All 128 ASCII characters, including non-printable characters (represented by their abbreviations).
The 95 ASCII graphic characters are numbered from 20_hex to 7E_hex (decimal 32 to 126). The space character is considered a non-printing graphic.^[1][2]

The American Standard Code for Information Interchange (ASCII, pronunciation: /ˈæski/ ASS-kee;^[3]) is a character-encoding scheme originally based on the English alphabet. ASCII codes represent text in computers, communications equipment, and other devices that use text. Most modern character-encoding schemes are based on ASCII, though they support many additional characters.

ASCII developed from telegraphic codes. Its first commercial use was as a seven-bit teleprinter code promoted by Bell data services. Work on the ASCII standard began on October 6, 1960, with the first meeting of the American Standards Association's (ASA) X3.2 subcommittee. The first edition of the standard was published during 1963,^[4][5] a major revision during 1967,^[6] and the most recent update during 1986.^[7] Compared to earlier telegraph codes, the proposed Bell code and ASCII were both ordered for more convenient sorting (i.e., alphabetization) of lists and added features for devices other than teleprinters.

ASCII includes definitions for 128 characters: 33 are non-printing control characters (now mostly obsolete)^[8] that affect how text and space is processed^[9] and 95 printable characters, including the space (which is considered an invisible graphic^[2][1]).

The IANA prefers the name US-ASCII^[10] to avoid ambiguity. ASCII was the most commonly used character encoding on the World Wide Web until December 2007, when it was surpassed by UTF-8.^[11][12][13]

History[link]

The US ASCII 1968 Code Chart was structured with two columns of control characters, a column with special characters, a column with numbers, and four columns of letters

The American Standard Code for Information Interchange (ASCII) was developed under the auspices of a committee of the American Standards Association, called the X3 committee, by its X3.2 (later X3L2) subcommittee, and later by that subcommittee's X3.2.4 working group. The ASA became the United States of America Standards Institute or USASI^[14] and ultimately the American National Standards Institute.

The X3.2 subcommittee designed ASCII based on earlier teleprinter encoding systems. Like other character encodings, ASCII specifies a correspondence between digital bit patterns and character symbols (i.e. graphemes and control characters). This allows digital devices to communicate with each other and to process, store, and communicate character-oriented information such as written language. Before ASCII was developed, the encodings in use included 26 alphabetic characters, 10 numerical digits, and from 11 to 25 special graphic symbols. To include all these, and control characters compatible with the Comité Consultatif International Téléphonique et Télégraphique standard, Fieldata, and early EBCDIC, more than 64 codes were required for ASCII.

The committee debated the possibility of a shift key function (like the Baudot code), which would allow more than 64 codes to be represented by six bits. In a shifted code, some character codes determine choices between options for the following character codes. It allows compact encoding, but is less reliable for data transmission; an error in transmitting the shift code typically makes a long part of the transmission unreadable. The standards committee decided against shifting, and so ASCII required at least a seven-bit code.^[15]

The committee considered an eight-bit code, since eight bits (octets) would allow two four-bit patterns to efficiently encode two digits with binary coded decimal. However, it would require all data transmission to send eight bits when seven could suffice. The committee voted to use a seven-bit code to minimize costs associated with data transmission. Since perforated tape at the time could record eight bits in one position, it also allowed for a parity bit for error checking if desired.^[16] Eight-bit machines (with octets as the native data type) that did not use parity checking typically set the eighth bit to 0.^[17]

The code itself was patterned so that most control codes were together, and all graphic codes were together, for ease of identification. The first two columns (32 positions) were reserved for control characters.^[18] The "space" character had to come before graphics to make sorting easier, so it became position 20_hex;^[19] for the same reason, many special signs commonly used as separators were placed before digits. The committee decided it was important to support upper case 64-character alphabets, and chose to pattern ASCII so it could be reduced easily to a usable 64-character set of graphic codes.^[20] Lower case letters were therefore not interleaved with upper case. To keep options available for lower case letters and other graphics, the special and numeric codes were arranged before the letters, and the letter "A" was placed in position 41_hex to match the draft of the corresponding British standard.^[21] The digits 0–9 were arranged so they correspond to values in binary prefixed with 011, making conversion with binary-coded decimal straightforward.

