A wall constructed with bricks of various shades and lengths

A pallet of bricks stacked without mortar

An old brick wall in English bond laid with alternating courses of headers and stretchers

Bricked Front Street along the Cane River in historic Natchitoches, Louisiana

A brick is a block, or a single unit of a ceramic material used in masonry construction, usually stacked together, or laid using various kinds of mortar to hold the bricks together and make a permanent structure.^[1] Bricks are typically produced in common or standard sizes in bulk quantities. They have been regarded as one of the longest lasting and strongest building materials used throughout history.

History[link]

The Roman Basilica Aula Palatina in Trier, Germany, built in the 4th century with fired bricks as audience hall for Constantine I

The oldest discovered bricks, originally made from shaped mud and dating to before 7500 B.C. were found at Tell Aswad, and then later in the upper Tigris region and in southeast Anatolia close to Diyarbakir.^[2] Other more recent findings, dated between 7,000 and 6,395 B.C., come from Jericho and Catal Hüyük. In the ancient Indus Valley city of Mehrgarh, mud bricks have been found dating to 7000 BCE. (Kenoyer 2005) Ceramic bricks were used as early as 4500 BCE in early Indus Valley cities.

The first sun-dried bricks were made in Mesopotamia (what is now Iraq), in the ancient city of Ur in about 4000 BC, although the arch used for drying the bricks was not actually found.^[3]

Other examples of civilizations who used mud brick include the ancient Egyptians^[3] and the Indus Valley Civilization, where it was used exclusively. In particular, it is evident from the ruins of Buhen, Mohenjo-daro and Harappa.

The world's highest brick tower of St. Martin's Church in Landshut, Germany, completed in 1500

Malbork Castle, former Ordensburg of the Teutonic Order - biggest brick castle in the world

The Romans made use of fired bricks, and the Roman legions, which operated mobile kilns^{[citation needed]}, introduced bricks to many parts of the empire. Roman bricks are often stamped with the mark of the legion that supervised their production. The use of bricks in southern and western Germany, for example, can be traced back to traditions already described by the Roman architect Vitruvius.

Europe[link]

The oldest domestic bricks were found in Greece. In the 12th century, bricks from Northern-Western Italy were re-introduced to Northern Germany, where an independent tradition evolved. It culminated in the so-called brick Gothic, a reduced style of Gothic architecture that flourished in Northern Europe, especially in the regions around the Baltic Sea which are without natural rock resources. Brick Gothic buildings, which are built almost exclusively of bricks, are to be found in Denmark, Germany, Poland, and Russia.

During the Renaissance and the Baroque, visible brick walls were unpopular and the brickwork was often covered with plaster. It was only during the mid-18th century that visible brick walls regained some degree of popularity, as illustrated by the Dutch Quarter of Potsdam, for example.

Chile house in Hamburg, Germany

The transport in bulk of building materials such as bricks over long distances was rare before the age of canals, railways, roads and heavy goods vehicles. Before this time bricks were generally made close to their point of intended use. It has been estimated^{[by whom?]} that in England in the 18th century carrying bricks by horse and cart for ten miles (16 km) over the poor roads then existing could more than double their price.^{[citation needed]}

Bricks were often used for reasons of speed and economy, even in areas where stone was available. The buildings of the Industrial Revolution in Britain were largely constructed of brick and timber due to the demand created. During the building boom of the 19th century in the eastern seaboard cities of Boston and New York City, for example, locally made bricks were often used in construction in preference to the brownstones of New Jersey and Connecticut for these reasons.

The trend of building upwards for offices that emerged towards the beginning of the 19th century displaced brick in favor of cast and wrought iron and later steel and concrete. Some early 'skyscrapers' were made in masonry, and demonstrated the limitations of the material – for example, the Monadnock Building in Chicago (opened in 1896) is masonry and just 17 stories high; the ground walls are almost 6 feet (1.8 m) thick, clearly building any higher would lead to excessive loss of internal floor space on the lower floors. Brick was revived for high structures in the 1950s following work by the Swiss Federal Institute of Technology^{[disambiguation needed ]} and the Building Research Establishment in Watford, UK. This method produced 18-story structures with bearing walls no thicker than a single brick (150–225 mm). This potential has not been fully developed because of the ease and speed in building with other materials; in the late-20th century brick was confined to low- or medium-rise structures or as a thin decorative cladding over concrete-and-steel buildings or for internal non-load-bearing walls.

