A dairy farm near Oxford, New York in the United States.

A dairy is a business enterprise established for the harvesting of animal milk – mostly from cows or goats, but also from buffalo, sheep, horses or camels – for human consumption. A dairy is typically located on a dedicated dairy farm or section of a multi-purpose farm that is concerned with the harvesting of milk.

Terminology differs between countries. For example, in the United States, a farm building where milk is harvested is often called a milking parlor. In New Zealand such a building is historically known as the milking shed - although in recent years there has been a progressive change to call such a building a dairy farm.

In some countries, especially those with small numbers of animals being milked, as well as harvesting the milk from an animal, the dairy may also process the milk into butter, cheese and yogurt, for example. This is a traditional method of producing specialist milk products, especially in Europe. In the United States a dairy can also be a place that processes, distributes and sells dairy products, or a room, building or establishment where milk is stored and processed into milk products, such as butter or cheese. In New Zealand English the singular use of the word dairy almost exclusively refers to the corner convenience store, or superette. This usage is historical as such stores were a common place for the public to buy milk products.

As an attributive, the word dairy refers to milk-based products, derivatives and processes, and the animals and workers involved in their production: for example dairy cattle, dairy goat. A dairy farm produces milk and a dairy factory processes it into a variety of dairy products. These establishments constitute the dairy industry, a component of the food industry.

History[link]

Milk producing animals have been domesticated for thousands of years. Initially, they were part of the subsistence farming that nomads engaged in. As the community moved about the country, their animals accompanied them. Protecting and feeding the animals were a big part of the symbiotic relationship between the animals and the herders.

In the more recent past, people in agricultural societies owned dairy animals that they milked for domestic and local (village) consumption, a typical example of a cottage industry. The animals might serve multiple purposes (for example, as a draught animal for pulling a plough as a youngster, and at the end of its useful life as meat). In this case the animals were normally milked by hand and the herd size was quite small, so that all of the animals could be milked in less than an hour—about 10 per milker. These tasks were performed by a dairymaid (dairywoman) or dairyman. The word dairy harkens back to Middle English dayerie, deyerie, from deye (female servant or dairymaid) and further back to Old English dæge (kneader of bread).

With industrialisation and urbanisation, the supply of milk became a commercial industry, with specialised breeds of cattle being developed for dairy, as distinct from beef or draught animals. Initially, more people were employed as milkers, but it soon turned to mechanisation with machines designed to do the milking.

Farmer milking a cow by hand.

Historically, the milking and the processing took place close together in space and time: on a dairy farm. People milked the animals by hand; on farms where only small numbers are kept, hand-milking may still be practiced. Hand-milking is accomplished by grasping the teats (often pronounced tit or tits) in the hand and expressing milk either by squeezing the fingers progressively, from the udder end to the tip, or by squeezing the teat between thumb and index finger, then moving the hand downward from udder towards the end of the teat. The action of the hand or fingers is designed to close off the milk duct at the udder (upper) end and, by the movement of the fingers, close the duct progressively to the tip to express the trapped milk. Each half or quarter of the udder is emptied one milk-duct capacity at a time.

The stripping action is repeated, using both hands for speed. Both methods result in the milk that was trapped in the milk duct being squirted out the end into a bucket that is supported between the knees (or rests on the ground) of the milker, who usually sits on a low stool.

Traditionally the cow, or cows, would stand in the field or paddock while being milked. Young stock, heifers, would have to be trained to remain still to be milked. In many countries, the cows were tethered to a post and milked. The problem with this method is that it relies on quiet, tractable beasts, because the hind end of the cow is not restrained.

In 1937, it was found that bovine somatotropin (bST or bovine growth hormone) would increase the yield of milk. Monsanto Company developed a synthetic (recombinant) version of this hormone (rBST). In February 1994, rBST was approved by the Food and Drug Administration (FDA) for use in the U.S. It has become common in the U.S., but not elsewhere, to inject it into milch kine dairy cows to increase their production by up to 15%.

However, there are claims that this practice can have negative consequences for the animals themselves. A European Union scientific commission was asked to report on the incidence of mastitis and other disorders in dairy cows, and on other aspects of the welfare of dairy cows.^[1] The commission's statement, subsequently adopted by the European Union, stated that the use of rBST substantially increased health problems with cows, including foot problems, mastitis and injection site reactions, impinged on the welfare of the animals and caused reproductive disorders. The report concluded that on the basis of the health and welfare of the animals, rBST should not be used. Health Canada prohibited the sale of rBST in 1999; the recommendations of external committees were that, despite not finding a significant health risk to humans, the drug presented a threat to animal health and, for this reason, could not be sold in Canada.^[2]

Structure of the industry[link]

