Hydrogen sulfide
Systematic name Hydrogen sulfide[1]
Other names Dihydrogen monosulfide Dihydrogen sulfide Sewer gas Stink damp Sulfane Sulfurated hydrogen Sulfureted hydrogen Sulfuretted hydrogen Sulfur hydride Hydrosulfuric acid
Identifiers
CAS number	7783-06-4 Y
PubChem	402
ChemSpider	391 Y
UNII	YY9FVM7NSN Y
EC number	231-977-3
UN number	1053
KEGG	C00283 Y
MeSH	Hydrogen+sulfide
ChEBI	CHEBI:16136 Y
ChEMBL	CHEMBL1200739 N
RTECS number	MX1225000
Beilstein Reference	3535004
Gmelin Reference	303
3DMet	B01206
Jmol-3D images	Image 1
SMILES S
InChI InChI=1S/H2S/h1H2 Y Key: RWSOTUBLDIXVET-UHFFFAOYSA-N Y InChI=1/H2S/h1H2 Key: RWSOTUBLDIXVET-UHFFFAOYAJ
Properties
Molecular formula	H2S
Molar mass	34.08 g mol−1
Appearance	Colorless gas
Odor	faint rotten egg
Density	1.363 g dm-3
Melting point	-82 °C, 191 K, -116 °F
Boiling point	-60 °C, 213 K, -76 °F
Solubility in water	4 g dm-3 (at 20 °C)
Vapor pressure	1740 kPa (at 21 °C)
Acidity (pKa)	7.0[2]
Basicity (pKb)	6.95
Refractive index (nD)	1.000644 (0 °C) [3]
Structure
Molecular shape	Bent
Dipole moment	0.97 D
Thermochemistry
Std enthalpy of formation ΔfHo298	−21 kJ·mol−1[4]
Standard molar entropy So298	206 J·mol−1·K−1[4]
Specific heat capacity, C	1.003 J K-1 g-1
Hazards
EU Index	016-001-00-4
EU classification	F+ T+ N
R-phrases	R12, R26, R50
S-phrases	(S1/2), S9, S16, S36, S38, S45, S61
NFPA 704	4 4 0
Flash point	207 °C (closed cup)
Autoignition temperature	232 °C
Explosive limits	4.3–46%
Related compounds
Related hydrogen chalcogenides	Water Hydrogen selenide Hydrogen telluride Hydrogen polonide Hydrogen disulfide Sulfanyl
Related compounds	Phosphine
N (verify) (what is: Y/N?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Hydrogen sulfide (British English: hydrogen sulphide) is the chemical compound with the formula H₂S. It is a colorless, very poisonous, flammable gas with the characteristic foul odor of rotten eggs. It often results from the bacterial breakdown of organic matter in the absence of oxygen, such as in swamps and sewers; this process is commonly known as anaerobic digestion. It also occurs in volcanic gases, natural gas, and some well waters. The human body produces small amounts of H₂S and uses it as a signaling molecule.

Properties[link]

Hydrogen sulfide is slightly heavier than air; a mixture of H₂S and air is explosive. Hydrogen sulfide and oxygen burn with a blue flame to form sulfur dioxide (SO₂) and water. In general, hydrogen sulfide acts as a reducing agent.

At high temperature or in the presence of catalysts, sulfur dioxide can be made to react with hydrogen sulfide to form elemental sulfur and water. This is exploited in the Claus process, the main way to convert hydrogen sulfide into elemental sulfur.

Hydrogen sulfide is slightly soluble in water and acts as a weak acid, giving the hydrosulfide ion HS⁻ (pK_a = 6.9 in 0.01-0.1 mol/litre solutions at 18 °C). A solution of hydrogen sulfide in water, known as sulfhydric acid or hydrosulfuric acid, is initially clear but over time turns cloudy. This is due to the slow reaction of hydrogen sulfide with the oxygen dissolved in water, yielding elemental sulfur, which precipitates out. The sulfide dianion S²⁻ exists only in strongly alkaline aqueous solutions; it is exceptionally basic with a pK_a > 14.

Hydrogen sulfide reacts with metal ions to form metal sulfides, which may be considered the salts of hydrogen sulfide. Some ores are sulfides. Metal sulfides often have a dark color. Lead(II) acetate paper is used to detect hydrogen sulfide because it turns grey in the presence of the gas as lead(II) sulfide is produced. Reacting metal sulfides with strong acid liberates hydrogen sulfide.