In Victorian London the bright red brick was chosen to make buildings visible in the heavy fog that caused transport problems.^[4]

China[link]

In pre-modern China, brick-making was the job of a lowly and unskilled artisan, but a kiln master was respected as a step above the former.^[5] Early traces of bricks were found in a ruin site in Xi'an in 2009 dated back about 3800 years ago. Before this discovery, it is widely believed that bricks appeared about 3000 years ago in the Western Zhou dynasty since the earliest bricks were found in Western Zhou ruins.^[6][7][8] These bricks are the earliest bricks discovered that were made by a fired process.^[9] Early descriptions of the production process and glazing techniques used for bricks can be found in the Song Dynasty carpenter's manual Yingzao Fashi, published in 1103 by the government official Li Jie, who was put in charge of overseeing public works for the central government's construction agency. The historian Timothy Brook writes of the production process in Ming Dynasty China (aided with visual illustrations from the Tiangong Kaiwu encyclopedic text published in 1637):

The brickwork of Shebeli Tower in Iran displays 12th century craftsmanship

...the kilnmaster had to make sure that the temperature inside the kiln stayed at a level that caused the clay to shimmer with the colour of molten gold or silver. He also had to know when to quench the kiln with water so as to produce the surface glaze. To anonymous laborers fell the less skilled stages of brick production: mixing clay and water, driving oxen over the mixture to trample it into a thick paste, scooping the paste into standardized wooden frames (to produce a brick roughly 42 cm long, 20 cm wide, and 10 cm thick), smoothing the surfaces with a wire-strung bow, removing them from the frames, printing the fronts and backs with stamps that indicated where the bricks came from and who made them, loading the kilns with fuel (likelier wood than coal), stacking the bricks in the kiln, removing them to cool while the kilns were still hot, and bundling them into pallets for transportation. It was hot, filthy work.^[10]

The idea of signing the worker's name and birth date on the brick and the place where it was made was not new to the Ming era and had little or nothing to do with vanity.^[11] As far back as the Qin Dynasty (221 BC–206 BC), the government required blacksmiths and weapon-makers to engrave their names onto weapons in order to trace the weapons back to them, lest their weapons should prove to be of a lower quality than the standard required by the government.^[12]

Methods of manufacture[link]

Brick making at the beginning of the 20th century.

"Bricks" for building may be made from clay, shale, soft slate, calcium silicate, concrete, or shaped from quarried stone. However, true bricks are ceramic, and therefore created by the action of heat and cooling.

Clay is the most common material, with modern clay bricks formed in one of three processes - soft mud, dry press, or extruded.

Normally, brick contains the following ingredients^[13]:

1. Silica (sand) - 50% to 60% by weight
2. Alumina (clay) - 20% to 30% by weight
3. Lime - 2 to 5% by weight
4. Iron oxide - 5 to 6% (not greater than 7%) by weight
5. Magnesia - less than 1% by weight

Mud bricks[link]

The soft mud method is the most common, as it is the most economical. It starts with the raw clay, preferably in a mix with 25-30% sand to reduce shrinkage. The clay is first ground and mixed with water to the desired consistency. The clay is then pressed into steel moulds with a hydraulic press. The shaped clay is then fired ("burned") at 900-1000 °C to achieve strength.

Rail kilns[link]

Xhosa brickmaker at kiln near Ngcobo in the former Transkei in 2007.

A traditional brick factory in Iran.

In modern brickworks, this is usually done in a continuously fired tunnel kiln, in which the bricks move slowly through the kiln on conveyors, rails, or kiln cars to achieve consistency for all bricks. The bricks often have added lime, ash, and organic matter to speed the burning.

