in Alberta, Canada, are a very large source of bitumen, which can be upgraded to synthetic crude oil.]]

Bituminous sands, colloquially known as oil sands or tar sands, are a type of unconventional petroleum deposit. The sands contain naturally occurring mixtures of sand, clay, water, and a dense and extremely viscous form of petroleum technically referred to as bitumen (or colloquially "tar" due to its similar appearance, odour, and colour). Oil sands are found in large amounts in many countries throughout the world, but are found in extremely large quantities in Canada and Venezuela.

The crude bitumen contained in the Canadian oil sands is described by Canadian authorities as "petroleum that exists in the semi-solid or solid phase in natural deposits. Bitumen is a thick, sticky form of crude oil, so heavy and viscous (thick) that it will not flow unless heated or diluted with lighter hydrocarbons. At room temperature, it is much like cold molasses". Venezuelan authorities often refer to similar types of crude oil as extra-heavy oil, because Venezuelan reservoirs are warmer and the oil is somewhat less viscous, allowing it to flow more easily.

Oil sands reserves have only recently been considered to be part of the world's oil reserves, as higher oil prices and new technology enable them to be profitably extracted and upgraded to usable products. They are often referred to as unconventional oil or crude bitumen, in order to distinguish the bitumen extracted from oil sands from the free-flowing hydrocarbon mixtures known as crude oil traditionally produced from oil wells.

Making liquid fuels from oil sands requires energy for steam injection and refining. This process generates two to four times the amount of greenhouse gases per barrel of final product as the production of conventional oil. If combustion of the final products is included, the so-called "Well to Wheels" approach, oil sands extraction, upgrade and use emits 10 to 45% more greenhouse gases than conventional crude.

History

The exploitation of bituminous deposits and seeps dates back to paleolithic times. The earliest known use of bitumen was by Neanderthals, some 40,000 years ago. Bitumen has been found adhering to stone tools used by Neanderthals at sites in Syria. After the arrival of Homo sapiens, humans used bitumen for construction of buildings and water proofing of reed boats, among other uses. In ancient Egypt, the use of bitumen was important in creating Egyptian mummies—in fact, the word mummy is derived from the Arab word mūmiyyah, which means bitumen.

In ancient times, bitumen was primarily a Mesopotamian commodity used by the Sumerians and Babylonians, although it was also found in the Levant and Persia. Along the Tigris and Euphrates rivers, the area was littered with hundreds of pure bitumen seepages. The Mesopotamians used the bitumen for waterproofing boats and buildings. In North America, the early European fur traders found Canadian First Nations using bitumen from the vast Athabasca oil sands to waterproof their birch bark canoes. In Europe, they were extensively mined near the European city of Pechelbronn, where the vapor separation process was in use in 1742.

The name tar sands was applied to bituminous sands in the late 19th and early 20th century. People who saw the bituminous sands during this period were familiar with the large amounts of tar residue produced in urban areas as a by-product of the manufacture of coal gas for urban heating and lighting. The word "tar" to describe these natural bitumen deposits is really a misnomer, since, chemically speaking, tar is a man-made substance produced by the destructive distillation of organic material, usually coal. Since then, coal gas has almost completely been replaced by natural gas as a fuel, and coal tar as a material for paving roads has been replaced by the petroleum product asphalt. Naturally occurring bitumen is chemically more similar to asphalt than to tar, and the term oil sands (or oilsands) is more commonly used in the producing areas than tar sands because synthetic oil is what is manufactured from the bitumen.

Oil sands are now considered a serious alternative to conventional crude oil, since crude oil is becoming scarcer. Oil sands and oil shale have the potential to generate oil for centuries.

Reserves

Many countries in the world have large deposits of oil sands, including the United States, Russia, and various countries in the Middle East. However, the world's largest deposits occur in two countries: Canada and Venezuela, each of which have oil sand reserves approximately equal to the world's total reserves of conventional crude oil. As a result of the development of Canadian oil sands reserves, 44% of Canadian oil production in 2007 was from oil sands, with an additional 18% being heavy crude oil, while light oil and condensate had declined to 38% of the total. Because growth of oil sands production has exceeded declines in conventional crude oil production, Canada has become the largest supplier of oil and refined products to the United States, ahead of Saudi Arabia and Mexico. Venezuelan production is also very large, but due to political problems within its national oil company, estimates of its production data are not reliable. Outside analysts believe Venezuela's oil production has declined in recent years, though there is much debate on whether this decline is depletion-related or not.

Oil sands may represent as much as two-thirds of the world's total "liquid" hydrocarbon resource, with at least in the Canadian Athabasca Oil Sands (assuming a 10% recovery).

In October 2009, the USGS updated the Orinoco oil sands (Venezuela) mean estimated recoverable value to , making it "one of the world's largest recoverable" oil deposits.

Between them, the Canadian and Venezuelan deposits contain about of recoverable oil, compared to of conventional oil worldwide, most of it in Saudi Arabia and other Middle-Eastern countries.

Production

Bituminous sands are a major source of unconventional oil. Conventional crude oil is normally extracted from the ground by drilling oil wells into a petroleum reservoir, allowing oil to flow into them under natural reservoir pressures, although artificial lift and techniques such as water flooding and gas injection are usually required to maintain production as reservoir pressure drops toward the end of a field's life. Because extra-heavy oil and bitumen flow very slowly, if at all, toward producing wells under normal reservoir conditions, the sands must be extracted by strip mining or the oil made to flow into wells by in situ techniques, which reduce the viscosity by injecting steam, solvents, and/or hot air into the sands. These processes can use more water and require larger amounts of energy than conventional oil extraction, although many conventional oil fields also require large amounts of water and energy to achieve good rates of production.

