- published: 03 Jul 2009
- views: 529712
- author: advancedbiker
Vimeo results:
Youtube results:
- Related News
- Top Headlines
- French
- German
- Hindi
- Indonesian
- Italian
- Persian
- Portuguese
- Russian
- Spanish
- Engine
- Unity Game Engine
- Tile Engine Tutorials
- Model Engine Videos
- Veyron`s Engine
- Basic Engine Building
Loading...
Open Collage in a new Window
Email the Collage
- Loading...
Loading suggestions ...
- Aeolipile
- Aerodynamic
- Ahmad Y Hassan
- Air engine
- Air quality
- Air-breathing engine
- Aircraft engine
- Al-Jazari
- Aldehydes
- Alternating current
- Ancient Greece
- Ancient Rome
- Aqueduct
- Atkinson cycle
- Atmospheric pressure
- Ausonius
- Automobile
- Automobile engine
- Battering ram
- Battery (electric)
- Beale number
- Bearing (mechanical)
- Block and tackle
- BMW
- Brayton cycle
- Bugatti Veyron
- Burning
- Capstan (nautical)
- Carbon dioxide
- Carbon footprint
- Carbon monoxide
- Carnot cycle
- Carnot heat engine
- Catalytic converter
- Catapult
- Cattle
- Chemical energy
- Clockwork motor
- Combined cycle
- Combustion
- Combustion chamber
- Compressed air
- Conrod
- Cotton gin
- Crane (machine)
- Crank (mechanism)
- Dam
- De Rivaz
- Diesel cycle
- Diesel engine
- Duct jet engine
- Dynamo
- Elastic band
- Elastic energy
- Electric locomotive
- Electric motor
- Electrical conductor
- Electrical energy
- Electrical generator
- Electricity
- Emma Maersk
- Energy
- Energy consumption
- Engine
- Engine cooling
- Engine efficiency
- Engine test stand
- Ericsson cycle
- External combustion
- Fireworks
- Fluid
- Fluid mechanics
- Fluidyne engine
- Force
- Fossil fuel
- France
- Friction loss
- Frontinus
- Fuel
- Fuel efficiency
- Funicular
- Gas
- Gas compressor
- Gas turbine
- Gasoline engine
- Gear
- Gear reduction
- Gears
- Giovanni Branca
- Global warming
- Gravity plane
- Greenhouse effect
- Hampson-Linde cycle
- Hard drive
- HCCI
- Heat
- Heat engine
- Heat exchanger
- Hero of Alexandria
- Hesselman engine
- Honda
- Horse
- Hot air engine
- Hot bulb engine
- Humphrey cycle
- Hydraulic engine
- Hydraulic motor
- Hydrocarbons
- Hydrogen
- Hydrogen peroxide
- Induction motor
- Inductor
- Internal combustion
- IRIS engine
- Islamic Golden Age
- James Watt
- Jet engine
- Kalina cycle
- Karl Benz
- Kilowatt hour
- Kleemenko cycle
- Latin
- Lenoir cycle
- Lever
- Liquid
- Mace (club)
- Machine
- Machine (mechanical)
- Magnetic fields
- Manual labour
- Marine propulsion
- Matthew Boulton
- Mechanical advantage
- Mechanical energy
- Mechanical work
- Mechanization
- Mercedes (car)
- Military
- Mill (grinding)
- Miller cycle
- Mining
- Mixed Dual Cycle
- Model engine
- Molecular motor
- Motion (physics)
- Motorcycle
- Motorcycle engine
- Muffler
- Multifuel
- Muscle
- Myosin
- Nicéphore Niépce
- Nitrogen
- Nitrogen monoxide
- Nitrous oxide
- Noise pollution
- Oar
- Old French
- Otto cycle
- Outboard motor
- Oxidation
- Oxidise
- Oxidiser
- Oxidizer
- Oxygen
- Parthian Empire
- Phase (matter)
- Photo-Carnot engine
- Piston
- Pliny the Elder
- Pneumatic motor
- Power tools
- Prehistory
- Premium efficiency
- Pressure
- Propulsive nozzle
- Pulley
- Pulse jet
- Pump
- Rail transport
- Railway locomotive
- Ramjet
- Rankine cycle
- Reciprocating engine
- Regenerative cooling
- Regenerative cycle
- Rijke tube
- Road roller
- Rocket
- Rocket engine
- Rocket motor
- Roman Empire
- Rope
- Ropeway conveyor
- Rotor (electric)
- Scramjet
- Scuderi cycle
- Ship
- Siege engine
- Siege engines
- Siemens cycle
- Simple machine
- Sluice
- Specific impulse
- Split-single
- Stator
- Steam
- Steam engine
- Steam locomotive
- Steam turbine
- Steamroller
- Steel
- Stirling cycle
- Stirling engine
- Stoddard cycle
- Strabo
- Sulfur dioxide
- Tata McGraw-Hill
- Temperature
- Thermodynamic cycle
- Torque
- Traction engine
- Traction motor
- Transcritical cycle
- Treadwheel
- Trebuchet
- Turbine
- Turbine blade
- Turboprop
- V8 engine
- Vitruvius
- Volkswagen Beetle
- Vuilleumier cycle
- W16 engine
- Water turbine
- Water vapor
- Water wheel
- Watt (unit)
- West number
- Wiktionary engine
- Wiktionary motor
- Wind
- Wind-up toy
- Windlass
- Windmill
- Working animals
- 热效率
-
France
France (English
i/ˈfræns/ FRANSS or /ˈfrɑːns/ FRAHNSS; French: [fʁɑ̃s] (
listen)), officially the French Republic (French: République française [ʁepyblik fʁɑ̃sɛz]), is a unitary semi-presidential republic in Western Europe with several overseas territories and islands located on other continents and in the Indian, Pacific, and Atlantic oceans. Metropolitan France extends from the Mediterranean Sea to the English Channel and the North Sea, and from the Rhine to the Atlantic Ocean. It is often referred to as l’Hexagone ("The Hexagon") because of the geometric shape of its territory. It is the largest western European country and it possesses the second-largest exclusive economic zone in the world, covering 11,035,000 km2 (4,260,000 sq mi), just behind that of the United States (11,351,000 km2 / 4,383,000 sq mi).
Over the past 500 years, France has been a major power with strong cultural, economic, military and political influence in Europe and around the world. During the 17th and 18th centuries, France colonised great parts of North America and Southeast Asia; during the 19th and early 20th centuries, France built the second largest colonial empire of the time, including large portions of North, West and Central Africa, Southeast Asia, and many Caribbean and Pacific Islands.
wn.com/France -
Parthian Empire
The Parthian (pronounced /ˈpɑrθiən/) Empire (247 BC – 224 AD), also known as the Arsacid (/ˈɑrsəsɪd/) Empire (Modern Persian: اشکانیان Ashkāniān), was a major Iranian political and cultural power in ancient Persia. Its latter name comes from Arsaces I of Parthia who, as leader of the Parni tribe, founded it in the mid-3rd century BC when he conquered the Parthia region in Iran's northeast, then a satrapy (province) in rebellion against the Seleucid Empire. Mithridates I of Parthia (r. c. 171–138 BC) greatly expanded the empire by seizing Media and Mesopotamia from the Seleucids. At its height, the Parthian Empire stretched from the northern reaches of the Euphrates, in what is now south-eastern Turkey, to eastern Iran. The empire, located on the Silk Road trade route between the Roman Empire in the Mediterranean Basin and Han Empire of China, became a center of trade and commerce.
The Parthians largely adopted the art, architecture, religious beliefs, and royal insignia of their culturally heterogeneous empire, which encompassed Persian, Hellenistic, and regional cultures. For about the first half of its existence, the Arsacid court adopted elements of Greek culture, though it eventually saw a gradual revival of Iranian traditions. The Arsacid rulers were titled the "King of Kings", as a claim to be the heirs to the Achaemenid Empire; indeed, they accepted many local kings as vassals where the Achaemenids would have had centrally appointed, albeit largely autonomous, satraps. The court did appoint a small number of satraps, largely outside Iran, but these satrapies were smaller and less powerful than the Achaemenid potentates. With the expansion of Arsacid power, the seat of central government shifted from Nisa, Turkmenistan to Ctesiphon along the Tigris (south of modern Baghdad, Iraq), although several other sites also served as capitals.
wn.com/Parthian_Empire -
Steam
Steam is the technical term for water vapor, the gaseous phase of water, which is formed when water boils. In common language it is often used to refer to the visible mist of water droplets formed as this water vapor condenses in the presence of cooler air. At lower pressures, such as in the upper atmosphere or at the top of high mountains water boils at a lower temperature than the nominal 100 °C (212 °F) at standard temperature and pressure. If heated further it becomes superheated steam.
The enthalpy of vaporization is the energy required to turn water into the gaseous form when it increases in volume by 1,600 times at standard temperature and pressure; this change in volume can be converted into mechanical work by steam engines and steam turbines. Steam engines played a central role to the Industrial Revolution and modern steam turbines are used to generate electricity. If liquid water comes in contact with a very hot substance (such as lava, or molten metal) it can create a steam explosion. Steam explosions have been responsible for many foundry accidents and may also have been responsible for much of the damage to the plant in the Chernobyl accident.
wn.com/Steam
-
Ahmad Y Hassan
Ahmad Yousef Al-Hassan (Arabic: أحمد يوسف الحسن) (June 25, 1925 - April 28, 2012 ) was a historian of Arabic and Islamic science and technology , educated in Jerusalem, Cairo and London with a Ph.D. in Mechanical engineering from University College London. He was Dean of Engineering and later President of the University of Aleppo where he founded the Institute for the History of Arabic Science (IHAS) and was its first director. He also served as Minister of Petroleum, Electricity and Mineral Resources of Syria .
wn.com/Ahmad_Y_Hassan -
Al-Jazari
Badi'al-Zaman Abū al-'Izz Ismā'īl ibn al-Razāz al-Jazarī (1136–1206) (Arabic: بديع الزمان أَبُو اَلْعِزِ بْنُ إسْماعِيلِ بْنُ الرِّزاز الجزري , Kurdish: Ebûlizê Cizîrî) was an Arab or a KurdishMuslim polymath: a scholar, inventor, mechanical engineer, craftsman, artist, and mathematician from Jazirat ibn Umar (current Cizre), who lived during the Islamic Golden Age (Middle Ages). He is best known for writing the al-Jāmiʿ bain al-ʿilm wa al-ʿamal al-nāfiʿ fī ṣināʿat al-ḥiyal (The Book of Knowledge of Ingenious Mechanical Devices) in 1206, where he described fifty mechanical devices along with instructions on how to construct them.
Little is known about al-Jazari, and most of that comes from the introduction to his Book of Knowledge of Ingenious Mechanical Devices. He was named after the area in which he was born (the city of Jazirat ibn Umar). Like his father before him, he served as chief engineer at the Artuklu Palace, the residence of the Mardin branch of the Turkish Artuqid dynasty which ruled across eastern Anatolia as vassals of the Zangid rulers of Mosul and later Ayyubid general Saladin. He was born in the Kurdish city of Tor, now located in the district of Cizre in south-Eastern Turkey.
wn.com/Al-Jazari -
Ausonius
Decimius Magnus Ausonius (ca. 310–ca. 394) was a Latin poet and teacher of rhetoric at Burdigala (Bordeaux, France). For a time he was tutor to the future emperor Gratian, who afterwards bestowed the Consulship on him. His best-known poems are Mosella, a description of the river Moselle, and Ephemeris, an account of a typical day in his life. His many other verses show his concern for his family, friends, teachers and circle of well-to-do acquaintances, and his delight in the technical handling of meter.
Decimus Magnus Ausonius was born ca. 310 in Bordeaux, the son of Julius Ausonius, a physician of Greek ancestry, and Aemilia Aeonia, daughter of Caecilius Argicius Arborius, descended on both sides from established, land-owning Gallo-Roman families of southwestern Gaul. Ausonius was given a strict upbringing by his aunt and grandmother, both named Aemilia. He received an excellent education at Bordeaux and at Toulouse, where his maternal uncle, Aemilius Magnus Arborius, was a professor. Ausonius did well in grammar and rhetoric, but professed that his progress in Greek was unsatisfactory. When his uncle was summoned to Constantinople to tutor one of the sons of emperor Constantine I, Ausonius accompanied him to the capital.
wn.com/Ausonius -
De Rivaz
François Isaac de Rivaz (Paris, December 19, 1752 – Sion, July 30, 1828) was an inventor and a politician. He invented a hydrogen powered internal combustion engine with electric ignition and described it in a French patent published in 1807. In 1808 he fitted it into a primitive working vehicle - 'the world's first internal combustion powered automobile'.
François Isaac was born in Paris to a family from Valais. In 1763 the family settled in Moûtiers in Savoy (Kingdom of Sardinia). The last two boys, Anne Joseph and Isaac came to settle in St. Gingolph in Valais. It is not known at which schools he studied, but he became fluent in Latin plus mastering mathematics and geometry, whilst continuing his study of mechanics throughout his life. He qualified as both a surveyor and notary and worked for the state of Valais.
Isaac had many interests plus an intuitive and extremely curious mind which was driven by the demon of discovery. His experimental work was overflowing. He experimented with steam-powered vehicles in the late 18th century. He also studied the ignition of combustible gases.
wn.com/De_Rivaz -
Giovanni Branca
Giovanni Branca (22 April 1571 – 24 January 1645) was an Italian engineer and architect, chiefly remembered today for what some commentators have taken to be an early steam engine.
Branca was born in 22 April 1571 in Sant'Angelo in Lizzola. From 1616 Branca was employed at the Sacra Casa (Virgin’s Holy House) in Loreto. He was made a citizen of Rome in 1622. He died in 24 January 1645 in Loreto.
Branca designed many different mechanical inventions, a collection of which he dedicated to Cenci, the governor of Loreto, Ancona. These were later published in book form at Rome in 1629, under the title Le machine. The work contains 63 engravings with descriptions in Italian and Latin and was an example of the Theater of machines genre which had appeared in the 16th century, named after Jacques Besson's Theatrum Instrumentorum of 1571. However, where Besson's book had been beautifully illustrated with engravings, Branca's book was a small octavo volume illustrated with relatively poor quality woodcuts.
wn.com/Giovanni_Branca -
Hero of Alexandria
Hero (or Heron) of Alexandria (Greek: Ἥρων ὁ Ἀλεξανδρεύς) (c. 10–70 AD) was an ancient Greek mathematician and engineer who was active in his native city of Alexandria, Roman Egypt. He is considered the greatest experimenter of antiquity and his work is representative of the Hellenistic scientific tradition.
Hero published a well recognized description of a steam-powered device called an aeolipile (hence sometimes called a "Hero engine"). Among his most famous inventions was a windwheel, constituting the earliest instance of wind harnessing on land. He is said to have been a follower of the Atomists. Some of his ideas were derived from the works of Ctesibius.
Much of Hero's original writings and designs have been lost, but some of his works were preserved in Arab manuscripts.
A number of references mention dates around 150 BC, but these are inconsistent with the dates of his publications and inventions. This may be due to a misinterpretation of the phrase "first century" or because Hero was a common name.
wn.com/Hero_of_Alexandria -
James Watt
James Watt, FRS, FRSE (19 January 1736 – 25 August 1819) was a Scottish inventor and mechanical engineer whose improvements to the Newcomen steam engine were fundamental to the changes brought by the Industrial Revolution in both his native Great Britain and the rest of the world.
While working as an instrument maker at the University of Glasgow, Watt became interested in the technology of steam engines. He realised that contemporary engine designs wasted a great deal of energy by repeatedly cooling and re-heating the cylinder. Watt introduced a design enhancement, the separate condenser, which avoided this waste of energy and radically improved the power, efficiency, and cost-effectiveness of steam engines. Eventually he adapted his engine to produce rotary motion, greatly broadening its use beyond pumping water.
Watt attempted to commercialize his invention, but experienced great financial difficulties until 1775 he entered a partnership with Matthew Boulton. The new firm of Boulton and Watt was eventually highly successful and Watt became a wealthy man. In his retirement, Watt continued to develop new inventions though none were as significant as his steam engine work. He died in 1819 at the age of 83. Watt has been described as one of the most influential figures in human history.
wn.com/James_Watt -
Karl Benz
Karl Friedrich Benz (help·info) (November 25, 1844 – April 4, 1929) was a German engine designer and car engineer, generally regarded as the inventor of the gasoline-powered automobile, and together with Bertha Benz pioneering founder of the automobile manufacturer Mercedes-Benz. Other German contemporaries, Gottlieb Daimler and Wilhelm Maybach working as partners, also worked on similar types of inventions, without knowledge of the work of the other, but Benz patented his work first, and, subsequently patented all the processes that made the internal combustion engine feasible for use in an automobile. In 1879 his first engine patent was granted to him and in 1886 Benz was granted a patent for his first automobile.
Karl Benz was born Karl Friedrich Michael Vaillant, in Karlsruhe, Baden, which is part of modern Germany, to Josephine Vaillant and a locomotive driver, Johann George Benz, whom she married a few months later. When he was two years old, his father was killed in a railway accident, and his name was changed to Karl Friedrich Benz in remembrance of his father.
wn.com/Karl_Benz -
Matthew Boulton
Matthew Boulton FRS (/ˈboʊltən/; 3 September 1728 – 17 August 1809) was an English manufacturer and business partner of Scottish engineer James Watt. In the final quarter of the 18th century the partnership installed hundreds of Boulton & Watt steam engines, which were a great advance on the state of the art, making possible the mechanisation of factories and mills. Boulton applied modern techniques to the minting of coins, striking millions of pieces for Britain and other countries, and supplying the Royal Mint with up-to-date equipment.
Born in Birmingham, England in 1728, Boulton was the son of a Birmingham manufacturer of small metal products who died when Boulton was 31. By then Boulton had managed the business for several years, and thereafter expanded it considerably, consolidating operations at the Soho Manufactory, built by him near Birmingham. At Soho, he adopted the latest techniques, branching into silver plate, ormolu and other decorative arts. He became associated with James Watt when Watt's business partner, John Roebuck, was unable to pay a debt to Boulton, who accepted Roebuck's share of Watt's patent as settlement. He then successfully lobbied Parliament to extend Watt's patent for an additional 17 years, enabling the firm to market Watt's steam engine. The firm installed hundreds of Boulton & Watt steam engines in Britain and abroad, initially in mines and then in factories.
wn.com/Matthew_Boulton -
Model engine
In radio-controlled modeling, a model engine is an internal combustion engine used to power a radio-controlled aircraft, radio-controlled car, radio-controlled boat, free flight and control line aircraft, and tether car models also use these engines. Because of the square-cube law, the behaviour of many machines does not always scale up or down at the same rate as the machine's size (and often not even in a linear way), usually at best causing a dramatic loss of power or efficiency, and at worst causing them not to work at all. Methanol and nitromethane are proven solutions to enhance the power of an automobile engine (Top Fuel) and they can even get these small engines running.
wn.com/Model_engine -
Nicéphore Niépce
Nicéphore Niépce (born Joseph Niépce) March 7, 1765 – July 5, 1833) was a French inventor, most noted as one of the inventors of photography and a pioneer in the field. He is most noted for producing the world's first known photograph in 1825. Among Niépce's other inventions was the Pyréolophore, the world's first 'internal combustion engine', which he conceived, created, and developed with his older brother Claude, finally receiving a patent on July 20, 1807 from the Emperor Napoleon Bonaparte, after successfully powering a boat upstream on the river Saône.
Niépce was born in Chalon-sur-Saône, Saône-et-Loire, where his father was a wealthy lawyer; this caused the whole family to flee the French Revolution. His elder brother Claude (1763–1828) was also his collaborator in research and invention, but died half mad and broke in England, having squandered the family wealth in pursuit of non-opportunities for the Pyréolophore. He also had a sister and a younger brother called Bernard.
Nicéphore was baptised Joseph but adopted the name Nicéphore, in honour of Saint Nicephorus the ninth-century Patriarch of Constantinople, while studying at the Oratorian college in Angers.[citation needed] At the college he learned science and the experimental method, rapidly achieving success and graduating to work as a professor of the college.
wn.com/Nicéphore_Niépce -
Pliny the Elder
Gaius Plinius Secundus (23 AD – August 25, 79 AD), better known as Pliny the Elder, was a Roman author, naturalist, and natural philosopher, as well as naval and army commander of the early Roman Empire, and personal friend of the emperor Vespasian. Spending most of his spare time studying, writing or investigating natural and geographic phenomena in the field, he wrote an encyclopedic work, Naturalis Historia, which became a model for all such works written subsequently. Pliny the Younger, his nephew, wrote of him in a letter to the historian Tacitus:
Pliny is referring to the fact that Tacitus relied on his uncle's now missing work on the History of the German Wars. Pliny the Elder died on August 25, 79 AD, while attempting the rescue by ship of a friend and his family from the eruption of Mount Vesuvius that had just destroyed the cities of Pompeii and Herculaneum. The prevailing wind would not allow his ship to leave the shore. His companions attributed his collapse and death to toxic fumes; but they were unaffected by the fumes, suggesting natural causes.
wn.com/Pliny_the_Elder -
Strabo
Strabo,,[pronunciation?], also written Strabon (Greek: Στράβων; 64/63 BC – ca. AD 24), was a Greek geographer, philosopher and historian.
Strabo was born to an affluent family from Amaseia in Pontus (modern Amasya, Turkey), a city that he said was situated the approximate equivalent of 75 km from the Black Sea. His mother was Georgian. Pontus had recently fallen to the Roman Republic, and although politically he was a proponent of Roman imperialism, Strabo belonged on his mother's side to a prominent family whose members had held important positions under the resisting regime of King Mithridates VI of Pontus.
Strabo's life was characterized by extensive travels. He journeyed to Egypt and Kush, as far west as coastal Tuscany and as far south as Ethiopia in addition to his travels in Asia Minor and time spent in Rome. Travel throughout the Mediterranean and Near East, especially for scholarly purposes, was popular during this era and was facilitated by the relative peace enjoyed throughout the reign of Augustus (27 BC – AD 14). He moved to Rome in 44 BC, and stayed there, studying and writing, until at least 31 BC. In 29 BC, on his way to Corinth (where Augustus was at the time), he visited the island of Gyaros in the Aegean Sea. Around 25 BC, he sailed up the Nile until reaching Philae, after which point there is little record of his proceedings until 17 AD.
wn.com/Strabo -
Vitruvius
Marcus Vitruvius Pollio (born c. 80–70 BC, died after c. 15 BC) was a Roman writer, architect and engineer, active in the 1st century BC. He is best known as the author of the multi-volume work De Architectura ("On Architecture").