If gaseous hydrogen sulfide is put into contact with concentrated nitric acid, it explodes.

Hydrogen sulfide reacts with alcohols to form thiols.

Production[link]

Hydrogen sulfide is most commonly obtained by its separation from sour gas, which is natural gas with high content of H₂S. It can also be produced by reacting hydrogen gas with molten elemental sulfur at about 450 °C. Hydrocarbons can replace hydrogen in this process.^[5]

Sulfate-reducing (resp. sulfur-reducing) bacteria generate usable energy under low-oxygen conditions by using sulfates (resp. elemental sulfur) to oxidize organic compounds or hydrogen; this produces hydrogen sulfide as a waste product.

The standard lab preparation is to react ferrous sulfide (FeS) with a strong acid in a Kipp generator.

FeS + 2 HCl → FeCl₂ + H₂S

A less well-known and more convenient alternative is to react aluminium sulfide with water:

6 H₂O + Al₂S₃ → 3 H₂S + 2 Al(OH)₃

This gas is also produced by heating sulfur with solid organic compounds and by reducing sulfurated organic compounds with hydrogen.

Hydrogen sulfide is also a byproduct of some reactions and caution should be taken when production is likely as exposure can be fatal.

Hydrogen sulfide production can be costly because of the dangers involved in production.

Occurrence[link]

Deposit of sulfur on a rock, caused by volcanic gases

Small amounts of hydrogen sulfide occur in crude petroleum, but natural gas can contain up to 90%.^[6] Volcanoes and some hot springs (as well as cold springs) emit some H₂S, where it probably arises via the hydrolysis of sulfide minerals, i.e. MS + H₂O → MO + H₂S.^{[citation needed]} Hydrogen sulfide can be present naturally in well water, often as a result of the action of sulfate-reducing bacteria.

About 10% of total global emissions of H₂S is due to human activity. By far the largest industrial route to H₂S occurs in petroleum refineries: The hydrodesulfurization process liberates sulfur from petroleum by the action of hydrogen. The resulting H₂S is converted to elemental sulfur by partial combustion via the Claus process, which is a major source of elemental sulfur. Other anthropogenic sources of hydrogen sulfide include coke ovens, paper mills (using the sulfate method), and tanneries. H₂S arises from virtually anywhere where elemental sulfur comes in contact with organic material, especially at high temperatures.

Uses[link]

Production of thioorganic compounds[link]

Several organosulfur compounds are produced using hydrogen sulfide. These include methanethiol, ethanethiol, and thioglycolic acid.

Alkali metal sulfides[link]

Upon combining with alkali metal bases, hydrogen sulfide converts to alkali hydrosulfides such as sodium hydrosulfide and sodium sulfide, which are used in the degradation of biopolymers. The depilation of hides and the delignification of pulp by the Kraft process both are effected by alkali sulfides.

Analytical chemistry[link]

For well over a century, hydrogen sulfide was important in analytical chemistry, in the qualitative inorganic analysis of metal ions. In these analyses, heavy metal (and nonmetal) ions (e.g., Pb(II), Cu(II), Hg(II), As(III)) are precipitated from solution upon exposure to H₂S. The components of the resulting precipitate redissolve with some selectivity.

For small-scale laboratory use in analytic chemistry, the use of thioacetamide has superseded H₂S as a source of sulfide ions.

Precursor to metal sulfides[link]

As indicated above, many metal ions react with hydrogen sulfide to give the corresponding metal sulfides. This conversion is widely exploited. For example, gases or waters contaminated by hydrogen sulfide can be cleaned with metal sulfides. In the purification of metal ores by flotation, mineral powders are often treated with hydrogen sulfide to enhance the separation. Metal parts are sometimes passivated with hydrogen sulfide. Catalysts used in hydrodesulfurization are routinely activated with hydrogen sulfide, and the behavior of metallic catalysts used in other parts of a refinery is also modified using hydrogen sulfide.

Miscellaneous applications[link]

Hydrogen sulfide is used to separate deuterium oxide, or heavy water, from normal water via the Girdler Sulfide process.

Removal from fuel gases[link]

Hydrogen sulfide is commonly found in natural gas, biogas, and LPG. It can be removed in a number of ways.