Many of the non-alphanumeric characters were positioned to correspond to their shifted position on typewriters. Thus #, $ and % were placed to correspond to 3, 4, and 5 in the adjacent column. The parentheses could not correspond to 9 and 0, however, because the place corresponding to 0 was taken by the space character. Since many European typewriters placed the parentheses with 8 and 9, those corresponding positions were chosen for the parentheses. The @ symbol was not used in continental Europe and the committee expected it would be replaced by an accented À in the French variation, so the @ was placed in position 40_hex next to the letter A.^[22]

The control codes felt essential for data transmission were the start of message (SOM), end of address (EOA), end of message (EOM), end of transmission (EOT), "who are you?" (WRU), "are you?" (RU), a reserved device control (DC0), synchronous idle (SYNC), and acknowledge (ACK). These were positioned to maximize the Hamming distance between their bit patterns.^[23]

With the other special characters and control codes filled in, ASCII was published as ASA X3.4-1963, leaving 28 code positions without any assigned meaning, reserved for future standardization, and one unassigned control code.^[24] There was some debate at the time whether there should be more control characters rather than the lower case alphabet.^[25] The indecision did not last long: during May 1963 the CCITT Working Party on the New Telegraph Alphabet proposed to assign lower case characters to columns 6 and 7,^[26] and International Organization for Standardization TC 97 SC 2 voted during October to incorporate the change into its draft standard.^[27] The X3.2.4 task group voted its approval for the change to ASCII at its May 1963 meeting.^[28] Locating the lowercase letters in columns 6 and 7 caused the characters to differ in bit pattern from the upper case by a single bit, which simplified case-insensitive character matching and the construction of keyboards and printers.

The X3 committee made other changes, including other new characters (the brace and vertical line characters),^[29] renaming some control characters (SOM became start of header (SOH)) and moving or removing others (RU was removed).^[30] ASCII was subsequently updated as USASI X3.4-1967, then USASI X3.4-1968, ANSI X3.4-1977, and finally, ANSI X3.4-1986 (the first two are occasionally retronamed ANSI X3.4-1967, and ANSI X3.4-1968).

The X3 committee also addressed how ASCII should be transmitted (least significant bit first), and how it should be recorded on perforated tape. They proposed a 9-track standard for magnetic tape, and attempted to deal with some forms of punched card formats.

ASCII itself was first used commercially during 1963 as a seven-bit teleprinter code for American Telephone & Telegraph's TWX (TeletypeWriter eXchange) network. TWX originally used the earlier five-bit Baudot code, which was also used by the competing Telex teleprinter system. Bob Bemer introduced features such as the escape sequence.^[4] His British colleague Hugh McGregor Ross helped to popularize this work—according to Bemer, "so much so that the code that was to become ASCII was first called the Bemer-Ross Code in Europe".^[31] Because of his extensive work on ASCII, Bemer has been called "the father of ASCII."^[32]

On March 11, 1968, U.S. President Lyndon B. Johnson mandated that all computers purchased by the United States federal government support ASCII, stating:

I have also approved recommendations of the Secretary of Commerce regarding standards for recording the Standard Code for Information Interchange on magnetic tapes and paper tapes when they are used in computer operations. All computers and related equipment configurations brought into the Federal Government inventory on and after July 1, 1969, must have the capability to use the Standard Code for Information Interchange and the formats prescribed by the magnetic tape and paper tape standards when these media are used.^[33]

Other international standards bodies have ratified character encodings such as ISO/IEC 646 that are identical or nearly identical to ASCII, with extensions for characters outside the English alphabet and symbols used outside the United States, such as the symbol for the United Kingdom's pound sterling (£). Almost every country needed an adapted version of ASCII, since ASCII suited the needs of only the USA and a few other countries. For example, Canada had its own version that supported French characters. Other adapted encodings include ISCII (India), VISCII (Vietnam), and YUSCII (Yugoslavia). Although these encodings are sometimes referred to as ASCII, true ASCII is defined strictly only by ANSI standard.