By his own description Vitruvius served as a ballista (artilleryman), the third class of arms in the military offices. He likely served as chief of the ballista (senior officer of artillery) in charge of doctores ballistarum (artillery experts) and libratores who actually operated the machines.
Little is known about Vitruvius' life. Most inferences about him are extracted from his only surviving work De Architectura. His first name Marcus and his cognomen Pollio are uncertain. He was possibly a praefectus fabrum during military service or praefect architectus armamentarius of the apparitor status group. Cetius Faventinus speaks of "Vitruvius Polio aliique auctores" in his epitome; it is possible that the cognomen derives from this mention by Cetius, meaning Vitruvius, Polio, and others - further confusing the cognomen, an inscription in Verona names Lucius Vitruvius Cordo and an inscription from Thilbilis North Africa (near Guelma) names Marcus Vitruvius Mamurra. From this inscription the archaeologist Dr. G. Q. Giglioli nearly concludes that Vitruvius and Mamurra are from the same family.
wn.com/Vitruvius
Extreme Engineering
Cast
- Danny Forster
- Joseph Giotta
- Larc Spies
- John Littlefield
- Santiago Calatrava
- Robert Childs
- Bob Budell
- Frank Davidson
- Walter Grantz
- Glenn Wrage
- Season 1
-
Episode 1: Tokyo's Sky City
USA:13 April 2003...
-
Episode 2: Subways in America
USA:15 April 2003...
-
Episode 3: Transatlantic Tunnel
USA:16 April 2003...
-
Episode 4: City in a Pyramid
USA:23 April 2003...
-
Episode 5: Bridging the Bering Strait
USA:30 April 2003...
-
Episode 6: Tunneling Under the Alps
USA:7 May 2003...
-
Episode 7: Building Hong Kong's Airport
USA:14 May 2003...
-
Episode 8: Holland's Barriers to the Sea
USA:21 May 2003...
-
Episode 9: Boston's Big Dig
USA:28 May 2003...
-
Episode 10: Widening the Panama Canal
USA:4 June 2003...
- Season 2
-
Episode 1: Venice Flood Gates
- Episode 2: Container Ships
- Episode 3: Oakland Bay Bridge
USA:2004...- Episode 4: Iceland Tunnels
- Episode 5: Cooper River Bridge
USA:8 November 2004...- Episode 6: Turning Torso
- Episode 7: Millau Viaduct
- Episode 8: Excavators
- Episode 9: Offshore Oil Platforms
- Season 3
- Episode 1: Snohvit Arctic Gas Processing Platform
USA:19 October 2005...- Episode 2: El Cajon Dam
USA:10 November 2005...- Episode 3: Hong Kong's Cable Car
- Episode 4: Woodrow Wilson Bridge
- Episode 5: Gotthard Tunnel
- Episode 6: Dubai's Ski Resort
- Season 4
- Episode 1: Super Stadium
USA:19 February 2006...- Episode 2: Mega Tunnel
USA:8 March 2006...- Episode 3: Biggest Warship
USA:31 May 2006...- Episode 4: Sakhalin Oil & Ice
USA:28 June 2006...- Episode 5: Big Easy Rebuild
USA:5 July 2006...- Episode 6: Space Tower
USA:12 July 2006...- Season 5
- Episode 1: NYC: South Ferry Subway Station
USA:11 October 2006...- Episode 2: World's Biggest Arch Bridge
USA:18 October 2006...- Episode 3: JFK: JetBlue Terminal
USA:25 October 2006...- Episode 4: Stonecutters Bridge: Hong Kong
USA:1 November 2006...- Episode 5: California Academy of Sciences
USA:8 November 2006...- Episode 6: Hallandsas Ridge Tunnel: Sweden
USA:15 November 2006...- Season 6
- Episode 1: Building a Destroyer
UK:16 October 2007...- Episode 2: Fault Zone Tunnel
UK:23 October 2007...- Episode 3: Boot Camp
UK:30 October 2007...- Episode 4: World's Tallest Skyscraper
UK:6 November 2007...- Episode 5: Battle Machines
UK:13 November 2007...- Episode 6: Coaster Build Off
UK:20 November 2007...- Episode 7: Mountain of Steel
UK:27 November 2007...- Season 8
- Episode 1: City Center Las Vegas
USA:31 December 2008...- Episode 8: NASA
USA:26 June 2009...- Season
- Episode : Skyscraper at Sea
USA:15 April 2003...- Episode : City Center Las Vegas
USA:31 December 2008...- Episode : Ray of Sunshine
- Episode : Green Hits Home
Fukuyama Engineering
Cast
- Haruhiko Katô
- Hideaki Itô
- Toshiaki Karasawa
- Masami Hisamoto
- Yûsuke Santamaria
- Kôji Imada
- Issa Hentona
- Ryûji Harada
- Yôsuke Eguchi
- Shunsuke Nakamura
- Yoshihiko Hakamada
- Ai Iijima
- Takashi Kashiwabara
- Kenji Sakaguchi
- Season 1
-
Episode 1: (#1.1)
Japan:12 January 2002...
-
Episode 2: (#1.2)
Japan:19 January 2002...
-
Episode 3: Kakko ii gitâ
Japan:26 January 2002...
-
Episode 4: Kakko ii meishi ire
Japan:2 February 2002...
-
Episode 5: (#1.5)
Japan:9 February 2002...
-
Episode 6: (#1.6)
Japan:16 February 2002...
-
Episode 7: (#1.7)
Japan:23 February 2002...
-
Episode 8: (#1.8)
Japan:2 March 2002...
-
Episode 9: (#1.9)
Japan:9 March 2002...
-
Episode 10: (#1.10)
Japan:16 March 2002...
-
Episode 11: (#1.11)
Japan:23 March 2002...
-
Episode 12: (#1.12)
Japan:30 March 2002...
-
Episode 13: (#1.13)
Japan:6 April 2002...
-
Episode 14: (#1.14)
Japan:13 April 2002...
-
Episode 15: (#1.15)
Japan:20 April 2002...
-
Episode 16: (#1.16)
Japan:27 April 2002...
-
Episode 17: (#1.17)
Japan:4 May 2002...
-
Episode 18: (#1.18)
Japan:11 May 2002...
-
Episode 19: (#1.19)
Japan:18 May 2002...
-
Episode 20: (#1.20)
Japan:25 May 2002...
-
Episode 21: (#1.21)
Japan:1 June 2002...
-
Episode 22: (#1.22)
Japan:8 June 2002...
-
Episode 23: (#1.23)
Japan:15 June 2002...
-
Episode 24: (#1.24)
Japan:22 June 2002...
-
Episode 25: (#1.25)
Japan:29 June 2002...
-
Episode 26: (#1.26)
Japan:13 July 2002...
-
Episode 27: (#1.27)
Japan:20 July 2002...
-
Episode 28: (#1.28)
Japan:27 July 2002...
-
Episode 29: (#1.29)
Japan:3 August 2002...
-
Episode 30: (#1.30)
Japan:10 August 2002...
-
Episode 31: (#1.31)
Japan:17 August 2002...
-
Episode 32: (#1.32)
Japan:24 August 2002...
-
Episode 33: (#1.33)
Japan:31 August 2002...
-
Episode 34: (#1.34)
Japan:7 September 2002...
-
Episode 35: (#1.35)
Japan:21 September 2002...
- Season
-
Episode : (2002-09-28)
Japan:28 September 2002...
Engineering Connections
Cast
- Richard Hammond
- Stephen Ralphs
- Geraint Owen
- Gareth Hughes
- Denis Wingham
- Fernando Perez
- Hugh Hunt
- John Nutt
- Mark Skuse
- Nick Ralph
- Jeff Osborne
- Mike Wade
- Ken Mashkie
- Paul Hock
- Tod Todeschini
- Philip Rubini
- Peter Chandler
- Brenda Marsh
- Graham Taylor
- Jan Hauge
- Bob Freeman
- Derek Lea
- Alistair Lenczner
- Mark Hodgson
- Season 1
-
Episode 1: Airbus A380
UK...
-
Episode 2: Taipei Tower
UK...
-
Episode 3: Deep Space Observer
UK...
-
Episode 4: Super Rig
UK...
- Season 2
-
Episode 1: Wembley Stadium
Richard Hammond stands atop on the Wembley roof, in front of its record breaking arch to discover th...
-
Episode 2: Sydney Opera House
Richard Hammond climbs to the top of Sydney's iconic Opera House to unlock the Engineering Connectio...
-
Episode 3: HMS Illustrious
Richard Hammond unpicks the engineering DNA of the mighty aircraft carrier HMS Illustrious. A potent...
-
Episode 4: Guggenheim Bilbao
Richard Hammond visits a building described as the 'greatest of our time' - the Guggenheim Museum, B...
-
Episode 5: Millau Bridge
Richard Hammond reveals the engineering inspirations behind the tallest road bridge in the world - t...
-
Episode 6: Hong Kong Airport
Richard Hammond reveals the startling engineering connections behind Hong Kong's Ocean Airport, one ...
- Season 3
-
Episode 1: Burj Al Arab
UK...
-
Episode 2: Formula 1
UK...
-
Episode 3: Super Tanker
USA:2011...
-
Episode 4: The Earthquake-Proof Bridge
UK...
-
Episode 5: Space Shuttle
UK...
-
Episode 6: Bullet Train
UK...
- Season
-
Episode : Illustration of British AIrcraft- Li Earth
USA:1 March 2012...
karaoke
These things in my life
I've seen dreams in my head
Thats can destroy the way things work
I can't take it anymore just take it anyway
All of my life I've been kicked and beaten down
Thats how the engine lives sometimes
Now take it away
Caught in these days
Take my life away
caught in these days
No escape from the mad man
That keeps controlling my life
And all the things in my head
I can't take anymore just take it anyway
Always the same deal
More and more that I feel
It shows me what is real
Leave it all behind
So shoot and I'll die
We've got a problem
What is this shit
What is the problem
We're fuckin' you back.my quest is simple
a desire im trying to feed
ever since aware of myself
consciousness - just being there to bleed
eyesore for others - since the day i was born
i feel the guilt for being me
i feel the shame for being bron
i feel the engine
ive already begun to feel dead
if notfor the people that surround
i would drift away or fall apart
dissolve my being without a sound
the engine...the core..the focus of my world
occupying, fueling...uncoupling my two selfs to be heard
i know nobody
im known by none
non being
nothing to anyone
i have no passions
i have no friends
i need the engine
..to repent
...my only sin..to repent my only sin!!!!
...to...repent...
...to...repent...
im only me
the body
the engine!!!
tear down the body
dismantle my inner structure
destroy the shell that contains my soul
...my soul...
become the engineYo what's up, this is MC, uhhh im chillin at the track tryin to make some money call me back 213862620, you wanna get the hit?, gimmie a hit, bizza.
you have one new message
hey chris, its john bayie uhh, did you try and call me? casue i've been in the hospitol, in traction, they told me i fractured my liver? which i didnt even know you could do, anyway i still wanna do stuff on your record, uhh while i was on percodan i thought of a word that rhymes with engine so call me and i'll tell ya what it is, so yeah call me on my cell i'll uhh talk to ya later call me uhh bye.Still sufficient in depending on you - depending on each other.
Engine noise whispering through half asleep startled by
startled by headlights and loose, startled by loss pavement.
As Illinois goes rushing by, I'm too tired to even try.
Where will the sun come up, where will the sun come up for us today?
Turning bad days into better nights.
Waving smoke out the window, catch my hand against the background of night.
Dragging fingertips through constellations.
When we make the last turn
when we make the last turn for home we know half the battle is through.
Still sufficient in depending on you - depending on each other.
Engine noise whispering through.On a mission many a year
Single minded nothing to fear
I'd like to make one thing so clear
You don't want to get caught between the gears
This engine never dies
Overloaded this thing nearly flies
All those stories you thought they were lies
Overlook it and you're in for a big surprise
I feel the anger, feed the reaction
I feel the anger, feeding my engine
I know just what to do
I'll aim my engine right at you
It's my machine and it runs on pain
You don't drive it, it drives you insane
Don't really know what I hope to gain
Tears me apart and it puts me back together again
Living dream, where I've been
My machine, it's a trip like you've never seen
I feel the anger, feed the reaction
I feel the anger, feeding my engine
I know just what to doFor I am an engine
And I'm rolling on
Through endless revisions to say what i mean
For sweetness alone who flew out through the window
And landed back home in a garden of green
You're a riding alone in the back of steamer
And steaming yourself in the warm shower spray
And water rolls on off the round captain's belly
Who's talking to tigers from his cafeteria tray
And sweet babies cry for the cool taste of milking
That milky delight that invited us all
And if there's a taste in this life more inviting
Then wake up your windows and watch as the sweet babies crawlVERSE 1
Body like a billy coupe, I love it when she start that up. Put the key in the ignition, let me see you rev it up. {eh} you can drive slow, cruise control, you can speed it up. Now park that thang up over here and let me see it on the flo’.
BRIDGE
She say she won’t dance till the music turns on. She say she won’t dance till she get up in the zone…Turn them lights off, don’t turn them lights on, turn them lights off, don’t turn them lights on.
CHORUS
Girl just light yo engine up, just light that engine up. Girl just light yo engine up and go girl go. Start that engine up. {Ohhhhhhhhh….} Start that engine up {Ohhhhhhhhhhhh…}
Turn yo engine on, engine on; turn yo engine on. Turn yo engine on…engine, engine, engine on.
VERSE 2
She pull the pedal to the medal, burnin rubber when she takin off. Beep, Beep…toot that horn. Stop, reverse, and buckle up. Cause shawty movin fast, real fast like a Nas Car. She goin 120 miles per hour, now baby don’t pump them brakes or slow it down.
BRDIGE
She say she won’t dance till the music turns on. She say she won’t dance till she get up in the zone…Turn them lights off, don’t turn them lights on, turn them lights off, don’t turn them lights on.
CHORUS
Girl just light yo engine up, just light that engine up. Girl just light yo engine up and go girl go. Start that engine up. {Ohhhhhhhhh….} Start that engine up {Ohhhhhhhhhhhh…}
VERSE 3 {Not Mishon}
Now don’t you stop baby please shake. There will be no reason to re-place you; if you keep bendin, now start yo engine like a speed race. Now they out…but we gon’ get it in. I see you on the dance floor doin it wit yo friends but…I see you really wanna try do you, so imma walk away and let my swagg talk to you.
Swag talk to ya, I’m ochi. You movin, got this spotlight. I’m gonna be speed racer, start your engine; I need you to be my fire. So imma step back, gon’ give me room. Sweep you off yo feet, no broom. Zero to sixty and under two, seconds and I’m gone like voom now voom!
OUTRO
Girl just light yo engine up, just light that engine up. Girl just light yo engine up and go girl go. Start that engine up. {Ohhhhhhhhh….} Start that engine up {Ohhhhhhhhhhhh…}For I am an engine and I'm holding on.
The world is all bending and breaking from me.
But sweetness alone who flew out threw the window,
And landed back home in a garden of green.
You're riding alone in the back of a steamer,
And steaming yourself in the warm shower spray.
And water rolls on off the round captain's belly,
Who's talking to tigers from his cafeteria tray.
And sweet babies cry for the cool taste of milking,
That milky delight that invited us all.
And if there's a taste in this life more inviting,
Then wake up your windows and watch as the sweet babiesSend this Playlist by SMSEmail this Page
Rolls Royce Merlin static engine run- Order: Reorder
- Duration: 7:15
- Updated: 05 Nov 2012
Rolls Royce Merlin aircraft engine been run at the Classic Corvette weekend in Huntingdon 27/28th June 2009http://wn.com/Rolls_Royce_Merlin_static_engine_run
Rolls Royce Merlin aircraft engine been run at the Classic Corvette weekend in Huntingdon 27/28th June 2009
EXACTLY how a car engine works - 3D animation !- Order: Reorder
- Duration: 5:01
- Updated: 06 Nov 2012
Check this out it is so cool and exactly how an internal combustion engine works ! WOW www.autotechblog.comhttp://wn.com/EXACTLY_how_a_car_engine_works_3D_animation_!
Check this out it is so cool and exactly how an internal combustion engine works ! WOW www.autotechblog.com
- published: 09 Apr 2007
- views: 2331807
- author: autotechblog
World smallest V12 engine- Order: Reorder
- Duration: 9:26
- Updated: 07 Nov 2012
www.bringthecake.com Apparently the builder's name is Yesus Wilder and he only used three materials to build the engine. Stainless steel, aluminum, and bronze. All credits to him.http://wn.com/World_smallest_V12_engine
www.bringthecake.com Apparently the builder's name is Yesus Wilder and he only used three materials to build the engine. Stainless steel, aluminum, and bronze. All credits to him.
- published: 26 Nov 2011
- views: 1225843
- author: bringthecake
homemade jet engine- Order: Reorder
- Duration: 2:10
- Updated: 05 Nov 2012
homemade jet enginehttp://wn.com/homemade_jet_engine
homemade jet engine
- published: 27 Nov 2006
- views: 2453579
- author: walwal633
Tractorpulling insane engine blow up, Engine flys out of the tractor!- Order: Reorder
- Duration: 2:46
- Updated: 06 Nov 2012
Dutch team 'European Maid' blow up their engine after some experimetal tweaks on the engine. Only the pistons and turbos remain inside. THIS is the definition of blowing up your engine!http://wn.com/Tractorpulling_insane_engine_blow_up,_Engine_flys_out_of_the_tractor!
Dutch team 'European Maid' blow up their engine after some experimetal tweaks on the engine. Only the pistons and turbos remain inside. THIS is the definition of blowing up your engine!
- published: 09 Jan 2009
- views: 1652683
- author: alexs87
Ferrari V12 Engine- Order: Reorder
- Duration: 7:41
- Updated: 06 Nov 2012
Ferrari V12 Engine Assembly. From start to finish, one technician is responsible for the assembly........http://wn.com/Ferrari_V12_Engine
Ferrari V12 Engine Assembly. From start to finish, one technician is responsible for the assembly........
- published: 21 Feb 2008
- views: 3304342
- author: AutomotiveTv
Russian Rotary Vane Engine- Order: Reorder
- Duration: 3:19
- Updated: 06 Nov 2012
Rotary Vane Engine proposed to power Russian hybrid car 'ё мобиль' (Yo Mobile). babelfish.yahoo.comhttp://wn.com/Russian_Rotary_Vane_Engine
Rotary Vane Engine proposed to power Russian hybrid car 'ё мобиль' (Yo Mobile). babelfish.yahoo.com
- published: 20 Dec 2010
- views: 790516
- author: tupolev12
Working Model of Stephenson's STEAM ENGINE made of GLASS ! Rare!- Order: Reorder
- Duration: 2:17
- Updated: 06 Nov 2012
This Model of Stephenson's Steam Engine was made in 2008 by master glassblower Michal Zahradník. Highlights: * The crankshaft is glass. The piston is glass. The counterweight that makes the wheel spin evenly is glass. Imagine that everything is made out of glass. * There are no sealants used. All is accomplished by a perfectly snug fit. The gap between the piston and its compartment is so small, that the water that condensates from the steam seals it shut! * Notice the elaborate excessive steam exhaust system next to the piston. * The piston is the most arduous part to make due to to extreme level of precision needed. Its parts have to be so accurate that no machinery is of use here. The piston and its cylinder must be hand sanded to perfection, and they are very likely to crack in the process! On average, three out of four crack.http://wn.com/Working_Model_of_Stephenson's_STEAM_ENGINE_made_of_GLASS_!_Rare!
This Model of Stephenson's Steam Engine was made in 2008 by master glassblower Michal Zahradník. Highlights: * The crankshaft is glass. The piston is glass. The counterweight that makes the wheel spin evenly is glass. Imagine that everything is made out of glass. * There are no sealants used. All is accomplished by a perfectly snug fit. The gap between the piston and its compartment is so small, that the water that condensates from the steam seals it shut! * Notice the elaborate excessive steam exhaust system next to the piston. * The piston is the most arduous part to make due to to extreme level of precision needed. Its parts have to be so accurate that no machinery is of use here. The piston and its cylinder must be hand sanded to perfection, and they are very likely to crack in the process! On average, three out of four crack.
- published: 25 Nov 2010
- views: 1109427
- author: PhillForSale
Wright 3350 Radial Engine- Order: Reorder
- Duration: 2:20
- Updated: 05 Nov 2012
Wright 3350-26WD 3000hp 3350cubic inchhttp://wn.com/Wright_3350_Radial_Engine
Wright 3350-26WD 3000hp 3350cubic inch
- published: 21 Jun 2008
- views: 976461
- author: bobby8621
Rotary Engine- Order: Reorder
- Duration: 3:25
- Updated: 06 Nov 2012
This animation provides a basic understanding of how the Rotary Engine is put together and how it works. It was created with 3ds max, Cinema 4D and After Effects. Audio track used in this animation was purchased from APM Music: www.apmmusic.com Please visit my website for more 3D work: www.mattrittman.comhttp://wn.com/Rotary_Engine
This animation provides a basic understanding of how the Rotary Engine is put together and how it works. It was created with 3ds max, Cinema 4D and After Effects. Audio track used in this animation was purchased from APM Music: www.apmmusic.com Please visit my website for more 3D work: www.mattrittman.com
- published: 07 May 2008
- views: 4720570
- author: Matt Rittman
Homemade Stirling Engine- Order: Reorder
- Duration: 1:53
- Updated: 06 Nov 2012
A Stirling engine is a heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. Like the steam engine, the Stirling engine is traditionally classified as an external combustion engine, as all heat transfers to and from the working fluid take place through the engine wall. This contrasts with an internal combustion engine where heat input is by combustion of a fuel within the body of the working fluid. Unlike a steam engine's (or more generally a Rankine cycle engine's) usage of a working fluid in both its liquid and gaseous phases, the Stirling engine encloses a fixed quantity of permanently gaseous fluid such as air. Typical of heat engines, the general cycle consists of compressing cool gas, heating the gas, expanding the hot gas, and finally cooling the gas before repeating the cycle. The efficiency of the process is narrowly restricted by the efficiency of the Carnot cycle, which depends on the temperature difference between the hot and cold reservoir. Originally conceived in 1816 as an industrial prime mover to rival the steam engine, its practical use was largely confined to low-power domestic applications for over a century. The Stirling engine is noted for its high efficiency compared to steam engines, quiet operation, and the ease with which it can use almost any heat source. This compatibility with alternative and ...http://wn.com/Homemade_Stirling_Engine
A Stirling engine is a heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. Like the steam engine, the Stirling engine is traditionally classified as an external combustion engine, as all heat transfers to and from the working fluid take place through the engine wall. This contrasts with an internal combustion engine where heat input is by combustion of a fuel within the body of the working fluid. Unlike a steam engine's (or more generally a Rankine cycle engine's) usage of a working fluid in both its liquid and gaseous phases, the Stirling engine encloses a fixed quantity of permanently gaseous fluid such as air. Typical of heat engines, the general cycle consists of compressing cool gas, heating the gas, expanding the hot gas, and finally cooling the gas before repeating the cycle. The efficiency of the process is narrowly restricted by the efficiency of the Carnot cycle, which depends on the temperature difference between the hot and cold reservoir. Originally conceived in 1816 as an industrial prime mover to rival the steam engine, its practical use was largely confined to low-power domestic applications for over a century. The Stirling engine is noted for its high efficiency compared to steam engines, quiet operation, and the ease with which it can use almost any heat source. This compatibility with alternative and ...