Bull's Trench Kilns[link]

In India, brick making is typically a manual process. The most common type of brick kiln in use there are Bull's Trench Kiln (BTK), based on a design developed by British engineer W. Bull in the late 19th century.

An oval or circular trench, 6–9 meters wide, 2-2.5 meters deep, and 100–150 meters in circumference, is dug. A tall exhaust chimney is constructed in the centre. Half or more of the trench is filled with "green" (unfired) bricks which are stacked in an open lattice pattern to allow airflow. The lattice is capped with a roofing layer of finished brick.

In operation, new green bricks, along with roofing bricks, are stacked at one end of the brick pile; cooled finished bricks are removed from the other end for transport. In the middle the brick workers create a firing zone by dropping fuel (coal, wood, oil, debris, and so on.) through access holes in the roof above the trench.

West face of Roskilde Cathedral in Roskilde, Denmark.

The advantage of the BTK design is a much greater energy efficiency compared with clamp or scove kilns. Sheet metal or boards are used to route the airflow through the brick lattice so that fresh air flows first through the recently burned bricks, heating the air, then through the active burning zone. The air continues through the green brick zone (pre-heating and drying them), and finally out the chimney where the rising gases create suction which pulls air through the system. The reuse of heated air yields savings in fuel cost.

As with the rail process above, the BTK process is continuous. A half dozen laborers working around the clock can fire approximately 15,000-25,000 bricks a day. Unlike the rail process, in the BTK process the bricks do not move. Instead, the locations at which the bricks are loaded, fired, and unloaded gradually rotate through the trench.^[14]

Dry pressed bricks[link]

The dry press method is similar to mud brick but starts with a much thicker clay mix, so it forms more accurate, sharper-edged bricks. The greater force in pressing and the longer burn make this method more expensive.

Extruded bricks[link]

For extruded bricks the clay is mixed with 10-15% water (stiff extrusion) or 20-25% water (soft extrusion). This is forced through a die to create a long cable of material of the proper width and depth. This is then cut into bricks of the desired length by a wall of wires. Most structural bricks are made by this method, as it produces hard, dense bricks, and suitable dies can produce holes or other perforations. The introduction of holes reduces the volume of clay needed, and hence the cost. Hollow bricks are lighter and easier to handle, and have thermal properties different from solid bricks. The cut bricks are hardened by drying for 20 to 40 hours at 50 to 150 °C before being fired. The heat for drying is often waste heat from the kiln. European-style extruded bricks or blocks are used in single-wall construction with finishes applied inside and outside. Their many voids are a greater proportion of the volume than the solid, thin walls of fired clay. Such bricks are made in 15, 25, 30, 42 and 50-cm widths. Some models have very high thermal insulation performance suitable for zero-energy buildings.

Calcium silicate bricks[link]

The raw materials for calcium silicate bricks include lime mixed with quartz, crushed flint or crushed siliceous rock together with mineral colourants. The materials are mixed and left until the lime is completely hydrated; the mixture is then pressed into moulds and cured in an autoclave for two or three hours to speed the chemical hardening. The finished bricks are very accurate and uniform, although the sharp arrises need careful handling to avoid damage to brick (and bricklayer). The bricks can be made in a variety of colours, white is common but pastel shades can be achieved.

Csk bricks are common in Sweden, especially in houses built or renovated in the 1970s,, and are known as "Mexitegel" (en: Mexi[can] Bricks).

In India these are known as Fly ash bricks, manufactured using the FaL-G (fly ash, lime and gypsum) process.

Calcium silicate bricks are also manufactured in Canada and the United States, and meet the criteria set forth in ASTM C73 - 10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick). It has lower embodied energy than cement based man-made stone and clay brick^{[citation needed]}.

Concrete bricks[link]

A concrete brick-making assembly line in Guilinyang Town, Hainan, China. This operation produces a pallet containing 42 bricks, approximately every 30 seconds.

