areas without many environmental regulations and/or worker protections, jobs involved in recycling such as ship breaking can result in deplorable conditions for both workers and the surrounding communities
[edit] Environmental impact
Economist Steven Landsburg, author of a paper entitled "Why I Am Not an Environmentalist," [52] has claimed that paper recycling actually reduces tree populations. He argues that because paper companies have incentives to replenish the forests they own, large demands for paper lead to large forests. Conversely, reduced demand for paper leads to fewer "farmed" forests.[53] Similar arguments were expressed in a 1995 article for The Free Market.
When foresting companies cut down trees, more are planted in their place. Most paper comes from pulp forests grown specifically for paper production.[46][54][55][56] Many environmentalists point out, however, that "farmed" forests are inferior to virgin forests in several ways. Farmed forests are not able to fix the soil as quickly as virgin forests, causing widespread soil erosion and often requiring large amounts of fertilizer to maintain while containing little tree and wild-life biodiversity compared to virgin forests.[57] Also, the new trees planted are not as big as the trees that were cut down, and the argument that there will be "more trees" is not compelling to forestry advocates when they are counting saplings.
Wood from tropical rainforests is rarely harvested for paper. Rainforest deforestation is mainly caused by population pressure demands for land.[58]
In some prosperous and many less prosperous countries in the world, the traditional job of recycling is performed by the entrepreneurial poor such as the karung guni, Zabaleen, the rag-and-bone man, waste picker, and junk man. With the creation of large recycling organizations that may be profitable, either by law or economies of scale,[59][60] the poor are more likely to be driven out of the recycling and the remanufacturing market. To compensate for this loss of income to the poor, a society may need to create additional forms of societal programs to help support the poor.[61] Like the parable of the broken window, there is a net loss to the poor and possibly the whole of a society to make recycling artificially profitable through law. However, as seen in Brazil and Argentina, waste pickers/informal recyclers are able to work alongside governments, in (semi)funded cooperatives, allowing informal recycling to be legitimized as a paying government job.[62]
Because the social support of a country is likely less than the loss of income to the poor doing recycling, there is a greater chance that the poor will come in conflict with the large recycling organizations.[63][64] This means fewer people can decide if certain waste is more economically reusable in its current form rather than being reprocessed. Contrasted to the recycling poor, the efficiency of their recycling may actually be higher for some materials because individuals have greater control over what is considered “waste.”[61]
One labor-intensive underused waste is electronic and computer waste. Because this waste may still be functional and wanted mostly by the poor, the poor may sell or use it at a greater efficiency than large recyclers.
Many recycling advocates believe that this laissez-faire individual-based recycling does not cover all of society’s recycling needs. Thus, it does not negate the need for an organized recycling program.[61] Local government often consider the activities of the recycling poor as contributing to property blight.
"Between 1960 and 2000, the world production of plastic resins increased 25-fold, while recovery of the material remained below 5%."[65]:131 Many studies have addressed recycling behaviour and strategies to encourage community involvement in recycling programmes. It has been argued [66] that recycling behaviour is not natural because it requires a focus and appreciation for long term planning, whereas humans have evolved to be sensitive to short term survival goals; and that to overcome this innate predisposition, the best solution would be to use social pressure to compel participation in recycling programmes. However, recent studies have concluded that social pressure is unviable in this context.[67] One reason for this is that social pressure functions well in small group sizes of 50 to 150 indiviudals (common to nomadic hunter-gatherer peoples) but not in communities numbering in the millions, as we see today. Another reason is that individual recycling does not take place in the public view. In a study done by social psychologist Shawn Burn,[68] it was found that personal contact with individuals within a neighborhood is the most effective way to increase recycling within a community. In his study, he had 10 block leaders talk to their neighbors and convince them to recycle. A comparison group was sent fliers promoting recycling. It was found that the neighbors that were personally contacted by their block leaders recycled much more than the group without personal contact. As a result of this study, Shawn Burn believes that personal contact within a small group of people is an important factor in encouraging recycling. Another study done by Stuart Oskamp [69] examines the effect of neighbors and friends on recycling. It was found in his studies that people who had friends and neighbors that recycled were much more likely to also recycle than those who didn’t have friends and neighbors that recycled.