- published: 09 Mar 2012
- views: 835306
- author: Sawerrt
Open Engine Model A Ford- Order: Reorder
- Duration: 4:13
- Updated: 05 Nov 2012
1929 Ford Model A Open Runner Engine Display. The first thing you will notice is that the engine is on it's side to give a semi-full view of it's moving parts. Next you will see the distributor has been moved upright to give a better view of the pistons and valves. The 4th cylinder is the only working part of the engine. Bearings and pistons are lubricated with grease and oil. Run times are short due to overheating. There is no cooling other than a few holes drilled into the waterjacket by the exhaust. Yes, I could have made it water-cooled, but it's the start-up that makes the show! Thanks to Lee Bottensek, Art Hoppe, and Joe Thorn of MetalCrafters (www.metalcraftersinc.org) for their donations towards this project.http://wn.com/Open_Engine_Model_A_Ford
1929 Ford Model A Open Runner Engine Display. The first thing you will notice is that the engine is on it's side to give a semi-full view of it's moving parts. Next you will see the distributor has been moved upright to give a better view of the pistons and valves. The 4th cylinder is the only working part of the engine. Bearings and pistons are lubricated with grease and oil. Run times are short due to overheating. There is no cooling other than a few holes drilled into the waterjacket by the exhaust. Yes, I could have made it water-cooled, but it's the start-up that makes the show! Thanks to Lee Bottensek, Art Hoppe, and Joe Thorn of MetalCrafters (www.metalcraftersinc.org) for their donations towards this project.
- published: 26 Jul 2010
- views: 124552
- author: UncleBarn1
Engine rebuild part 1- Order: Reorder
- Duration: 8:46
- Updated: 05 Nov 2012
We are rebuilding a GM 350 5.7 engine. Now in this particular case we are also going to upgrade the engine to a 383 6.0 This is called building a "stroker" motor. In other words we are increasing the "stroke" of the engine which increased the torq & horsepower. If you are able & wanting to rebuild an engine, this video should give you a good overview of what to do. If you are having someone else build an engine for you, you will be able to see what's involved in the processhttp://wn.com/Engine_rebuild_part_1
We are rebuilding a GM 350 5.7 engine. Now in this particular case we are also going to upgrade the engine to a 383 6.0 This is called building a "stroker" motor. In other words we are increasing the "stroke" of the engine which increased the torq & horsepower. If you are able & wanting to rebuild an engine, this video should give you a good overview of what to do. If you are having someone else build an engine for you, you will be able to see what's involved in the process
- published: 15 Aug 2010
- views: 352355
- author: realfixesrealfast
Extreme Elco Engine Swap! - Roadkill Episode 4- Order: Reorder
- Duration: 21:49
- Updated: 06 Nov 2012
On this episode of Roadkill, David Freiburger, Mike Finnegan and a carsick dog drive a '69 El Camino 500 miles from home (on seven cylinders) to change an engine in the parking lot of Summit Racing. The story goes that Finnegan's wife's grandfather bought this1969 Chevy El Camino brand new, and it's been passed down through the family, finally to her. It's a solid car, and the suspension has been hopped up, but the all-original 350 engine was smoking like a freight train. That didn't stop the guys from limping it from Los Angeles, California to Sparks, Nevada, where Summit Racing has a fully-stocked warehouse. Summit sells every speed part and replacement part on Earth, including the 420hp, 383ci crate engine, so the logic was that the guys would save time on the engine swap because they could walk right into the store instead of driving to a parts store multiple times, as they would have back home. So how long will it take a couple gearheads to change an engine outside in a snow flurry? Will the EPA shut them down before they can finish? And what happens when you let a carsick dog ride shotgun? Watch to find out! Roadkill appears every fourth Friday on the new Motor Trend channel. www.youtube.com Subscribe now to make sure you're in on all the action! www.youtube.com Facebook - facebook.com & facebook.com Twitter - twitter.com Google+ - plus.google.com Website - www.motortrend.com & httphttp://wn.com/Extreme_Elco_Engine_Swap!_Roadkill_Episode_4
On this episode of Roadkill, David Freiburger, Mike Finnegan and a carsick dog drive a '69 El Camino 500 miles from home (on seven cylinders) to change an engine in the parking lot of Summit Racing. The story goes that Finnegan's wife's grandfather bought this1969 Chevy El Camino brand new, and it's been passed down through the family, finally to her. It's a solid car, and the suspension has been hopped up, but the all-original 350 engine was smoking like a freight train. That didn't stop the guys from limping it from Los Angeles, California to Sparks, Nevada, where Summit Racing has a fully-stocked warehouse. Summit sells every speed part and replacement part on Earth, including the 420hp, 383ci crate engine, so the logic was that the guys would save time on the engine swap because they could walk right into the store instead of driving to a parts store multiple times, as they would have back home. So how long will it take a couple gearheads to change an engine outside in a snow flurry? Will the EPA shut them down before they can finish? And what happens when you let a carsick dog ride shotgun? Watch to find out! Roadkill appears every fourth Friday on the new Motor Trend channel. www.youtube.com Subscribe now to make sure you're in on all the action! www.youtube.com Facebook - facebook.com & facebook.com Twitter - twitter.com Google+ - plus.google.com Website - www.motortrend.com & http
- published: 11 May 2012
- views: 291713
- author: MotorTrend
Construction of W16 engine- Order: Reorder
- Duration: 5:18
- Updated: 06 Nov 2012
Volkswagen Aktiengesellschaft's Salzgitter Engine Plant.This is where all W8's, W12's, W12 Twin Turbo's and W16 Quad Turbo's are made.http://wn.com/Construction_of_W16_engine
Volkswagen Aktiengesellschaft's Salzgitter Engine Plant.This is where all W8's, W12's, W12 Twin Turbo's and W16 Quad Turbo's are made.
- published: 24 May 2007
- views: 976742
- author: katuwad
Flat Head V8 Running Miniature Model Engine - Block is Only 7" Long!- Order: Reorder
- Duration: 4:42
- Updated: 03 Nov 2012
Please visit www.ministeam.com SORRY THIS ENGINE HAS SOLD OUT. ONLY 10 WERE MADE IN WHAT IS LIKELY THE LAST BATCH THIS MACHINIST WILL MAKE. This is a working model of a Flat Head V8. The engine overall length is only 15 inches. The block measures only 7 inches. The Engine is 10 inches tall and 7 1 inches wide. This engine is hand machined by a master machinist.http://wn.com/Flat_Head_V8_Running_Miniature_Model_Engine_Block_is_Only_7_Long!
Please visit www.ministeam.com SORRY THIS ENGINE HAS SOLD OUT. ONLY 10 WERE MADE IN WHAT IS LIKELY THE LAST BATCH THIS MACHINIST WILL MAKE. This is a working model of a Flat Head V8. The engine overall length is only 15 inches. The block measures only 7 inches. The Engine is 10 inches tall and 7 1 inches wide. This engine is hand machined by a master machinist.
- published: 22 Jan 2011
- views: 85511
- author: ministeamcom
Engine Who- Order: Reorder
- Duration: 7:14
- Updated: 03 Nov 2012
The music video that came with Percy Runs Away, now in the highest quality available for YouTube.http://wn.com/Engine_Who
The music video that came with Percy Runs Away, now in the highest quality available for YouTube.
- published: 25 Oct 2006
- views: 60242
- author: Daemaus
How A Jet Engine Works- Order: Reorder
- Duration: 9:31
- Updated: 06 Nov 2012
How a jet engine or gas turbine works.http://wn.com/How_A_Jet_Engine_Works
How a jet engine or gas turbine works.
- published: 12 Jun 2007
- views: 1743132
- author: jannej312
11 Months, 3000 pictures and a lot of coffee.- Order: Reorder
- Duration: 2:22
- Updated: 06 Nov 2012
Started out as just a collection of snaps as I stripped down an engine bought off ebay. (To replace my old engine, which had suffered catastrophic failure). The snaps were so that I remembered how everything went, so I could put it back together again. Then I realised it'd be quite cool to make it an animation. found some suitable music, rekindled my ancient knowledge of Premiere, storyboarded it, shot it as I worked on the engine (my poor DSLR got covered in engine oil), this was the result. The music is "In The Hall Of The Mountain King" from Edvard Griegs "Peer Gynt Suite" I own a suitable license for this piece of music, supplied by Chris Worth Productionshttp://wn.com/11_Months,_3000_pictures_and_a_lot_of_coffee
Started out as just a collection of snaps as I stripped down an engine bought off ebay. (To replace my old engine, which had suffered catastrophic failure). The snaps were so that I remembered how everything went, so I could put it back together again. Then I realised it'd be quite cool to make it an animation. found some suitable music, rekindled my ancient knowledge of Premiere, storyboarded it, shot it as I worked on the engine (my poor DSLR got covered in engine oil), this was the result. The music is "In The Hall Of The Mountain King" from Edvard Griegs "Peer Gynt Suite" I own a suitable license for this piece of music, supplied by Chris Worth Productions
- published: 12 Jun 2012
- views: 2781329
- author: nothinghereok
Wooden air engine- Order: Reorder
- Duration: 1:43
- Updated: 06 Nov 2012
woodgears.ca My wooden steam engine model, running off a vacuum cleaner. For more about this engine, click the link.http://wn.com/Wooden_air_engine
woodgears.ca My wooden steam engine model, running off a vacuum cleaner. For more about this engine, click the link.
- published: 23 Feb 2009
- views: 1663651
- author: Matthias Wandel
V 12 Modellmotor RC Engine the original Video !- Order: Reorder
- Duration: 2:24
- Updated: 05 Nov 2012
-Testrun- this is the original Video from the owner;topspeed 6000RPM;6-8 HP--87 ccm -has got the whole Engine for further Information please go to my websitte - www.artus-motor.com - I do read all your coments - thank Youhttp://wn.com/V_12_Modellmotor_RC_Engine_the_original_Video_!
-Testrun- this is the original Video from the owner;topspeed 6000RPM;6-8 HP--87 ccm -has got the whole Engine for further Information please go to my websitte - www.artus-motor.com - I do read all your coments - thank You
- published: 04 Mar 2007
- views: 18512170
- author: boxermotorrad
AWESOME ENGINE ANIMATION....- Order: Reorder
- Duration: 5:43
- Updated: 06 Nov 2012
THIS IS A WONDERFUL ANIMATION ON HOW AN IC ENGINE WORKS..FROM FORD DESIGN TEAM...http://wn.com/AWESOME_ENGINE_ANIMATION
THIS IS A WONDERFUL ANIMATION ON HOW AN IC ENGINE WORKS..FROM FORD DESIGN TEAM...
- published: 12 May 2007
- views: 1079890
- author: chaitanya9187
Stopped engine aerobatics- Order: Reorder
- Duration: 2:55
- Updated: 05 Nov 2012
old documentary featuring a WW2 veterant and a twin engine aircrafthttp://wn.com/Stopped_engine_aerobatics
old documentary featuring a WW2 veterant and a twin engine aircraft
- published: 06 Feb 2006
- views: 2004573
- author: skoey
Send this Playlist by SMSEmail this Page
0001 Unity (Intro)- Order: Reorder
- Duration: 1:59
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0001_Unity_Intro
Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 9379
- author: cannedmushrooms
0002 Unity (where to get Unity)- Order: Reorder
- Duration: 3:47
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0002_Unity_where_to_get_Unity
Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 4672
- author: cannedmushrooms
0003 Unity (Navigation)- Order: Reorder
- Duration: 4:27
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0003_Unity_Navigation
Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 6125
- author: cannedmushrooms
0004 Unity (thinking outside the box)- Order: Reorder
- Duration: 8:35
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0004_Unity_thinking_outside_the_box
Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 8677
- author: cannedmushrooms
0005 Unity (1 to 1 scale)- Order: Reorder
- Duration: 6:41
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0005_Unity_1_to_1_scale
Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 4927
- author: cannedmushrooms
0006 Unity (Material vs texture)- Order: Reorder
- Duration: 5:04
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0006_Unity_Material_vs_texture
Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 6643
- author: cannedmushrooms
0007 Unity (details)- Order: Reorder
- Duration: 6:42
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0007_Unity_details
Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 4366
- author: cannedmushrooms
0008 Unity (Why bricks)- Order: Reorder
- Duration: 6:57
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0008_Unity_Why_bricks
Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 3525
- author: cannedmushrooms
0009 Unity (easy tile bricks)- Order: Reorder
- Duration: 7:02
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0009_Unity_easy_tile_bricks
Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 2804
- author: cannedmushrooms
0010 Unity (size matters)- Order: Reorder
- Duration: 9:53
- Updated: 01 Jan 1970
Learning the Unity Game Enginehttp://wn.com/0010_Unity_size_matters
Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 3137
- author: cannedmushrooms
0011 Unity (UVs vs tile)- Order: Reorder
- Duration: 4:58
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0011_Unity_UVs_vs_tile
Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 2721
- author: cannedmushrooms
0012 Unity (building a room)- Order: Reorder
- Duration: 9:43
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0012_Unity_building_a_room
Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 5976
- author: cannedmushrooms
0013 Unity (texture scale)- Order: Reorder
- Duration: 7:58
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0013_Unity_texture_scale
Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 4315
- author: cannedmushrooms
0014 Unity (one Room School house)- Order: Reorder
- Duration: 5:33
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0014_Unity_one_Room_School_house
Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 2901
- author: cannedmushrooms
0015 Assignment1- Order: Reorder
- Duration: 0:54
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0015_Assignment1
Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 1907
- author: cannedmushrooms
0016 Unity (Texture Workflow 2)- Order: Reorder
- Duration: 6:18
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0016_Unity_Texture_Workflow_2
Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 3389
- author: cannedmushrooms
0017 Unity (Baked textures)- Order: Reorder
- Duration: 5:30
- Updated: 01 Jan 1970
Learn the Unity Game Enginehttp://wn.com/0017_Unity_Baked_textures
Learn the Unity Game Engine
- published: 15 Nov 2009
- views: 3348
- author: cannedmushrooms
0018 Unity (Building a new Project)- Order: Reorder
- Duration: 4:26
- Updated: 01 Jan 1970
learning the Unity Game Enginehttp://wn.com/0018_Unity_Building_a_new_Project
learning the Unity Game Engine
- published: 15 Nov 2009
- views: 1958
- author: cannedmushrooms
0019 Unity (Terrain)- Order: Reorder
- Duration: 4:17
- Updated: 01 Jan 1970
learning the Unity Game Enginehttp://wn.com/0019_Unity_Terrain
learning the Unity Game Engine
- published: 15 Nov 2009
- views: 4185
- author: cannedmushrooms
0020 Unity (New Player)- Order: Reorder
- Duration: 2:27
- Updated: 01 Jan 1970
learning the Unity Game Enginehttp://wn.com/0020_Unity_New_Player
learning the Unity Game Engine
- published: 15 Nov 2009
- views: 2683
- author: cannedmushrooms
0021 Unity (Decompile)- Order: Reorder
- Duration: 3:31
- Updated: 01 Jan 1970
learning the Unity Game Enginehttp://wn.com/0021_Unity_Decompile
learning the Unity Game Engine
- published: 15 Nov 2009
- views: 4131
- author: cannedmushrooms
0022 Unity (Learning Community)- Order: Reorder
- Duration: 5:11
- Updated: 01 Jan 1970
learning the Unity Game Enginehttp://wn.com/0022_Unity_Learning_Community
learning the Unity Game Engine
- published: 15 Nov 2009
- views: 1855
- author: cannedmushrooms
0023 Unity (Small Goals)- Order: Reorder
- Duration: 2:37
- Updated: 01 Jan 1970
learning the Unity Game Enginehttp://wn.com/0023_Unity_Small_Goals
learning the Unity Game Engine
- published: 16 Nov 2009
- views: 2780
- author: cannedmushrooms
Send this Playlist by SMSEmail this Page
Tile Engine Tutorial Episode 1, Pt 1/2- Order: Reorder
- Duration: 9:49
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_1,_Pt_1_2
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 19302
- author: Nick Gravelyn
Tile Engine Tutorial Episode 1, Pt 2 / 2- Order: Reorder
- Duration: 9:37
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_1,_Pt_2_2
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 6901
- author: Nick Gravelyn
Tile Engine Tutorial Episode 2, Pt 1 / 3- Order: Reorder
- Duration: 9:52
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_2,_Pt_1_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 4653
- author: Nick Gravelyn
Tile Engine Tutorial Episode 2, Pt 2 / 3- Order: Reorder
- Duration: 8:11
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_2,_Pt_2_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 6446
- author: Nick Gravelyn
Tile Engine Tutorial Episode 2, Pt 3 / 3- Order: Reorder
- Duration: 7:25
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_2,_Pt_3_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 3450
- author: Nick Gravelyn
Tile Engine Tutorial Episode 3A, Part 1 / 3- Order: Reorder
- Duration: 9:35
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_3A,_Part_1_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 4528
- author: Nick Gravelyn
Tile Engine Tutorial Episode 3A, Part 2 / 3- Order: Reorder
- Duration: 9:27
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_3A,_Part_2_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 3568
- author: Nick Gravelyn
Tile Engine Tutorial Episode 3A, Part 3 / 3- Order: Reorder
- Duration: 7:52
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube. Project Download: http://dl.nickgravelyn.com/?TileEngine03a.ziphttp://wn.com/Tile_Engine_Tutorial_Episode_3A,_Part_3_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube. Project Download: http://dl.nickgravelyn.com/?TileEngine03a.zip
- published: 13 Feb 2010
- views: 3222
- author: Nick Gravelyn
Tile Engine Tutorial Episode 3B, Part 1 / 3- Order: Reorder
- Duration: 9:05
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube. Project Download: http://dl.nickgravelyn.com/?TileEngine03b.ziphttp://wn.com/Tile_Engine_Tutorial_Episode_3B,_Part_1_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube. Project Download: http://dl.nickgravelyn.com/?TileEngine03b.zip
- published: 13 Feb 2010
- views: 4181
- author: Nick Gravelyn
Tile Engine Tutorial Episode 3B, Part 2 / 3- Order: Reorder
- Duration: 8:21
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_3B,_Part_2_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2753
- author: Nick Gravelyn
Tile Engine Tutorial Episode 3B, Part 3 / 3- Order: Reorder
- Duration: 10:16
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_3B,_Part_3_3
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2375
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4A, Part 1 / 4- Order: Reorder
- Duration: 9:23
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4A,_Part_1_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 3699
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4A, Part 2 / 4- Order: Reorder
- Duration: 9:30
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4A,_Part_2_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2512
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4A, Part 3 / 4- Order: Reorder
- Duration: 9:13
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4A,_Part_3_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2215
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4A, Part 4 / 4- Order: Reorder
- Duration: 7:57
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4A,_Part_4_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2319
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4B, Part 1 / 4- Order: Reorder
- Duration: 8:59
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4B,_Part_1_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2055
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4B, Part 2 / 4- Order: Reorder
- Duration: 8:57
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4B,_Part_2_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1661
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4B, Part 3 / 4- Order: Reorder
- Duration: 9:20
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4B,_Part_3_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1554
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4B, Part 4 / 4- Order: Reorder
- Duration: 6:28
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4B,_Part_4_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1376
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4C, Part 1 / 4- Order: Reorder
- Duration: 8:53
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4C,_Part_1_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1903
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4C, Part 2 / 4- Order: Reorder
- Duration: 9:02
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4C,_Part_2_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1516
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4C, Part 3 / 4- Order: Reorder
- Duration: 9:13
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4C,_Part_3_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1335
- author: Nick Gravelyn
Tile Engine Tutorial Episode 4C, Part 4 / 4- Order: Reorder
- Duration: 6:29
- Updated: 01 Jan 1970
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.http://wn.com/Tile_Engine_Tutorial_Episode_4C,_Part_4_4
An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1117
- author: Nick Gravelyn
Send this Playlist by SMSEmail this Page
Model Stickney Hit & Miss Engine First Run.- Order: Reorder
- Duration: 1:34
- Updated: 01 Jan 1970
This is the engine I have been building since Metal Casting at Home video part 10. Ready for painting and mounting on hardwood base.http://wn.com/Model_Stickney_Hit_Miss_Engine_First_Run
This is the engine I have been building since Metal Casting at Home video part 10. Ready for painting and mounting on hardwood base.
- published: 02 Dec 2011
- views: 104351
- author: myfordboy
Model Monitor Hit and Miss Engine.- Order: Reorder
- Duration: 1:44
- Updated: 01 Jan 1970
Model engine made in my workshop from my own castings. See Metal Casting at Home series of videos to see how they were made.http://wn.com/Model_Monitor_Hit_and_Miss_Engine
Model engine made in my workshop from my own castings. See Metal Casting at Home series of videos to see how they were made.
- published: 02 Dec 2011
- views: 16052
- author: myfordboy
Brockway and Philips Hot Air Fan- Order: Reorder
- Duration: 1:31
- Updated: 01 Jan 1970
Home built replica engine. Dimentions taken from patent application drawings. Scale- full size.http://wn.com/Brockway_and_Philips_Hot_Air_Fan
Home built replica engine. Dimentions taken from patent application drawings. Scale- full size.
- published: 02 Dec 2011
- views: 42714
- author: myfordboy
Domestic Hit & Miss Engine Model- Order: Reorder
- Duration: 0:44
- Updated: 01 Jan 1970
Home built half size model . Built from my own castings.http://wn.com/Domestic_Hit_Miss_Engine_Model
Home built half size model . Built from my own castings.
- published: 02 Dec 2011
- views: 12432
- author: myfordboy
Model Aermotor Hit & Miss 8 Cycle Engine- Order: Reorder
- Duration: 1:53
- Updated: 01 Jan 1970
Half size model engine. Built from my own castings. Measurements taken from full size engine.http://wn.com/Model_Aermotor_Hit_Miss_8_Cycle_Engine
Half size model engine. Built from my own castings. Measurements taken from full size engine.