ASCII was incorporated into the Unicode character set as the first 128 symbols, so the ASCII characters have the same numeric codes in both sets. This allows UTF-8 to be backward compatible with ASCII, a significant advantage.

ASCII control characters[link]

ASCII reserves the first 32 codes (numbers 0–31 decimal) for control characters: codes originally intended not to represent printable information, but rather to control devices (such as printers) that make use of ASCII, or to provide meta-information about data streams such as those stored on magnetic tape. For example, character 10 represents the "line feed" function (which causes a printer to advance its paper), and character 8 represents "backspace". RFC 2822 refers to control characters that do not include carriage return, line feed or white space as non-whitespace control characters.^[34] Except for the control characters that prescribe elementary line-oriented formatting, ASCII does not define any mechanism for describing the structure or appearance of text within a document. Other schemes, such as markup languages, address page and document layout and formatting.

The original ASCII standard used only short descriptive phrases for each control character. The ambiguity this caused was sometimes intentional (where a character would be used slightly differently on a terminal link than on a data stream) and sometimes accidental (such as what "delete" means).

Probably the most influential single device on the interpretation of these characters was the Teletype Model 33 ASR, which was a printing terminal with an available paper tape reader/punch option. Paper tape was a very popular medium for long-term program storage through the 1980s, less costly and in some ways less fragile than magnetic tape. In particular, the Teletype Model 33 machine assignments for codes 17 (Control-Q, DC1, also known as XON), 19 (Control-S, DC3, also known as XOFF), and 127 (Delete) became de facto standards. Because the keytop for the O key also showed a left-arrow symbol (from ASCII-1963, which had this character instead of underscore), a noncompliant use of code 15 (Control-O, Shift In) interpreted as "delete previous character" was also adopted by many early timesharing systems but eventually became neglected.

The use of Control-S (XOFF, an abbreviation for transmit off) as a "handshaking" signal warning a sender to stop transmission because of impending overflow, and Control-Q (XON, "transmit on") to resume sending, persists to this day in many systems as a manual output control technique. On some systems Control-S retains its meaning but Control-Q is replaced by a second Control-S to resume output.

Code 127 is officially named "delete" but the Teletype label was "rubout". Since the original standard did not give detailed interpretation for most control codes, interpretations of this code varied. The original Teletype meaning, and the intent of the standard, was to make it an ignored character, the same as NUL (all zeroes). This was useful specifically for paper tape, because punching the all-ones bit pattern on top of an existing mark would obliterate it. Tapes designed to be "hand edited" could even be produced with spaces of extra NULs (blank tape) so that a block of characters could be "rubbed out" and then replacements put into the empty space.

As video terminals began to replace printing ones, the value of the "rubout" character was lost. DEC systems, for example, interpreted "Delete" to mean "remove the character before the cursor" and this interpretation also became common in Unix systems. Most other systems used "Backspace" for that meaning and used "Delete" to mean "remove the character at the cursor". That latter interpretation is the most common now.

Many more of the control codes have been given meanings quite different from their original ones. The "escape" character (ESC, code 27), for example, was intended originally to allow sending other control characters as literals instead of invoking their meaning. This is the same meaning of "escape" encountered in URL encodings, C language strings, and other systems where certain characters have a reserved meaning. Over time this meaning has been co-opted and has eventually been changed. In modern use, an ESC sent to the terminal usually indicates the start of a command sequence, usually in the form of a so-called "ANSI escape code" (or, more properly, a "Control Sequence Introducer") beginning with ESC followed by a "[" (left-bracket) character. An ESC sent from the terminal is most often used as an out-of-band character used to terminate an operation, as in the TECO and vi text editors. In graphical user interface (GUI) and windowing systems, ESC generally causes an application to abort its current operation or to exit (terminate) altogether.