Bricks of concrete with sand aggregate can be made using a simple machine, and a basic assembly line method. A conveyor belt adds the mixture to a machine, which pours a measured amount of concrete into a form. The form is vibrated to remove bubbles. The form is then raised to reveal the wet bricks, spaced out on a plywood sheet. A small elevator then stacks these palettes, after which a forklift operator moves them to the brickyard for drying.

Influence on fired colour[link]

Yellow London Stocks at Waterloo

The fired colour of clay bricks is influenced by the chemical and mineral content of raw materials, the firing temperature and the atmosphere in the kiln. For example pink coloured bricks are the result of a high iron content, white or yellow bricks have a higher lime content. Most bricks burn to various red hues, if the temperature is increased the colour moves through dark red, purple and then to brown or grey at around 1,300 °C (2,372 °F). Calcium silicate bricks have a wider range of shades and colours, depending on the colourants used. The names of bricks may reflect their origin and colour, such as London stock brick and Cambridgeshire White.

"Bricks" formed from concrete are usually termed blocks, and are typically pale grey in colour. They are made from a dry, small aggregate concrete which is formed in steel moulds by vibration and compaction in either an "egglayer" or static machine. The finished blocks are cured rather than fired using low-pressure steam. Concrete blocks are manufactured in a much wider range of shapes and sizes than clay bricks and are also available with a wider range of face treatments - a number of which are to simulate the appearance of clay bricks.

An impervious and ornamental surface may be laid on brick either by salt glazing, in which salt is added during the burning process, or by the use of a "slip," which is a glaze material into which the bricks are dipped. Subsequent reheating in the kiln fuses the slip into a glazed surface integral with the brick base.

Natural stone bricks are of limited modern utility, due to their enormous comparative mass, the consequent foundation needs, and the time-consuming and skilled labour needed in their construction and laying. They are very durable and considered more handsome than clay bricks by some. Only a few stones are suitable for bricks. Common materials are granite, limestone and sandstone. Other stones may be used (for example, marble, slate, quartzite, and so on.) but these tend to be limited to a particular locality.

Optimal dimensions, characteristics, and strength[link]

Loose bricks

For efficient handling and laying bricks must be small enough and light enough to be picked up by the bricklayer using one hand (leaving the other hand free for the trowel). Bricks are usually laid flat and as a result the effective limit on the width of a brick is set by the distance which can conveniently be spanned between the thumb and fingers of one hand, normally about four inches (about 101 mm). In most cases, the length of a brick is about twice its width, about eight inches (about 203 mm) or slightly more. This allows bricks to be laid bonded in a structure to increase its stability and strength (for an example of this, see the illustration of bricks laid in English bond, at the head of this article). The wall is built using alternating courses of stretchers, bricks laid longways and headers, bricks laid crossways. The headers tie the wall together over its width. In fact, this wall is built in a variation of English bond called English cross bond where the successive layers of stretchers are displaced horizontally from each other by half a brick length. In true English bond the perpendicular lines of the stretcher courses are in line with each other.

A bigger brick makes for a thicker (and thus more insulating) wall. Historically, this meant that bigger bricks were necessary in colder climates (see for instance the slightly larger size of the Russian brick in table below), while a smaller brick was adequate, and more economical, in warmer regions. A notable illustration of this correlation is the Green Gate in Gdansk; built in 1571 of imported Dutch brick, too small for the colder climate of Gdansk, it was notorious for being a chilly and drafty residence. Nowadays this is no longer an issue, as modern walls typically incorporate specialized insulation materials.

The correct brick for a job can be picked from a choice of colour, surface texture, density, weight, absorption and pore structure, thermal characteristics, thermal and moisture movement, and fire resistance.