- published: 02 Dec 2011
- views: 71941
- author: myfordboy
Ky-Ko type Hot Air Fan- Order: Reorder
- Duration: 2:08
- Updated: 01 Jan 1970
Half size model fan powered by lamp oilhttp://wn.com/Ky-Ko_type_Hot_Air_Fan
Half size model fan powered by lamp oil
- published: 02 Dec 2011
- views: 26173
- author: myfordboy
New Holland Hit and Miss Model Engine- Order: Reorder
- Duration: 1:02
- Updated: 01 Jan 1970
1/3 scale model running on butane gas. Built from my own castings.http://wn.com/New_Holland_Hit_and_Miss_Model_Engine
1/3 scale model running on butane gas. Built from my own castings.
- published: 02 Dec 2011
- views: 21206
- author: myfordboy
Sugg Hot Air Engine. Model.- Order: Reorder
- Duration: 0:51
- Updated: 01 Jan 1970
Robinson variant fitted with compressor to increase gas pressure in pipeline.http://wn.com/Sugg_Hot_Air_Engine_Model
Robinson variant fitted with compressor to increase gas pressure in pipeline.
- published: 02 Dec 2011
- views: 69221
- author: myfordboy
Essex Hot Air Engine.Stirling Cycle- Order: Reorder
- Duration: 1:57
- Updated: 01 Jan 1970
Replica engine built in my workshop from my own castings.http://wn.com/Essex_Hot_Air_EngineStirling_Cycle
Replica engine built in my workshop from my own castings.
- published: 02 Dec 2011
- views: 40496
- author: myfordboy
Essex Hot Air Fan- Order: Reorder
- Duration: 2:55
- Updated: 01 Jan 1970
Home built replica engine from my own castings. In this design the upper casting is the power cylinder. The power piston is hollow and has the hot cap connected to it. The displacer travels inside the piston/ hot cap assembly. The displacer is driven by the crank in the centre of the cylinder. The power piston connecting rod is attached to the outside of the hot cap and is connected to the crank at the back of the engine. The hot cap moves in and out of the flame. Unusual arrangement but it works very well . It is quite a powerfull engine.http://wn.com/Essex_Hot_Air_Fan
Home built replica engine from my own castings. In this design the upper casting is the power cylinder. The power piston is hollow and has the hot cap connected to it. The displacer travels inside the piston/ hot cap assembly. The displacer is driven by the crank in the centre of the cylinder. The power piston connecting rod is attached to the outside of the hot cap and is connected to the crank at the back of the engine. The hot cap moves in and out of the flame. Unusual arrangement but it works very well . It is quite a powerfull engine.
- published: 02 Dec 2011
- views: 49832
- author: myfordboy
Stirling Cycle Engine from Tin cans- Order: Reorder
- Duration: 1:29
- Updated: 01 Jan 1970
I designed the engine to see how simple one could be made from easily avaiable items. A lathe is not essential can be made with hand tools and drill.Plans and instructions are available from me.http://wn.com/Stirling_Cycle_Engine_from_Tin_cans
I designed the engine to see how simple one could be made from easily avaiable items. A lathe is not essential can be made with hand tools and drill.Plans and instructions are available from me.
- published: 02 Dec 2011
- views: 58497
- author: myfordboy
Wall mounted Hot Air Fan Motor, Stirling Cycle. Anderson , Erickson & Wickstrom- Order: Reorder
- Duration: 1:29
- Updated: 01 Jan 1970
I made this some time ago. It was made with reference to a patent drawing of 1900. I am not sure if these were ever made but my replica works well. No castings were used on this engine all the parts have been fabricated.http://wn.com/Wall_mounted_Hot_Air_Fan_Motor,_Stirling_Cycle_Anderson_,_Erickson_Wickstrom
I made this some time ago. It was made with reference to a patent drawing of 1900. I am not sure if these were ever made but my replica works well. No castings were used on this engine all the parts have been fabricated.
- published: 02 Dec 2011
- views: 11107
- author: myfordboy
Easy to Build Stirling Engine Part 2 Alternative Displacer.- Order: Reorder
- Duration: 6:08
- Updated: 01 Jan 1970
A few E Z Stirling builders have emailed me and asked what they can use for a displacer as balsa wood is unobtainable where the live. Here is a an alternative construction which works just as well although more care is needed in it's construction. More details at myfordboy.blogspot.com Watch in 1080phttp://wn.com/Easy_to_Build_Stirling_Engine_Part_2_Alternative_Displacer
A few E Z Stirling builders have emailed me and asked what they can use for a displacer as balsa wood is unobtainable where the live. Here is a an alternative construction which works just as well although more care is needed in it's construction. More details at myfordboy.blogspot.com Watch in 1080p
- published: 13 Mar 2012
- views: 22318
- author: myfordboy
Easy to Build Stirling Cycle Engine. Free Plans, Hot Air- Order: Reorder
- Duration: 32:54
- Updated: 01 Jan 1970
This engine could be built by anyone with basic craft skills and uses easy to obtain materials. Video shows the full build. For a free plan and detailed instructions visit myfordboy.blogspot.com See also part 2 of this video for alternative construction method.http://wn.com/Easy_to_Build_Stirling_Cycle_Engine_Free_Plans,_Hot_Air
This engine could be built by anyone with basic craft skills and uses easy to obtain materials. Video shows the full build. For a free plan and detailed instructions visit myfordboy.blogspot.com See also part 2 of this video for alternative construction method.
- published: 14 Mar 2012
- views: 248797
- author: myfordboy
Send this Playlist by SMSEmail this Page
Volkswagen W8 engine- Order: Reorder
- Duration: 0:27
- Updated: 01 Jan 1970
Animation of an W8 enginehttp://wn.com/Volkswagen_W8_engine
Animation of an W8 engine
- published: 07 Aug 2008
- views: 603964
- author: VEYR16W
Bugatti Veyron W16 drawn and simulated in Autodesk Inventor- Order: Reorder
- Duration: 0:34
- Updated: 01 Jan 1970
[CLICK UNDER THE VIDEO TO WATCH IT IN HIGH QUALITY !] It was a project for school ( HBO Autotechniek Rotterdam, Bachelor ) It was hard to find any technical information but after a lot of calculations, searching and contacting people... I finally had all the measures so I could start drawing. It's a Bugatti W16.4 Engine 16 cylinders 8 Liter 4 Turbo's 64 valves 1001 HP Top Speed 407,1 km/h Author: Lennart van den Doelhttp://wn.com/Bugatti_Veyron_W16_drawn_and_simulated_in_Autodesk_Inventor
[CLICK UNDER THE VIDEO TO WATCH IT IN HIGH QUALITY !] It was a project for school ( HBO Autotechniek Rotterdam, Bachelor ) It was hard to find any technical information but after a lot of calculations, searching and contacting people... I finally had all the measures so I could start drawing. It's a Bugatti W16.4 Engine 16 cylinders 8 Liter 4 Turbo's 64 valves 1001 HP Top Speed 407,1 km/h Author: Lennart van den Doel
- published: 07 Aug 2008
- views: 637644
- author: VEYR16W
Bugatti Veyron engine 1001 hp production- Order: Reorder
- Duration: 2:46
- Updated: 01 Jan 1970
production video of the Bugatti Veyron 1001HP engine more Video's at www.AMT.nlhttp://wn.com/Bugatti_Veyron_engine_1001_hp_production
production video of the Bugatti Veyron 1001HP engine more Video's at www.AMT.nl
- published: 07 Aug 2008
- views: 177609
- author: VEYR16W
Fastest Car Ever- Order: Reorder
- Duration: 0:22
- Updated: 01 Jan 1970
The fastest road car in the world is the Bugatti Veyron. It has a W16 engine, with 4 turbos and 10 radiators, as well as much more. enjoy!http://wn.com/Fastest_Car_Ever
The fastest road car in the world is the Bugatti Veyron. It has a W16 engine, with 4 turbos and 10 radiators, as well as much more. enjoy!
- published: 07 Aug 2008
- views: 157674
- author: VEYR16W
Bugatti Veyron Motor w16.4 (testet by Autobild.de)- Order: Reorder
- Duration: 4:37
- Updated: 01 Jan 1970
Bugatti Veyron Motor w16.4 (testet by Autobild.de)http://wn.com/Bugatti_Veyron_Motor_w164_testet_by_Autobildde
Bugatti Veyron Motor w16.4 (testet by Autobild.de)
- published: 07 Aug 2008
- views: 32349
- author: VEYR16W
VW Phaeton W12 6.0 ENGINE- Order: Reorder
- Duration: 0:33
- Updated: 01 Jan 1970
Engine of VW in the 2004 Phaeton, a 6.0 litre W12-Engine with 420 HP and 560 NM!http://wn.com/VW_Phaeton_W12_60_ENGINE
Engine of VW in the 2004 Phaeton, a 6.0 litre W12-Engine with 420 HP and 560 NM!
- published: 07 Aug 2008
- views: 142001
- author: VEYR16W
Bugatti Veyron engine W16- Order: Reorder
- Duration: 5:05
- Updated: 01 Jan 1970
Bugatti Enginehttp://wn.com/Bugatti_Veyron_engine_W16
Bugatti Engine
- published: 07 Aug 2008
- views: 109127
- author: VEYR16W
Bugatti Veyron in the rain - great engine sounds at tailpipe- Order: Reorder
- Duration: 3:20
- Updated: 01 Jan 1970
Bugatti Veyron in the rain at Crystal Cove on 4/1/06. Incredible engine sounds at the tailpipe! http://crystalcovecarshow.blogspot.comhttp://wn.com/Bugatti_Veyron_in_the_rain_great_engine_sounds_at_tailpipe
Bugatti Veyron in the rain at Crystal Cove on 4/1/06. Incredible engine sounds at the tailpipe! http://crystalcovecarshow.blogspot.com
- published: 07 Aug 2008
- views: 1466506
- author: VEYR16W
Construction of The Bugatti W16 engine- Order: Reorder
- Duration: 5:19
- Updated: 01 Jan 1970
Volkswagen Aktiengesellschaft's Salzgitter Enginehttp://wn.com/Construction_of_The_Bugatti_W16_engine
Volkswagen Aktiengesellschaft's Salzgitter Engine
- published: 07 Aug 2008
- views: 54332
- author: VEYR16W
Autodesk Inventor - Radial Engine- Order: Reorder
- Duration: 0:20
- Updated: 01 Jan 1970
This animation was created in Autodesk Inventor using Inventor Studio. Thanks to Diemaker for the dataset.http://wn.com/Autodesk_Inventor_Radial_Engine
This animation was created in Autodesk Inventor using Inventor Studio. Thanks to Diemaker for the dataset.
- published: 07 Aug 2008
- views: 702059
- author: VEYR16W
F1 Engine Autodesk CAD- Order: Reorder
- Duration: 1:58
- Updated: 01 Jan 1970
I did this my senior year of high school using Autodesk Inventor. I now go to Illinois State University and am a sophomore. If you would like to contact me my E-mail is jdwhite@ilstu.edu . Or click HERE (file:///J:/WWW/2010SP/JDW/jdw-p1.htm) for a link to my current school web page, which I update weekly. Thanks!http://wn.com/F1_Engine_Autodesk_CAD
I did this my senior year of high school using Autodesk Inventor. I now go to Illinois State University and am a sophomore. If you would like to contact me my E-mail is jdwhite@ilstu.edu . Or click HERE (file:///J:/WWW/2010SP/JDW/jdw-p1.htm) for a link to my current school web page, which I update weekly. Thanks!
- published: 07 Aug 2008
- views: 15949
- author: VEYR16W
Matsuura Maxia: W16 Engine Block Machined From Solid Billet- Order: Reorder
- Duration: 9:42
- Updated: 01 Jan 1970
Video of a Matsuura MAM72-42V 5 axis CNC machine cutting a W16 Engine Block from solid billethttp://wn.com/Matsuura_Maxia_W16_Engine_Block_Machined_From_Solid_Billet
Video of a Matsuura MAM72-42V 5 axis CNC machine cutting a W16 Engine Block from solid billet
- published: 07 Aug 2008
- views: 492054
- author: VEYR16W
Construction of W16 engine- Order: Reorder
- Duration: 5:18
- Updated: 01 Jan 1970
Volkswagen Aktiengesellschaft's Salzgitter Engine Plant.This is where all W8's, W12's, W12 Twin Turbo's and W16 Quad Turbo's are made.http://wn.com/Construction_of_W16_engine
Volkswagen Aktiengesellschaft's Salzgitter Engine Plant.This is where all W8's, W12's, W12 Twin Turbo's and W16 Quad Turbo's are made.
- published: 07 Aug 2008
- views: 987501
- author: VEYR16W
Bugatti Veyron Prescott Hill- Engine idle exhaust close up- Order: Reorder
- Duration: 0:25
- Updated: 01 Jan 1970
Bugatti Veyron up close of exhaust, what a noise, like a thundercloud!http://wn.com/Bugatti_Veyron_Prescott_Hill_Engine_idle_exhaust_close_up
Bugatti Veyron up close of exhaust, what a noise, like a thundercloud!
- published: 07 Aug 2008
- views: 141453
- author: VEYR16W
Engine Sound - Eleanor Mustang- Order: Reorder
- Duration: 0:08
- Updated: 01 Jan 1970
This is how a 408 cui Engine sounds like For more information check out my website: http://www.gt500-eleanor.comhttp://wn.com/Engine_Sound_Eleanor_Mustang
This is how a 408 cui Engine sounds like For more information check out my website: http://www.gt500-eleanor.com
- published: 07 Aug 2008
- views: 1055193
- author: VEYR16W
Bugatti Veyron 1001hp monster car ! WOW IMPRESSIVE !- Order: Reorder
- Duration: 3:00
- Updated: 01 Jan 1970
Bugatti Veyron 1001hp monster car ! WOW IMPRESSIVE ! http://www.stayentertained.comhttp://wn.com/Bugatti_Veyron_1001hp_monster_car_!_WOW_IMPRESSIVE_!
Bugatti Veyron 1001hp monster car ! WOW IMPRESSIVE ! http://www.stayentertained.com
- published: 07 Aug 2008
- views: 1591852
- author: VEYR16W
Bugatti Veyron being followed by E46 Bmw M3- Order: Reorder
- Duration: 2:57
- Updated: 01 Jan 1970
My Bmw M3 following a 1001 hp bugattihttp://wn.com/Bugatti_Veyron_being_followed_by_E46_Bmw_M3
My Bmw M3 following a 1001 hp bugatti
- published: 07 Aug 2008
- views: 1182820
- author: VEYR16W
Birth of a Bugatti Veyron- Order: Reorder
- Duration: 8:53
- Updated: 01 Jan 1970
Watch the birth of This Beautiful Car. I love it !http://wn.com/Birth_of_a_Bugatti_Veyron
Watch the birth of This Beautiful Car. I love it !
- published: 07 Aug 2008
- views: 409011
- author: VEYR16W
Mercedes C63 Gumball Bugatti - Fast Lane Daily - 04Sep07- Order: Reorder
- Duration: 4:57
- Updated: 01 Jan 1970
Mercedes-Benz and AMG roll out the C63 Estate, Gumball 3000 goes green, and Bugatti may begin working on a lower cost model. Hosted by Ji Young Min. Check out http://feed.fastlanedaily.com and tell us what to include in our next episode!http://wn.com/Mercedes_C63_Gumball_Bugatti_Fast_Lane_Daily_04Sep07
Mercedes-Benz and AMG roll out the C63 Estate, Gumball 3000 goes green, and Bugatti may begin working on a lower cost model. Hosted by Ji Young Min. Check out http://feed.fastlanedaily.com and tell us what to include in our next episode!
- published: 07 Aug 2008
- views: 828198
- author: VEYR16W
Gumball 2007 Registration - Bugatti Veyron & Ferrari Enzo- Order: Reorder
- Duration: 0:43
- Updated: 01 Jan 1970
http://www.StreetSuperCars.com Gumball 2007 registration - Bugatti Veyron & Ferrari Enzo. The only place to see supercar pictures and videos on the streets of London is http://www.StreetSuperCars.comhttp://wn.com/Gumball_2007_Registration_Bugatti_Veyron_Ferrari_Enzo
http://www.StreetSuperCars.com Gumball 2007 registration - Bugatti Veyron & Ferrari Enzo. The only place to see supercar pictures and videos on the streets of London is http://www.StreetSuperCars.com
- published: 07 Aug 2008
- views: 519435
- author: VEYR16W
liquidA3 (8P Chassis) test run- Order: Reorder
- Duration: 3:44
- Updated: 01 Jan 1970
This video shows one of the final test runs of the new liquidA3/S3 for the 8P chassis, the test is on a1.9TDi but has also been tested on the 2.0TDi, unfortunately the battery in the camara ran out before I could capture all the features.http://wn.com/liquidA3_8P_Chassis_test_run
This video shows one of the final test runs of the new liquidA3/S3 for the 8P chassis, the test is on a1.9TDi but has also been tested on the 2.0TDi, unfortunately the battery in the camara ran out before I could capture all the features.