The inherent ambiguity of many control characters, combined with their historical usage, created problems when transferring "plain text" files between systems. The best example of this is the newline problem on various operating systems. Teletype machines required that a line of text be terminated with both "Carriage Return" (which moves the printhead to the beginning of the line) and "Line Feed" (which advances the paper one line without moving the printhead). The name "Carriage Return" comes from the fact that on a manual typewriter the carriage holding the paper moved while the position where the keys struck the ribbon remained stationary. The entire carriage had to be pushed (returned) to the right in order to position the left margin of the paper for the next line.

DEC operating systems (OS/8, RT-11, RSX-11, RSTS, TOPS-10, etc.) used both characters to mark the end of a line so that the console device (originally Teletype machines) would work. By the time so-called "glass TTYs" (later called CRTs or terminals) came along, the convention was so well established that backward compatibility necessitated continuing the convention. When Gary Kildall cloned RT-11 to create CP/M he followed established DEC convention. Until the introduction of PC-DOS in 1981, IBM had no hand in this because their 1970s operating systems used EBCDIC instead of ASCII and they were oriented toward punch-card input and line printer output on which the concept of "carriage return" was meaningless. IBM's PC-DOS (also marketed as MS-DOS by Microsoft) inherited the convention by virtue of being a clone of CP/M, and Windows inherited it from MS-DOS.

Unfortunately, requiring two characters to mark the end of a line introduces unnecessary complexity and questions as to how to interpret each character when encountered alone. To simplify matters, plain text files on Unix and Amiga systems use line feed (LF) alone as a line terminator. The original Macintosh OS, on the other hand, used carriage return (CR) alone as a line terminator, however since Apple replaced it with the Unix-based OS X operating system, they now use line feed (LF) as well.

Transmission of text over the Internet, for protocols as E-mail and the World Wide Web, uses both characters.

Some operating systems such as the pre-VMS DEC operating systems, along with CP/M, tracked file length only in units of disk blocks and used Control-Z (SUB) to mark the end of the actual text in the file. For this reason, EOF, or end-of-file, was used colloquially and conventionally as a three-letter acronym (TLA) for Control-Z instead of SUBstitute. For a variety of reasons, the end-of-text code, ETX aka Control-C, was inappropriate and using Z as the control code to end a file is analogous to it ending the alphabet, a very convenient mnemonic aid. ASCII strings ending with the null character are known as ASCIZ, ASCIIZ or null-terminated strings.

ASCII printable characters[link]

Codes 20_hex to 7E_hex, known as the printable characters, represent letters, digits, punctuation marks, and a few miscellaneous symbols. There are 95 printable characters in total.

Code 20_hex, the space character, denotes the space between words, as produced by the space-bar of a keyboard. Since the space character is considered an invisible graphic (rather than a control character)^[2][1] and thus would not normally be visible, it is represented here by Unicode character U+2420 "␠"; Unicode characters U+2422 "␢" and U+2423 "␣" are also available for use when a visible representation of a space is necessary.

Code 7F_hex corresponds to the non-printable "Delete" (DEL) control character and is therefore omitted from this chart; it is covered in the previous section's chart.

Earlier versions of ASCII used the up-arrow instead of the caret (5E_hex) and the left-arrow instead of the underscore (5F_hex).^[35]

Aliases[link]

A June 1992 RFC^[36] and the Internet Assigned Numbers Authority registry of character sets^[10] recognize the following case-insensitive aliases for ASCII as suitable for use on the Internet:

Of these, the IANA encourages use of the name "US-ASCII" for Internet uses of ASCII. One often finds this in the optional "charset" parameter in the Content-Type header of some MIME messages, in the equivalent "meta" element of some HTML documents, and in the encoding declaration part of the prologue of some XML documents.

Variants[link]

As computer technology spread throughout the world, different standards bodies and corporations developed many variations of ASCII to facilitate the expression of non-English languages that used Roman-based alphabets. One could class some of these variations as "ASCII extensions", although some misuse that term to represent all variants, including those that do not preserve ASCII's character-map in the 7-bit range.

The PETSCII code Commodore International used for their 8-bit systems is probably unique among post-1970 codes in being based on ASCII-1963, instead of the more common ASCII-1967, such as found on the ZX Spectrum computer. Atari and Galaksija computers also used ASCII variants.