Wawa Dairy Farms in Pennsylvania

While most countries produce their own milk products, the structure of the dairy industry varies in different parts of the world. In major milk-producing countries most milk is distributed through wholesale markets. In Ireland and Australia, for example, farmers' co-operatives own many of the large-scale processors, while in the United States many farmers and processors do business through individual contracts. In the United States, the country's 196 farmers' cooperatives sold 86% of milk in the U.S. in 2002, with five cooperatives accounting for half that. This was down from 2,300 cooperatives in the 1940s.^[3] In developing countries, the past practice of farmers marketing milk in their own neighborhoods are changing rapidly. Notable developments include considerable foreign investment in the dairy industry and a growing role for dairy cooperatives. Output of milk is growing rapidly in such countries and presents a major source of income growth for many farmers.^[4]

As in many other branches of the food industry, dairy processing in the major dairy producing countries has become increasingly concentrated, with fewer but larger and more efficient plants operated by fewer workers. This is notably the case in the United States, Europe, Australia and New Zealand. In 2009, charges of anti-trust violations have been made against major dairy industry players in the United States.^[5]

Government intervention in milk markets was common in the 20th century. A limited anti-trust exemption was created for U.S. dairy cooperatives by the Capper-Volstead Act of 1922. In the 1930s, some U.S. states adopted price controls, and Federal Milk Marketing Orders started under the Agricultural Marketing Agreement Act of 1937 and continue in the 2000s. The Federal Milk Price Support Program began in 1949.^[3] The Northeast Dairy Compact regulated wholesale milk prices in New England from 1997 to 2001.^[6]

Plants producing liquid milk and products with short shelf life, such as yogurts, creams and soft cheeses, tend to be located on the outskirts of urban centres close to consumer markets. Plants manufacturing items with longer shelf life, such as butter, milk powders, cheese and whey powders, tend to be situated in rural areas closer to the milk supply. Most large processing plants tend to specialise in a limited range of products. Exceptionally, however, large plants producing a wide range of products are still common in Eastern Europe, a holdover from the former centralized, supply-driven concept of the market.^{[citation needed]}

As processing plants grow fewer and larger, they tend to acquire bigger, more automated and more efficient equipment. While this technological tendency keeps manufacturing costs lower, the need for long-distance transportation often increases the environmental impact.^[7]

Milk production is irregular, depending on cow biology. Producers must adjust the mix of milk which is sold in liquid form vs. processed foods (such as butter and cheese) depending on changing supply and demand.^[3]

Operation of the dairy farm[link]

When it became necessary to milk larger numbers of cows, the cows would be brought to a shed or barn that was set up with bails (stalls) where the cows could be confined while they were milked. One person could milk more cows this way, as many as 20 for a skilled worker. But having cows standing about in the yard and shed waiting to be milked is not good for the cow, as she needs as much time in the paddock grazing as is possible. It is usual to restrict the twice-daily milking to a maximum of an hour and a half each time. It makes no difference whether one milks 10 or 1000 cows, the milking time should not exceed a total of about three hours each day for any cow.

As herd sizes increased there was more need to have efficient milking machines, sheds, milk-storage facilities (vats), bulk-milk transport and shed cleaning capabilities and the means of getting cows from paddock to shed and back.

Farmers found that cows would abandon their grazing area and walk towards the milking area when the time came for milking. This is not surprising as, in the flush of the milking season, cows presumably get very uncomfortable with udders engorged with milk, and the place of relief for them is the milking shed.

As herd numbers increased so did the problems of animal health. In New Zealand two approaches to this problem have been used. The first was improved veterinary medicines (and the government regulation of the medicines) that the farmer could use. The other was the creation of veterinary clubs where groups of farmers would employ a veterinarian (vet) full-time and share those services throughout the year. It was in the vet's interest to keep the animals healthy and reduce the number of calls from farmers, rather than to ensure that the farmer needed to call for service and pay regularly.

Most dairy farmers milk their cows with absolute regularity at a minimum of twice a day, with some high-producing herds milking up to four times a day to lessen the weight of large volumes of milk in the udder of the cow. This daily milking routine goes on for about 300 to 320 days per year that the cow stays in milk. Some small herds are milked once a day for about the last 20 days of the production cycle but this is not usual for large herds. If a cow is left unmilked just once she is likely to reduce milk-production almost immediately and the rest of the season may see her dried off (giving no milk) and still consuming feed for no production. However, once-a-day milking is now being practised more widely in New Zealand for profit and lifestyle reasons. This is effective because the fall in milk yield is at least partially offset by labour and cost savings from milking once per day. This compares to some intensive farm systems in the United States that milk three or more times per day due to higher milk yields per cow and lower marginal labor costs.

Farmers who are contracted to supply liquid milk for human consumption (as opposed to milk for processing into butter, cheese, and so on—see milk) often have to manage their herd so that the contracted number of cows are in milk the year round, or the required minimum milk output is maintained. This is done by mating cows outside their natural mating time so that the period when each cow in the herd is giving maximum production is in rotation throughout the year.