- published: 25 Oct 2009
- views: 11756
- author: VEYR16W
Send this Playlist by SMSEmail this Page
BoxWrench Basic Engine Building Video -How to Repair DVD- Order: Reorder
- Duration: 2:05
- Updated: 01 Jan 1970
To purchase these tools click here... http://store.boxwrench.net/Goodson-Short-Block-Piston-Install-Kit_p_89.html http://store.boxwrench.net/Automotive-Engine-Building-Tools_c_59.html Includes Goodson Tools:Piston Install Hammer - Piston Ring Expander Pliers - Piston Ring Compressor - Crank Turning Socket - Connecting Rod Bolt Protectors - This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Carburetor-Installation-amp-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. Check for even more tools being added here... http://store.boxwrench.net/Tools_c_21.html BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/BoxWrench_Basic_Engine_Building_Video_-How_to_Repair_DVD
To purchase these tools click here... http://store.boxwrench.net/Goodson-Short-Block-Piston-Install-Kit_p_89.html http://store.boxwrench.net/Automotive-Engine-Building-Tools_c_59.html Includes Goodson Tools:Piston Install Hammer - Piston Ring Expander Pliers - Piston Ring Compressor - Crank Turning Socket - Connecting Rod Bolt Protectors - This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Carburetor-Installation-amp-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. Check for even more tools being added here... http://store.boxwrench.net/Tools_c_21.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 202899
- author: BoxWrench
Cylinder Bore Honing - Engine Building Video - Hone Piston Wall- Order: Reorder
- Duration: 1:29
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 28: Honing And finally we come to the main part of the machine shops job, honing the cylinder walls. It will do two things. First it will bring the cylinder walls to the matching diameter of the new pistons. Second it will leave a cross hatch pattern of light scratches, to keep oil on the walls and prevent metal on metal scraping. A dial bore gauge is used to bring it to the exact spec needed within 1/10,000th of an inch. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Cylinder_Bore_Honing_Engine_Building_Video_Hone_Piston_Wall
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 28: Honing And finally we come to the main part of the machine shops job, honing the cylinder walls. It will do two things. First it will bring the cylinder walls to the matching diameter of the new pistons. Second it will leave a cross hatch pattern of light scratches, to keep oil on the walls and prevent metal on metal scraping. A dial bore gauge is used to bring it to the exact spec needed within 1/10,000th of an inch. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 904268
- author: BoxWrench
Cylinder Block Machining Video - Engine Building DVD- Order: Reorder
- Duration: 3:22
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 25: Cylinder Block By this time your block is disassembled and in the machine shop. One of the most informative sections, here we take you behind the scenes to show what goes on while your away. We show the process of align honing the main bearing bore that is needed before anything else can be machined. Then the block deck is leveled and machined as needed for the new head gaskets to seat properly. And finally the cylinder walls are bored out just shy of their new size, which will be achieved when they're honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net Educating the Automotive Enthusiast! Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Cylinder_Block_Machining_Video_Engine_Building_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 25: Cylinder Block By this time your block is disassembled and in the machine shop. One of the most informative sections, here we take you behind the scenes to show what goes on while your away. We show the process of align honing the main bearing bore that is needed before anything else can be machined. Then the block deck is leveled and machined as needed for the new head gaskets to seat properly. And finally the cylinder walls are bored out just shy of their new size, which will be achieved when they're honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net Educating the Automotive Enthusiast! Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 857925
- author: BoxWrench
Valve Lash Adjustment Video - Engine Building Car Repair DVD- Order: Reorder
- Duration: 3:04
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 49: Valve Lash Adjustment You should have done this previously in the "Pre-Assembly" section. This time it's for real. You want to leave as much of the internal lubrication in place as possible. If you follow the firing order of your motor, you'll only have to turn the crankshaft one complete rotation. This section has some of the more detailed 3D models to show you the internals of a working motor. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Valve_Lash_Adjustment_Video_Engine_Building_Car_Repair_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 49: Valve Lash Adjustment You should have done this previously in the "Pre-Assembly" section. This time it's for real. You want to leave as much of the internal lubrication in place as possible. If you follow the firing order of your motor, you'll only have to turn the crankshaft one complete rotation. This section has some of the more detailed 3D models to show you the internals of a working motor. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 683581
- author: BoxWrench
Cylinder Head Valve Train Teardown Video-Engine Building DVD- Order: Reorder
- Duration: 2:36
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 13: Valve Train The valve train is all of the engine parts, inside the cylinder head, that control the opening and closing of the valves. The camshaft, lifters, pushrods, rocker arms, and valve springs and the valves themselves, all make up the valve train in all motors. In this section we show the proper way to disassemble and organize the entire system. Gives example of rocker shafts on some motors. A great accessory for this is Goodson tools VTO 80 valve train organizer tray, to keep all your parts together in the right order. Also covers the certain tools you need like a Craftsman pick set, and a lifter extractor tool. Great shots of our marine engine and the sludge inside it before it went out to the machine shop! BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines.All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Cylinder_Head_Valve_Train_Teardown_Video-Engine_Building_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 13: Valve Train The valve train is all of the engine parts, inside the cylinder head, that control the opening and closing of the valves. The camshaft, lifters, pushrods, rocker arms, and valve springs and the valves themselves, all make up the valve train in all motors. In this section we show the proper way to disassemble and organize the entire system. Gives example of rocker shafts on some motors. A great accessory for this is Goodson tools VTO 80 valve train organizer tray, to keep all your parts together in the right order. Also covers the certain tools you need like a Craftsman pick set, and a lifter extractor tool. Great shots of our marine engine and the sludge inside it before it went out to the machine shop! BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines.All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 450978
- author: BoxWrench
Camshaft Installation Video - Engine Building Car Repair DVD- Order: Reorder
- Duration: 1:36
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 40: Camshaft Now that you're block is ready, onto the "Final Assembly" section of the video and installing your camshaft. We recommend Crane Cams. You will need all of your cam bearings installed first. You will need moly lube on the distributor drive gear and all of the lobes of your cam. To avoid a mess only do one section of lobes at a time and rest the cam on a journal to lube the next section. It should be freely rotating after installation. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Camshaft_Installation_Video_Engine_Building_Car_Repair_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 40: Camshaft Now that you're block is ready, onto the "Final Assembly" section of the video and installing your camshaft. We recommend Crane Cams. You will need all of your cam bearings installed first. You will need moly lube on the distributor drive gear and all of the lobes of your cam. To avoid a mess only do one section of lobes at a time and rest the cam on a journal to lube the next section. It should be freely rotating after installation. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 431550
- author: BoxWrench
Engine Ignition: Wiring Distributor & Spark Plugs Video- DVD- Order: Reorder
- Duration: 4:45
- Updated: 01 Jan 1970
Click to buy a "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 53: Ignition The second part of the "Ignition" section shows you how to find the initial timing of your engine, with or with out a top dead center whistle. You need to know your firing order and distributor rotation direction. Then we'll show you how to set the distributor cap right, using the #1 cylinder in your firing order. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Engine_Ignition_Wiring_Distributor_Spark_Plugs_Video_DVD
Click to buy a "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 53: Ignition The second part of the "Ignition" section shows you how to find the initial timing of your engine, with or with out a top dead center whistle. You need to know your firing order and distributor rotation direction. Then we'll show you how to set the distributor cap right, using the #1 cylinder in your firing order. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 389451
- author: BoxWrench
How to Install Distributor Video-Engine Building Repair DVD- Order: Reorder
- Duration: 2:33
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 53: Ignition This section of "Final Assembly" covers installing your distributor. This can be tricky. The distributor gear has to meet the cam gear and connect with the oil pump drive shaft. Take your time and you'll get it. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/How_to_Install_Distributor_Video-Engine_Building_Repair_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 53: Ignition This section of "Final Assembly" covers installing your distributor. This can be tricky. The distributor gear has to meet the cam gear and connect with the oil pump drive shaft. Take your time and you'll get it. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 383938
- author: BoxWrench
Engine Building Video - Piston Removal - Chevy V8 Small Block- Order: Reorder
- Duration: 4:16
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 17: Pistons By this section you'll be ready to remove the pistons, starting with the rod caps. You'll also get to see the crankshaft, rod bearings and journals for the first time and inspect them for damage as they come out. Great tips on protecting the cylinder bore while removing the pistons and connecting rods. We don't recommend using a ridge reamer to make this easier. As your block will need to go the a machine shop anyway. They are likely to damage your cylinder walls and are hard to use. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Engine_Building_Video_Piston_Removal_Chevy_V8_Small_Block
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 17: Pistons By this section you'll be ready to remove the pistons, starting with the rod caps. You'll also get to see the crankshaft, rod bearings and journals for the first time and inspect them for damage as they come out. Great tips on protecting the cylinder bore while removing the pistons and connecting rods. We don't recommend using a ridge reamer to make this easier. As your block will need to go the a machine shop anyway. They are likely to damage your cylinder walls and are hard to use. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 272332
- author: BoxWrench
Camshaft Break In Procedure Video - Engine Building DVD- Order: Reorder
- Duration: 1:55
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 60: Camshaft Break-In If you have a new camshaft, the break-in procedure is critical. Follow our guidelines and you won't flatten a cam lobe and ruin the internals of your engine. The basic formula is 20 minutes @2000 rpms and never going below 1500 rpms. Make sure not to let it idle. Changing from 1500 to 2500 rpm every few minutes will help the cam break-in as well. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Camshaft_Break_In_Procedure_Video_Engine_Building_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 60: Camshaft Break-In If you have a new camshaft, the break-in procedure is critical. Follow our guidelines and you won't flatten a cam lobe and ruin the internals of your engine. The basic formula is 20 minutes @2000 rpms and never going below 1500 rpms. Make sure not to let it idle. Changing from 1500 to 2500 rpm every few minutes will help the cam break-in as well. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 271457
- author: BoxWrench
Connecting Rods Machine Shop Video-Engine Building DVD- Order: Reorder
- Duration: 1:38
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 27: Connecting Rods By now the connecting rods are ready for pistons. We recommend having the machine shop clean your old pistons for you, if you plan to reuse them. It's not fun at all by hand. Here we show you how they install the rod pins into the connecting rods to connect with the pistons. Then they will measure the pistons to determine the final bore size of the cylinder walls before they are honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net Educating the Automotive Enthusiast BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Connecting_Rods_Machine_Shop_Video-Engine_Building_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 27: Connecting Rods By now the connecting rods are ready for pistons. We recommend having the machine shop clean your old pistons for you, if you plan to reuse them. It's not fun at all by hand. Here we show you how they install the rod pins into the connecting rods to connect with the pistons. Then they will measure the pistons to determine the final bore size of the cylinder walls before they are honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net Educating the Automotive Enthusiast BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 322310
- author: BoxWrench
Ford 351 Windsor Small Block Engine - Water in Oil Mystery- Order: Reorder
- Duration: 3:30
- Updated: 01 Jan 1970
Behind the scenes of "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html A special internet only treat from the producers of the BoxWrench Series! Basic Engine Building DVD - Behind the Scenes: Small Block Ford 351 Windsor Diagnosis We gonna show you some never before seen footage from the filthy Ford 351W we pulled out of a boat. BoxWrench Director Brent Bye recaps the story of discovering the engines problem and what ensued as the tear down process proceeded. Basically salt water was leaking into a cylinder head thru some hidden steel water plugs that only these small block 351 W motors have. Being a marine engine they needed to be replaced with rust proof brass plugs. After running for 5 years the water eroded holes straight thru them. Water pressurized from the water pump was squirting into the cylinder heads right onto the rocker arms, valves and valve springs, ultimately all the way down to the oil pan and crankcase. It all made out for a surprising tear down. This particular Ford 351 Windsor marine motor was fully rebuild on camera in the "Basic Engine Building" DVD. Even a catastrophic blown engine like this can be rebuilt with the proper knowledge and tools. The BoxWrench Series is designed to give you that knowledge and let you have fun with it. The full DVD with all of the interactive menus, Tools section and engine Glossary terms is available here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Ford_351_Windsor_Small_Block_Engine_Water_in_Oil_Mystery
Behind the scenes of "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html A special internet only treat from the producers of the BoxWrench Series! Basic Engine Building DVD - Behind the Scenes: Small Block Ford 351 Windsor Diagnosis We gonna show you some never before seen footage from the filthy Ford 351W we pulled out of a boat. BoxWrench Director Brent Bye recaps the story of discovering the engines problem and what ensued as the tear down process proceeded. Basically salt water was leaking into a cylinder head thru some hidden steel water plugs that only these small block 351 W motors have. Being a marine engine they needed to be replaced with rust proof brass plugs. After running for 5 years the water eroded holes straight thru them. Water pressurized from the water pump was squirting into the cylinder heads right onto the rocker arms, valves and valve springs, ultimately all the way down to the oil pan and crankcase. It all made out for a surprising tear down. This particular Ford 351 Windsor marine motor was fully rebuild on camera in the "Basic Engine Building" DVD. Even a catastrophic blown engine like this can be rebuilt with the proper knowledge and tools. The BoxWrench Series is designed to give you that knowledge and let you have fun with it. The full DVD with all of the interactive menus, Tools section and engine Glossary terms is available here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 182567
- author: BoxWrench
Fuel & Water Pump Thermostat Video-Engine Building DVD- Order: Reorder
- Duration: 1:54
- Updated: 01 Jan 1970
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 51: Engine Externals A quick clip on installing external components like your fuel pump, water pump, and thermostat housing. It's usually easiest to have the harmonic balancer set at top dead center for your fuel pump. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrenchhttp://wn.com/Fuel_Water_Pump_Thermostat_Video-Engine_Building_DVD
Buy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 51: Engine Externals A quick clip on installing external components like your fuel pump, water pump, and thermostat housing. It's usually easiest to have the harmonic balancer set at top dead center for your fuel pump. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 149929
- author: BoxWrench
1:59
0001 Unity (Intro)Learning the Unity Game Engine...published: 10 Nov 2009author: cannedmushrooms0001 Unity (Intro)Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 9379
- author: cannedmushrooms
3:47
0002 Unity (where to get Unity)Learning the Unity Game Engine...published: 10 Nov 2009author: cannedmushrooms0002 Unity (where to get Unity)Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 4672
- author: cannedmushrooms
4:27
0003 Unity (Navigation)Learning the Unity Game Engine...published: 10 Nov 2009author: cannedmushrooms0003 Unity (Navigation)Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 6125
- author: cannedmushrooms
8:35
0004 Unity (thinking outside the box)Learning the Unity Game Engine...published: 10 Nov 2009author: cannedmushrooms0004 Unity (thinking outside the box)Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 8677
- author: cannedmushrooms
6:41
0005 Unity (1 to 1 scale)Learning the Unity Game Engine...published: 10 Nov 2009author: cannedmushrooms0005 Unity (1 to 1 scale)Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 4927
- author: cannedmushrooms
5:04
0006 Unity (Material vs texture)Learning the Unity Game Engine...published: 10 Nov 2009author: cannedmushrooms0006 Unity (Material vs texture)Learning the Unity Game Engine
- published: 10 Nov 2009
- views: 6643
- author: cannedmushrooms
6:42
0007 Unity (details)Learning the Unity Game Engine...published: 15 Nov 2009author: cannedmushrooms0007 Unity (details)Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 4366
- author: cannedmushrooms
6:57
0008 Unity (Why bricks)Learning the Unity Game Engine...published: 15 Nov 2009author: cannedmushrooms0008 Unity (Why bricks)Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 3525
- author: cannedmushrooms
7:02
0009 Unity (easy tile bricks)Learning the Unity Game Engine...published: 15 Nov 2009author: cannedmushrooms0009 Unity (easy tile bricks)Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 2804
- author: cannedmushrooms
9:53
0010 Unity (size matters)Learning the Unity Game Engine...published: 15 Nov 2009author: cannedmushrooms0010 Unity (size matters)Learning the Unity Game Engine
- published: 15 Nov 2009
- views: 3137
- author: cannedmushrooms
4:58
0011 Unity (UVs vs tile)Learn the Unity Game Engine...published: 11 Nov 2009author: cannedmushrooms0011 Unity (UVs vs tile)Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 2721
- author: cannedmushrooms
9:43
0012 Unity (building a room)Learn the Unity Game Engine...published: 11 Nov 2009author: cannedmushrooms0012 Unity (building a room)Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 5976
- author: cannedmushrooms
7:58
0013 Unity (texture scale)Learn the Unity Game Engine...published: 11 Nov 2009author: cannedmushrooms0013 Unity (texture scale)Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 4315
- author: cannedmushrooms
5:33
0014 Unity (one Room School house)Learn the Unity Game Engine...published: 11 Nov 2009author: cannedmushrooms0014 Unity (one Room School house)Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 2901
- author: cannedmushrooms
Vimeo results:5:47
The City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro....published: 20 Feb 2012author: Jarbas AgnelliThe City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro. Soundtrack available here: http://tinyurl.com/6mrzndl Made by Keith Loutit and Jarbas Agnelli. Captured during Carnaval of 2011. Music by Jarbas Agnelli. Special thanks to Rede Globo, Liesa and Jodele Larcher. Extra thanks to Aguinaldo Rocca (producer) and Nick Graham-Smith (recording engineer). Thanks also to Guto Vaz, Marcio Avila and Duda M. for supporting us on the ground. keithloutit.com adstudio.com.br4:28
ProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory han...published: 18 Feb 2010author: Johnny KellyProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory hands-on gloves-off study into the practice of putting things 'off''. Sometimes the only way to get something done is to do two dozen other things first. Story, Animation, Direction: Johnny Kelly Voice Over: Bryan Quinn Sound Supervision: Mike Wyeld Foley Artist: Sue Harding Foley Engineer: John Mark Foley recorded at Fonic Studios, London The film is distributed by Dazzle Films www.dazzlefilms.co.uk www.mickeyandjohnny.com www.mikewyeld.com2:24
Timelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done us...published: 23 Aug 2010author: Mike FloresTimelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done using two custom track and dolly systems that I engineered, utilizing off the shelf components with a bit of custom fabrication. My primary system consists of a set of Mumford rotary tables with a Time Machine for the motion control programming. The secondary system consisted of a lower tech servo city DC motor. Music is by Hans Zimmer, "Dream is Collapsing" from the Inception soundtrack.3:18
NightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making t...published: 09 Aug 2012author: Colin RichNightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making these things. Thanks! Colin Music: M83, "Echoes of Mine" off of 'Hurry Up, We're Dreaming.' Available from Mute Records, EMI Music Download the song/album here here: itunes.apple.com/us/album/midnight-city Cinematography, Direction, and Editing by: Colin Rich: https://www.facebook.com/colinrich1 Produced by Pacific Star Productions www.pacstarpro.com A big thanks to Matthews MSE (www.msegrip.com) especially to Bob Kulesh, Tyler & Ed Phillips for their generous support and patience of this lengthy endeavor. Most of the linear motion control shots were captured using their FloatCam DC Slider, a wonderful piece of engineering for the time lapse world. 'Nightfall' is a three minute tour of light through the City of Angels. I shot "Nightfall" in an attempt to capture Los Angeles as it transitioned from day to night. As you probably know, LA is an expansive city so shooting it from many different angles was critical. Usually I was able to capture just one shot per day with a lot of driving, exploring, and scouting in between but the times sitting in traffic or a "sketchy" neighborhood often lead to new adventures and interesting places. Nightfall in particular is my favorite time to shoot time lapse. Capturing the transition from day to night while looking back at the city as the purple shadow of Earth envelopes the eastern skyline and the warm distant twinkling halogen lights spark to life and give the fading sun a run for her money- this will never grow old or boring to me. In this piece, it was important to me for the shots to both capture and accentuate the movement of light through the day and night and the use of multiple motion control techniques allowed me to do so. I hope you enjoy watching it as much as I enjoyed creating it. An English translation of the lyrics- "It is late. I am looking for my other home, taking an unfamiliar path: a small trail near the factories and the city, cutting through the forest. I can barely see nature when suddenly, night falls. I am engulfed by a world of silence, yet I am not afraid. I fall asleep for a few minutes at the most, and when I wake up, the sun is there and the forest is shining with a bright light. I recognize this forest. It is not an ordinary forest, it is a forest of memories. My memories. The white and noisy river, my adolescence. The tall trees, the men I have loved. The birds in flight, and in the distance, my lost father. My memories aren't memories anymore. They are there, with me, dancing and embracing, singing and smiling at me. I look at my hands. I caress my face, and I am 20 years old. And I love like I have never loved before."
Youtube results:0:54
0015 Assignment1Learn the Unity Game Engine...published: 11 Nov 2009author: cannedmushrooms0015 Assignment1Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 1907
- author: cannedmushrooms
6:18
0016 Unity (Texture Workflow 2)Learn the Unity Game Engine...published: 11 Nov 2009author: cannedmushrooms0016 Unity (Texture Workflow 2)Learn the Unity Game Engine
- published: 11 Nov 2009
- views: 3389
- author: cannedmushrooms
5:30
0017 Unity (Baked textures)Learn the Unity Game Engine...published: 15 Nov 2009author: cannedmushrooms0017 Unity (Baked textures)Learn the Unity Game Engine
- published: 15 Nov 2009
- views: 3348
- author: cannedmushrooms
4:26
0018 Unity (Building a new Project)learning the Unity Game Engine...published: 15 Nov 2009author: cannedmushrooms0018 Unity (Building a new Project)learning the Unity Game Engine
- published: 15 Nov 2009
- views: 1958
- author: cannedmushrooms
9:49
Tile Engine Tutorial Episode 1, Pt 1/2An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 1, Pt 1/2An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 19302
- author: Nick Gravelyn
9:37
Tile Engine Tutorial Episode 1, Pt 2 / 2An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 1, Pt 2 / 2An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 6901
- author: Nick Gravelyn
9:52
Tile Engine Tutorial Episode 2, Pt 1 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 2, Pt 1 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 4653
- author: Nick Gravelyn
8:11
Tile Engine Tutorial Episode 2, Pt 2 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 2, Pt 2 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 6446
- author: Nick Gravelyn
7:25
Tile Engine Tutorial Episode 2, Pt 3 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 2, Pt 3 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 3450
- author: Nick Gravelyn
9:35
Tile Engine Tutorial Episode 3A, Part 1 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 3A, Part 1 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 4528
- author: Nick Gravelyn
9:27
Tile Engine Tutorial Episode 3A, Part 2 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 3A, Part 2 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 3568
- author: Nick Gravelyn
7:52
Tile Engine Tutorial Episode 3A, Part 3 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 3A, Part 3 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube. Project Download: http://dl.nickgravelyn.com/?TileEngine03a.zip
- published: 13 Feb 2010
- views: 3222
- author: Nick Gravelyn
9:05
Tile Engine Tutorial Episode 3B, Part 1 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 3B, Part 1 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube. Project Download: http://dl.nickgravelyn.com/?TileEngine03b.zip
- published: 13 Feb 2010
- views: 4181
- author: Nick Gravelyn
8:21
Tile Engine Tutorial Episode 3B, Part 2 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 3B, Part 2 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2753
- author: Nick Gravelyn
10:16
Tile Engine Tutorial Episode 3B, Part 3 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 3B, Part 3 / 3An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2375
- author: Nick Gravelyn
9:23
Tile Engine Tutorial Episode 4A, Part 1 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4A, Part 1 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 3699
- author: Nick Gravelyn
9:30
Tile Engine Tutorial Episode 4A, Part 2 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4A, Part 2 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2512
- author: Nick Gravelyn
9:13
Tile Engine Tutorial Episode 4A, Part 3 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4A, Part 3 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2215
- author: Nick Gravelyn
Vimeo results:5:47
The City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro....published: 20 Feb 2012author: Jarbas AgnelliThe City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro. Soundtrack available here: http://tinyurl.com/6mrzndl Made by Keith Loutit and Jarbas Agnelli. Captured during Carnaval of 2011. Music by Jarbas Agnelli. Special thanks to Rede Globo, Liesa and Jodele Larcher. Extra thanks to Aguinaldo Rocca (producer) and Nick Graham-Smith (recording engineer). Thanks also to Guto Vaz, Marcio Avila and Duda M. for supporting us on the ground. keithloutit.com adstudio.com.br4:28
ProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory han...published: 18 Feb 2010author: Johnny KellyProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory hands-on gloves-off study into the practice of putting things 'off''. Sometimes the only way to get something done is to do two dozen other things first. Story, Animation, Direction: Johnny Kelly Voice Over: Bryan Quinn Sound Supervision: Mike Wyeld Foley Artist: Sue Harding Foley Engineer: John Mark Foley recorded at Fonic Studios, London The film is distributed by Dazzle Films www.dazzlefilms.co.uk www.mickeyandjohnny.com www.mikewyeld.com2:24
Timelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done us...published: 23 Aug 2010author: Mike FloresTimelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done using two custom track and dolly systems that I engineered, utilizing off the shelf components with a bit of custom fabrication. My primary system consists of a set of Mumford rotary tables with a Time Machine for the motion control programming. The secondary system consisted of a lower tech servo city DC motor. Music is by Hans Zimmer, "Dream is Collapsing" from the Inception soundtrack.3:18
NightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making t...published: 09 Aug 2012author: Colin RichNightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making these things. Thanks! Colin Music: M83, "Echoes of Mine" off of 'Hurry Up, We're Dreaming.' Available from Mute Records, EMI Music Download the song/album here here: itunes.apple.com/us/album/midnight-city Cinematography, Direction, and Editing by: Colin Rich: https://www.facebook.com/colinrich1 Produced by Pacific Star Productions www.pacstarpro.com A big thanks to Matthews MSE (www.msegrip.com) especially to Bob Kulesh, Tyler & Ed Phillips for their generous support and patience of this lengthy endeavor. Most of the linear motion control shots were captured using their FloatCam DC Slider, a wonderful piece of engineering for the time lapse world. 'Nightfall' is a three minute tour of light through the City of Angels. I shot "Nightfall" in an attempt to capture Los Angeles as it transitioned from day to night. As you probably know, LA is an expansive city so shooting it from many different angles was critical. Usually I was able to capture just one shot per day with a lot of driving, exploring, and scouting in between but the times sitting in traffic or a "sketchy" neighborhood often lead to new adventures and interesting places. Nightfall in particular is my favorite time to shoot time lapse. Capturing the transition from day to night while looking back at the city as the purple shadow of Earth envelopes the eastern skyline and the warm distant twinkling halogen lights spark to life and give the fading sun a run for her money- this will never grow old or boring to me. In this piece, it was important to me for the shots to both capture and accentuate the movement of light through the day and night and the use of multiple motion control techniques allowed me to do so. I hope you enjoy watching it as much as I enjoyed creating it. An English translation of the lyrics- "It is late. I am looking for my other home, taking an unfamiliar path: a small trail near the factories and the city, cutting through the forest. I can barely see nature when suddenly, night falls. I am engulfed by a world of silence, yet I am not afraid. I fall asleep for a few minutes at the most, and when I wake up, the sun is there and the forest is shining with a bright light. I recognize this forest. It is not an ordinary forest, it is a forest of memories. My memories. The white and noisy river, my adolescence. The tall trees, the men I have loved. The birds in flight, and in the distance, my lost father. My memories aren't memories anymore. They are there, with me, dancing and embracing, singing and smiling at me. I look at my hands. I caress my face, and I am 20 years old. And I love like I have never loved before."
Youtube results:7:57
Tile Engine Tutorial Episode 4A, Part 4 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4A, Part 4 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2319
- author: Nick Gravelyn
8:59
Tile Engine Tutorial Episode 4B, Part 1 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4B, Part 1 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 2055
- author: Nick Gravelyn
8:57
Tile Engine Tutorial Episode 4B, Part 2 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4B, Part 2 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1661
- author: Nick Gravelyn
9:20
Tile Engine Tutorial Episode 4B, Part 3 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it ...published: 13 Feb 2010author: Nick GravelynTile Engine Tutorial Episode 4B, Part 3 / 4An old tile engine tutorial video series that I did a couple years ago, just uploading it to YouTube.
- published: 13 Feb 2010
- views: 1554
- author: Nick Gravelyn
1:34
Model Stickney Hit & Miss Engine First Run.This is the engine I have been building since Metal Casting at Home video part 10. Ready ...published: 02 Dec 2011author: myfordboyModel Stickney Hit & Miss Engine First Run.This is the engine I have been building since Metal Casting at Home video part 10. Ready for painting and mounting on hardwood base.