Incompatibility vs interoperability[link]

From early in its development,^[37] ASCII was intended to be just one of several national variants of an international character code standard, ultimately published as ISO/IEC 646 (1972), which would share most characters in common but assign other locally-useful characters to several code points reserved for "national use." However, the four years that elapsed between the publication of ASCII-1963 and ISO's first acceptance of an international recommendation during 1967^[38] caused ASCII's choices for the national use characters to seem to be de facto standards for the world, causing confusion and incompatibility once other countries did begin to make their own assignments to these code points.

ISO/IEC 646, like ASCII, was a 7-bit character set. It did not make any additional codes available, so the same code points encoded different characters in different countries. Escape codes were defined to indicate which national variant applied to a piece of text, but they were rarely used, so it was often impossible to know what variant to work with and therefore which character a code represented, and in general text-processing systems could cope with only one variant anyway.

Because the bracket and brace characters of ASCII were assigned to "national use" code points that were used for accented letters in other national variants of ISO/IEC 646, a German, French, or Swedish, etc. programmer using their national variant of ISO/IEC 646, rather than ASCII, had to write, and thus read, something such as

ä aÄiÜ='Ön'; ü

instead of

{ a[i]='\n'; }

C trigraphs were created to solve this problem for ANSI C, although their late introduction and inconsistent implementation in compilers limited their use.

Eventually, as 8-, 16-, and 32-bit computers began to replace 18- and 36-bit computers as the norm, it became common to use an 8-bit byte to store each character in memory, providing an opportunity for extended, 8-bit, relatives of ASCII, with the 128 additional characters providing room to avoid most of the ambiguity that had been necessary in 7-bit codes.

For example, IBM developed 8-bit code pages, such as code page 437, which replaced the control-characters with graphic symbols such as smiley faces, and mapped additional graphic characters to the upper 128 positions. Operating systems such as DOS supported these code-pages, and manufacturers of IBM PCs supported them in hardware. Digital Equipment Corporation developed the Multinational Character Set (DEC-MCS) for use in the popular VT220 terminal.

Eight-bit standards such as ISO/IEC 8859 (derived from the DEC-MCS) and Mac OS Roman developed as true extensions of ASCII, leaving the original character-mapping intact, but adding additional character definitions after the first 128 (i.e., 7-bit) characters. This enabled representation of characters used in a broader range of languages. Because there were several competing 8-bit code standards, they continued to suffer from incompatibilities and limitations. Still, ISO-8859-1 (Latin 1), its variant Windows-1252 (often mislabeled as ISO-8859-1), and the original 7-bit ASCII remain the most common character encodings in use today.

Unicode[link]

Unicode and the ISO/IEC 10646 Universal Character Set (UCS) have a much wider array of characters, and their various encoding forms have begun to supplant ISO/IEC 8859 and ASCII rapidly in many environments. While ASCII is limited to 128 characters, Unicode and the UCS support more characters by separating the concepts of unique identification (using natural numbers called code points) and encoding (to 8-, 16- or 32-bit binary formats, called UTF-8, UTF-16 and UTF-32).

To allow backward compatibility, the 128 ASCII and 256 ISO-8859-1 (Latin 1) characters are assigned Unicode/UCS code points that are the same as their codes in the earlier standards. Therefore, ASCII can be considered a 7-bit encoding scheme for a very small subset of Unicode/UCS, and, conversely, the UTF-8 encoding forms are binary-compatible with ASCII for code points below 128, meaning all ASCII is valid UTF-8. The other encoding forms resemble ASCII in how they represent the first 128 characters of Unicode, but use 16 or 32 bits per character, so they require conversion for compatibility. (similarly UCS-2 is upwards compatible with UTF-16)

Order[link]

ASCII-code order is also called ASCIIbetical order.^[39] Collation of data is sometimes done in this order rather than "standard" alphabetical order (collating sequence). The main deviations in ASCII order are:

• All uppercase come before lowercase letters, for example, "Z" before "a"
• Digits and many punctuation marks come before letters, for example, "4" is before "one"

An intermediate order that can be easily implemented converts uppercase letters to lowercase before comparing ASCII values.