Northern hemisphere farmers who keep cows in barns almost all the year usually manage their herds to give continuous production of milk so that they get paid all year round. In the southern hemisphere the cooperative dairying systems allow for two months on no productivity because their systems are designed to take advantage of maximum grass and milk production in the spring and because the milk processing plants pay bonuses in the dry (winter) season to carry the farmers through the mid-winter break from milking. It also means that cows have a rest from milk production when they are most heavily pregnant. Some year-round milk farms are penalised financially for over-production at any time in the year by being unable to sell their overproduction at current prices.

Artificial insemination (AI) is common in all high-production herds.

Industrial processing[link]

A Fonterra cooperative dairy factory in Australia.

Interior of a cheese factory in Seine-et-Marne, France

Dairy plants process the raw milk they receive from farmers so as to extend its marketable life. Two main types of processes are employed: heat treatment to ensure the safety of milk for human consumption and to lengthen its shelf-life, and dehydrating dairy products such as butter, hard cheese and milk powders so that they can be stored.

Cream and butter[link]

Today, milk is separated by huge machines in bulk into cream and skim milk. The cream is processed to produce various consumer products, depending on its thickness, its suitability for culinary uses and consumer demand, which differs from place to place and country to country.

Some cream is dried and powdered, some is condensed (by evaporation) mixed with varying amounts of sugar and canned. Most cream from New Zealand and Australian factories is made into butter. This is done by churning the cream until the fat globules coagulate and form a monolithic mass. This butter mass is washed and, sometimes, salted to improve keeping qualities. The residual buttermilk goes on to further processing. The butter is packaged (25 to 50 kg boxes) and chilled for storage and sale. At a later stage these packages are broken down into home-consumption sized packs.

Skimmed milk[link]

The product left after the cream is removed is called skim, or skimmed, milk.To make a consumable liquid a portion of cream is returned to the skim milk to make low fat milk (semi-skimmed) for human consumption. By varying the amount of cream returned, producers can make a variety of low-fat milks to suit their local market. Other products, such as calcium, vitamin D, and flavouring, are also added to appeal to consumers.

Casein[link]

Casein is the predominant phosphoprotein found in fresh milk. It has a very wide range of uses from being a filler for human foods, such as in ice cream, to the manufacture of products such as fabric, adhesives, and plastics.

Cheese[link]

Cheese is another product made from milk. Whole milk is reacted to form curds that can be compressed, processed and stored to form cheese. In countries where milk is legally allowed to be processed without pasteurisation a wide range of cheeses can be made using the bacteria naturally in the milk. In most other countries, the range of cheeses is smaller and the use of artificial cheese curing is greater. Whey is also the byproduct of this process. Some people that are lactose intolerant can eat certain types of cheese.

Whey[link]

In earlier times whey was considered to be a waste product and it was, mostly, fed to pigs as a convenient means of disposal. Beginning about 1950, and mostly since about 1980, lactose and many other products, mainly food additives, are made from both casein and cheese whey.

Yogurt[link]

Yogurt (or yoghurt) making is a process similar to cheese making, only the process is arrested before the curd becomes very hard.

Milk powders[link]

Milk is also processed by various drying processes into powders. Whole milk, skim milk, buttermilk, and whey products are dried into a powder form and used for human and animal consumption. The main difference between production of powders for human or for animal consumption is in the protection of the process and the product from contamination. Some people drink milk reconstituted from powdered milk, because milk is about 88% water and it is much cheaper to transport the dried product.

Other milk products[link]

Kumis is produced commercially in Central Asia. Although it is traditionally made from mare's milk, modern industrial variants may use cow's milk instead.

Transport of milk[link]

Milk churns on a railway platform

Historically, the milking and the processing took place in the same place: on a dairy farm. Later, cream was separated from the milk by machine, on the farm, and the cream was transported to a factory for buttermaking. The skim milk was fed to pigs. This allowed for the high cost of transport (taking the smallest volume high-value product), primitive trucks and the poor quality of roads. Only farms close to factories could afford to take whole milk, which was essential for cheesemaking in industrial quantities, to them. The development of refrigeration and better road transport, in the late 1950s, has meant that most farmers milk their cows and only temporarily store the milk in large refrigerated bulk tanks, from where it is later transported by truck to central processing facilities.

Milking machines[link]

The milking machine extracts milk from all teats.

Milking machines are used to harvest milk from cows when manual milking becomes inefficient or labour intensive. The milking unit is the portion of a milking machine for removing milk from an udder. It is made up of a claw, four teatcups, (Shells and rubber liners) long milk tube, long pulsation tube, and a pulsator. The claw is an assembly that connects the short pulse tubes and short milk tubes from the teatcups to the long pulse tube and long milk tube. (Cluster assembly) Claws are commonly made of stainless steel or plastic or both. Teatcups are composed of a rigid outer shell (stainless steel or plastic) that holds a soft inner liner or inflation. Transparent sections in the shell may allow viewing of liner collapse and milk flow. The annular space between the shell and liner is called the pulse chamber.