- published: 02 Dec 2011
- views: 104351
- author: myfordboy
1:44
Model Monitor Hit and Miss Engine.Model engine made in my workshop from my own castings. See Metal Casting at Home series of...published: 02 Dec 2011author: myfordboyModel Monitor Hit and Miss Engine.Model engine made in my workshop from my own castings. See Metal Casting at Home series of videos to see how they were made.
- published: 02 Dec 2011
- views: 16052
- author: myfordboy
1:31
Brockway and Philips Hot Air FanHome built replica engine. Dimentions taken from patent application drawings. Scale- full ...published: 02 Dec 2011author: myfordboyBrockway and Philips Hot Air FanHome built replica engine. Dimentions taken from patent application drawings. Scale- full size.
- published: 02 Dec 2011
- views: 42714
- author: myfordboy
1:53
Model Aermotor Hit & Miss 8 Cycle EngineHalf size model engine. Built from my own castings. Measurements taken from full size engi...published: 02 Dec 2011author: myfordboyModel Aermotor Hit & Miss 8 Cycle EngineHalf size model engine. Built from my own castings. Measurements taken from full size engine.
- published: 02 Dec 2011
- views: 71941
- author: myfordboy
1:02
New Holland Hit and Miss Model Engine1/3 scale model running on butane gas. Built from my own castings....published: 02 Dec 2011author: myfordboyNew Holland Hit and Miss Model Engine1/3 scale model running on butane gas. Built from my own castings.
- published: 02 Dec 2011
- views: 21206
- author: myfordboy
0:51
Sugg Hot Air Engine. Model.Robinson variant fitted with compressor to increase gas pressure in pipeline....published: 02 Dec 2011author: myfordboySugg Hot Air Engine. Model.Robinson variant fitted with compressor to increase gas pressure in pipeline.
- published: 02 Dec 2011
- views: 69221
- author: myfordboy
2:55
Essex Hot Air FanHome built replica engine from my own castings. In this design the upper casting is the po...published: 02 Dec 2011author: myfordboyEssex Hot Air FanHome built replica engine from my own castings. In this design the upper casting is the power cylinder. The power piston is hollow and has the hot cap connected to it. The displacer travels inside the piston/ hot cap assembly. The displacer is driven by the crank in the centre of the cylinder. The power piston connecting rod is attached to the outside of the hot cap and is connected to the crank at the back of the engine. The hot cap moves in and out of the flame. Unusual arrangement but it works very well . It is quite a powerfull engine.
- published: 02 Dec 2011
- views: 49832
- author: myfordboy
1:29
Stirling Cycle Engine from Tin cansI designed the engine to see how simple one could be made from easily avaiable items. A la...published: 02 Dec 2011author: myfordboyStirling Cycle Engine from Tin cansI designed the engine to see how simple one could be made from easily avaiable items. A lathe is not essential can be made with hand tools and drill.Plans and instructions are available from me.
- published: 02 Dec 2011
- views: 58497
- author: myfordboy
1:29
Wall mounted Hot Air Fan Motor, Stirling Cycle. Anderson , Erickson & WickstromI made this some time ago. It was made with reference to a patent drawing of 1900. I am no...published: 02 Dec 2011author: myfordboyWall mounted Hot Air Fan Motor, Stirling Cycle. Anderson , Erickson & WickstromI made this some time ago. It was made with reference to a patent drawing of 1900. I am not sure if these were ever made but my replica works well. No castings were used on this engine all the parts have been fabricated.
- published: 02 Dec 2011
- views: 11107
- author: myfordboy
6:08
Easy to Build Stirling Engine Part 2 Alternative Displacer.A few E Z Stirling builders have emailed me and asked what they can use for a displacer as...published: 13 Mar 2012author: myfordboyEasy to Build Stirling Engine Part 2 Alternative Displacer.A few E Z Stirling builders have emailed me and asked what they can use for a displacer as balsa wood is unobtainable where the live. Here is a an alternative construction which works just as well although more care is needed in it's construction. More details at myfordboy.blogspot.com Watch in 1080p
- published: 13 Mar 2012
- views: 22318
- author: myfordboy
32:54
Easy to Build Stirling Cycle Engine. Free Plans, Hot AirThis engine could be built by anyone with basic craft skills and uses easy to obtain mater...published: 14 Mar 2012author: myfordboyEasy to Build Stirling Cycle Engine. Free Plans, Hot AirThis engine could be built by anyone with basic craft skills and uses easy to obtain materials. Video shows the full build. For a free plan and detailed instructions visit myfordboy.blogspot.com See also part 2 of this video for alternative construction method.
- published: 14 Mar 2012
- views: 248797
- author: myfordboy
Vimeo results:5:47
The City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro....published: 20 Feb 2012author: Jarbas AgnelliThe City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro. Soundtrack available here: http://tinyurl.com/6mrzndl Made by Keith Loutit and Jarbas Agnelli. Captured during Carnaval of 2011. Music by Jarbas Agnelli. Special thanks to Rede Globo, Liesa and Jodele Larcher. Extra thanks to Aguinaldo Rocca (producer) and Nick Graham-Smith (recording engineer). Thanks also to Guto Vaz, Marcio Avila and Duda M. for supporting us on the ground. keithloutit.com adstudio.com.br4:28
ProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory han...published: 18 Feb 2010author: Johnny KellyProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory hands-on gloves-off study into the practice of putting things 'off''. Sometimes the only way to get something done is to do two dozen other things first. Story, Animation, Direction: Johnny Kelly Voice Over: Bryan Quinn Sound Supervision: Mike Wyeld Foley Artist: Sue Harding Foley Engineer: John Mark Foley recorded at Fonic Studios, London The film is distributed by Dazzle Films www.dazzlefilms.co.uk www.mickeyandjohnny.com www.mikewyeld.com2:24
Timelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done us...published: 23 Aug 2010author: Mike FloresTimelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done using two custom track and dolly systems that I engineered, utilizing off the shelf components with a bit of custom fabrication. My primary system consists of a set of Mumford rotary tables with a Time Machine for the motion control programming. The secondary system consisted of a lower tech servo city DC motor. Music is by Hans Zimmer, "Dream is Collapsing" from the Inception soundtrack.3:18
NightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making t...published: 09 Aug 2012author: Colin RichNightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making these things. Thanks! Colin Music: M83, "Echoes of Mine" off of 'Hurry Up, We're Dreaming.' Available from Mute Records, EMI Music Download the song/album here here: itunes.apple.com/us/album/midnight-city Cinematography, Direction, and Editing by: Colin Rich: https://www.facebook.com/colinrich1 Produced by Pacific Star Productions www.pacstarpro.com A big thanks to Matthews MSE (www.msegrip.com) especially to Bob Kulesh, Tyler & Ed Phillips for their generous support and patience of this lengthy endeavor. Most of the linear motion control shots were captured using their FloatCam DC Slider, a wonderful piece of engineering for the time lapse world. 'Nightfall' is a three minute tour of light through the City of Angels. I shot "Nightfall" in an attempt to capture Los Angeles as it transitioned from day to night. As you probably know, LA is an expansive city so shooting it from many different angles was critical. Usually I was able to capture just one shot per day with a lot of driving, exploring, and scouting in between but the times sitting in traffic or a "sketchy" neighborhood often lead to new adventures and interesting places. Nightfall in particular is my favorite time to shoot time lapse. Capturing the transition from day to night while looking back at the city as the purple shadow of Earth envelopes the eastern skyline and the warm distant twinkling halogen lights spark to life and give the fading sun a run for her money- this will never grow old or boring to me. In this piece, it was important to me for the shots to both capture and accentuate the movement of light through the day and night and the use of multiple motion control techniques allowed me to do so. I hope you enjoy watching it as much as I enjoyed creating it. An English translation of the lyrics- "It is late. I am looking for my other home, taking an unfamiliar path: a small trail near the factories and the city, cutting through the forest. I can barely see nature when suddenly, night falls. I am engulfed by a world of silence, yet I am not afraid. I fall asleep for a few minutes at the most, and when I wake up, the sun is there and the forest is shining with a bright light. I recognize this forest. It is not an ordinary forest, it is a forest of memories. My memories. The white and noisy river, my adolescence. The tall trees, the men I have loved. The birds in flight, and in the distance, my lost father. My memories aren't memories anymore. They are there, with me, dancing and embracing, singing and smiling at me. I look at my hands. I caress my face, and I am 20 years old. And I love like I have never loved before."
0:34
Bugatti Veyron W16 drawn and simulated in Autodesk Inventor[CLICK UNDER THE VIDEO TO WATCH IT IN HIGH QUALITY !] It was a project for school ( HBO ...published: 07 Aug 2008author: VEYR16WBugatti Veyron W16 drawn and simulated in Autodesk Inventor[CLICK UNDER THE VIDEO TO WATCH IT IN HIGH QUALITY !] It was a project for school ( HBO Autotechniek Rotterdam, Bachelor ) It was hard to find any technical information but after a lot of calculations, searching and contacting people... I finally had all the measures so I could start drawing. It's a Bugatti W16.4 Engine 16 cylinders 8 Liter 4 Turbo's 64 valves 1001 HP Top Speed 407,1 km/h Author: Lennart van den Doel
- published: 07 Aug 2008
- views: 637644
- author: VEYR16W
2:46
Bugatti Veyron engine 1001 hp productionproduction video of the Bugatti Veyron 1001HP engine more Video's at www.AMT.nl...published: 07 Aug 2008author: VEYR16WBugatti Veyron engine 1001 hp productionproduction video of the Bugatti Veyron 1001HP engine more Video's at www.AMT.nl
- published: 07 Aug 2008
- views: 177609
- author: VEYR16W
0:22
Fastest Car EverThe fastest road car in the world is the Bugatti Veyron. It has a W16 engine, with 4 turbo...published: 07 Aug 2008author: VEYR16WFastest Car EverThe fastest road car in the world is the Bugatti Veyron. It has a W16 engine, with 4 turbos and 10 radiators, as well as much more. enjoy!
- published: 07 Aug 2008
- views: 157674
- author: VEYR16W
4:37
Bugatti Veyron Motor w16.4 (testet by Autobild.de)Bugatti Veyron Motor w16.4 (testet by Autobild.de)...published: 07 Aug 2008author: VEYR16WBugatti Veyron Motor w16.4 (testet by Autobild.de)Bugatti Veyron Motor w16.4 (testet by Autobild.de)
- published: 07 Aug 2008
- views: 32349
- author: VEYR16W
0:33
VW Phaeton W12 6.0 ENGINEEngine of VW in the 2004 Phaeton, a 6.0 litre W12-Engine with 420 HP and 560 NM!...published: 07 Aug 2008author: VEYR16WVW Phaeton W12 6.0 ENGINEEngine of VW in the 2004 Phaeton, a 6.0 litre W12-Engine with 420 HP and 560 NM!
- published: 07 Aug 2008
- views: 142001
- author: VEYR16W
3:20
Bugatti Veyron in the rain - great engine sounds at tailpipeBugatti Veyron in the rain at Crystal Cove on 4/1/06. Incredible engine sounds at the tai...published: 07 Aug 2008author: VEYR16WBugatti Veyron in the rain - great engine sounds at tailpipeBugatti Veyron in the rain at Crystal Cove on 4/1/06. Incredible engine sounds at the tailpipe! http://crystalcovecarshow.blogspot.com
- published: 07 Aug 2008
- views: 1466506
- author: VEYR16W
0:20
Autodesk Inventor - Radial EngineThis animation was created in Autodesk Inventor using Inventor Studio. Thanks to Diemaker...published: 07 Aug 2008author: VEYR16WAutodesk Inventor - Radial EngineThis animation was created in Autodesk Inventor using Inventor Studio. Thanks to Diemaker for the dataset.
- published: 07 Aug 2008
- views: 702059
- author: VEYR16W
1:58
F1 Engine Autodesk CADI did this my senior year of high school using Autodesk Inventor. I now go to Illinois Sta...published: 07 Aug 2008author: VEYR16WF1 Engine Autodesk CADI did this my senior year of high school using Autodesk Inventor. I now go to Illinois State University and am a sophomore. If you would like to contact me my E-mail is jdwhite@ilstu.edu . Or click HERE (file:///J:/WWW/2010SP/JDW/jdw-p1.htm) for a link to my current school web page, which I update weekly. Thanks!
- published: 07 Aug 2008
- views: 15949
- author: VEYR16W
9:42
Matsuura Maxia: W16 Engine Block Machined From Solid BilletVideo of a Matsuura MAM72-42V 5 axis CNC machine cutting a W16 Engine Block from solid bil...published: 07 Aug 2008author: VEYR16WMatsuura Maxia: W16 Engine Block Machined From Solid BilletVideo of a Matsuura MAM72-42V 5 axis CNC machine cutting a W16 Engine Block from solid billet
- published: 07 Aug 2008
- views: 492054
- author: VEYR16W
5:18
Construction of W16 engineVolkswagen Aktiengesellschaft's Salzgitter Engine Plant.This is where all W8's, W12's, W12...published: 07 Aug 2008author: VEYR16WConstruction of W16 engineVolkswagen Aktiengesellschaft's Salzgitter Engine Plant.This is where all W8's, W12's, W12 Twin Turbo's and W16 Quad Turbo's are made.
- published: 07 Aug 2008
- views: 987501
- author: VEYR16W
0:25
Bugatti Veyron Prescott Hill- Engine idle exhaust close upBugatti Veyron up close of exhaust, what a noise, like a thundercloud!...published: 07 Aug 2008author: VEYR16WBugatti Veyron Prescott Hill- Engine idle exhaust close upBugatti Veyron up close of exhaust, what a noise, like a thundercloud!
- published: 07 Aug 2008
- views: 141453
- author: VEYR16W
Vimeo results:5:47
The City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro....published: 20 Feb 2012author: Jarbas AgnelliThe City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro. Soundtrack available here: http://tinyurl.com/6mrzndl Made by Keith Loutit and Jarbas Agnelli. Captured during Carnaval of 2011. Music by Jarbas Agnelli. Special thanks to Rede Globo, Liesa and Jodele Larcher. Extra thanks to Aguinaldo Rocca (producer) and Nick Graham-Smith (recording engineer). Thanks also to Guto Vaz, Marcio Avila and Duda M. for supporting us on the ground. keithloutit.com adstudio.com.br4:28
ProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory han...published: 18 Feb 2010author: Johnny KellyProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory hands-on gloves-off study into the practice of putting things 'off''. Sometimes the only way to get something done is to do two dozen other things first. Story, Animation, Direction: Johnny Kelly Voice Over: Bryan Quinn Sound Supervision: Mike Wyeld Foley Artist: Sue Harding Foley Engineer: John Mark Foley recorded at Fonic Studios, London The film is distributed by Dazzle Films www.dazzlefilms.co.uk www.mickeyandjohnny.com www.mikewyeld.com2:24
Timelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done us...published: 23 Aug 2010author: Mike FloresTimelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done using two custom track and dolly systems that I engineered, utilizing off the shelf components with a bit of custom fabrication. My primary system consists of a set of Mumford rotary tables with a Time Machine for the motion control programming. The secondary system consisted of a lower tech servo city DC motor. Music is by Hans Zimmer, "Dream is Collapsing" from the Inception soundtrack.3:18
NightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making t...published: 09 Aug 2012author: Colin RichNightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making these things. Thanks! Colin Music: M83, "Echoes of Mine" off of 'Hurry Up, We're Dreaming.' Available from Mute Records, EMI Music Download the song/album here here: itunes.apple.com/us/album/midnight-city Cinematography, Direction, and Editing by: Colin Rich: https://www.facebook.com/colinrich1 Produced by Pacific Star Productions www.pacstarpro.com A big thanks to Matthews MSE (www.msegrip.com) especially to Bob Kulesh, Tyler & Ed Phillips for their generous support and patience of this lengthy endeavor. Most of the linear motion control shots were captured using their FloatCam DC Slider, a wonderful piece of engineering for the time lapse world. 'Nightfall' is a three minute tour of light through the City of Angels. I shot "Nightfall" in an attempt to capture Los Angeles as it transitioned from day to night. As you probably know, LA is an expansive city so shooting it from many different angles was critical. Usually I was able to capture just one shot per day with a lot of driving, exploring, and scouting in between but the times sitting in traffic or a "sketchy" neighborhood often lead to new adventures and interesting places. Nightfall in particular is my favorite time to shoot time lapse. Capturing the transition from day to night while looking back at the city as the purple shadow of Earth envelopes the eastern skyline and the warm distant twinkling halogen lights spark to life and give the fading sun a run for her money- this will never grow old or boring to me. In this piece, it was important to me for the shots to both capture and accentuate the movement of light through the day and night and the use of multiple motion control techniques allowed me to do so. I hope you enjoy watching it as much as I enjoyed creating it. An English translation of the lyrics- "It is late. I am looking for my other home, taking an unfamiliar path: a small trail near the factories and the city, cutting through the forest. I can barely see nature when suddenly, night falls. I am engulfed by a world of silence, yet I am not afraid. I fall asleep for a few minutes at the most, and when I wake up, the sun is there and the forest is shining with a bright light. I recognize this forest. It is not an ordinary forest, it is a forest of memories. My memories. The white and noisy river, my adolescence. The tall trees, the men I have loved. The birds in flight, and in the distance, my lost father. My memories aren't memories anymore. They are there, with me, dancing and embracing, singing and smiling at me. I look at my hands. I caress my face, and I am 20 years old. And I love like I have never loved before."