Reaction with iron oxide[link]

Gas is pumped through a container of hydrated iron(III) oxide, which combines with hydrogen sulfide.

Fe₂O₃(s) + H₂O(l) + 3 H₂S(g) → Fe₂S₃(s) + 4 H₂O(l)

In order to regenerate iron(III) oxide, the container must be taken out of service, flooded with water and aerated.

2 Fe₂S₃(s) + 3 O₂(g) + 2 H₂O(l) → 2 Fe₂O₃(s) + 2 H₂O(l) + 6 S(s)

On completion of the regeneration reaction the container is drained of water and can be returned to service.

The advantage of this system is that it is completely passive during the extraction phase.^[7]

Hydrodesulfurization[link]

Hydrodesulfurization is a more complex method of removing sulfur from fuels.

Safety[link]

Hydrogen sulfide is a highly toxic and flammable gas (flammable range: 4.3–46%). Being heavier than air, it tends to accumulate at the bottom of poorly ventilated spaces. Although very pungent at first, it quickly deadens the sense of smell, so potential victims may be unaware of its presence until it is too late. For safe handling procedures, a hydrogen sulfide material safety data sheet (MSDS) should be consulted.^[8]

In 1975, a hydrogen sulfide explosion in Denver City, located in Yoakum and Gaines counties, Texas, caused the state legislature to focus on the deadly hazards of the gas. State Representative E L Short of Tahoka in Lynn County, took the lead in endorsing an investigation by the Texas Railroad Commission and urged that residents be warned "by knocking on doors if necessary" of the imminent danger stemming from the gas. One may die from the second inhalation of the gas, and a warning itself may be too late.^[9]

Toxicity[link]

Hydrogen sulfide is considered a broad-spectrum poison, meaning that it can poison several different systems in the body, although the nervous system is most affected. The toxicity of H₂S is comparable with that of hydrogen cyanide. It forms a complex bond with iron in the mitochondrial cytochrome enzymes, thus preventing cellular respiration.

Since hydrogen sulfide occurs naturally in the body, the environment and the gut, enzymes exist in the body capable of detoxifying it by oxidation to (harmless) sulfate.^[10] Hence, low levels of hydrogen sulfide may be tolerated indefinitely.

At some threshold level, believed to average around 300–350 ppm, the oxidative enzymes become overwhelmed. Many personal safety gas detectors, such as those used by utility, sewage and petrochemical workers, are set to alarm at as low as 5 to 10 ppm and to go into high alarm at 15 ppm.

An interesting diagnostic clue of extreme poisoning by H₂S is the discoloration of copper coins in the pockets of the victim. Treatment involves immediate inhalation of amyl nitrite, injections of sodium nitrite, inhalation of pure oxygen, administration of bronchodilators to overcome eventual bronchospasm, and in some cases hyperbaric oxygen therapy (HBO). HBO therapy has anecdotal support and remains controversial.^[11][12][13]

Exposure to lower concentrations can result in eye irritation, a sore throat and cough, nausea, shortness of breath, and fluid in the lungs. These effects are believed to be due to the fact that hydrogen sulfide combines with alkali present in moist surface tissues to form sodium sulfide, a caustic.^[14] These symptoms usually go away in a few weeks.

Long-term, low-level exposure may result in fatigue, loss of appetite, headaches, irritability, poor memory, and dizziness. Chronic exposure to low level H₂S (around 2 ppm) has been implicated in increased miscarriage and reproductive health issues among Russian and Finnish wood pulp workers,^[15] but the reports have not (as of circa 1995) been replicated.

• 0.0047 ppm is the recognition threshold, the concentration at which 50% of humans can detect the characteristic odor of hydrogen sulfide,^[16] normally described as resembling "a rotten egg".
• Less than 10 ppm has an exposure limit of 8 hours per day.
• 10–20 ppm is the borderline concentration for eye irritation.
• 50–100 ppm leads to eye damage.
• At 100–150 ppm the olfactory nerve is paralyzed after a few inhalations, and the sense of smell disappears, often together with awareness of danger.^[17][18]
• 320–530 ppm leads to pulmonary edema with the possibility of death.
• 530–1000 ppm causes strong stimulation of the central nervous system and rapid breathing, leading to loss of breathing.
• 800 ppm is the lethal concentration for 50% of humans for 5 minutes exposure (LC50).
• Concentrations over 1000 ppm cause immediate collapse with loss of breathing, even after inhalation of a single breath.