Milking machines work in a way that is different from hand milking or calf suckling. Continuous vacuum is applied inside the soft liner to massage milk from the teat by creating a pressure difference across the teat canal (or opening at the end of the teat). Vacuum also helps keep the machine attached to the cow. The vacuum applied to the teat causes congestion of teat tissues (accumulation of blood and other fluids). Atmospheric air is admitted into the pulsation chamber about once per second (the pulsation rate) to allow the liner to collapse around the end of teat and relieve congestion in the teat tissue. The ratio of the time that the liner is open (milking phase) and closed (rest phase) is called the pulsation ratio.

The four streams of milk from the teatcups are usually combined in the claw and transported to the milkline, or the collection bucket (usually sized to the output of one cow) in a single milk hose. Milk is then transported (manually in buckets) or with a combination of airflow and mechanical pump to a central storage vat or bulk tank. Milk is refrigerated on the farm in most countries either by passing through a heat-exchanger or in the bulk tank, or both.

In the photo above is a bucket milking system with the stainless steel bucket visible on the far side of the cow. The two rigid stainless steel teatcup shells applied to the front two quarters of the udder are visible. The top of the flexible liner is visible at the top of the shells as are the short milk tubes and short pulsation tubes extending from the bottom of the shells to the claw. The bottom of the claw is transparent to allow observation of milk flow. When milking is completed the vacuum to the milking unit is shut off and the teatcups are removed.

Milking machines keep the milk enclosed and safe from external contamination. The interior 'milk contact' surfaces of the machine are kept clean by a manual or automated washing procedures implemented after milking is completed. Milk contact surfaces must comply with regulations requiring food-grade materials (typically stainless steel and special plastics and rubber compounds) and are easily cleaned.

Most milking machines are powered by electricity but, in case of electrical failure, there can be an alternative means of motive power, often an internal combustion engine, for the vacuum and milk pumps. Raghav Gowda from Karnataka, India has developed a low cost environment friendly milking machine which uses a 2-piston reciprocating pump operated manually for creating vacuum.^[8] Milk cows cannot tolerate delays in scheduled milking without serious milk production reductions.

Milking shed layouts[link]

Milking parlour at Pardes Hanna Agricultural High School, Israel

Bail-style sheds— This type of milking facility was the first development, after open-paddock milking, for many farmers. The building was a long, narrow, lean-to shed that was open along one long side. The cows were held in a yard at the open side and when they were about to be milked they were positioned in one of the bails (stalls). Usually the cows were restrained in the bail with a breech chain and a rope to restrain the outer back leg. The cow could not move about excessively and the milker could expect not to be kicked or trampled while sitting on a (three-legged) stool and milking into a bucket. When each cow was finished she backed out into the yard again. The UK bail, developed largely by Rex Patterson, was a six standing mobile shed with steps that the cow mounted, so the herdsman didn't have to bend so low. The milking equipment was much as today, a vacuum from a pump, pulsators, a claw-piece with pipes leading to the four shells and liners that stimulate and suck the milk from the teat. The milk went into churns, via a cooler.

As herd sizes increased a door was set into the front of each bail so that when the milking was done for any cow the milker could, after undoing the leg-rope and with a remote link, open the door and allow her to exit to the pasture. The door was closed, the next cow walked into the bail and was secured. When milking machines were introduced bails were set in pairs so that a cow was being milked in one paired bail while the other could be prepared for milking. When one was finished the machine's cups are swapped to the other cow. This is the same as for Swingover Milking Parlours as described below except that the cups are loaded on the udder from the side. As herd numbers increased it was easier to double-up the cup-sets and milk both cows simultaneously than to increase the number of bails. About 50 cows an hour can be milked in a shed with 8 bales by one person. Using the same teat cups for successive cows has the danger of transmitting infection, mastitis, from one cow to another. Some farmers have devised their own ways to disinfect the clusters between cows.

Herringbone Milking Parlours— In herringbone milking sheds, or parlours, cows enter, in single file, and line up almost perpendicular to the central aisle of the milking parlour on both sides of a central pit in which the milker works (you can visualise a fishbone with the ribs representing the cows and the spine being the milker's working area; the cows face outward). After washing the udder and teats the cups of the milking machine are applied to the cows, from the rear of their hind legs, on both sides of the working area. Large herringbone sheds can milk up to 600 cows efficiently with two people.

Swingover Milking Parlours— Swingover parlours are the same as herringbone parlours except they have only one set of milking cups to be shared between the two rows of cows, as one side is being milked the cows on the other side are moved out and replaced with unmilked ones. The advantage of this system is that it is less costly to equip, however it operates at slightly better than half-speed and one would not normally try to milk more than about 100 cows with one person.