Face brick ("house brick") sizes,^[15] (alphabetical order)

Standard	Imperial	Metric
Australia	9 × 4⅓ × 3 in	230 × 110 × 76 mm
Denmark	9 × 4¼ × 2¼ in	228 × 108 × 54 mm
Germany	9 × 4¼ × 2¾ in	240 × 115 × 71 mm
India	9 × 4¼ × 2¾ in	228 × 107 × 69 mm
Romania	9 × 4¼ × 2½ in	240 × 115 × 63 mm
Russia	10 × 4¾ × 2½ in	250 × 120 × 65 mm
South Africa	8¾ × 4 × 3 in	222 × 106 × 73 mm
Sweden	10 × 4¾ × 2½ in	250 × 120 × 62 mm
United Kingdom	8½ × 4 × 2½ in	215 × 102.5 × 65 mm
United States	8 × 4 × 2¼ in	203 × 102 × 57 mm

In England, the length and the width of the common brick has remained fairly constant over the centuries (but see brick tax), but the depth has varied from about two inches (about 51 mm) or smaller in earlier times to about two and a half inches (about 64 mm) more recently. In the United Kingdom, the usual size of a modern brick is 215 × 102.5 × 65 mm (about 8 ⁵⁄₈ × 4 ¹⁄₈ × 2 ⁵⁄₈ inches), which, with a nominal 10 mm (³⁄₈ inch) mortar joint, forms a unit size of 225 × 112.5 × 75 mm (9 × 4 ¹⁄₂ × 3 inches), for a ratio of 6:3:2. In the United States, modern bricks are usually about 8 × 4 × 2 ¹⁄₄ inches (203 × 102 × 57 mm).

Some brickmakers create innovative sizes and shapes for bricks used for plastering (and therefore not visible) where their inherent mechanical properties are more important than the visual ones.^[16] These bricks are usually slightly larger, but not as large as blocks and offer the following advantages:

• a slightly larger brick requires less mortar and handling (fewer bricks) which reduces cost
• ribbed exterior aids plastering
• more complex interior cavities allow improved insulation, while maintaining strength.

Blocks have a much greater range of sizes. Standard coordinating sizes in length and height (in mm) include 400×200, 450×150, 450×200, 450×225, 450×300, 600×150, 600×200, and 600×225; depths (work size, mm) include 60, 75, 90, 100, 115, 140, 150, 190, 200, 225, and 250. They are usable across this range as they are lighter than clay bricks. The density of solid clay bricks is around 2,000 kg/m³: this is reduced by frogging, hollow bricks, and so on.; but aerated autoclaved concrete, even as a solid brick, can have densities in the range of 450–850 kg/m³.

Bricks may also be classified as solid (less than 25% perforations by volume, although the brick may be "frogged," having indentations on one of the longer faces), perforated (containing a pattern of small holes through the brick removing no more than 25% of the volume), cellular (containing a pattern of holes removing more than 20% of the volume, but closed on one face), or hollow (containing a pattern of large holes removing more than 25% of the brick's volume). Blocks may be solid, cellular or hollow

The term "frog" for the indentation on one bed of the brick is a word that often excites curiosity as to its origin. The most likely explanation is that brickmakers also call the block that is placed in the mould to form the indentation a frog. Modern brickmakers usually use plastic frogs but in the past they were made of wood. When these are wet and have clay on them they resemble the amphibious kind of frog and this is where they got their name. Over time this term also came to refer to the indentation left by them.

Brick arch from a vault in Roman Bath - England

A brick section of the old Dixie Highway, United States

The compressive strength of bricks produced in the United States ranges from about 1000 lbf/in² to 15,000 lbf/in² (7 to 105 MPa or N/mm² ), varying according to the use to which the brick are to be put. In England clay bricks can have strengths of up to 100 MPa, although a common house brick is likely to show a range of 20–40 MPa.

Use[link]

Bricks are used for building, block paving and pavement. In the USA, brick pavement was found incapable of withstanding heavy traffic, but it is coming back into use as a method of traffic calming or as a decorative surface in pedestrian precincts. For example, in the early 1900s, most of the streets in the city of Grand Rapids, Michigan were paved with brick. Today, there are only about 20 blocks of brick paved streets remaining (totalling less than 0.5 percent of all the streets in the city limits).^[17]

Bricks in the metallurgy and glass industries are often used for lining furnaces, in particular refractory bricks such as silica, magnesia, chamotte and neutral (chromomagnesite) refractory bricks. This type of brick must have good thermal shock resistance, refractoriness under load, high melting point, and satisfactory porosity. There is a large refractory brick industry, especially in the United Kingdom, Japan, the United States, Belgium and the Netherlands.

