This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (June 2011)

Two Lovers - example of sand-shading and shellac-inking

An example Marquetry as fine art by Allashka.

Achieving Realism in Marquetry.

Mezuzah case marquetry by Yair Emanuel.

Marquetry (also spelled as marqueterie) is the art and craft of applying pieces of veneer to a structure to form decorative patterns, designs or pictures. The technique may be applied to case furniture or even seat furniture, to decorative small objects with smooth, veneerable surfaces or to freestanding pictorial panels appreciated in their own right. Parquetry is very similar in technique to marquetry: in the latter the pieces of veneer are of simple repeating geometric shapes, forming tiling patterns such as would cover a floor (parquet), or forming basketweave or brickwork patterns, trelliswork and the like.

Marquetry (and parquetry too) differs from the more ancient craft of inlay, in which a solid body of one material is cut out to receive sections of another to form the surface pattern. The word derives from a Middle French word meaning "inlaid work".

Materials[link]

The veneers used are primarily woods, but may include bone, ivory, turtle-shell (conventionally called "tortoiseshell"), mother-of-pearl, pewter, brass or fine metals. Marquetry using colored straw was a specialty of some European spa resorts from the end of the 18th century. Many exotic woods as well as common European varieties can be employed, from the near-white of boxwood^[1] to the near-black of ebony, with veneers that retain stains well, like sycamore, dyed to provide colors not found in nature.

The simplest kind of marquetry uses only two sheets of veneer, which are temporarily glued together and cut with a fine saw, producing two contrasting panels of identical design, (in French called partie and contre-partie, "part" and "counterpart").

Marquetry as a modern craft most commonly uses knife-cut veneers. However, the knife-cutting technique usually requires a lot of time. For that reason, many marquetarians have switched to fret or scroll saw techniques. Other requirements are a pattern of some kind, some brown gummed tape (IE as the moistened glue dries it causes the tape to shrink and so the veneer pieces are pulled closer together), PVA glue and a base-board with balancing veneers on the alternate face to compensate stresses. Finishing the piece will require fine abrasive paper always backed by a sanding block. Either ordinary varnish, special varnishes, modern polyurethane -oil or water based- good waxes and even the technique of french polish are different methods used to seal and finish the piece.

Sand shading is a process used to make a picture appear to be more three-dimensional. A piece of veneer to be incorporated into a picture is partially submerged into hot sand for a few seconds.

Another process is engraving fine lines into a picture and filling them with a mixture of India Ink and Shellac.

History[link]

The technique of veneered marquetry had its inspiration in 16th century Florence (and at Naples). Marquetry elaborated upon Florentine techniques of inlaying solid marble slabs with designs formed of fitted marbles, jaspers and semi-precious stones. This work, called opere di commessi, has medieval parallels in Central Italian "Cosmati"-work of inlaid marble floors, altars and columns. The technique is known in English as pietra dura, for the "hardstones" used: onyx, jasper, cornelian, lapis lazuli and colored marbles. In Florence, the Chapel of the Medici at San Lorenzo is completely covered in a colored marble facing using this demanding jig-sawn technique.

Techniques of wood marquetry were developed in Antwerp and other Flemish centers of luxury cabinet-making during the early 16th century. The craft was imported full-blown to France after the mid-seventeenth century, to create furniture of unprecedented luxury being made at the royal manufactory of the Gobelins, charged with providing furnishings to decorate Versailles and the other royal residences of Louis XIV. Early masters of French marquetry were the Fleming Pierre Golle and his son-in-law, André-Charles Boulle, who founded a dynasty of royal and Parisian cabinet-makers (ébénistes) and gave his name to a technique of marquetry employing tortoiseshell and brass with pewter in arabesque or intricately foliate designs. Boulle marquetry dropped out of favor in the 1720s, but was revived in the 1780s. In the decades between, carefully matched quarter-sawn veneers sawn from the same piece of timber were arranged symmetrically on case pieces and contrasted with gilt-bronze mounts. Floral marquetry came into favor in Parisian furniture in the 1750s, employed by cabinet-makers like Bernard van Risenbergh, Jean-Pierre Latz and Simon-François Oeben. The most famous royal French furniture veneered with marquetry are the pieces delivered by Jean Henri Riesener in the 1770s and 1780s. The Bureau du Roi was the most famous amongst these famous masterpieces.