80-stand rotary dairy that is fully computerised and records milk production

Rotary Milking sheds— Rotary milking sheds consist of a turntable with about 12 to 100 individual stalls for cows around the outer edge. A "good" rotary will be operated with 24–32 (~48–50+) stalls by one (two) milkers. The turntable is turned by an electric-motor drive at a rate that one turn is the time for a cow to be milked completely. As an empty stall passes the entrance a cow steps on, facing the centre, and rotates with the turntable. The next cow moves into the next vacant stall and so on. The operator, or milker, cleans the teats, attaches the cups and does any other feeding or whatever husbanding operations that are necessary. Cows are milked as the platform rotates. The milker, or an automatic device, removes the milking machine cups and the cow backs out and leaves at an exit just before the entrance. The rotary system is capable of milking very large herds—over a thousand cows.

Automatic Milking sheds— Automatic milking or 'robotic milking' sheds can be seen in Australia, New Zealand and many European countries. Current automatic milking sheds use the voluntary milking (VM) method. These allow the cows to voluntarily present themselves for milking at any time of the day or night, although repeat visits may be limited by the farmer through computer software. A robot arm is used to clean teats and apply milking equipment, while automated gates direct cow traffic, eliminating the need for the farmer to be present during the process. The entire process is computer controlled.^[9]

Supplementary accessories in sheds— Farmers soon realised that a milking shed was a good place to feed cows supplementary foods that overcame local dietary deficiencies or added to the cows' wellbeing and production. Each bail might have a box into which such feed is delivered as the cow arrives so that she is eating while being milked. A computer can read the eartag of each beast to ration the correct individual supplement. A close alternative is to use 'out-of-parlour-feeders', stalls that respond to a transponder around the cow's neck that is programmed to provide each cow with a supplementary feed, the quantity dependent on her production, stage in lactation, and the benefits of the main ration

The holding yard at the entrance of the shed is important as a means of keeping cows moving into the shed. Most yards have a powered gate that ensures that the cows are kept close to the shed.

Water is a vital commodity on a dairy farm: cows drink about 20 gallons (80 litres) a day, sheds need water to cool and clean them. Pumps and reservoirs are common at milking facilities. Water can be warmed by heat transfer with milk.

Temporary milk storage[link]

Milk coming from the cow is transported to a nearby storage vessel by the airflow leaking around the cups on the cow or by a special "air inlet" (5-10 l/min free air) in the claw. From there it is pumped by a mechanical pump and cooled by a heat exchanger. The milk is then stored in a large vat, or bulk tank, which is usually refrigerated until collection for processing.

Processing facilities[link]

Topics:

• Pasteurization, homogenization
• Cream extraction
• Cheese making
• Buttermaking
• Caseinmaking
• Yogurt processing

Waste disposal[link]

Manure spreader going to the field from a dairy farm, Elba, New York.

In countries where cows are grazed outside year-round, there is little waste disposal to deal with. The most concentrated waste is at the milking shed, where the animal waste is liquefied (during the water-washing process) and allowed to flow by gravity, or pumped, into composting ponds with anaerobic bacteria to consume the solids. The processed water and nutrients are then pumped back onto the pasture as irrigation and fertilizer. Surplus animals are slaughtered for processed meat and other rendered products.

In the associated milk processing factories, most of the waste is washing water that is treated, usually by composting, and returned to waterways. This is much different from half a century ago, when the main products were butter, cheese and casein, and the rest of the milk had to be disposed of as waste (sometimes as animal feed).

In areas where cows are housed all year round, the waste problem is difficult because of the amount of feed that is brought in and the amount of bedding material that also has to be removed and composted. The size of the problem can be understood by standing downwind of the barns where such dairying goes on.

In many cases, modern farms have very large quantities of milk to be transported to a factory for processing. If anything goes wrong with the milking, transport or processing facilities it can be a major disaster trying to dispose of enormous quantities of milk. If a road tanker overturns on a road, the rescue crew is looking at accommodating the spill of 5 to 10 thousand gallons of milk (20 to 45 thousand litres) without allowing any into the waterways. A derailed rail tanker-train may involve 10 times that amount. Without refrigeration, milk is a fragile commodity, and it is very damaging to the environment in its raw state due to its high biochemical oxygen demand.^{[citation needed]} A widespread electrical power blackout is another disaster for the dairy industry, because both milking and processing facilities are affected. For this, farms may often use mobile generators. Such a situation occurred during the power outage caused by the 2010 Canterbury Earthquake.^{[citation needed]}

In dairy-intensive areas, various methods have been proposed for disposing of large quantities of milk. These directives include feeding milk to livestock, spray irrigation or designating a sacrifice area.^{[citation needed]} Large application rates of milk onto land, or disposing in a hole, is problematic as the residue from the decomposing milk will block the soil pores and thereby reduce the water infiltration rate through the soil profile. As recovery of this effect can take time, any land based application needs to be well managed and considered.^[10]

Associated diseases[link]