In Northwest Europe, bricks have been used in construction for centuries. Until recently, almost all houses were built almost entirely from bricks. Although many houses are now built using a mixture of concrete blocks and other materials, many houses are skinned with a layer of bricks on the outside for aesthetic appeal.

Engineering bricks are used where strength, low water porosity or acid (flue gas) resistance are needed.

In the UK a redbrick university is one founded and built in the Victorian era, often as a technical college. The term serves to distinguish these polytechnic colleges from older, more classics-oriented universities.

Colombian architect Rogelio Salmona was noted for his extensive use of red brick in his buildings and for using natural shapes like spirals, radial geometry and curves in his designs.^[18] Most buildings in Colombia are made of brick, given the abundance of clay in equatorial countries like this one.

Limitations[link]

The San Francisco Earthquake of 1906 shows the limitations of brickwork construction.

Starting in the twentieth century, the use of brickwork declined in many areas due to earthquakes. The San Francisco earthquake of 1906 revealed the weaknesses of brick buildings in earthquake-prone areas. Most buildings in San Francisco collapsed during the earthquake, due to the cement-based mortar used to hold the bricks together. During seismic events, the mortar cracks and crumbles, and the bricks are no longer held together.

A panorama of San Francisco after the earthquake.

Gallery[link]

• 

  Virgilio Barco Public Library, Bogotá, Colombia

• 

  A brick kiln, Tamilnadu, India

• Brickwork.JPG

  Brickwork, United States.

• 

  Brick sculpturing on Thornbury Castle, Thornbury, near Bristol, England. The chimneys were erected in 1514

• 

  Frauenkirche, Munich, Germany, erected 1468-1488, looking up at the towers

• 

  Mudéjar brick church tower in Teruel, Spain, (14th c.)

• 

  Porotherm style clay block brick

• 

  Ishtar Gate of Babylon in the Pergamon Museum, Berlin, Germany

• St Michael and All Angels Church, Blantyre, Malawi Brick Detail 2.JPG

  Decorative bricks in St Michael and All Angels Church, Blantyre, Malawi

• 

  A typical brick house in the Netherlands.

• 

  A typical dutch farmhouse near Wageningen, Netherlands

• 

  FES Building, Cali, Colombia

See also[link]

• Brick tinting
• Brickwork
• Brickyard, a place where bricks may be made, stored, or distributed from
• Ceramics
• Ceramic building material
• Clinker brick
• Concrete masonry unit (cinder block)
• Fire brick
• Masonry
• Millwall brick, a street weapon in England
• Mortar, the materials that bricks are bound together with
• Mudbrick
• Roman brick
• Tile
• Wienerberger

Notes[link]

References[link]

• Aragus, Philippe (2003) (in French), Brique et architecture dans l'Espagne médiévale, Bibliothèque de la Casa de Velazquez, 2, Madrid 
• Badstübner, E; Schumann, D, eds. (since 1997) (in German), Studien zur Backsteinarchitektur, 7, Berlin 
• Brook, Timothy (1998), The Confusions of Pleasure: Commerce and Culture in Ming China, Berkeley: University of California Press, ISBN 0-520-22154-0 
• Campbell, James W.; Pryce, Will, photographer (2003), Brick: a World History,, London & New York: Thames & Hudson 
• Coomands, Thomas; VanRoyen, Harry, eds. (2008), "Novii Monasterii, 7", Medieval Brick Architecture in Flanders and Northern Europe, Koksijde: Ten Duinen 
• Cramer, J.; Sack, D., eds. (since 2004) (in German), Berliner Beiträge zur Bauforschung und Denkmalpflege, 5, Petersberg 
• Das, Saikia Mimi; Das, Bhargab Mohan; Das, Madan Mohan (2010), Elements of Civil Engineering, New Delhi: PHI Learning Private Limited, ISBN 978-81-203-4097-8 
• Kornmann, M. (2007), Clay Bricks and Roof Tiles, Manufacturing and Properties, Paris: Lasim, ISBN 2-9517765-6-X 
• Plumbridge, Andrew; Meulenkamp, Wim (2000), Brickwork. Architecture and Design, London: Seven Dials, ISBN 1-84188-039-6 