In 2002, WNYC reported that 40% of the garbage that New York City residents separated for recycling actually ended up in landfills.[70]
- ^ "PM's advisor hails recycling as climate change action.". Letsrecycle.com. 2006-11-08. http://www.letsrecycle.com/do/ecco.py/view_item?listid=37&listcatid=231&listitemid=8155§ion=legislation. Retrieved 2010_06-19.
- ^ a b c d e f g h i j k l m n o p q r s t u v The League of Women Voters (1993). The Garbage Primer. New York: Lyons & Burford. pp. 35–72. ISBN [[Special:BookSources/1-55821-850-7|1-55821-850-7]].
- ^ a b Black Dog Publishing (2006). Recycle : a source book. London, UK: Black Dog Publishing. ISBN 1-904772-36-6.
- ^ a b c d e f g h i j k l m n "The truth about recycling". The Economist. June 7, 2007. http://www.economist.com/opinion/displaystory.cfm?story_id=9249262.
- ^ Carl A. Zimring (2005). Cash for Your Trash: Scrap Recycling in America. New Brunswick, NJ: Rutgers University Press. ISBN 0-8135-4694-X.
- ^ Out of the Garbage-Pail into the Fire: fuel bricks now added to the list of things salvaged by science from the nation's waste, Popular Science monthly, February 1919, page 50-51, Scanned by Google Books: http://books.google.com/books?id=7igDAAAAMBAJ&pg=PA50
- ^ a b c d e "The price of virtue". The Economist. June 7, 2007. http://www.economist.com/opinion/displaystory.cfm?story_id=9302727.
- ^ "Regulatory Policy Center — PROPERTY MATTERS — James V. DeLong". http://jamesvdelong.com/articles/environmental/wasting-away.html. Retrieved 2008-02-28.
- ^ ScienceDaily. (2007). Recycling Without Sorting Engineers Create Recycling Plant That Removes The Need To Sort.
- ^ Metal Stocks in Society: Scientific Synthesis 2010, International Resource Panel, United Nations Environment Programme
- ^ The Recycling Rates of Metals: A Status Report 2010, International Resource Panel, United Nations Environment Programme
- ^ N. C. McDonald and J. M. Pearce, “Producer Responsibility and Recycling Solar Photovoltaic Modules”, Energy Policy 38, pp. 7041–7047(2010). Open access available
- ^ Plastic Recycling codes, American Chemistry
- ^ About resin identification codes American Chemistry
- ^ "Recycling Symbols on Plastics - What Do Recycling Codes on Plastics Mean". The Daily Green. http://www.thedailygreen.com/green-homes/latest/recycling-symbols-plastics-460321?src=soc_fcbk. Retrieved February 29, 2012.
- ^ Unless otherwise indicated, this data is taken from The League of Women Voters (1993). The Garbage Primer. New York: Lyons & Burford. pp. 35–72. ISBN [[Special:BookSources/1-55821-850-7|1-55821-850-7]]. , which attributes, "Garbage Solutions: A Public Officials Guide to Recycling and Alternative Solid Waste Management Technologies, as cited in Energy Savings from Recycling, January/February 1989; and Worldwatch 76 Mining Urban Wastes: The Potential for Recycling, April 1987."
- ^ "Recycling metals — aluminium and steel". http://www.wasteonline.org.uk/resources/InformationSheets/metals.htm. Retrieved 2007-11-01.
- ^ Lavee D. (2007). Is Municipal Solid Waste Recycling Economically Efficient? Environmental Management.
- ^ Vigso, Dorte (2004). "Deposits on single use containers — a social cost-benefit analysis of the Danish deposit system for single use drink containers". Waste Management & Research 22 (6): 477. DOI:10.1177/0734242X04049252. PMID 15666450. http://wmr.sagepub.com/cgi/content/abstract/22/6/477.