• Leptospirosis is one of the most common debilitating diseases of milkers, made somewhat worse since the introduction of herringbone sheds, because of unavoidable direct contact with bovine urine
• Cowpox is one of the helpful diseases; it is barely harmful to humans and tends to inoculate them against other poxes such as small pox.
• Tuberculosis (TB) is able to be transmitted from cattle mainly via milk products that are unpasteurised. TB has been eradicated from many countries by testing for the disease and culling suspected animals.
• Brucellosis is a bacterial disease transmitted to humans by dairy products and direct animal contact. Brucellosis has been eradicated from certain countries by testing for the disease and culling suspected animals
• Listeria is a bacterial disease associated with unpasteurised milk, and can affect some cheeses made in traditional ways. Careful observance of the traditional cheesemaking methods achieves reasonable protection for the consumer.
• Johne's Disease (pronounced "yo-knees") is a contagious, chronic and sometimes fatal infection in ruminants caused by a bacterium named Mycobacterium avium subspecies paratuberculosis (M. paratuberculosis). The bacteria are present in retail milk, and are believed by some researchers to be the primary cause of Crohn's disease in humans. This disease is not known to infect animals in Australia and New Zealand.

Notes[link]

1. ^ (pdf) Report on Animal Welfare Aspects of the Use of Bovine Somatotrophin. The Scientific Committee on Animal Health and Animal Welfare, European Union. 1999-03-10. http://ec.europa.eu/food/fs/sc/scah/out21_en.pdf. Retrieved 2008-01-16 
2. ^ "Health Canada rejects bovine growth hormone in Canada". Health Canada. 1999-01-14. Archived from the original on 2008-01-10. http://web.archive.org/web/20080110050349/http://www.hc-sc.gc.ca/ahc-asc/media/nr-cp/1999/1999_03_e.html. Retrieved 2008-01-16. 
3. ^ ^{a b c} "Cooperative Information, Report 1, Section 16". United States Department of Agriculture, Rural Development. September 2005. http://www.rurdev.usda.gov/rbs/pub/cir116.pdf. 
4. ^ FAO, Milk for Health and Wealth, FAO, Rome, 2009
5. ^ [Independent Farmers Feel Squeezed By Milk Cartel] by John Burnett. All Things Considered, National Public Radio. 20 August 2009.
6. ^ "Monthly Compact, Federal Order #1, and Over-Order Prices for Class I Milk Since the Compact Regulation Took Effect in July of 1997". Northeast Dairy Compact Commission. http://www.dairycompact.org/prices.htm. 
7. ^ Cleaner Production Assessment in Dairy Processing, by COWI Consulting Engineers and Planners, United Nations Environment Programme Division of Technology, Industry, and Economics, Denmark Miljøstyrelsen. Published by UNEP/Earthprint, 2000 (ISBN 9789280718423). Text at Agrifood Forum - Publications - Downloads - Sector Guides - Index.
8. ^ “Manual Milking Machine”, National Innovation Foundation, India
9. ^ "Robotic dairy at Winnindoo, Victoria, Australia". http://www.roboticdairy.com/indexframe01.htm. 
10. ^ "Waste Management". Environmental Best Practice Guidelines. Dairy Catch. http://www.ecohydrology.uwa.edu.au/__data/page/142432/Waste_Management.pdf. 

References[link]

• Jay, J.M. (1992). Modern Food Microbiology. Fourth Edition. New York: Chapman & Hall. pp. 237–9.
• Potter, N.N. & J. H. Hotchkiss. (1995). Food Science. Fifth Edition. New York: Chapman & Hall. pp. 279–315.
• Swasigood, H.E. (1985). "Characteristics of Edible Fluids of Animal Origin: Milk." In Food Chemistry. Second Edition. Revised and Expanded. O.R. Fennema, Ed. New York: Marcell Dekker, Inc. pp. 791–827.

External links[link]

	Agriculture and Agronomy portal
	Drink portal
	Food portal

Wikimedia Commons has media related to: Dairying

Look up dairy in Wiktionary, the free dictionary.

• Raising Dairy Calves
• Dairy Council of California
• National Dairy Council
• University of Guelph Dairy Science and Technology Education Series -- Online technical information about dairy products.
• Dairy Science and Food Technology: Starters, Probiotics, Cheese and Antimicrobial Systems
• Dairy Market review
• Dairy and the US Congress collection, Center for Digital Initiatives, University of Vermont Library
• Virtual Museum Exhibit on Past Domestic Production of Milk, Cream and Butter

This article's citation style may be unclear. The references used may be made clearer with a different or consistent style of citation, footnoting, or external linking. (February 2011)

The Product
Background information
Origin	Detroit, Michigan
Genres	Alternative Rock
Members
B.J. Perry R.J. Perry Rich Bennett Charlie Jewell
Past members
Jerome Reilly

The Product is an Alternative Rock band based out of Detroit, Michigan. The Product formed in early 2009 with the original line-up of B.J. Perry, R.J. Perry, Rich Bennett and Jerome Reilly. Several months later the band parted ways with Jerome, and picked up former band mate and high school friend Charlie Jewell. They have released one E.P. titled "Break The Silence" along with several singles.