This is because heavy crude feedstock needs pre-processing before it is fit for conventional refineries. This pre-processing is called 'upgrading', the key components of which are as follows: # removal of water, sand, physical waste, and lighter products # catalytic purification by hydrodemetallisation (HDM), hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) # hydrogenation through carbon rejection or catalytic hydrocracking (HCR)

As carbon rejection is very inefficient and wasteful in most cases, catalytic hydrocracking is preferred in most cases. All these processes take large amounts of energy and water, while emitting more carbon dioxide than conventional oil.

Catalytic purification and hydrocracking are together known as hydroprocessing. The big challenge in hydroprocessing is to deal with the impurities found in heavy crude, as they poison the catalysts over time. Many efforts have been made to deal with this to ensure high activity and long life of a catalyst. Catalyst materials and pore size distributions are key parameters that need to be optimized to deal with these challenge and this varies from place to place, depending on the kind of feedstock present.

At the present time, only Canada has a large-scale commercial oil sands industry, though a small amount of oil from oil sands is produced in Venezuela. Because of increasing oil sands production, Canada has become the largest single supplier of oil and products to the United States. Oil sands now are the source of almost half of Canada's oil production, although due to the 2008 economic downturn work on new projects has been deferred, while Venezuelan production has been declining in recent years. Oil is not produced from oil sands on a significant level in other countries.

Transportation and refining

The heavy crude oil or crude bitumen extracted from oil sands is a viscous, solid or semisolid form that does not easily flow at normal oil pipeline temperatures, making it difficult to transport to market and expensive to process into gasoline, diesel fuel, and other products. Despite the difficulty and cost, oil sands are now being mined by energy companies on a vast scale to extract the bitumen, which is then converted into synthetic oil (syncrude) by bitumen upgraders, or refined directly into petroleum products by specialized refineries.

As oil source, by location

Canada

, Alberta]] Canada is the largest supplier of crude oil and refined products to the United States, supplying about 20% of total U.S. imports, and exports more oil and products to the U.S. than it consumes itself. In 2006, bitumen production averaged through 81 oil sands projects, representing 47% of total Canadian petroleum production. This proportion is expected to increase in coming decades as bitumen production grows while conventional oil production declines. upgraders were slated to begin output in 4–5 years.

With the development of new in-situ production techniques such as steam assisted gravity drainage, and with the oil price increases since 2003, there were several dozen companies planning nearly 100 oil sands projects in Canada, totaling nearly $100 billion in capital investment. With 2007 crude oil prices significantly in excess of the current average cost of production of $28 per barrel of bitumen, all of these projects appear likely to be profitable. However, bitumen production costs are rising rapidly, with production cost increases of 55% since 2005, due to shortages of labor and materials.

With oil prices setting new highs in 2007, tax incentives were no longer necessary to encourage oil sands projects in Canada. In July of that year, Royal Dutch Shell released its 2006 annual report and announced that its Canadian oil sands unit made an after tax profit of $21.75 per barrel, nearly double its worldwide profit of $12.41 per barrel on conventional crude oil. A few days later, Shell announced it had filed for regulatory approval to build a $27 billion oil sands refinery in Alberta, one of $38 billion in new oil sands projects announced that week.

Oil sands development in Alberta is strongly opposed by Canadian and other environmentalists. Meanwhile, Canada is the largest source of oil for the United States, supplying nearly a million barrels a day from oil sand sources. A pipeline from Alberta to Gulf coast refineries, Keystone XL is under consideration.

Venezuela

) exposed at the Stollmeyer Quarry, near Parrylands, Trinidad and Tobago.]] Located in eastern Venezuela, north of the Orinoco River, the Orinoco oil belt vies with the Canadian oil sand for largest known accumulation of bitumen in the world. Venezuela prefers to call its oil sands "extra heavy oil", and although the distinction is somewhat academic, the extra heavy crude oil deposit of the Orinoco Belt represent nearly 90% of the known global reserves of extra heavy crude oil, and nearly 45% of the combined crude bitumen and extra-heavy crude oil reserves in the world.

Bitumen and extra-heavy oil are closely related types of petroleum, differing only in the degree by which they have been degraded from the original crude oil by bacteria and erosion. The Venezuelan deposits are less degraded than the Canadian deposits and are at a higher temperature (over 50 degrees Celsius versus freezing for northern Canada), making them easier to extract by conventional techniques.

Although Venezuela's extra-heavy oil is easier to produce than Canada's bitumen, it is still too heavy to transport by pipeline or process in normal refineries. Lacking access to first-world capital and technological prowess, Venezuela has not been able to design and build the kind of upgraders and heavy oil refineries that Canada has. In the early 1980s, the state oil company, PDVSA, developed a method of using the extra-heavy oil resources by emulsifying it with water (70% extra-heavy oil, 30% water) to allow it to flow in pipelines. The resulting product, called Orimulsion, can be burned in boilers as a replacement for coal and heavy fuel oil with only minor modifications. Unfortunately, the fuel’s high sulphur content and emission of particulates make it difficult to meet increasingly strict international environmental regulations.