Modern marquetry cabinet made from Tasmanian timbers

Marquetry was not ordinarily a feature of furniture made outside large urban centers. Nevertheless, marquetry was introduced into London furniture at the Restoration of Charles II in 1660, the product of immigrant Dutch 'inlayers', whose craft traditions owed a lot to Antwerp. Panels of elaborately scrolling "seaweed" marquetry of box or holly contrasting with walnut appeared on table tops, cabinets, and long-case clocks. At the end of the 17th century, a new influx of French Huguenot craftsmen went to London, but marquetry in England had little appeal in the anti-French, more Chinese-inspired high-style English furniture (mis-called 'Queen Anne') after ca 1720. Marquetry was revived as a vehicle of Neoclassicism and a 'French taste' in London furniture, starting in the late 1760s. Cabinet-makers associated with London-made marquetry furniture, 1765–1790, include Thomas Chippendale and less familiar names, like John Linnell, the French craftsman Pierre Langlois, and the firm of William Ince and John Mayhew.

Although marquetry is a technique separate from inlay, English marquetry-makers were called "inlayers" throughout the 18th century. In Paris, before 1789, makers of veneered or marquetry furniture (ébénistes) belonged to a separate guild from chair-makers and other furniture craftsmen working in solid wood (menuisiers).

Tiling patterning has been more highly developed in the Islamic world than anywhere else, and many extraordinary examples of inlay work have come from Middle Eastern countries such as Lebanon and Iran.

At Tonbridge and Royal Tunbridge Wells, England, souvenir "Tunbridge wares"— small boxes and the like— made from the mid-18th century onwards, were veneered with panels of minute wood mosaics, usually geometric, but which could include complicated subjects like landscapes. They were made by laboriously assembling and gluing thin strips and shaped rods, which then could be sliced crossways to provide numerous mosaic panels all of the same design.

Marquetry was a feature of some centers of German cabinet-making from ca 1710. The craft and artistry of David Roentgen, Neuwied, (and later at Paris as well) was unsurpassed, even in Paris, by any 18th Century marquetry craftsman.

Marquetry was not a mainstream fashion in 18th-century Italy, but the neoclassical marquetry of Giuseppe Maggiolini, made in Milan at the end of the century is notable.

The classic illustrated description of 18th century marquetry-making was contributed by Roubo to the Encyclopédie des Arts et Métiers, 1770. The most thorough and dependable 20th century accounts of marquetry, in the context of Parisian cabinet-making, are by Pierre Verlet.

New techniques[link]

During the 80's Georges Vriz developed a new technique called piercing. The idea is to layer two veneer layers on top of each other and sand through the top one, to the point of fiber transparency. This technique has been used mainly in France, by professionals and students of the Ecole Boulle. In the US the technique has been used at the American School of French Marquetry by one of the teacher, the artist Patrice Lejeune. The school staff is also proposing a new name for this technique : "Given that 'piercing' is an unfortunate mistake in the veneering world, we chose to use the word "Fusion" instead, by which term the artist expresses his intention of sanding through the veneer as a decorative, textural effect, not as a mistake." At the American School of French Marquetry, Patrice Lejeune uses a technique he calls "sprinkling": by using waste - sawdust, shavings, scrapings etc. - as pigments, to create a range of diverse effects. Arguably this is no longer marquetry in the pure sense of the term, since it spills over into textured painting, even collage (to a limited extent) but, as a byproduct of modern marquetry making, we decided to include it in this thread. This technique also, was invented by Georges Vriz, who employed it on a series of large panels exhibited in Paris at the Ecole de la Bonne Graine in 1996.

It is possible to achieve realism without the use of the special techniques mentioned above: the Bald Eagle, to the right, is an example of how realism is achieved with natural wood veneers in their natural colors and textures.

Amongst new techniques applied to marquetry we may include laser cutting, where the design is drawn or imported as a CAD file and each pieces is cut separately; each different species of wood -and thickness- may need a specific adjustment of the beam's power; the offset will determine the gap between the pieces and, in some cases, the beam will leave a dark edge due to the very high heat required by the process.

See also[link]

• Parquetry
• Woodworking
• Lath Art
• Khatam
• List of furniture designers
• Turnbridge ware
• Hardwood

References[link]

1. ^ Boxwood turns golden-tan as it ages.