Although respiratory paralysis may be immediate, it can also be delayed up to 72 hours.^[19]

Hydrogen sulfide was used by the British Army as a chemical agent during World War I. It was not considered to be an ideal war gas, but, while other gases were in short supply, it was used on two occasions in 1916.^[20]

A dump of toxic waste containing hydrogen sulfide is believed to have caused 17 deaths and thousands of illnesses in Abidjan, on the West Africa coast, in the 2006 Côte d'Ivoire toxic waste dump.

Suicides[link]

The gas, produced by mixing certain household ingredients, was used in a suicide wave in 2008 in Japan.^[21] The wave prompted staff at Tokyo's suicide prevention center to set up a special hot line during "Golden Week", as they received an increase in calls from people wanting to kill themselves during the annual May holiday.^[22]

As of 2010, this phenomenon has occurred in a number of US cities (and in Putney, West London, England), prompting warnings to those arriving at the site of the suicide.^[23] These first responders, such as emergency services workers or family members are at risk of death from inhaling lethal quantities of the gas, or by fire.^[24][25] Local governments have also initiated campaigns to prevent such suicides.

Function in the body[link]

Hydrogen sulfide is produced in small amounts by some cells of the mammalian body and has a number of biological signaling functions. (Only two other such gases are currently known: nitric oxide (NO) and carbon monoxide (CO).)

The gas is produced from cysteine by the enzymes cystathionine beta-synthase and cystathionine gamma-lyase. It acts as a relaxant of smooth muscle and as a vasodilator^[26] and is also active in the brain, where it increases the response of the NMDA receptor and facilitates long term potentiation,^[27] which is involved in the formation of memory.

Eventually the gas is converted to sulfite in the mitochondria by thiosulfate reductase, and the sulfite is further oxidized to thiosulfate and sulfate by sulfite oxidase. The sulfates are excreted in the urine.^[28]

Due to its effects similar to nitric oxide (without its potential to form peroxides by interacting with superoxide), hydrogen sulfide is now recognized as potentially protecting against cardiovascular disease.^[26] The cardioprotective role effect of garlic is caused by catabolism of the polysulfide group in allicin to H₂S, a reaction that could depend on reduction mediated by glutathione.^[29]

Though both nitric oxide and hydrogen sulfide have been shown to relax blood vessels, their mechanisms of action are different: while NO activates the enzyme guanylyl cyclase, H₂S activates ATP-sensitive potassium channel in smooth muscle cells. Researchers are not clear how the vessel-relaxing responsibilities are shared between nitric oxide and hydrogen sulfide. However there exists some evidence to suggest that nitric oxide does most of the vessel-relaxing work in large vessels and hydrogen sulfide is responsible for similar action in smaller blood vessels.^[30]

Like nitric oxide, hydrogen sulfide is involved in the relaxation of smooth muscle that causes erection of the penis, presenting possible new therapy opportunities for erectile dysfunction.^[31][32]

In Alzheimer's disease the brain's hydrogen sulfide concentration is severely decreased.^[33] In trisomy 21 (the most common form of Down syndrome) the body produces an excess of hydrogen sulfide.^[28] Hydrogen sulfide is also involved in the disease process of type 1 diabetes. The beta cells of the pancreas in type 1 diabetes produce an excess of the gas, leading to the death of beta cells and to a reduced production of insulin by those that remain.^[30]

Induced hypothermia/suspended animation[link]

In 2005, it was shown that mice can be put into a state of suspended animation-like hypothermia by applying a low dosage of hydrogen sulfide (81 ppm H₂S) in the air. The breathing rate of the animals sank from 120 to 10 breaths per minute and their temperature fell from 37 °C to just 2 °C above ambient temperature (in effect, they had become cold-blooded). The mice survived this procedure for 6 hours and afterwards showed no negative health consequences.^[34] In 2006 it was shown that the blood pressure of mice treated in this fashion with hydrogen sulfide did not significantly decrease.^[35]

A similar process known as hibernation occurs naturally in many mammals and also in toads, but not in mice. (Mice can fall into a state called clinical torpor when food shortage occurs). If the H₂S-induced hibernation can be made to work in humans, it could be useful in the emergency management of severely injured patients, and in the conservation of donated organs. In 2008, hypothermia induced by hydrogen sulfide for 48 hours was shown to reduce the extent of brain damage caused by experimental stroke in rats.^[36]