Further development of the Venezuelan resources has been impeded by political unrest. Venezuela is less politically stable than a country such as Canada, and a two-month strike in 2002–2003 by employees of the state oil company was followed by the dismissal of nearly 20,000 staff. As tensions resolved, strike leaders pointed to the reduction in Venezuela's domestic crude output as an argument that Venezuela's oil production had fallen. However, Venezuela's oil sands crude production, which sometimes wasn't counted in its total, has increased from to between 2001 and 2006 (Venezuela's figures; IAEA says 300,000 bbl/d).

USA

In the United States, oil sands resources are primarily concentrated in Eastern Utah. With a total of of oil (known and potential) in eight major deposits in the Utah counties of Carbon, Garfield, Grand, Uintah, and Wayne. Currently, oil is not produced from oil sands on a significant commercial level in the United States, although the U.S. imports twenty percent of its oil and refined products from Canada, and over fifty percent of Canadian oil production is from oil sands. In addition to being much smaller than the oil sands deposits in Alberta, Canada, the U.S. oil sands are hydrocarbon wet, whereas the Canadian oil sands are water wet. As a result of this difference, extraction techniques for the Utah oil sands will be different than those used for the Alberta oil sands. A considerable amount of research has been done in the quest for commercially viable production technology to be employed in the development of the Utah oil sands. A special concern is the relatively arid climate of eastern Utah, as a large amount of water may be required by some processing techniques.

Other countries

Several other countries hold oil sands deposits which are smaller by orders of magnitude. Russia holds oil sands in two main regions. The Volga-Urals basins (in and around Tatarstan), which is an important but very mature province in terms of conventional oil, holds large amounts of oil sands in a shallow permian formation. Exploitation has not gone beyond pilot stage yet. Other, less known, deposits are located in eastern Siberia.

In the Republic of the Congo, the Italian oil company Eni have announced in May 2008 a project to develop the small oil sands deposit in order to produce in 2014. Reserves are estimated between 0.5 and .

In Madagascar, Tsimiroro and Bemolanga are two heavy oil sands deposits with a pilot well already producing small amounts of oil in Tsimiroro. and larger scale exploitation in the early planning phase.

Extraction process

Surface mining

Since Great Canadian Oil Sands (now Suncor) started operation of its mine in 1967, bitumen has been extracted on a commercial scale from the Athabasca Oil Sands by surface mining. In the Athabasca sands there are very large amounts of bitumen covered by little overburden, making surface mining the most efficient method of extracting it. The overburden consists of water-laden muskeg (peat bog) over top of clay and barren sand. The oil sands themselves are typically 40 to 60 metres deep, sitting on top of flat limestone rock. Originally, the sands were mined with draglines and bucket-wheel excavators and moved to the processing plants by conveyor belts. In recent years companies such as Syncrude and Suncor have switched to much cheaper shovel-and-truck operations using the biggest power shovels (100 or more tons) and dump trucks (400 tons) in the world. This has held production costs to around $27 per barrel of synthetic crude oil despite rising energy and labour costs.

After excavation, hot water and caustic soda (NaOH) is added to the sand, and the resulting slurry is piped to the extraction plant where it is agitated and the oil skimmed from the top. Provided that the water chemistry is appropriate to allow bitumen to separate from sand and clay, the combination of hot water and agitation releases bitumen from the oil sand, and allows small air bubbles to attach to the bitumen droplets. The bitumen froth floats to the top of separation vessels, and is further treated to remove residual water and fine solids. Bitumen is much thicker than traditional crude oil, so it must be either mixed with lighter petroleum (either liquid or gas) or chemically split before it can be transported by pipeline for upgrading into synthetic crude oil.

The bitumen is then transported and eventually upgraded into synthetic crude oil. About two tons of oil sands are required to produce one barrel (roughly 1/8 of a ton) of oil. Originally, roughly 75% of the bitumen was recovered from the sand. However, recent enhancements to this method include Tailings Oil Recovery (TOR) units which recover oil from the tailings, Diluent Recovery Units to recover naptha from the froth, Inclined Plate Settlers (IPS) and disc centrifuges. These allow the extraction plants to recover well over 90% of the bitumen in the sand. After oil extraction, the spent sand and other materials are then returned to the mine, which is eventually reclaimed.

Alberta Taciuk Process technology extracts bitumen from oil sands through a dry-retorting. During this process, oil sand is moved through a rotating drum, cracking the bitumen with heat and producing lighter hydrocarbons. Although tested, this technology is not in commercial use yet.

Four oil sands mines are currently in operation and two more (Jackpine and Kearl) are in the initial stages of development. The original Suncor mine opened in 1967, while the Syncrude mine started in 1978, Shell Canada opened its Muskeg River mine (Albian Sands) in 2003 and Canadian Natural Resources Ltd opened its Horizon Project in 2009. New mines under construction or undergoing approval include Shell Canada's, Imperial Oil's Kearl Oil Sands Project, Synenco Energy's, and Suncor's.

It is estimated that approximately 90% of the Alberta oil sands and nearly all of Venezuelan sands are too far below the surface to use open-pit mining. Several in-situ techniques have been developed to extract this oil.