External links[link]

• Examples of Realism in Marquetry
• [1]
• Contemporary Wall Art Marquetry - New technics. A unique painting and the revival of the best European traditions.
• Patrice Lejeune - Contemporary Marquetry Art - New technics
• Examples of contemporary marquetry
• LathArt How to and Patterns LathArt is similar to Marquetry, but more rustic
• A Short History of Marquetry Includes a glossary.
• A feature on how to create Marquetry

v t e Decorative arts, handicrafts, arts and crafts Textile Banner-making Canvas work Cross-stitch Crocheting Curve stitching Embroidery Felting Friendship bracelet Knitting Lace-making Lucet Macrame Millinery Needlepoint Needlework Patchwork Quilting Ribbon embroidery Rug hooking Rug making Sewing Shoemaking Spinning (textiles) String art Tapestry Tatting Tie-dye Weaving Paper Bookbinding Calligraphy Cardmaking Card Modelling Collage Decoupage Embossing Iris folding Marbling Origami Kirigami Paper toys Papercraft Papier-mâché Scrapbooking Stamping Wallpaper Wood Cabinet making Carpentry Chip carving Ébéniste Fretwork Intarsia Marquetry Wood burning Wood carving Woodturning Ceramic Azulejo Bone china Cameo glass Earthenware Glassware Porcelain Pottery Stained glass Stoneware Terracotta Metal Jewellery Silversmithing Other Assemblage Beadwork Bone carving Doll making Dollhouse Egg decorating Engraved gems Hardstone carving Lathart Lapidary Leatherworking Miniatures Micromosaic Mosaic Pietra dura Pressed flower craft Scrimshaw Straw marquetry, Wall decals

Silas Kopf is a furniture maker specializing in the art of marquetry. Born in 1949, Kopf graduated from Princeton University in 1972 with a degree in architecture and soon began designing and making furniture. In 1988, he received a Craftsman's Fellowship from the National Endowment for the Arts,^[1] and used the opportunity to study traditional marquetry technique at the École Boulle, an institute of interior architecture and design, in Paris. His major projects include several pianos commissioned by Steinway & Sons^[2] and benches, desks, and cabinets for private collections and museums. His designs frequently incorporate floral depictions, other images from nature, and trompe l'oeil concepts. He first became interested in marquetry because he hoped for an alternative, less consumerist lifestyle.^[3]

Since 1978, he has worked in Easthampton, Massachusetts, where he continues to build and design. He has an assistant, Tom Coughlin, who also designs and builds guitars.

References[link]

Arthur "Art" Wood (7 July 1937 - 3 November 2006) was a British blues, pop and rock singer, who led The Artwoods in the 1960s and subsequently became a graphic artist. He was the brother of Ronnie Wood of The Rolling Stones.

Life[link]

Born in 1937, in West Drayton, Middlesex, he enrolled at Ealing School of Art in 1950. There he developed his musical interests, as well as taking a keen interest in graphic design and fine art. In 1955 he started two years of National Service; he was posted in Devizes, Wiltshire, where he formed a skiffle group. In 1958, after he had returned to London, he formed his own R&B group, the Art Wood Combo, playing versions of songs by Chuck Berry, Fats Domino and others.

By 1962, he was one of several singers regularly featured with Alexis Korner's Blues Incorporated, which also included Charlie Watts and Cyril Davies. However, as that group firmed up its line-up with Long John Baldry as the main lead singer, Art Wood re-formed his own group, which he now called The Artwoods. The group included organist Jon Lord (who would go on to join Deep Purple) and drummer Keef Hartley.

See main article : The Artwoods

The Artwoods failed to make a major commercial breakthrough, and split up in 1967. In 1969 Wood formed the short-lived group Quiet Melon, with his brother Ronnie, Rod Stewart, Ronnie Lane, Kenny Jones, Ian McLagan and Kim Gardner.^[1][2] They recorded four songs and delivered the tapes to Fontana Records, who turned them down and cancelled Wood's contract. He then semi-retired from the music business; Gardner went on to another band; and the other members of the group carried on to become The Faces.

Wood joined his other brother Ted in setting up a graphic design business and continued to perform on a semi-professional basis with the Downliners Sect and reunited versions of the Artwoods, with occasional guest appearances by his brother Ronnie.

Art Wood died in London from prostate cancer, aged 69.^[2]

References[link]