Youtube results:0:08
Engine Sound - Eleanor MustangThis is how a 408 cui Engine sounds like For more information check out my website: http:...published: 07 Aug 2008author: VEYR16WEngine Sound - Eleanor MustangThis is how a 408 cui Engine sounds like For more information check out my website: http://www.gt500-eleanor.com
- published: 07 Aug 2008
- views: 1055193
- author: VEYR16W
3:00
Bugatti Veyron 1001hp monster car ! WOW IMPRESSIVE !Bugatti Veyron 1001hp monster car ! WOW IMPRESSIVE ! http://www.stayentertained.com...published: 07 Aug 2008author: VEYR16WBugatti Veyron 1001hp monster car ! WOW IMPRESSIVE !Bugatti Veyron 1001hp monster car ! WOW IMPRESSIVE ! http://www.stayentertained.com
- published: 07 Aug 2008
- views: 1591852
- author: VEYR16W
2:05
BoxWrench Basic Engine Building Video -How to Repair DVDTo purchase these tools click here... http://store.boxwrench.net/Goodson-Short-Block-Pisto...published: 29 Sep 2009author: BoxWrenchBoxWrench Basic Engine Building Video -How to Repair DVDTo purchase these tools click here... http://store.boxwrench.net/Goodson-Short-Block-Piston-Install-Kit_p_89.html http://store.boxwrench.net/Automotive-Engine-Building-Tools_c_59.html Includes Goodson Tools:Piston Install Hammer - Piston Ring Expander Pliers - Piston Ring Compressor - Crank Turning Socket - Connecting Rod Bolt Protectors - This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Carburetor-Installation-amp-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. Check for even more tools being added here... http://store.boxwrench.net/Tools_c_21.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 202899
- author: BoxWrench
1:29
Cylinder Bore Honing - Engine Building Video - Hone Piston WallBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchCylinder Bore Honing - Engine Building Video - Hone Piston WallBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 28: Honing And finally we come to the main part of the machine shops job, honing the cylinder walls. It will do two things. First it will bring the cylinder walls to the matching diameter of the new pistons. Second it will leave a cross hatch pattern of light scratches, to keep oil on the walls and prevent metal on metal scraping. A dial bore gauge is used to bring it to the exact spec needed within 1/10,000th of an inch. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 904268
- author: BoxWrench
3:22
Cylinder Block Machining Video - Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchCylinder Block Machining Video - Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 25: Cylinder Block By this time your block is disassembled and in the machine shop. One of the most informative sections, here we take you behind the scenes to show what goes on while your away. We show the process of align honing the main bearing bore that is needed before anything else can be machined. Then the block deck is leveled and machined as needed for the new head gaskets to seat properly. And finally the cylinder walls are bored out just shy of their new size, which will be achieved when they're honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://www.boxwrench.net Educating the Automotive Enthusiast! Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 857925
- author: BoxWrench
3:04
Valve Lash Adjustment Video - Engine Building Car Repair DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchValve Lash Adjustment Video - Engine Building Car Repair DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 49: Valve Lash Adjustment You should have done this previously in the "Pre-Assembly" section. This time it's for real. You want to leave as much of the internal lubrication in place as possible. If you follow the firing order of your motor, you'll only have to turn the crankshaft one complete rotation. This section has some of the more detailed 3D models to show you the internals of a working motor. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 683581
- author: BoxWrench
2:36
Cylinder Head Valve Train Teardown Video-Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchCylinder Head Valve Train Teardown Video-Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 13: Valve Train The valve train is all of the engine parts, inside the cylinder head, that control the opening and closing of the valves. The camshaft, lifters, pushrods, rocker arms, and valve springs and the valves themselves, all make up the valve train in all motors. In this section we show the proper way to disassemble and organize the entire system. Gives example of rocker shafts on some motors. A great accessory for this is Goodson tools VTO 80 valve train organizer tray, to keep all your parts together in the right order. Also covers the certain tools you need like a Craftsman pick set, and a lifter extractor tool. Great shots of our marine engine and the sludge inside it before it went out to the machine shop! BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines.All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 450978
- author: BoxWrench
1:36
Camshaft Installation Video - Engine Building Car Repair DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchCamshaft Installation Video - Engine Building Car Repair DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 40: Camshaft Now that you're block is ready, onto the "Final Assembly" section of the video and installing your camshaft. We recommend Crane Cams. You will need all of your cam bearings installed first. You will need moly lube on the distributor drive gear and all of the lobes of your cam. To avoid a mess only do one section of lobes at a time and rest the cam on a journal to lube the next section. It should be freely rotating after installation. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 431550
- author: BoxWrench
4:45
Engine Ignition: Wiring Distributor & Spark Plugs Video- DVDClick to buy a "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Buildin...published: 29 Sep 2009author: BoxWrenchEngine Ignition: Wiring Distributor & Spark Plugs Video- DVDClick to buy a "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 53: Ignition The second part of the "Ignition" section shows you how to find the initial timing of your engine, with or with out a top dead center whistle. You need to know your firing order and distributor rotation direction. Then we'll show you how to set the distributor cap right, using the #1 cylinder in your firing order. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 389451
- author: BoxWrench
2:33
How to Install Distributor Video-Engine Building Repair DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchHow to Install Distributor Video-Engine Building Repair DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 53: Ignition This section of "Final Assembly" covers installing your distributor. This can be tricky. The distributor gear has to meet the cam gear and connect with the oil pump drive shaft. Take your time and you'll get it. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 383938
- author: BoxWrench
4:16
Engine Building Video - Piston Removal - Chevy V8 Small BlockBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchEngine Building Video - Piston Removal - Chevy V8 Small BlockBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 17: Pistons By this section you'll be ready to remove the pistons, starting with the rod caps. You'll also get to see the crankshaft, rod bearings and journals for the first time and inspect them for damage as they come out. Great tips on protecting the cylinder bore while removing the pistons and connecting rods. We don't recommend using a ridge reamer to make this easier. As your block will need to go the a machine shop anyway. They are likely to damage your cylinder walls and are hard to use. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 272332
- author: BoxWrench
1:55
Camshaft Break In Procedure Video - Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchCamshaft Break In Procedure Video - Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html http://store.boxwrench.net/Basic-Engine-Building_c_35.html Basic Engine Building DVD - Chapter 60: Camshaft Break-In If you have a new camshaft, the break-in procedure is critical. Follow our guidelines and you won't flatten a cam lobe and ruin the internals of your engine. The basic formula is 20 minutes @2000 rpms and never going below 1500 rpms. Make sure not to let it idle. Changing from 1500 to 2500 rpm every few minutes will help the cam break-in as well. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 271457
- author: BoxWrench
1:38
Connecting Rods Machine Shop Video-Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchConnecting Rods Machine Shop Video-Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 27: Connecting Rods By now the connecting rods are ready for pistons. We recommend having the machine shop clean your old pistons for you, if you plan to reuse them. It's not fun at all by hand. Here we show you how they install the rod pins into the connecting rods to connect with the pistons. Then they will measure the pistons to determine the final bore size of the cylinder walls before they are honed. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. http://www.boxwrench.net Educating the Automotive Enthusiast BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 322310
- author: BoxWrench
3:30
Ford 351 Windsor Small Block Engine - Water in Oil MysteryBehind the scenes of "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-B...published: 29 Sep 2009author: BoxWrenchFord 351 Windsor Small Block Engine - Water in Oil MysteryBehind the scenes of "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html A special internet only treat from the producers of the BoxWrench Series! Basic Engine Building DVD - Behind the Scenes: Small Block Ford 351 Windsor Diagnosis We gonna show you some never before seen footage from the filthy Ford 351W we pulled out of a boat. BoxWrench Director Brent Bye recaps the story of discovering the engines problem and what ensued as the tear down process proceeded. Basically salt water was leaking into a cylinder head thru some hidden steel water plugs that only these small block 351 W motors have. Being a marine engine they needed to be replaced with rust proof brass plugs. After running for 5 years the water eroded holes straight thru them. Water pressurized from the water pump was squirting into the cylinder heads right onto the rocker arms, valves and valve springs, ultimately all the way down to the oil pan and crankcase. It all made out for a surprising tear down. This particular Ford 351 Windsor marine motor was fully rebuild on camera in the "Basic Engine Building" DVD. Even a catastrophic blown engine like this can be rebuilt with the proper knowledge and tools. The BoxWrench Series is designed to give you that knowledge and let you have fun with it. The full DVD with all of the interactive menus, Tools section and engine Glossary terms is available here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_0-8.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench DVD Store: http://store.boxwrench.net/DVD-Video_c_14.html http://www.boxwrench.net - Educating the Automotive Enthusiast! BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 182567
- author: BoxWrench
1:54
Fuel & Water Pump Thermostat Video-Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p...published: 29 Sep 2009author: BoxWrenchFuel & Water Pump Thermostat Video-Engine Building DVDBuy the "Basic Engine Building" DVD http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Basic Engine Building DVD - Chapter 51: Engine Externals A quick clip on installing external components like your fuel pump, water pump, and thermostat housing. It's usually easiest to have the harmonic balancer set at top dead center for your fuel pump. BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final assembly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines. All of the interactive features and menus will not work over YouTube. This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating. Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here... http://store.boxwrench.net/Basic-Engine-Building-DVD_p_8.html Don't forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here... http://store.boxwrench.net/Holley-Install-Tuning-DVD_p_12.html New Transmission DVDs and a Differential Rebuilding DVD just added. BoxWrench Store: http://store.boxwrench.net/ BoxWrench on Facebook: http://www.facebook.com/boxwrench
- published: 29 Sep 2009
- views: 149929
- author: BoxWrench
Vimeo results:5:47
The City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro....published: 20 Feb 2012author: Jarbas AgnelliThe City of SambaShortlisted at the Vimeo Awards 2012. Tilt shift of the Carnaval party in Rio de Janeiro. Soundtrack available here: http://tinyurl.com/6mrzndl Made by Keith Loutit and Jarbas Agnelli. Captured during Carnaval of 2011. Music by Jarbas Agnelli. Special thanks to Rede Globo, Liesa and Jodele Larcher. Extra thanks to Aguinaldo Rocca (producer) and Nick Graham-Smith (recording engineer). Thanks also to Guto Vaz, Marcio Avila and Duda M. for supporting us on the ground. keithloutit.com adstudio.com.br4:28
ProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory han...published: 18 Feb 2010author: Johnny KellyProcrastinationGraduation film from the Royal College of Art, 2007. An investigative and exploratory hands-on gloves-off study into the practice of putting things 'off''. Sometimes the only way to get something done is to do two dozen other things first. Story, Animation, Direction: Johnny Kelly Voice Over: Bryan Quinn Sound Supervision: Mike Wyeld Foley Artist: Sue Harding Foley Engineer: John Mark Foley recorded at Fonic Studios, London The film is distributed by Dazzle Films www.dazzlefilms.co.uk www.mickeyandjohnny.com www.mikewyeld.com2:24
Timelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done us...published: 23 Aug 2010author: Mike FloresTimelapse MontageA montage of my timelapse shots through the summer of 2010. The dolly moves were done using two custom track and dolly systems that I engineered, utilizing off the shelf components with a bit of custom fabrication. My primary system consists of a set of Mumford rotary tables with a Time Machine for the motion control programming. The secondary system consisted of a lower tech servo city DC motor. Music is by Hans Zimmer, "Dream is Collapsing" from the Inception soundtrack.3:18
NightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making t...published: 09 Aug 2012author: Colin RichNightFallIf you enjoyed watching the video, consider donating to the tip jar so I can keep making these things. Thanks! Colin Music: M83, "Echoes of Mine" off of 'Hurry Up, We're Dreaming.' Available from Mute Records, EMI Music Download the song/album here here: itunes.apple.com/us/album/midnight-city Cinematography, Direction, and Editing by: Colin Rich: https://www.facebook.com/colinrich1 Produced by Pacific Star Productions www.pacstarpro.com A big thanks to Matthews MSE (www.msegrip.com) especially to Bob Kulesh, Tyler & Ed Phillips for their generous support and patience of this lengthy endeavor. Most of the linear motion control shots were captured using their FloatCam DC Slider, a wonderful piece of engineering for the time lapse world. 'Nightfall' is a three minute tour of light through the City of Angels. I shot "Nightfall" in an attempt to capture Los Angeles as it transitioned from day to night. As you probably know, LA is an expansive city so shooting it from many different angles was critical. Usually I was able to capture just one shot per day with a lot of driving, exploring, and scouting in between but the times sitting in traffic or a "sketchy" neighborhood often lead to new adventures and interesting places. Nightfall in particular is my favorite time to shoot time lapse. Capturing the transition from day to night while looking back at the city as the purple shadow of Earth envelopes the eastern skyline and the warm distant twinkling halogen lights spark to life and give the fading sun a run for her money- this will never grow old or boring to me. In this piece, it was important to me for the shots to both capture and accentuate the movement of light through the day and night and the use of multiple motion control techniques allowed me to do so. I hope you enjoy watching it as much as I enjoyed creating it. An English translation of the lyrics- "It is late. I am looking for my other home, taking an unfamiliar path: a small trail near the factories and the city, cutting through the forest. I can barely see nature when suddenly, night falls. I am engulfed by a world of silence, yet I am not afraid. I fall asleep for a few minutes at the most, and when I wake up, the sun is there and the forest is shining with a bright light. I recognize this forest. It is not an ordinary forest, it is a forest of memories. My memories. The white and noisy river, my adolescence. The tall trees, the men I have loved. The birds in flight, and in the distance, my lost father. My memories aren't memories anymore. They are there, with me, dancing and embracing, singing and smiling at me. I look at my hands. I caress my face, and I am 20 years old. And I love like I have never loved before."
Al Jazeeraphoto: AP / Lefteris Pitarakis
30 Nov 2012- For historians, it represents a treasure trove of boundless rewards and an opportunity to revisit some of the most enduring myths about Britain's colonial past. But for some of those still living with the physical and psychological scars, the release of thousands of previously secret government-held documents offers fresh hope of finally gaining a measure of justice for their suffering under British rule ... 1096 Source.. Al Jazeera ... ;">....(size: 22.4Kb)BBC Newsphoto: USAF / Senior Airman Patrice Clarke
02 Dec 2012There have been "multiple explosions" near an airfield at a US base in eastern Afghanistan, Nato has said. Afghan intelligence officials told the BBC seven suicide attackers targeted the base in Jalalabad, and witnesses said that gunfire was heard ... Counter claims ... There were no Nato casualties in the attack, officials said ... ....(size: 1.7Kb)WorldNews.comphoto: UN / Shareef Sarhan
02 Dec 2012Article by WN.com Guest Writer Gilad Atzmon. Israel suffered a humiliating defeat at The UN recently. The nations of the world stood up and said NO to the Jewish state - NO to Israeli occupation, NO to Israeli human rights abuse, NO to Jewish racism. In effect, they stood up and confessed to serious Zio-fatigue ... This is a very good news indeed. But interestingly, this united opposition to Israel is not in response to Israeli strength ... ....(size: 2.6Kb)WorldNews.comphoto: AP / Patrick Semansky
02 Dec 2012Article by WN.com Correspondent Dallas Darling. Much like the United States, the Vikings were a paradoxical and duplicitous civilization. Not only were they highly skilled shipbuilders and tremendous explorers, not to mention their expertise in the fishing, farming and trading industries, but they helped establish and contribute to the nation-states of France, England, Ireland, Germany, Russia, and Iceland ... This came to mind when Pfc....(size: 5.5Kb)WorldNews.comphoto: US NARA
30 Nov 2012Article by WN.com Correspondent Dallas Darling. Staring at the quote on the small granite monument which read. "They said to one another, behold here comes the dreamer...Let us slay him...And we shall see what will become of his dreams," I tried to understand that fateful moment when a shot shattered heaven and earth ... Martin Luther King, Jr. Straining my ears, I tried to hear Rev. Abernathy cry out, "Oh my God, Martin's been shot!" ... Dr....(size: 6.5Kb)
noodls03 Dec 2012"More than 300 people are expected to attend this event over the next three days, including engineering academics, academics from other STEM disciplines that teach engineering students, professional engineers, undergraduate and postgraduate engineering students and engineering support staff." ... of Engineering, University of Pittsburgh, USA....(size: 3.8Kb)noodls03 Dec 2012Shuming Nie, Coulter Department of Biomedical Engineering at Georgia Tech and Emory University ... Andrés Garcia, Woodruff School of Mechanical Engineering. For distinguished contributions to the field of biomaterials and regenerative medicine, particularly for the engineering of materials for therapeutic and cell delivery and tissue repair ... Mohan Srinivasarao, School of Materials Science & Engineering....(size: 3.6Kb)Clarion Ledger03 Dec 2012The report says dirty water similar to that left behind after dousing a fire was found in part of the engine ... Water in fuel could make the engine sputter, as reported by witnesses, and could have contributed to the crash ... The single-engine Piper PA-32 crashed into a home in west Jackson just after taking off from Hawkins Field ... Less than two minutes after takeoff, the pilot radioed back to the airport, saying, We got an engine problem....(size: 2.1Kb)noodls03 Dec 2012Aberdeen, United Kingdom (3 December 2012) - AMEC, the international engineering and project management company, has been appointed by Talisman Energy (UK) Limited to provide brownfield engineering, procurement, construction and commissioning services in support of their UK brownfield topsides projects....(size: 3.5Kb)Scoop03 Dec 2012CPT's own engineers will also be further considering deconstruction options ... o Early January 2013 - It is hoped CPT will receive feedback from CERA and its own engineering review of deconstruction options as well as feedback from the Cathedral Project Group on the work it is undertaking ... and engineering matters, including options for deconstruction....(size: 3.1Kb)noodls03 Dec 2012The award was announced by the Japan Car of the Year committee on November 29, 2012. The CX-5 was the first model to adopt the full suite of Mazda's SKYACTIV technologies including the engine, transmission, body and chassis ... The CX-5 equipped with Mazda's new-generation SKYACTIV-D clean diesel engine boasts powerful driving comparable to a 4.0-litre V8 petrol engine vehicle thanks to 420 N-m of maximum torque ... distributed by ... (noodl....(size: 3.0Kb)noodls03 Dec 2012Army Corps of Engineers and the Federal Emergency Management Agency to sign a right-of-entry form for debris removal ... "Before we have authority to pick up anything off private property, we have to get a signed [ROE] from the homeowner or landowner," said Josh Jimerfield, a debris engineer for the Army Corps New York Recovery Field Office....(size: 5.5Kb)PR Newswire03 Dec 2012The acquisition increases Synopsys' investment in by growing local engineering expertise, technology development capabilities and customer support ... As a leader in electronic design automation (EDA) and semiconductor IP, its software, IP and services help engineers address their design, verification, system and manufacturing challenges....(size: 5.7Kb)noodls03 Dec 2012Entry-level Forester 2.0i and 2.0i-L also offer a sophisticated six-speed manual for the first time, linked to an efficient new generation 2.0-litre horizontally-opposed Boxer engine. Normally aspirated automatic Forester 2.5i, 2.5i-L and 2.5i-S feature the new generation 2.5-litre engine ... All Forester engines comply with strict EURO5 emission standards....(size: 6.2Kb)San Francisco Chronicle03 Dec 2012San Diego Cal (PRWEB) December 02, 2012 ... The website also offers training on techniques to increase internet marketing exposure for individual listings and tips to get photos and videos to show up in some of the major internet search engines ... DirectPlacement.co for help with Search Engine Placement (SEP). Visit DirectPlacement.co and ask about search engine placement (SEP) for the bobzio.com vacation property listing or home exchange....(size: 3.0Kb)Scoop03 Dec 2012Monday, 3 December 2012, 4.34 pm. Press Release. Blackwell's Department Store ... Chartered Professional Engineer Warren Lewis from Christchurch firm Lewis & Barrow says the building has been designed for all up-to-the-minute design codes, Government guidelines, and the Structural Engineering Society New Zealand design guidelines ... There have been many complex geotechnical, engineering, consent and insurance issues to work through ... ENDS ... ....(size: 3.9Kb)Chosunilbo03 Dec 2012KARI researchers alongside civilian engineers began an overhaul of the rocket on Saturday after cancelling the planned launch on Thursday at the last minute ... KARI manufactured three second-stage rockets in April 2008 ... "The Korean engineers have yet to accumulate enough experience to detect such problems well in advance." ... ....(size: 1.5Kb)Jakarta Post03 Dec 2012Paper Edition . Page. 6. No issues have attracted as much attention for the last few days as outsourcing and the minimum wage. Rallies by workers for the elimination of outsourcing have crippled production ... He needs a civil engineer and construction workers to build the factory ... Soon after the factory is completed, what the business owner needs is a mechanical engineer to handle factory machines, not a civil engineer ... another company ... ....(size: 5.6Kb)This article is about a machine to convert energy into useful mechanical motion. For other uses of engine, see Engine (disambiguation). For other uses of motor, see Motor (disambiguation).
An engine or motor is a machine designed to convert energy into useful mechanical motion.[1][2] Heat engines, including internal combustion engines and external combustion engines (such as steam engines) burn a fuel to create heat which is then used to create motion. Electric motors convert electrical energy into mechanical motion, pneumatic motors use compressed air and others, such as clockwork motors in wind-up toys use elastic energy. In biological systems, molecular motors like myosins in muscles use chemical energy to create motion.
Contents
Terminology[link]
Originally an engine was a mechanical device that converted force into motion. Military devices such as catapults, trebuchets and battering rams are referred to as siege engines. The term "gin" as in cotton gin is recognised as a short form of the Old French word engin, in turn from the Latin ingenium, related to ingenious. Most devices used in the industrial revolution were referred to as engines, and this is where the steam engine gained its name.[citation needed]
In modern usage, the term is used to describe devices capable of performing mechanical work, as in the original steam engine. In most cases the work is produced by exerting a torque or linear force, which is used to operate other machinery which can generate electricity, pump water, or compress gas. In the context of propulsion systems, an air-breathing engine is one that uses atmospheric air to oxidise the fuel carried rather than supplying an independent oxidizer, as in a rocket.
In common usage, an engine burns or otherwise consumes fuel, and is differentiated from an electric machine (i.e., electric motor) that derives power without changing the composition of matter.[3] A heat engine may also serve as a prime mover, a component that transforms the flow or changes in pressure of a fluid into mechanical energy.[4] An automobile powered by an internal combustion engine may make use of various motors and pumps, but ultimately all such devices derive their power from the engine.
The term motor was originally used to distinguish the new internal combustion engine-powered vehicles from earlier vehicles powered by steam engines, such as the steam roller and motor roller, but may be used to refer to any engine.[citation needed]
Devices converting heat energy into motion are commonly referred to simply as engines.[5]
History[link]
Antiquity[link]
Simple machines, such as the club and oar (examples of the lever), are prehistoric. More complex engines using human power, animal power, water power, wind power and even steam power date back to antiquity. Human power was focused by the use of simple engines, such as the capstan, windlass or treadmill, and with ropes, pulleys, and block and tackle arrangements; this power was transmitted usually with the forces multiplied and the speed reduced. These were used in cranes and aboard ships in Ancient Greece, as well as in mines, water pumps and siege engines in Ancient Rome. The writers of those times, including Vitruvius, Frontinus and Pliny the Elder, treat these engines as commonplace, so their invention may be more ancient. By the 1st century AD, cattle and horses were used in mills, driving machines similar to those powered by humans in earlier times.
According to Strabo, a water powered mill was built in Kaberia of the kingdom of Mithridates during the 1st century BC. Use of water wheels in mills spread throughout the Roman Empire over the next few centuries. Some were quite complex, with aqueducts, dams, and sluices to maintain and channel the water, along with systems of gears, or toothed-wheels made of wood and metal to regulate the speed of rotation. In a poem by Ausonius in the 4th century AD, he mentions a stone-cutting saw powered by water. Hero of Alexandria is credited with many such wind and steam powered machines in the 1st century AD, including the Aeolipile, but it is not known if any of these were put to practical use.
Medieval[link]
Medieval Muslim engineers employed gears in mills and water-raising machines, and used dams as a source of water power to provide additional power to watermills and water-raising machines.[6] Such advances made it possible for many industrial tasks that were previously driven by manual labour to be mechanized and driven by machinery to some extent in the medieval Islamic world.
In 1206, al-Jazari employed a crank-conrod system for two of his water-raising machines. A rudimentary steam turbine device was described by Taqi al-Din[6] in 1551 and by Giovanni Branca[7] in 1629.[8]
In the 13th century, the solid rocket motor was invented in China. Driven by gunpowder, this, the simplest form of internal combustion engine was unable to deliver sustained power, but was useful for propelling weaponry at high speeds towards enemies in battle and for fireworks. After invention, this innovation spread throughout Europe.
Industrial Revolution[link]
Boulton & Watt engine of 1788
The Watt steam engine was the first type of steam engine to make use of steam at a pressure just above atmospheric to drive the piston helped by a partial vacuum. Improving on the design of the 1712 Newcomen steam engine, the Watt steam engine, developed sporadically from 1763 to 1775, was a great step in the development of the steam engine. Offering a dramatic increase in fuel efficiency, James Watt's design became synonymous with steam engines, due in no small part to his business partner, Matthew Boulton. It enabled rapid development of efficient semi-automated factories on a previously unimaginable scale in places where waterpower was not available. Later development led to steam locomotives and great expansion of railway transportation.
As for internal combustion piston engines, these were tested in France in 1807 by de Rivaz and independently, by the Niépce brothers . They were theoretically advanced by Carnot in 1824.[citation needed] The Otto cycle in 1877 was capable of giving a far higher power to weight ratio than steam engines and worked much better for many transportation applications such as cars and aircraft.
Automobiles[link]
The first commercially successful automobile, created by Karl Benz, added to the interest in light and powerful engines. The lightweight petrol internal combustion engine, operating on a four-stroke Otto cycle, has been the most successful for light automobiles, while the more efficient Diesel engine is used for trucks and buses.
Horizontally opposed pistons[link]
In 1896, Karl Benz was granted a patent for his design of the first engine with horizontally opposed pistons. His design created an engine in which the corresponding pistons move in horizontal cylinders and reach top dead center simultaneously, thus automatically balancing each other with respect to their individual momentum. Engines of this design are often referred to as flat engines because of their shape and lower profile. They are or were used in: the Volkswagen Beetle, some Porsche and Subaru cars, many BMW and Honda motorcycles, and aircraft engines (for propeller driven aircraft), etc.
Advancement[link]
Continuance of the use of the internal combustion engine for automobiles is partly due to the improvement of engine control systems (onboard computers providing engine management processes, and electronically controlled fuel injection). Forced air induction by turbocharging and supercharging have increased power outputs and engine efficiencies. Similar changes have been applied to smaller diesel engines giving them almost the same power characteristics as petrol engines. This is especially evident with the popularity of smaller diesel engine propelled cars in Europe. Larger diesel engines are still often used in trucks and heavy machinery, although they require special machining not available in most factories. They do not burn as clean as gasoline engines, however they have far more torque. The internal combustion engine was originally selected for the automobile due to its flexibility over a wide range of speeds. Also, the power developed for a given weight engine was reasonable; it could be produced by economical mass-production methods; and it used a readily available, moderately priced fuel - petrol.
Increasing power[link]
The first half of the 20th century saw a trend to increasing engine power, particularly in the American models. Design changes incorporated all known methods of raising engine capacity, including increasing the pressure in the cylinders to improve efficiency, increasing the size of the engine, and increasing the speed at which power is generated. The higher forces and pressures created by these changes created engine vibration and size problems that led to stiffer, more compact engines with V and opposed cylinder layouts replacing longer straight-line arrangements.