Cold flow

In this technique, also known as cold heavy oil production with sand (CHOPS), the oil is simply pumped out of the sands, often using progressive cavity pumps. This only works well in areas where the oil is fluid enough. It is commonly used in Venezuela (where the extra-heavy oil is at 50 degrees Celsius), and also in the Wabasca, Alberta Oil Sands, the southern part of the Cold Lake, Alberta Oil Sands and the Peace River Oil Sands. It has the advantage of being cheap and the disadvantage that it recovers only 5-6% of the oil in place.

Some years ago Canadian oil companies discovered that if they removed the sand filters from the wells and produced as much sand as possible with the oil, production rates improved remarkably. This technique became known as Cold Heavy Oil Production with Sand (CHOPS). Further research disclosed that pumping out sand opened "wormholes" in the sand formation which allowed more oil to reach the wellbore. The advantage of this method is better production rates and recovery (around 10%) and the disadvantage that disposing of the produced sand is a problem. A novel way to do this was spreading it on rural roads, which rural governments liked because the oily sand reduced dust and the oil companies did their road maintenance for them. However, governments have become concerned about the large volume and composition of oil spread on roads, so in recent years disposing of oily sand in underground salt caverns has become more common.

Cyclic Steam Stimulation (CSS)

The use of steam injection to recover heavy oil has been in use in the oil fields of California since the 1950s. The Cyclic Steam Stimulation or "huff-and-puff" method has been in use by Imperial Oil at Cold Lake since 1985 and is also used by Canadian Natural Resources at Primrose and Wolf Lake and by Shell Canada at Peace River. In this method, the well is put through cycles of steam injection, soak, and oil production. First, steam is injected into a well at a temperature of 300 to 340 degrees Celsius for a period of weeks to months; then, the well is allowed to sit for days to weeks to allow heat to soak into the formation; and, later, the hot oil is pumped out of the well for a period of weeks or months. Once the production rate falls off, the well is put through another cycle of injection, soak and production. This process is repeated until the cost of injecting steam becomes higher than the money made from producing oil. The CSS method has the advantage that recovery factors are around 20 to 25% and the disadvantage that the cost to inject steam is high.

Steam Assisted Gravity Drainage (SAGD)

Steam assisted gravity drainage was developed in the 1980s by the Alberta Oil Sands Technology and Research Authority and fortuitously coincided with improvements in directional drilling technology that made it quick and inexpensive to do by the mid 1990s. In SAGD, two horizontal wells are drilled in the oil sands, one at the bottom of the formation and another about 5 metres above it. These wells are typically drilled in groups off central pads and can extend for miles in all directions. In each well pair, steam is injected into the upper well, the heat melts the bitumen, which allows it to flow into the lower well, where it is pumped to the surface. and Christina Lake developments, ConocoPhillips' Surmont project, Devon Canada's Jackfish project, and Derek Oil & Gas's LAK Ranch project. Alberta's OSUM Corp has combined proven underground mining technology with SAGD to enable higher recovery rates by running wells underground from within the oil sands deposit, thus also reducing energy requirements compared to traditional SAGD. This particular technology application is in its testing phase.

Vapor Extraction Process (VAPEX)

VAPEX is similar to SAGD but instead of steam, hydrocarbon solvents are injected into the upper well to dilute the bitumen and allow it to flow into the lower well. It has the advantage of much better energy efficiency over steam injection, and it does some partial upgrading of bitumen to oil right in the formation. It is very new, but the process has attracted much attention from oil companies, who are beginning to experiment with it.

The above three methods are not mutually exclusive. It is becoming common for wells to be put through one CSS injection-soak-production cycle to condition the formation prior to going to SAGD production, and companies are experimenting with combining VAPEX with SAGD to improve recovery rates and lower energy costs.

Toe to Heel Air Injection (THAI)

This is a very new and experimental method that combines a vertical air injection well with a horizontal production well. The process ignites oil in the reservoir and creates a vertical wall of fire moving from the "toe" of the horizontal well toward the "heel", which burns the heavier oil components and upgrades some of the heavy bitumen into lighter oil right in the formation. Historically fireflood projects have not worked out well because of difficulty in controlling the flame front and a propensity to set the producing wells on fire. However, some oil companies feel the THAI method will be more controllable and practical, and have the advantage of not requiring energy to create steam.

Advocates of this method of extraction state that it uses less freshwater, produces 50% less greenhouse gases, and has a smaller footprint than other production techniques.

Petrobank Energy and Resources Ltd. has reported encouraging results from their test wells in Alberta, with production rates of up to per well, and the oil upgraded from 8 to 12 API degrees. The company hopes to get a further 7-degree upgrade from its CAPRI (controlled atmospheric pressure resin infusion) system, which pulls the oil through a catalyst lining the lower pipe.

Combustion Overhead Gravity Drainage (COGD)

This is an experimental method that employs a number of vertical air injection wells above a horizontal production well located at the base of the bitumen pay zone. An initial Steam Cycle similar to CSS is used to prepare the bitumen for ignition and mobility. Following that cycle, air is injected into the vertical wells, igniting the upper bitumen and mobilizing (through heating) the lower bitumen to flow into the production well. It is expected that COGD will result in water savings of 80% compared to SAGD.

Environmental issues

. Note the close proximity of the Athabasca River to the tailings pond, which stores contaminated water from processing the oil sands. NASA Earth Observatory image, 2009.]]