See also[link]

• 3568 ASCII, an asteroid named after the character encoding
• ASCII art
• ASCII Ribbon Campaign
• Extended ASCII
• HTML decimal character rendering

References[link]

Further reading[link]

• Bemer, R. W. (1960). "A Proposal for Character Code Compatibility". Communications of the ACM 3 (2): 71–72. DOI:10.1145/366959.366961. 
• Bemer, R. W. (May 23, 2003). "The Babel of Codes Prior to ASCII: The 1960 Survey of Coded Character Sets: The Reasons for ASCII". http://www.trailing-edge.com/~bobbemer/SURVEY.HTM.  (from H.J. Smith, Jr., F.A. Williams, "Survey of punched card codes", Communications of the ACM 3, 639 & 642, December 1960)
• Robinson, G. S. & Cargill, C. (1996). "History and impact of computer standards". Computer 29 (10): 79–85. DOI:10.1109/2.539725. 
• American National Standards Institute (1977). American National Standard Code for Information Interchange. The Institute. 
• Mackenzie, Charles E. (1980). Coded Character Sets, History and Development. Addison-Wesley. ISBN 0-201-14460-3. 

External links[link]

• The ASCII subset of Unicode
• The Evolution of Character Codes, 1874–1968
• Scanned copy of American Standard Code for Information Interchange ASA standard X3.4-1963
• ASCII at the Open Directory Project

v t e Character encodings Character sets Early telecommunications ASCII ISO/IEC 646 ISO/IEC 6937 T.61 sixbit code pages Baudot code Morse code Chinese telegraph code ISO/IEC 8859 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 Bibliographic use ANSEL ISO 5426 / 5426-2 / 5427 / 5428 / 6438 / 6861 / 6862 / 10585 / 10586 / 10754 / 11822 MARC-8 National standards ArmSCII CNS 11643 GOST 10859 GB 2312 HKSCS ISCII JIS X 0201 JIS X 0208 JIS X 0212 JIS X 0213 KPS 9566 KS X 1001 PASCII TIS-620 TSCII VISCII YUSCII EUC CN JP KR TW ISO/IEC 2022 CN JP KR CCCII MacOS codepages ("scripts") Arabic CentralEurRoman ChineseSimp / EUC-CN ChineseTrad / Big5 Croatian Cyrillic Devanagari Dingbats Farsi Greek Gujarati Gurmukhi Hebrew Icelandic Japanese / ShiftJIS Korean / EUC-KR Roman Romanian Symbol Thai / TIS-620 Turkish Ukrainian DOS codepages 437 720 737 775 850 852 855 857 858 860 861 862 863 864 865 866 869 Kamenický Mazovia MIK Iran System Windows codepages 874 / TIS-620 932 / Shift JIS 936 / GBK 949 / EUC-KR 950 / Big5 1250 1251 1252 1253 1254 1255 1256 1257 1258 1361 54936 / GB18030 EBCDIC codepages 37/1140 273/1141 277/1142 278/1143 280/1144 284/1145 285/1146 297/1147 420/16804 424/12712 500/1148 838/1160 871/1149 875/9067 930/1390 933/1364 937/1371 935/1388 939/1399 1025/1154 1026/1155 1047/924 1112/1156 1122/1157 1123/1158 1130/1164 JEF KEIS Platform specific ATASCII CDC display code DEC-MCS DEC Radix-50 Fieldata GSM 03.38 HP roman8 PETSCII TI calculator character sets WISCII ZX Spectrum character set Unicode / ISO/IEC 10646 UTF-8 UTF-16/UCS-2 UTF-32/UCS-4 UTF-7 UTF-1 UTF-EBCDIC GB 18030 SCSU BOCU-1 Miscellaneous codepages APL Cork HZ IBM code page 1133 KOI8 TRON Related topics control character (C0 C1) CCSID Character encodings in HTML charset detection Han unification ISO 6429/IEC 6429/ANSI X3.64 mojibake