As mentioned above, hydrogen sulfide binds to cytochrome oxidase and thereby prevents oxygen from binding, which leads to the dramatic slowdown of metabolism. Animals and humans naturally produce some hydrogen sulfide in their body; researchers have proposed that the gas is used to regulate metabolic activity and body temperature, which would explain the above findings.^[37]

Two recent studies cast doubt that the effect can be achieved in larger mammals. A 2008 study failed to reproduce the effect in pigs, concluding that the effects seen in mice were not present in larger mammals.^[38] Likewise a paper by Haouzi et al. noted that there is no induction of hypometabolism in sheep, either.^[39]

At the February 2010 TED conference, Mark Roth announced that hydrogen sulfide induced hypothermia had completed Phase I clinical trials.^[40] The clinical trials commissioned by the company he helped found, Ikaria, were however withdrawn or terminated by August 2011.^[41][42]

Participant in the sulfur cycle[link]

Hydrogen sulfide is a central participant in the sulfur cycle, the biogeochemical cycle of sulfur on Earth.

In the absence of oxygen, sulfur-reducing and sulfate-reducing bacteria derive energy from oxidizing hydrogen or organic molecules by reducing elemental sulfur or sulfate to hydrogen sulfide. Other bacteria liberate hydrogen sulfide from sulfur-containing amino acids; this gives rise to the odor of rotten eggs and contributes to the odor of flatulence.

Sludge from a pond; the black color is due to metal sulfides

As organic matter decays under low-oxygen (or hypoxic) conditions (such as in swamps, eutrophic lakes or dead zones of oceans), sulfate-reducing bacteria will use the sulfates present in the water to oxidize the organic matter, producing hydrogen sulfide as waste. Some of the hydrogen sulfide will react with metal ions in the water to produce metal sulfides, which are not water soluble. These metal sulfides, such as ferrous sulfide FeS, are often black or brown, leading to the dark color of sludge.

Several groups of bacteria can use hydrogen sulfide as fuel, oxidizing it to elemental sulfur or to sulfate by using dissolved oxygen, metal oxides (e.g., Fe oxyhydroxides and Mn oxides) or nitrate as oxidant.^[43]

The purple sulfur bacteria and the green sulfur bacteria use hydrogen sulfide as electron donor in photosynthesis, thereby producing elemental sulfur. (In fact, this mode of photosynthesis is older than the mode of cyanobacteria, algae, and plants, which uses water as electron donor and liberates oxygen.)

Mass extinctions[link]

A hydrogen sulfide bloom (green) stretching for about 150km along the coast of Namibia. As oxygen-poor water reaches the coast, bacteria in the organic-matter rich sediment produce hydrogen sulfide which is toxic to fish.

Hydrogen sulfide has been implicated in several mass extinctions that have occurred in the Earth's past. In particular, a buildup of hydrogen sulfide in the atmosphere may have caused the Permian-Triassic extinction event 252 million years ago.^[44]

Organic residues from these extinction boundaries indicate that the oceans were anoxic (oxygen-depleted) and had species of shallow plankton that metabolized H₂S. The formation of H₂S may have been initiated by massive volcanic eruptions, which emitted carbon dioxide and methane into the atmosphere, which warmed the oceans, lowering their capacity to absorb oxygen that would otherwise oxidize H₂S. The increased levels of hydrogen sulfide could have killed oxygen-generating plants as well as depleted the ozone layer, causing further stress. Small H₂S blooms have been detected in modern times in the Dead Sea and in the Atlantic ocean off the coast of Namibia.^[44]

See also[link]

• Amine gas treating
• Sewer gas
• Induced hypothermia
• Jenkem
• Gasotransmitters

References[link]

Additional resources[link]

• "Hydrogen Sulfide", Committee on Medical and Biological Effects of Environmental Pollutants, University Park Press, 1979, Baltimore. ISBN 0-8391-0127-9

External links[link]

• International Chemical Safety Card 0165
• Concise International Chemical Assessment Document 53
• National Pollutant Inventory - Hydrogen sulfide fact sheet
• NIOSH Pocket Guide to Chemical Hazards
• NACE (National Association of Corrosion Epal)