Further reading[link]

• Dobson, E. A. (1850) (2 pt.), Rudimentary Treatise on the Manufacture of Bricks and Tiles, London: John Weale 
• Hudson, Kenneth (1972) Building Materials; chap. 3: Bricks and tiles. London: Longman; pp. 28–42
• Lloyd, N. (1925) History of English Brickwork. London: H. Greville Montgomery 

Dewan, Kader 2010

External links[link]

Look up brick in Wiktionary, the free dictionary.

Wikimedia Commons has media related to: Bricks

Wikisource has the text of the 1911 Encyclopædia Britannica article Brick.

• Brick in 20th century architecture
• Brick Industry Association
• Mason Contractors Association of America
• Masonry Institute of America
• Western States Clay Products Association
• "Bricks Made Automatically by One-Man Machine" Popular Mechanics, April 1935, pg. 523 bottom-left

For other uses of the title The Grid, see Grid (disambiguation).

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (October 2010)

The Grid are an English electronic dance group, consisting of Richard Norris and David Ball (formerly of Soft Cell),^[1] with guest contributions from other musicians. They are best known for the hits "Swamp Thing", "Crystal Clear", "Rollercoaster", "Floatation", and "Cybernetic" (with Robert Fripp and Phil Manzanera).

Band members[link]

• Richard Norris (born 23 June 1965, London) - keyboards
• David Ball (born 3 May 1959, Blackpool, Lancashire) - keyboards
• Sacha Rebecca Souter (musician) (born 26 November 1963, Cockerton, County Durham) - Vocals

Biography[link]

The Grid formed in 1988 and had their first success with debut single, "Floatation", released on East West Records in 1990. They went on to release a string of ten UK hit singles and four albums,^[1] and toured the UK, Europe, Asia and Australia. The group's 1994 album Evolver reached #14 in the UK Albums Chart.^[1] The lead single from this album, "Swamp Thing", featuring elaborate banjo lines played by Roger Dinsdale. "Swamp Thing" proved to be a commercial success in the UK, Europe and Australia, reaching #3 in the UK^[1] and Australia and selling a total of one million copies.^{[citation needed]}

In 1996, Norris and Ball agreed to a hiatus period in order pursue individual music interests. Norris formed the Droyds, which went on to remix tracks by musicians including Armand Van Helden and Siobhan Fahey, and wrote the official biography of Paul Oakenfold (published in 2007): Ball reformed Soft Cell with Marc Almond, and also wrote music scores for films.^{[citation needed]} Norris has since formed the psychedelic duo, Beyond The Wizard's Sleeve, with DJ Erol Alkan, and has released a number of solo records and remixes under the name The Time and Space Machine.

The duo reunited in 2005, initially playing two gigs under the name GDM with female singer Misty Woods, before writing and recording new material as the Grid. A single, "Put Your Hands Together", was released in 2007 and an album, Doppelgänger, followed in 2008. Both were released on the Some Bizzare label. The album featured vocals by the British musician, Chris Braide.