Like all petrolium production, oil sands operations can have an adverse effect on the environment. Oil sands projects can potentially affect: the land when the bitumen is initially mined and with large deposits of toxic chemicals; the water during the separation process and through the drainage of rivers; and the air due to the release of carbon dioxide and other emissions. Additional indirect environmental effects are that the petroleum products produced are mostly burned, releasing carbon dioxide into the atmosphere. Heavy metals such as vanadium, nickel, lead, cobalt, mercury, chromium, cadmium, arsenic, selenium, copper, manganese, iron and zinc are present in oil sands.

Air

The Wood Buffalo Environmental Association (WBEA) monitors the air in the Regional Municipality of Wood Buffalo continuously. This is done through a variety of air, land and human monitoring programs. The information collected is openly shared with stakeholders and the public.

Since 1995, monitoring in the oil sands region shows improved or no change in long term air quality for the five key air quality pollutants — carbon monoxide, nitrogen dioxide, ozone, fine particulate matter (PM2.5) and sulphur dioxide — used to calculate the Air Quality Index. Air monitoring has shown significant increases in exceedances of hydrogen sulfide () both in the Fort McMurray area and near the oil sands upgraders.

Hydrogen sulfide is the chemical compound with the formula . This colorless, toxic and flammable gas is responsible for the foul odour of rotten eggs. Hydrogen sulfide gas occurs naturally in crude petroleum, natural gas, volcanic gases and hot springs. It also can result from bacterial breakdown of organic matter and be produced by human and animal wastes.

In 2007, the Alberta government issued an Environmental Protection Order to Suncor Energy Inc. The order comes in response to numerous occasions when ground level concentration (GLC) for exceeded acceptable standards. Environmental Protection Orders are issued under the authority of Alberta’s Environmental Protection and Enhancement Act. Alberta Environment can issue Environmental Protection Orders to remedy environmental problems where there has been a release of a substance that has caused or may cause an adverse effect to the environment.

Land

A large part of oil sands mining operations involves clearing trees and brush from a site and removing the "overburden" — the topsoil, muskeg, sand, clay and gravel — that sits atop the oil sands deposit. Approximately two tons of oil sands are needed to produce one barrel of oil (roughly 1/8 of a ton). As a condition of licensing, projects are required to implement a reclamation plan. The mining industry asserts that the boreal forest will eventually colonize the reclaimed lands, but that their operations are massive and work on long-term timeframes. As of 2006/2007 (the most recent data available), about of land in the oil sands region have been disturbed, and of that land is under reclamation. In March 2008, Alberta issued the first-ever oil sands land reclamation certificate to Syncrude Canada Ltd. for the parcel of land known as Gateway Hill approximately north of Fort McMurray. Several reclamation certificate applications for oil sands projects are expected within the next 10 years.

Water

Between 2 to 4.5 volume units of water are used to produce each volume unit of synthetic crude oil (SCO) in an ex-situ mining operation. Despite recycling, almost all of it ends up in tailings ponds, which, as of 2007, covered an area of approximately . In SAGD operations, 90 to 95 percent of the water is recycled and only about 0.2 volume units of water is used per volume unit of bitumen produced. Large amounts of water are used for oil sands operations – Greenpeace gives the number as 349 million cubic metres per year, twice the amount of water used by the city of Calgary. It is unclear if this is the amount of water they are licensed to remove from the Athabasca or the actual use and how up to date the statistic is. The Athabasca River is also much larger than Bow and Elbow rivers that flow through Calgary.

The Athabasca River is the ninth longest river in Canada running from the Athabasca Glacier in west-central Alberta to Lake Athabasca in northeastern Alberta. The average annual flow just downstream of Fort McMurray is 633 cubic metres per second with its highest daily average measuring 1200 cubic metres per second.

Current water license allocations totals about 1.8 percent of the Athabasca river flow. Actual use in 2006 was about 0.4 percent. In addition, the Alberta government sets strict limits on how much water oil sands companies can remove from the Athabasca River. According to the Water Management Framework for the Lower Athabasca River, during periods of low river flow water consumption from the Athabasca River is limited to 1.3 per cent of annual average flow. The province of Alberta is also looking into cooperative withdrawal agreements between oil sands operators.

In October 2009, Suncor Energy announced it was seeking government approval for a new process to recover tailings called Tailings Reduction Operations (TRO), which accelerates the settling of fine clay, sand, water, and residual bitumen in ponds after oil sands extraction. The technology involves dredging mature tailings from a pond bottom, mixing the suspension with a polymer flocculent, and spreading the sludge-like mixture over a “beach” with a shallow grade. According to the company, the process could reduce the time for water reclamation from tailings to weeks rather than years, with the recovered water being recycled into the oil sands plant. In addition to reducing the number of tailing ponds, Suncor claims TRO could reduce the time to reclaim a tailing pond from 40 years at present to 7–10 years, with land rehabilitation continuously following 7 to 10 years behind the mining operations.

In December 2010, the Oil Sands Advisory Panel, commissioned by former environment minister Jim Prentice, found that the system in place for monitoring water quality in the region, including work by the Regional Aquatic Monitoring Program, the Alberta Water Research Institute, the Cumulative Environmental Management Association and others, was piecemeal and should become more comprehensive and coordinated.

A major hindrance to the monitoring of oil sands produced waters has been the lack of identification of individual compounds present. By better understanding the nature of the highly complex mixture of compounds, including naphthenic acids, it may be possible to monitor rivers for leachate and also to remove toxic components. Such identification of individual acids has for many years proved to be impossible but a recent breakthrough in analysis has begun to reveal what is in the oil sands produced waters.