- ^ "Minerals and Forensic Science" (PDF). University of Massachusetts Lowell, Department of Environmental, Earth, & Atmospheric Sciences.
- ^ "Phosphorus Famine: The Threat to Our Food Supply". Scientific American. June 2009
- ^ "Peak Everything?". Reason Magazine. April 27, 2010.
- ^ Gunter, Matthew. "Do Economists Reach a Conclusion on Household and Municipal Recycling?" (January 2007). [1]
- ^ Much toxic computer waste lands in Third World
- ^ Environmental and health damage in China
- ^ Illegal dumping and damage to health and environment
- ^ Hogg M. Waste outshines gold as prices surge. Financial Times.(Registration required)
- ^ Bonnie DeSimone. (2006). Rewarding Recyclers, and Finding Gold in the Garbage. New York Times.
- ^ a b Huesemann, M. H. (2003). "The limits of technological solutions to sustainable development". Clean Techn Environ Policy 5: 21–34. DOI:10.1007/s10098-002-0173-8. http://engineering.dartmouth.edu/~Benoit_R_Roisin/courses/engs171/Limits-to-Sustainability.pdf.
- ^ Tierney, John (June 30, 1996). "Recycling Is Garbage". New York: New York Times. p. 3. http://query.nytimes.com/gst/fullpage.html?res=990CE1DF1339F933A05755C0A960958260&sec=&spon=&pagewanted=1. Retrieved 2008-02-28.
- ^ Brown, M. T.; Buranakarn, V. (2003). "Emergy indices and ratios for sustainable material cycles and recycle options". Resources, Conservation and Recycling 38 (1): 1–22. DOI:10.1016/S0921-3449(02)00093-9. http://www.thaiscience.info/Article%20for%20ThaiScience/Article/4/Ts-4%20emergy%20indices%20and%20ratios%20for%20sustainable%20material%20cycles%20and%20recycle%20options.pdf.
- ^ Energy Information Administration Recycling Paper & Glass. Retrieved 18 October 2006.
- ^ Environmental Protection Agency Frequently Asked Questions about Recycling and Waste Management. Retrieved 18 October 2006.
- ^ Energetics, Inc. Et. all (1997). "Energy and Environmental Profile of the U.S. Aluminum Industry" Page 5,6.
- ^ "The Recycling of Aluminum Cans Versus Plastic". http://greenliving.nationalgeographic.com/recycling-aluminum-cans-versus-plastic-2375.html. Retrieved October 21, 2011.
- ^ Brunner, P. H. (1999). "In search of the final sink". Environ. Sci. & Pollut. Res. 6 (1): 1.
- ^ Landsburg, Steven A. The Armchair Economist. p. 86.
- ^ Selke 116
- ^ Grosse, F. (2010) “Is recycling 'part of the solution'? The role of recycling in an expanding society and a world of finite resources”. S.A.P.I.EN.S. 3 (1)
- ^ Sahni, S.; Gutowski, T. G. (2011). "Your scrap, my scrap! The flow of scrap materials through international trade". IEEE International Symposium on Sustainable Systems and Technology (ISSST): 1–6. DOI:10.1109/ISSST.2011.5936853. http://web.mit.edu/ebm/www/Publications/IEEE_2011_int_trade_sahni.pdf.
- ^ Waste to Wealth The Five Most Dangerous Myths About Recycling. Retrieved October 18, 2006.
- ^ United States Department of Energy Conserving Energy - Recycling Plastics. Retrieved 10 November 2006.
- ^ Environmental Protection Agency Markets for Recovered Glass. Retrieved 10 November 2006.
- ^ United States Geological Survey Mineral Commodity Summaries. Retrieved 10 November 2006.