Discography[link]

Albums[link]

Singles[link]

References[link]

External links[link]

• Grid Central - An Unofficial Page for The Grid
• Death of Roger Dinsdale.
• The Grid on allmusic.com
• The Grid MySpace page

Rich Beem
Personal information
Full name	Richard Michael Beem
Born	(1970-08-24) August 24, 1970 (age 41) Phoenix, Arizona
Height	5 ft 8 in (1.73 m)
Weight	165 lb (75 kg; 11.8 st)
Nationality	United States
Residence	Austin, Texas
Career
College	New Mexico State University
Turned professional	1994
Current tour(s)	PGA Tour (joined 1999) European Tour
Professional wins	5
Number of wins by tour
PGA Tour	3
Other	2
Best results in Major Championships (Wins: 1)
Masters Tournament	T15: 2003
U.S. Open	T78: 2008
The Open Championship	T20: 2007
PGA Championship	Won: 2002

Richard Michael Beem (born August 24, 1970) is an American professional golfer who plays on the PGA Tour.

Beem was born in Phoenix, Arizona, grew up in El Paso, Texas, and played college golf at New Mexico State University in Las Cruces.

Beem turned professional in 1994. His early career was broken up by a spell in Seattle selling car stereos and cell phones. He later regained interest after J. P. Hayes won the 1998 Buick Classic [1].

This changed in 1999 when Beem won the Kemper Open as a rookie. His career took a further leap forward in 2002 with a victory at the The International in Castle Rock, Colorado. Two weeks later he won the PGA Championship at Hazeltine National, one of golf's four major tournaments. Beem fended off Tiger Woods to win, who birdied his last four holes, but finished one shot behind. This victory helped establish him in the top 20 of the Official World Golf Rankings.

Until this win, Beem was best known for the book Bud, Sweat and Tees: A Walk on the Wild Side of the PGA Tour by Alan Shipnuck, which profiled his rookie year on the PGA Tour and the often wild lifestyle of him and his caddy, Steve Duplantis.

At the 2007 Nissan Open at Riviera, Beem made a hole-in-one at the 14th hole on live television on Saturday to win a new red Altima coupe, which he immediately ascended, embraced, and sat atop of in triumph. The sequence was later made into a Nissan commercial. (video) Beem credited Peter Jacobsen for inspiring his reaction; Jacobsen aced the same hole in 1994 and hopped into the nearby 300ZX convertible and pretended to drive it.^[1][2][3]

Beem was sidelined in 2010 after undergoing back surgery to repair damage to his C6 and C7 vertebrae. While Beem was expected to only miss six weeks, rehabilitation issues caused the layoff to encompass the remainder of the 2010 season. Beem played the 2011 season on a medical exemption that will require him to make $658,100 in 17 events. He missed the his first six cuts of the 2011 season before making the cut at the Valero Texas Open. He finished tied for 15th. Beem made just five cuts in 21 events. As a result, he lost his tour card and is playing out of the "past champions" category in 2012. He played on the European Tour in 2012.^[4]

Beem currently resides in Austin, Texas.

Professional wins (5)[link]

PGA Tour wins (3)[link]

No.	Date	Tournament	Winning score	Margin of victory	Runner(s)-up
1	May 30, 1999	Kemper Open	–10 (66-67-71-70=274)	1 stroke	Bill Glasson, Bradley Hughes
2	Aug 4, 2002	The International	44 points (10-0-15-19=44)*	1 point	Steve Lowery
3	Aug 18, 2002	PGA Championship	–10 (72-66-72-68=278)	1 stroke	Tiger Woods

*The International used Modified Stableford scoring.

Other wins (2)[link]

• 2002 Wendy's 3-Tour Challenge (with John Daly and Jim Furyk), Hyundai Team Matches (with Peter Lonard)

Major championships[link]

Wins (1)[link]

Year	Championship	54 holes	Winning score	Margin	Runner-up
2002	PGA Championship	3 shot deficit	–10 (72-66-72-68=278)	1 stroke	Tiger Woods

Results timeline[link]

DNP = Did not play
CUT = missed the half-way cut
"T" indicates a tie for a place
WD = Withdrew
Green background for wins. Yellow background for top-10

References[link]

External links[link]

• Official website
• Rich Beem at the PGA Tour official site
• Rich Beem at the European Tour official site
• Rich Beem at the Official World Golf Ranking official site