Climate change

The production of bitumen and synthetic crude oil emits more greenhouse gas (GHG) than the production of conventional crude oil, and has been identified as the largest contributor to GHG emissions growth in Canada, as it accounts for 40 million tons of emissions per year. Environment Canada claims the oil sands make up 5% of Canada's greenhouse gas emissions, or 0.1% of global greenhouse gas emissions. It predicts the oil sands will grow to make up 8% of Canada's greenhouse gas emissions by 2015. total emissions were expected to increase due to higher production levels. As of 2006, to produce one barrel of oil from the oil sands released almost of GHG with total emissions estimated to be per year by 2015.

In January 2008, the Alberta government released Alberta’s 2008 Climate Change Strategy. The new plan aims to cut the projected 400 Mt in half by 2050, with a 139 Mt reduction coming from carbon capture and storage — the bulk of those reductions (100 Mt) will come from activities related to oil sands production.

A 2009 study by CERA estimated that production from Canada's oil sands emits "about 5 percent to 15 percent more carbon dioxide, over the "well-to-wheels" lifetime analysis of the fuel, than average crude oil." Author and investigative journalist David Strahan that same year stated that IEA figures show that carbon dioxide emissions from the tar sands are 20% higher than average emissions from oil With coal's CO₂ emissions about one-third higher than convention oil's , this would make the tar sands' emissions equal to about 90% of the CO₂ released from coal.

On September 21, 2010, a study by "IHS (Information Handling Services) Cambridge Energy Research Associates (IHS CERA)" found that fuels made from Canadian oil sands "result in significantly lower greenhouse gas (GHG) emissions than many commonly cited estimates... Oil sands products imported to the United States result in GHG emissions that are, on average, six percent higher than the average crude consumed in the country. This level places oil sands on par with other sources of U.S. crude imports, including crudes from Nigeria, Venezuela and some domestically produced oil, the report finds."

Carbon dioxide sequestration

To offset greenhouse gas emissions from the oil sands and elsewhere in Alberta, sequestering carbon dioxide emissions inside depleted oil and gas reservoirs has been proposed. This technology is inherited from Enhanced oil recovery methods, which have been in use for several decades. In July 2008, the Alberta government announced a C$2 billion fund to support sequestration projects in Alberta power plants (largely coal) and oil sands extraction and upgrading facilities.

Aquatic life deformities

There is conflicting research on the effects of the oil sands on aquatic life in the Canadian oil sands development. In 2007, Environment Canada completed a study that shows high deformity rates in fish embryos exposed to the oil sands. David W. Schindler, a limnologist from the University of Alberta, published a study on Alberta's oil sands' contribution of aromatic polycyclic compounds, some of which are known carcinogens, to the Athabasca River and its tributaries. Scientists, local doctors, and residents supported a letter sent to the Prime Minister in September 2010 calling for an independent study of Lake Athabasca (which is downstream of the oil sands) to be initiated due to the rise of deformities and tumors found in fish caught there. The bulk of the research that defends the oil sands development is done by the Regional Aquatics Monitoring Program, RAMP. RAMP studies show that deformity rates are normal compared to historical data and the deformity rates in rivers upstream of the oil sands. It should be noted that RAMP is affiliated with the oil industry and its research data is submitted to environmental government agencies but unlike academia where peer review happens on a per study basis, RAMP does a peer review of the entire organization only once every five years.

Concerns of environmentalists

The environmental impact caused by oil sand extraction is frequently criticized by environmental groups such as Greenpeace. Environmentalists state that their main concerns with oil sands are land damage, including the substantial degradation in the land's ability to support forestry and farming, greenhouse gas emissions, and water use. Oil sands extraction is generally held to be more environmentally damaging than conventional crude oil — carbon dioxide "well-to-pump" emissions, for example, are estimated to be about 1.3-1.7 times that of conventional crude.

Input energy

Approximately 1.0 – 1.25 gigajoule of energy is needed to extract a barrel of bitumen and upgrade it to synthetic crude. As of 2006, most of this is produced by burning natural gas. Since a barrel of oil equivalent is about 6.117 gigajoules, this extracts about 5 or 6 times as much energy as is consumed. Energy efficiency is expected to improve to 0.7 gigajoules of energy per barrel by 2015, giving an EROEI of about 9. However, since natural gas production in Alberta peaked in 2001 and has been static ever since, it is likely oil sands requirements will be met by cutting back natural gas exports to the U.S.

Alternatives to natural gas exist and are available in the oil sands area. Bitumen can itself be used as the fuel, consuming about 30-35% of the raw bitumen per produced unit of synthetic crude. Nexen's Long Lake project will use a proprietary deasphalting technology to upgrade the bitumen, using asphaltene residue fed to a gasifier whose syngas will be used by a cogeneration turbine and a hydrogen producing unit, providing all the energy needs of the project: steam, hydrogen, and electricity. Thus, it will produce syncrude without consuming natural gas, but the capital cost is very high.