- ^ Recycling Suddenly Gets Expensive : NPR
- ^ a b New York Times Recycling... Is Garbage (nytimes.com Published 30 June 1996) Recycling... Is Garbage (article reproduced) Recycling... Is Garbage (article reproduced). Retrieved 18 October 2006.
- ^ Diaper Recycling in California The Free Liberal, September 08, 2003
- ^ http://econlib.org/library/Columns/y2007/Mungerrecycling.html "Think Globally, Act Irrationally: Recycling
- ^ Recycling: It's a bad idea in New York The Heartland Institute, May 1, 2002
- ^ Sepúlveda, A.; Schluep, M.; Renaud, F. G.; Streicher, M.; Kuehr, R.; Hagelüken, C.; et al. (2010). "A review of the environmental fate and effects of hazardous substances released from electrical and electronic equipments during recycling: Examples from China and India". Environmental Impact Assessment Review 30: 28–41. DOI:10.1016/j.eiar.2009.04.001. http://ewasteguide.info/files/Sepulveda_2010_EIAR_0_0.pdf.
- ^ Heartland Institute Recycling: It's a bad idea in New York. Retrieved 18 October 2006.
- ^ http://www.shrubwalkers.com/prose/list/not.html
- ^ Landsburg, Steven A. The Armchair Economist. p. 81.
- ^ The Free Market Don't Recycle: Throw It Away!. Retrieved 4 November 2006.
- ^ Regulatory Policy Center WASTING AWAY: Mismanaging Municipal Solid Waste. Retrieved November 4, 2006.
- ^ Jewish World Review The waste of recycling. Retrieved 4 November 2006.
- ^ Baird, Colin (2004) Environmental Chemistry (3rd ed.) W. H. Freeman ISBN 0-7167-4877-0
- ^ "All About Paper". Paper University. http://www.tappi.org/paperu/all_about_paper/faq.htm. Retrieved 2009-02-12.
- ^ NRDC: Too Good To Throw Away - Appendix A
- ^ Mission Police Station
- ^ a b c PBS NewsHour, February 16, 2010. Report on the Zabaleen
- ^ Medina, M. (2000). "Scavenger cooperatives in Asia and Latin America.". Resources 31: 51–69.
- ^ The News-Herald - Scrap metal a steal
- ^ Raids On Recycling Bins Costly To Bay Area : NPR
- ^ Moore, C. J. (2008). "Synthetic polymers in the marine environment: A rapidly increasing, long-term threat". Environmental Research: 131–139.
- ^ [Schackelford, T.K. (2006) “Recycling, evolution and the structure of human personality”. Personality and Individual Differences 41 1551-1556 ]
- ^ Pratarelli, M.E. (2010) “Social pressure and recycling: a brief review, commentary and extensions”. S.A.P.I.EN.S. 3 (1)
- ^ Burn, Shawn. "Social Psychology and the Stimulation of Recycling Behaviors: The Block Leader Approach." Journal of Applied Social Psychology 21.8 (2006): 611-629.
- ^ Oskamp, Stuart. "Resource Conservation and Recycling: Behavior and Policy." Journal of Social Issues 51.4 (1995): 157-177. Print.
- ^ City Council Holds Hearings on Saving Recycling, WNYC, April 18, 2002
|
|
|
| Waste management |
|
|
| Recycling |
|
|
|
|
|
Philosophy and
definition |
|
|
| Consumption |
|
|
| Population |
|
|
| Technology |
|
|
|
|
|
|
Disciplines and activities
|
|
| Disciplines |
|
|
| Activities |
|
|
| Environmental |
|
|
| Management |
|
|
|
|
International reports and agreements
|
|
|
|
|
|
|
Lists and glossaries
|
|
| Lists |
|
|
Glossaries and
indices |
|
|
|
|
|
|
![Recycling a bottle, flashmob style! [HQ]](http://web.archive.org./web/20121216041549im_/http://i.ytimg.com/vi/GYnd5JRu86E/default.jpg "Recycling a bottle, flashmob style! [HQ]")
.JPG)