History[link]

Break The Silence (2009)[link]

Their debut EP, Break The Silence, was self-released in 2009 and generated an instant buzz throughout the Midwest.^[1] The track "Nightmare" stayed at Number 1 on Alternative Addiction's top ten Unsigned Bands list for several months. The band went on to tour the Midwest extensively and sold over 4,000 copies of BTS. Also, the track from the E.P. "Better Off This Way" had a clip appear in the hit MTV show Jersey Shore ^[2]

One (Early 2010)[link]

The band covered the song "One" by Harry Nillson, and more famously covered by Three Dog Night, in 2010.^[3]

Make Your Move (Late 2010 - Early 2011)[link]

Make Your Move was the theme song for Total Nonstop Action's Final Resolution (2010).^[4] The song is also being used by the Detroit Red Wings organization being played at home games at the Joe Louis Arena as well being featured in a hits collage on their website.^[5] The song is expected to be re-released on The Product's follow up release "So Alive" expected in 2011. The Product was also named the number one unsigned band of the year by voters on Alternative Addiction.com,^[6] as well as featured on the music discovery site Daily Unsigned.^[7]

So Alive (2011 - Present)[link]

The band is currently under the direction of Restless Management Group out of Los Angeles, California and is in the process of getting together their next release "So Alive." while working with notable producer Greg Archilla ^[8]

Tour[link]

The Product has toured throughout the Midwest gaining a loyal following in those states. They won the Ernie Ball Warped Tour Battle of the Bands and played the Detroit date at Comerica Park, as well as opening up for nationals like Cavo, Mayday Parade, and Pop Evil, and Danko Jones at the sold out WWBN Banana Binge Before Christmas Show in 2010.^[9]

Band Members[link]

• B.J. Perry - Lead Vocals/Rhythm Guitar
• R.J. Perry - Drums
• Rich Bennett - Bass/Vocals
• Charlie Jewell - Lead Guitar/Vocals

References[link]

External links[link]

• Official Website

Philip Wollen OAM (born 1950) is an Australian philanthropist. He is a former vice-president of Citibank and was also a general manager at Citicorp.^[1] At age 34, Australian Business Magazine named him in the top 40 headhunted executives in Australia.^[2] In 2005 he received the Order of Australia ^[3] and in 2007 he won the Australian of the Year (Victoria) award ^[4].

The following was said about Philip by the National Australia Day Council:

"Through his kindness and generosity, Philip Wollen brings crucial help to many charitable causes and inspires others to share his humanitarian values and ideals. His achievements in the business world mark him as a man of action and he channels this energy into practical outcomes for the causes he champions through the Winsome Constance Kindness Trust. Philip promotes kindness towards all other living beings and strives to enshrine this as a recognisable trait in the Australian character and culture. The measure of his support can be seen in the extraordinary list of organisations the Winsome Constance Kindness Trust supports, benefiting children, animals, the ill, the environment and aspiring youth. Essentially a private man, he seeks no personal publicity but is not afraid to step into the limelight for a just cause."^[5]

Philip lives with his wife Trix and his four dogs in Melbourne, Victoria.

Winsome Constance Kindness Trust[link]

Philip Wollen's main project, the Winsome Constance Kindness Trust, is a global initiative whose mission statement is "to promote kindness towards all other living beings and enshrine it as a recognisable trait in the Australian character and culture".^[6] The Trust emphasises ethics, compassion and co-operation, and opposes cruelty to humans and non-human animals. In 2006 the Trust had initiatives in 34 countries and is growing.

Mrs Maneka Gandhi's Article in the Indian newspapers on Philip Wollen.

"Everyone in the animal welfare movement knows that the Australian ,Philip Wollen, is not a human being. He is from another planet. They simply do not make humans like him any more. He went from Bangalore to Australia when he was young, taught himself , got a job in a bank, rose to the top, left it, became rich and now donates all his money to animals and orphans and people who need it. He does so on a moment's notice. He doesn't want paperwork , he just needs to trust you and he does that easily. He picks up fights with aggressively anti animal governments and media , he pays for lectures , he supports the anti whaling campaigns of activists around the world, he builds sanctuaries in Asia for bears. On top of that , he is tall, handsome, well read, a vegan, speaks his mind, jokes a lot and writes deliciously. He lives in Melbourne with a beautiful wife called Trix and they work to make their money save the world. The name of their trust is The Winsome Constance Kindness Trust. Obviously he has landed here on a UFO and the technical word for his species is 'angel '.