Coal is widely available in Alberta and is inexpensive, but produces large amounts of greenhouse gases. Nuclear power is another option which has been proposed, but did not appear to be economic as of 2005. In early 2007 the Canadian House of Commons Standing Committee on Industry, Science and Technology considered that the use of nuclear power to process oil sands could reduce CO₂ emissions and help Canada meet its Kyoto commitments, as it would require nearly 12 GW to meet production growth to 2015, but the implications of building reactors in northern Alberta were not yet well understood. Energy Alberta Corporation announced in 2007 that they had applied for a license to build a new nuclear plant at Lac Cardinal, 30 km west of the town of Peace River. The application would see an initial twin AECL Advanced CANDU Reactor ACR-1000 plant go online in 2017, producing 2.2 GW (electric). At 6.117 GJ/barrel, this is equivalent to conserving . On November 30, 2007 Bruce Power, which operates eight CANDU reactors in Ontario, signed a letter of intent to acquire Energy Alberta and take over the project.

See also

Beaver river sandstone

Bituminous rocks

History of the petroleum industry in Canada (oil sands and heavy oil)

Oil megaprojects

Petroleum industry

Project Oilsand

Oil shale

RAVEN (Respecting Aboriginal Values & Environmental Needs)

Steam injection (oil industry)

World energy resources and consumption

Thermal depolymerization

Utah Oil Sands

References

Further reading

External links

Oil Sands Discovery Centre, Fort McMurray, Alberta, Canada

OilSandsWatch.org, Pembina Institute advocacy site

"Tar Sands: The Selling of Alberta", Canadian Broadcasting Corporation, 12 March 2008

Interim Report Appendix Fact Sheet (PDF file), Alberta stakeholder consultations

About the Alberta tar sands, environmental issues, Sierra Club advocacy site

Eddy Isaacs, Canadian Oil Sands: Development and Future Outlook, 14 February 2005

Edward Burtynsky, An aerial look at the Alberta Tar Sands

Guy Caruso, When Will World Oil Production Peak?, Energy Information Administration, U.S. Department of Energy, for 10th Annual Asia Oil and Gas Conference, Kuala Lumpur, Malaysia. 13 June 2005

G.R. Gray, R. Luhning: Bitumen The Canadian Encyclopedia

Canada's Highway to Hell On Earth Magazine, Natural Resources Defense Council 1 September 2007

Jiri Rezac, Alberta Oilsands photo story and aerials

Exploring the Alberta tar sands, Citizenshift, National Film Board of Canada

Indigenous Groups Lead Struggle Against Canada’s Tar Sands - video report by Democracy Now!

[phttp://www.goodwithmoney.co.uk/toxicfuels The Co-operative's Toxic Fuels campaign to stop tar sands expansion]

Extraction of vanadium from oil sands

Category:Petroleum geology Category:Petroleum economics and industry

Canadians (singular Canadian) are the people who are identified with the country of Canada. This connection may be genetic, residential, legal, historical, cultural or ethnic. For most Canadians, several (frequently all) of those types of connections exist and are the source(s) of them being considered Canadians.

Aside from the Aboriginal peoples, who according to the 2006 Canadian Census numbered 1,172,790, 3.8% of the country's total population, the majority of the populace is made up of old world immigrants and their descendents. After the initial period of French and then British colonization, different waves (or peaks) of immigration and settlement of non-aboriginal peoples took place over the course of nearly two centuries and is currently ongoing. Elements of Aboriginal, French, British and more recent immigrant customs, languages and religions have combined to form the culture of Canada and thus a Canadian identity. Canada has also been strongly influenced by that of its linguistic, geographic and economic neighbour, the United States.

The Canadian Citizenship Act of 1946 took effect on 1 January 1947. Prior to that date, Canadians were British subjects and Canada's nationality law closely mirrored that of the United Kingdom. As Canadian independence was obtained incrementally over the course of many years since the formation of the Canadian Confederation in 1867, World War I and World War II in particular gave rise to a desire amongst Canadians to have their country recognized as a fully-fledged sovereign state with a distinct citizenship. Legislation since the mid 20th century represents Canadians' commitment to multilateralism and socioeconomic development.

Origins

Canadians make up 0.5% of the world's total population,²⁰¹⁰ having relied upon immigration for population growth and social development. Approximately 41% of current Canadians are first or second generation immigrants, Statistics Canada projects that, by 2031, nearly one-half of Canadians above the age of 15 will be foreign-born or have one foreign-born parent.

Immigration

The French originally settled New France in present-day Quebec, during the early part of the 17th century. They also settled the Acadian peninsula alongside a smaller number of other European merchants, who collectively became the Acadians. During the 18th and 19th century; immigration westward (to the area known as Rupert's Land) was carried out by French settlers (Coureur des bois) working for the North West Company, and by British (English and Scottish) settlers representing the Hudson's Bay Company. This led to the creation of the Métis, an ethnic group of mixed European and First Nations parentage.

The British conquest of New France was proceeded by small number of Germans and Swedes who settled alongside the Scottish in Port Royal, Nova Scotia, while some Irish immigrated to the Colony of Newfoundland. In the wake of the 1775 invasion of Canada by the newly-formed Continental Army during the American Revolutionary War, approximately 60,000 United Empire Loyalist fled to British North America, a large portion of whom migrated to New Brunswick. After the War of 1812, British (included British army regulars), Scottish and Irish immigration was encouraged throughout Rupert's Land, Upper Canada and Lower Canada.