Combustion efficiency[link]
The design principles favoured in Europe, because of economic and other restraints such as smaller and twistier roads, leant toward smaller cars and corresponding to the design principles that concentrated on increasing the combustion efficiency of smaller engines. This produced more economical engines with earlier four-cylinder designs rated at 40 horsepower (30 kW) and six-cylinder designs rated as low as 80 horsepower (60 kW), compared with the large volume V-8 American engines with power ratings in the range from 250 to 350 hp (190 to 260 kW).[citation needed]
Engine configuration[link]
Earlier automobile engine development produced a much larger range of engines than is in common use today. Engines have ranged from 1- to 16-cylinder designs with corresponding differences in overall size, weight, piston displacement, and cylinder bores. Four cylinders and power ratings from 19 to 120 hp (14 to 90 kW) were followed in a majority of the models. Several three-cylinder, two-stroke-cycle models were built while most engines had straight or in-line cylinders. There were several V-type models and horizontally opposed two- and four-cylinder makes too. Overhead camshafts were frequently employed. The smaller engines were commonly air-cooled and located at the rear of the vehicle; compression ratios were relatively low. The 1970s and '80s saw an increased interest in improved fuel economy which brought in a return to smaller V-6 and four-cylinder layouts, with as many as five valves per cylinder to improve efficiency. The Bugatti Veyron 16.4 operates with a W16 engine meaning that two V8 cylinder layouts are positioned next to each other to create the W shape sharing the same crankshaft.
The largest internal combustion engine ever built is the Wärtsilä-Sulzer RTA96-C, a 14-cylinder, 2-stroke turbocharged diesel engine that was designed to power the Emma Maersk, the largest container ship in the world. This engine weighs 2300 tons, and when running at 102 RPM produces 109,000 bhp (80,080 kW) consuming some 13.7 tons of fuel each hour.
Heat engine[link]
Main article: heat engineCombustion engine[link]
Combustion engines are heat engines driven by the heat of a combustion process.
Internal combustion engine[link]
Main article: Internal Combustion Engine
Animation showing the four stages of the 4-stroke combustion engine cycle:
1. Induction (Fuel enters)
2. Compression
3. Ignition (Fuel is burnt)
4. Emission (Exhaust out)The internal combustion engine is an engine in which the combustion of a fuel (generally, fossil fuel) occurs with an oxidizer (usually air) in a combustion chamber. In an internal combustion engine the expansion of the high temperature and high pressure gases, which are produced by the combustion, directly applies force to components of the engine, such as the pistons or turbine blades or a nozzle, and by moving it over a distance, generates useful mechanical energy.[9][10][11][12]
External combustion engine[link]
Main article: external combustion engineAn external combustion engine (EC engine) is a heat engine where an internal working fluid is heated by combustion of an external source, through the engine wall or a heat exchanger. The fluid then, by expanding and acting on the mechanism of the engine produces motion and usable work.[13] The fluid is then cooled, compressed and reused (closed cycle), or (less commonly) dumped, and cool fluid pulled in (open cycle air engine).
"Combustion" refers to burning fuel with an oxidizer, to supply the heat. Engines of similar (or even identical) configuration and operation may use a supply of heat from other sources such as nuclear, solar, geothermal or exothermic reactions not involving combustion; but are not then strictly classed as external combustion engines, but as external thermal engines.
The working fluid can be a gas as in a Stirling engine, or steam as in a steam engine or an organic liquid such as n-pentane in an Organic Rankine cycle. The fluid can be of any composition; gas is by far the most common, although even single-phase liquid is sometimes used. In the case of the steam engine, the fluid changes phases between liquid and gas...
Air-breathing combustion engines[link]
Air-breathing engines are combustion engines that use the oxygen in atmospheric air to oxidise ('burn') the fuel carried, rather than carrying an oxidiser, as in a rocket. Theoretically, this should result in a better specific impulse than for rocket engines.
A continuous stream of air flows through the Air-breathing engine. This air is compressed, mixed with fuel, ignited and expelled as the exhaust gas.
- Examples
Typical air-breathing engines include:
Environmental effects[link]
The operation of engines typically has a negative impact upon air quality and ambient sound levels. There has been a growing emphasis on the pollution producing features of automotive power systems. This has created new interest in alternate power sources and internal-combustion engine refinements. Although a few limited-production battery-powered electric vehicles have appeared, they have not proved to be competitive owing to costs and operating characteristics. In the 21st century the diesel engine has been increasing in popularity with automobile owners. However, the gasoline engine, with its new emission-control devices to improve emission performance, has not yet been significantly challenged.
Air quality[link]
Exhaust from a spark ignition engine consists of the following: nitrogen 70 to 75% (by volume), water vapor 10 to 12%, carbon dioxide 10 to 13.5%, hydrogen 0.5 to 2%, oxygen 0.2 to 2%, carbon monoxide: 0.1 to 6%, unburnt hydrocarbons and partial oxidation products (e.g. aldehydes) 0.5 to 1%, nitrogen monoxide 0.01 to 0.4%, nitrous oxide <100 ppm, sulfur dioxide 15 to 60 ppm, traces of other compounds such as fuel additives and lubricants, also halogen and metallic compounds, and other particles.[14] Carbon monoxide is highly toxic, and can cause carbon monoxide poisoning, so it is important to avoid any build-up of the gas in a confined space. Catalytic converters can reduce toxic emissions, but not completely eliminate them. Also, resulting greenhouse gas emissions, chiefly carbon dioxide, from the widespread use of engines in the modern industrialized world is contributing to the global greenhouse effect – a primary concern regarding global warming.
Noncombustive heat engines[link]
Main article: heat engineSome engines convert heat from noncombustive processes into mechanical work, for example a nuclear power plant uses the heat from the nuclear reaction to produce steam and drive a steam engine, or a gas turbine in a rocket engine may be driven by decomposing hydrogen peroxide. Apart from the different energy source, the engine is often engineered much the same as an internal or external combustion engine.
Nonthermal chemically powered motor[link]
Nonthermal motors usually are powered by a chemical reaction, but are not heat engines. Examples include:
- Molecular motor - motors found in living things
- Synthetic molecular motor
Electric motor[link]
Main article: electric motorAn electric motor uses electrical energy to produce mechanical energy, usually through the interaction of magnetic fields and current-carrying conductors. The reverse process, producing electrical energy from mechanical energy, is accomplished by a generator or dynamo. Traction motors used on vehicles often perform both tasks. Electric motors can be run as generators and vice versa, although this is not always practical. Electric motors are ubiquitous, being found in applications as diverse as industrial fans, blowers and pumps, machine tools, household appliances, power tools, and disk drives. They may be powered by direct current (for example a battery powered portable device or motor vehicle), or by alternating current from a central electrical distribution grid. The smallest motors may be found in electric wristwatches. Medium-size motors of highly standardized dimensions and characteristics provide convenient mechanical power for industrial uses. The very largest electric motors are used for propulsion of large ships, and for such purposes as pipeline compressors, with ratings in the thousands of kilowatts. Electric motors may be classified by the source of electric power, by their internal construction, and by their application.
The physical principle of production of mechanical force by the interactions of an electric current and a magnetic field was known as early as 1821. Electric motors of increasing efficiency were constructed throughout the 19th century, but commercial exploitation of electric motors on a large scale required efficient electrical generators and electrical distribution networks.
To reduce the electric energy consumption from motors and their associated carbon footprints, various regulatory authorities in many countries have introduced and implemented legislation to encourage the manufacture and use of higher efficiency electric motors. A well-designed motor can convert over 90% of its input energy into useful power for decades.[15] When the efficiency of a motor is raised by even a few percentage points, the savings, in kilowatt hours (and therefore in cost), are enormous. The electrical energy efficiency of a typical industrial induction motor can be improved by: 1) reducing the electrical losses in the stator windings (e.g., by increasing the cross-sectional area of the conductor, improving the winding technique, and using materials with higher electrical conductivities, such as copper), 2) reducing the electrical losses in the rotor coil or casting (e.g., by using materials with higher electrical conductivities, such as copper), 3) reducing magnetic losses by using better quality magnetic steel, 4) improving the aerodynamics of motors to reduce mechanical windage losses, 5) improving bearings to reduce friction losses, and 6) minimizing manufacturing tolerances. For further discussion on this subject, see Premium efficiency and Copper in energy efficient motors.)
By convention, electric engine refers to a railroad electric locomotive, rather than an electric motor.
Physically powered motor[link]
Some motors are powered by potential energy, for example some funiculars, gravity plane and ropeway conveyors have used potential energy of water or rocks, and some clocks have a weight that falls under gravity. Other forms of potential energy include compressed gases (such as pneumatic motors), springs (clockwork motors) and elastic bands.
Historic military siege engines included large catapults, trebuchets, and (to some extent) battering rams were powered by potential energy.
Pneumatic motor[link]
Main article: Pneumatic motorA pneumatic motor is a machine which converts potential energy in the form of compressed air into mechanical work. Pneumatic motors generally convert the compressed air to mechanical work though either linear or rotary motion. Linear motion can come from either a diaphragm or piston actuator, while rotary motion is supplied by either a vane type air motor or piston air motor. Pneumatic motors have found widespread success in the hand-held tool industry and continual attempts are being made to expand their use to the transportation industry. However, pneumatic motors must overcome efficiency deficiencies before being seen as a viable option in the transportation industry.
Hydraulic motor[link]
Main article: Hydraulic motorA hydraulic motor is one that derives its power from a pressurized fluid. This type of engine can be used to move heavy loads or produce motion.[16]
Sound levels[link]
In the case of sound levels, engine operation is of greatest impact with respect to mobile sources such as automobiles and trucks. Engine noise is a particularly large component of mobile source noise for vehicles operating at lower speeds, where aerodynamic and tire noise is less significant.[17] Petrol and diesel engines are fitted with mufflers (silencers) to reduce noise.
Efficiency[link]
Main article: Engine efficiencyDepending on the type of engine employed, different rates of efficiency are attained.
The energy of traditional heat engine, doing work only one-dimensional in three-dimensional thermal motion, mechanics, 1/3, so the efficiency of heat engine, usually 1/3, 33% = η, the rest of the 2-D, 66%, as uselessthe heat is wasted.[18][19]
Engines by use[link]
Particularly notable kinds of engines include:
- Aircraft engine
- Automobile engine
- model engine
- Motorcycle engine
- Marine propulsion engines such as Outboard motor
- Railway locomotive engine
- Spacecraft propulsion engines such as Rocket engine
- Traction engine
Engine speed[link]
Engine speed is measured in revolutions per minute (RPM). Engines may be classified as low-speed, medium-speed or high-speed but these terms are inexact and depend on the type of engine being described.
See also[link]
- Machine
- Timeline of motor and engine technology
- Timeline of heat engine technology
- Motor
- Multifuel
- Turbine
- Air engine
- Hydraulic engine
- Engine test stand
References[link]
- ^ "Motor". Dictionary.reference.com. http://dictionary.reference.com/browse/motor. Retrieved 2011-05-09. "a person or thing that imparts motion, esp. a contrivance, as a steam engine, that receives and modifies energy from some natural source in order to utilize it in driving machinery."
- ^ Dictionary.com: (World heritage) "3. any device that converts another form of energy into mechanical energy so as to produce motion"
- ^ "Engine", McGraw-Hill Concise Encyclopedia of Science and Technology, Third Edition, Sybil P. Parker, ed. McGraw-Hill, Inc., 1994, p. 714.
- ^ "Prime mover", McGraw-Hill Concise Encyclopedia of Science and Technology, Third Edition, Sybil P. Parker, ed. McGraw-Hill, Inc., 1994, p. 1498.
- ^ Collins English Dictionary - Complete & Unabridged 10th Edition
- ^ a b Ahmad Y Hassan, Transfer Of Islamic Technology To The West, Part II: Transmission Of Islamic Engineering
- ^ "University of Rochester, NY, ''The growth of the steam engine'' online history resource, chapter one". History.rochester.edu. http://www.history.rochester.edu/steam/thurston/1878/Chapter1.html. Retrieved 2010-02-03.
- ^ "Power plant engineering". P. K. Nag (2002). Tata McGraw-Hill. p.432. ISBN 0-07-043599-5
- ^ Proctor II, Charles Lafayette. "Internal Combustion engines". Encyclopædia Britannica Online. http://www.britannica.com/EBchecked/topic/290504/internal-combustion-engine. Retrieved 2011-05-09.
- ^ "Internal combustion engine". Answers.com. http://www.answers.com/topic/internal-combustion-engine?cat=technology. Retrieved 2011-05-09.
- ^ "Columbia encyclopedia: Internal combustion engine". Inventors.about.com. http://inventors.about.com/gi/dynamic/offsite.htm?site=http://www.bartleby.com/65/in/intern-co.html. Retrieved 2011-05-09.
- ^ "Internal-combustion engine". Infoplease.com. 2007. http://www.infoplease.com/ce6/sci/A0825332.html. Retrieved 2011-05-09.
- ^ "External combustion". Merriam-Webster Online Dictionary. 2010-08-13. http://www.merriam-webster.com/dictionary/external%20combustion. Retrieved 2011-05-09.
- ^ Paul Degobert, Society of Automotive Engineers (1995), Automobiles and Pollution
- ^ "Motors". American Council for an Energy-Efficient Economy. http://www.aceee.org/topics/motors
- ^ "Howstuffworks "Engineering"". Reference.howstuffworks.com. 2006-01-29. http://reference.howstuffworks.com/hydraulic-engine-encyclopedia.htm. Retrieved 2011-05-09.
- ^ Hogan, C. Michael (September 1973). "Analysis of Highway Noise". Journal of Water, Air, and Soil Pollution (Springer Verlag) 2 (3): 387–392. ISSN 0049-6979. http://www.springerlink.com/content/x1707075n815g604/. Retrieved 2011-05-09.
- ^ Deng Yu，Deng Hai，热效率趋向100%的能量利用新途径I:从无序到有序，中国工程热物理学会，工程热力学与能源利用学术会议，1994
- ^ 邓宇，邓海，热效率趋向100%的能量利用新途径II:量子化内能的分解及有序化的演变，中国工程热物理学会，工程热力学与能源利用学术会议，1994
- J. G. Landels, Engineering in the Ancient World, ISBN 0-520-04127-5
External links[link]
Wikimedia Commons has media related to: Engines 
Look up engine in Wiktionary, the free dictionary. Look up motor in Wiktionary, the free dictionary. - U.S. Patent 194,047
- Detailed Engine Animations
- How Car Engines Work
- Animated Engines, four-stroke another explanation of the four-stroke engine
- CDX eTextbook – some videos of car components in action
- Video from inside a four-stroke engine cylinder.
- Working 4-Stroke Engine - Animation
- Animated illustrations of various engines
- Aircraft Engine Photographic Reference – includes specifications
- JDM B16a Engines Information Site
- Kinematic Models for Design Digital Library (KMODDL) - Movies and photos of hundreds of working mechanical-systems models at Cornell University. Also includes an e-book library of classic texts on mechanical design and engineering.
- 5 Ways to Redesign the Internal Combustion Engine
External combustion cycles - Without phase change (hot air engines)
- With phase change
Internal combustion cycles Mixed cycles Refrigeration cycles Uncategorized http://wn.com/Engine
Related pages:
http://it.wn.com/Motore
http://cs.wn.com/Motor
http://id.wn.com/Motor
http://es.wn.com/Motor
http://ru.wn.com/Двигатель
http://nl.wn.com/Motor
http://pl.wn.com/Silnik
http://fr.wn.com/Moteur
http://hi.wn.com/इंजन
http://pt.wn.com/Motor
http://de.wn.com/Motor
This page contains text from Wikipedia, the Free Encyclopedia - http://en.wikipedia.org/wiki/Engine
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2009) 
It has been suggested that Miniature internal combustion engine be merged into this article or section. (Discuss) Proposed since February 2012. - For the band (previously known as Black Eyed Sceva), see Model Engine.
File:Old Cox Babe Bee engine dissasembled.JPGAn old Cox Babe Bee 0.049 cubic inch (0.8 cubic cm.) reed valve engine disassembled. The weight is two and a quarter ounces with the propeller and large fuel tank, but without fuel.File:Cox reed valve assembled.JPGThe same Cox Babe Bee 0.049 assembled. The left rotating propeller and horizontal cylinder contribute to keeping the control lines tight.In radio-controlled modeling, a model engine is an internal combustion engine used to power a radio-controlled aircraft, radio-controlled car, radio-controlled boat, free flight and control line aircraft, and tether car models also use these engines. Because of the square-cube law, the behaviour of many machines does not always scale up or down at the same rate as the machine's size (and often not even in a linear way), usually at best causing a dramatic loss of power or efficiency, and at worst causing them not to work at all. Methanol and nitromethane are proven solutions to enhance the power of an automobile engine (Top Fuel) and they can even get these small engines running.
Contents
Overview[link]
The fully functional, albeit small, engines vary from the most common single-cylinder two-stroke to the exotic single and multiple-cylinder four-stroke, the latter taking shape in boxer, v-twin, inline and radial form, a few Wankel engine designs are also used. Most model engines run on a blend of methanol, nitromethane, and lubricant (either castor or synthetic oil). Two-stroke model engines, most often designed since 1970 with Schnuerle porting for best performance, range in typical size from .12 cubic inches (2 cubic centimeters) to 1.2 ci (19.6 cc) and generate between .5 horsepower (370 watts) to 5 hp (3.7 kW), can get as small as .010 ci (.16 cc) and as large as 3-4 ci (49–66 cc). Four-stroke model engines have been made in sizes as small as 0.20 in3 (3.3 cc) for the smallest single-cylinder models, all the way up to 3.05 in3 (50 cc) for the largest size for single-cylinder units, with twin- and multi-cylinder engines on the market being as small as 10 cc for opposed-cylinder twins, while going somewhat larger in size than 50 cc, and even upwards to well above 200 cc for some model radial engines. While the methanol and nitromethane blended "glow fuel" engines are the most common, many larger (especially above 15 cc/0.90 ci displacement) model engines, both two-stroke and a growing number of four-stroke examples are spark ignition, and are primarily fueled with gasoline. This article concerns itself with the methanol engines; gasoline-powered model engines are similar to those built for use in string trimmers, chainsaws, and other yard equipment, unless they happen to be purpose-built for aeromodeling use, being especially true for four-stroke gasoline-fueled model engines.
The majority of model engines have used, and continue to use, the two-stroke cycle principle to avoid needing valves in the combustion chamber, but a growing number of model engines use the four-stroke cycle design instead. Both reed valve and rotary valve-type two-strokes are common, with four-stroke model engines using either conventional poppet valve, and rotary valve formats for induction and exhaust.
The engine shown to the right has its carburetor in the center of the zinc alloy casting to the left. (It uses a flow restriction, like the choke on an old car engine, because the venturi effect is not effective on such a small scale.) The valve reed, cross shaped above its retainer spring, is still beryllium copper alloy, in this old engine. The glow plug is built into the cylinder head. Large production volume makes it possible to use a machined cylinder and an extruded crank case (cut away by hand in the example shown). These Cox Bee reed valve engines are notable for their low cost and ability to survive crashes. The components of the engine shown come from several different engines.
Glowplug engines[link]
For more details on this topic, see Glow fuel.Glow plugs are used for starting as well as continuing the power cycle. The glow plug consists of a durable, mostly platinum, helically wound wire filament, within a cylindrical pocket in the plug body, exposed to the combustion chamber. A small direct current voltage (around 1.5 volts) is applied to the glow plug, the engine is then started, and the voltage is removed. The burning of the fuel/air mixture in a glow-plug model engine, which requires methanol for the glow plug to work in the first place, and sometimes with the use of nitromethane for greater power output and steadier idle, occurs due to the catalytic reaction of the methanol vapor to the presence of the platinum in the filament, thus causing the ignition. This keeps the plug's filament glowing hot, and allows it to ignite the next charge. Since the ignition timing is not controlled electrically, as in a spark ignition engine or by fuel injection, as in an ordinary diesel, it must be adjusted by the richness of the mixture, the ratio of nitromethane to methanol, the compression ratio, the cooling of the cylinder head, the type of glow plug, etc. A richer mixture will tend to cool the filament and so retard ignition, slowing the engine, and a rich mixture also eases starting. After starting the engine can easily be leaned (by adjusting a needle valve in the spraybar) to obtain maximum power. Glowplug engines are also known as nitro engines. Nitro engines require a 1.5 volt ignitor to light the glow plug in the heat sink. Once primed, pulling the starter with the ignitor in will start the engine.
Diesel engines[link]
For more details on this topic, see Carbureted compression ignition model engines.Diesel engines are an alternative to methanol glow plug engines. These "diesels" run on a mixture of kerosene, ether, castor oil or vegetable oil, and Amsoil cetane or amyl nitrate booster. Despite their name, their use of compression ignition, and the use of a kerosene fuel that is similar to diesel, model diesels share very little with full-size diesel engines.
Full-size diesel engines, such as those found in a truck, are fuel injected and either two-stroke or four-stroke. They use compression ignition to ignite the mixture: the compression within the cylinder heats the inlet charge sufficiently to cause ignition, without requiring an applied ignition source. A fundamental feature of such engines, unlike petrol (gasoline) engines, is that they draw in air alone and the fuel is only mixed by being injected into the combustion chamber separately. Model diesel engines are instead a carbureted two-stroke using the crankcase for compression. Their carburettor supplies a mixture of fuel and air into the engine, with the proportions kept fairly constant and their total volume throttled to control the engine power. Apart from sharing the diesel's use of compression ignition, their construction has more in common with a small two-stroke motorcycle or lawnmower engine. In addition to this, model diesels have variable compression ratios. This variable compression is achieved by a "contra-piston," at the top of the cylinder, which can be adjusted by a screwed "T-bar". The swept volume of the engine remains the same, but as the volume of the combustion chamber at top dead centre is changed by adjusting the contra-piston, the compression ratio (swept volume + combustion chamber / combustion chamber) changes accordingly.
Model diesels are found to produce more torque than glow engines of the same displacement, and are thought to get better fuel efficiency, because the same power is produced at a lower RPM, and in a smaller displacement engine. However, the specific power may not be significantly superior to a glow engine, due to overbuilding, to assure that the engine can withstand the much higher compression, sometimes reaching ratios of as high as 30:1. Diesels also run significantly quieter, due to the more rapid combustion, unlike two-stroke glow engines, in which combustion may still be occurring when the exhaust ports are uncovered, causing a significant amount of noise.
See also[link]
Makers[link]
External links[link]
http://wn.com/Model_engine
Related pages:
http://ru.wn.com/Модельный двигатель
This page contains text from Wikipedia, the Free Encyclopedia - http://en.wikipedia.org/wiki/Model_engine
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Episode 2: Container Ships