This is a list of organisations supported by the Winsome Constance Kindness Trust.^[7][8]

• Amnesty International - Australia
• Anglican Church of Australia
• Anglicare Australia
• Animal Active - Australia
• Animal Aid Society - India
• Animal Help Foundation - India
• Animal House - Jamaica
• Animal Network - South Australia
• Animal People - Seattle
• Animal Rights and Rescue - Australia
• Animal Voice - South Africa
• Animal Welfare League of Queensland - Australia
• Animals Asia - China
• Animals Australia - Australia
• Animed Arad - Romania- Animal Rescue Branch (ARB)
• Anti Cancer Council - Australia
• ARB - Beijing
• Asociacion Para La Defensa De Los Derenchos Del Animal - Argentina
• Asthma Foundation Australia
• Australia West Papua Association - Australia
• Australia West Papua Association - Australia
• Australian Sports Foundation - Australia
• Australian Wildlife Protection Council - Australia
• Ballarat Organisation for Animal Rights - BOAR - Australia
• Beirut for the Ethical Treatment of Animals - BETA - Lebanon
• Beyond Zero Emissions - Australia
• Bishop Cotton Boys School - India
• Blue Cross of India - India
• Bordertown High School - Australia
• Brotherhood of St Laurence - Australia
• Cartmans - India
• CatRescue - Australia
• Centre for Animal Rehabilitation & Education - South Africa (CARE)
• Christian Blind Mission International
• Coalition Against Duck Hunting - Australia
• Compassion in World Farming - United Kingdom
• Compassion Unlimited Plus Action - India
• Daisy Hope Foundation - Romania
• Darjeeling Goodwill Animal Shelter - India
• Daw House Palliative Care - Australia
• Dharma Donkey Sanctuary - India
• Drakenstein Lion Park - South Africa
• Edgars Mission - Australia
• Egyptian Society of Animal friends - Egypt
• Enkosini Animal Sanctuary - South Africa
• Epilepsy Foundation - Australia
• Food Not Bombs - Australia
• Free the Bears - Australia
• Friendicoes Society - India
• Gentle World - New Zealand/Hawaii
• Hahndorf Animal Shelter - Australia
• Help in Suffering - India
• Homeless Animal Protection Society - Ethiopia
• HOPE and Animals Trust - India
• In Defence of Animals - India
• International Centre for Alternatives in Research & Education (I-CARE) - Chennai
• Kalahari Raptor Centre - South Africa
• Karuna Society for Animals - India
• Keith Area School Foundation - Australia
• Korean Animal Protection Society - Korea
• Last Chance For Animals - USA
• Leo Tolstoy Centre of Ethics - Ukraine
• Linis Gobyerno Native AnimBaguio City - The Philippines
• Morning Star Orphanage - India
• Multiple Sclerosis - Australia
• Museum Victoria & Scienceworks - Australia
• NSPCA - Zimbabwe
• O.R.C.A - Australia
• PACAT - People Against Cruelty in Animal Transport - Australia
• Pan Law Primary School - Myanmar
• Paraquad Paraplegics - Australia
• PAWS - Philippine Animal Welfare Society Manila - The Philippines
• PAWS - Plants Animals Welfare Society - India
• People for Animals Agra - India
• People for Animals Calcutta - India
• People for Animals Chandigarh - India
• People for Animals Chennai - India
• People for Animals Dehradun - India
• People for Animals Ghaziabad - India
• People for Animals Guwahati - India
• People for Animals Hooghly - India
• People for Animals Lucknow - India
• People for Animals Orissa - India
• Pet Rescue Australia - Australia
• PETA (People for The Ethical Treatment of Animals) - USA
• Philipsgate Project - Australia
• Phnom Tamao Wildlife Rescue - Cambodia
• Red Cross - Australia
• Royal Children's Hospital - Australia
• Royal Humane Society - Australia
• RSPCA - Australia
• S.P.A.R.E - Society for the Protection of Animal Rights - Egypt
• Salvation Army - Australia
• Save a Dog Scheme - SADS - Australia
• Save Our Friends Association - SOFA - Sri Lanka
• Say No to Animals in Pet Shops - Australia
• Sea Shepherd Conservation Society - USA
• Sealalert - South Africa
• The Smith Family - Australia
• Social Firms Australia - Australia
• Society of St. Vincent de Paul - Australia
• Soi Dog Foundation - Thailand
• South Australian Children's Ballet Company - Australia
• St James Centre of Ethics - Australia
• The MCKee Project - Costa Rica
• The Torch Project - Australia
• The Wilderness Society - Australia
• Tower Hill Stables Animal Sanctuary - England
• Vegetarian Victoria - Australia
• Vegetarian/Vegan Society of Queensland - Australia
• Very Special Kids - Australia
• Victoria Police - Australia
• Visakha SPCA - India
• Wildlife At Risk - Vietnam
• Wildlife Protection Association Australia - Australia
• WildlifeSOS - India
• World Society for the Protection of Animals - Pakistan
• World Vision - Australia
• World Society for the Protection of Animals - Australia
• Youth for Conservation - Kenya
• Zero Emission Network - Australia
• ZooPeru - Peru

External links[link]

• Winsome Constance Kindness Trust
• Australia Day Awards 2005
• Philip Wollen's quotes from All Creatures
• Altruism Australia

References[link]

This biographical article about a philanthropist is a stub. You can help Wikipedia by expanding it. v t e