Between 1815 and 1850 some 800,000 immigrants came to the colonies of British North America, mainly from the British Isles as part of the great migration of Canada. These included some Gaelic-speaking Highland Scots displaced by the Highland Clearances to Nova Scotia. The Irish Potato Famine of the 1840s significantly increased the pace of Irish immigration to Prince Edward Island and the Province of Canada, with over 35,000 distressed individuals landing in Toronto in 1847 and 1848. Beginning in late 1850s, Chinese immigrants into the Colony of Vancouver Island and Colony of British Columbia peaked with the onset of the Fraser Canyon Gold Rush. The Chinese Immigration Act of 1885 eventually placed a head tax on all Chinese immigrants, in hopes of discouraging Chinese immigration after completion of the Canadian Pacific Railway.

The population of Canada has consistently risen, doubling approximately every 40 years, since the establishment of the Canadian Confederation in 1867. From the mid to late 19th century Canada had a policy of assisting immigrants from Europe, including an estimated 100,000 unwanted "Home Children" from Britain. Block settlement communities were established throughout western Canada between the late 19th and early 20th centuries. Some were planned and other were spontaneously created by the settlers themselves. Canada was now receiving a large amount of European immigrants predominately Italians, Germans, Scandinavians, Dutch and Ukrainians.

Legislative restrictions on immigration (such as the Continuous journey regulation and Chinese Immigration Act) that had favoured British and other European immigrants were amended in the 1960s, opening the doors to immigrants from all parts of the world. While the 1950s had still seen high levels of immigration by Europeans, by the 1970s immigrants increasingly were Chinese, Indian, Vietnamese, Jamaican and Haitian. During the late 1960s and early 1970s, Canada received many American Vietnam War draft dissenters. Throughout the late 1980s and 1990s Canada's growing Pacific trade brought with it a large influx of South Asians, that tended to settle in British Columbia.

In 2009, Canada received 252,179 immigrants - the top ten source countries were China (29,049), the Philippines (27,277), India (26,122), the United States (9,723), the United Kingdom (9,566), France (7,300), Pakistan (6,214), Iran (6,065), South Korea (5,864), and Morocco (5,222). These countries were followed closely by Algeria (4,785), United Arab Emirates (4,640), and Iraq (4,567) with Sri Lanka, Colombia, and Germany each contributing over 4,000 immigrants.

The majority of illegal immigrants come from the southern provinces of the People's Republic of China, with Asia as a whole, Eastern Europe, Caribbean, Africa and the Middle East all contributing to the illegal population. Estimates of illegal immigrants range between 35,000 and 120,000. A 2008 report by the Auditor General of Canada Sheila Fraser, stated that Canada has lost track of approximately 41,000 illegal immigrants whose visas have expired.

Citizenship

in Ottawa, 3 January 1947]] Canadian citizenship is typically obtained by birth in Canada, birth abroad when at least one parent is a Canadian citizen and was born in Canada, or by adoption abroad by at least one Canadian citizen. It can also be granted to a permanent resident who lives in Canada for three out of four years and meets specific requirements. The Immigration and Refugee Protection Act, was passed by the Parliament of Canada in 2001 as Bill C-11, which replaced the Immigration Act of 1976 as the primary federal legislation regulating immigration. Prior to the conferring of legal status on Canadian citizenship, Canada's naturalization laws consisted of a multitude of Acts beginning with the Immigration Act of 1910.

According to Citizenship and Immigration Canada there are three main classifications for immigrants: Family class (closely related persons of Canadian residents), Economic class (admitted on the basis of a point system that account for age, health and labour-market skills required for cost effectively inducting the immigrants into Canada's labour market) and Refugee class (those seeking protection by applying to remain in the country by way of the Canadian immigration and refugee law). In 2008, there were 65,567 immigrants in the family class, 21,860 refugees, and 149,072 economic immigrants amongst the 247,243 total immigrants to the country. Canada resettles over one in 10 of the world’s refugees and has one of the highest per-capita immigration rates in the world, driven by economic policy and family reunification, and is aiming for between 240,000 and 265,000 "new permanent residents" in 2011.

The majority of Canadian citizens live in Canada; however, there are approximately 2,800,000 Canadians abroad as of November 1, 2009. This represents about 7.5% of the total Canadian population. Of those abroad the United States, Hong Kong, the United Kingdom, Taiwan, China, and Lebanon have the largest Canadian diaspora. Canadians in United States are the greatest single expatriate community at over 1 million in 2009, representing 35.8% of all Canadians abroad. Under current Canadian law, Canada does not restrict dual citizenship but Passport Canada encourages its citizens to travel abroad on their Canadian passport, so they can access Canadian consular services .

Ethnic ancestry

Canada has thirty four ethnic groups with at least one hundred thousand members each, of which eleven have over 1,000,000 people and numerous others are represented in smaller amounts. followed by English (21%), French (15.8%), Scottish (15.1%), Irish (13.9%), German (10.2%), Italian (4.6%), Chinese (4.3%), North American Indian (4.0%), In the 2006 census, over five million Canadians identified themselves as a member of a visible minority. Together, they make up 16.2% of the total population: most numerous among these are South Asian (4.0%), Black (2.5%), and Filipino (1.1%). and is the definition that Statistics Canada also uses. {| class="wikitable sortable" style="margin:left" |- ! Ethnic origin ! % ! Population ! Area of largest proportion |- | Canadian | 4.01% | style="text-align:right;"| | style="text-align:left;"| Northwest Territories (36.5%) |- | Ukrainian Canadian | 3.87% | style="text-align:right;"| | style="text-align:left;"| Manitoba (14.8%) |- | Dutch Canadian(Netherlands) | 3.32% | style="text-align:right;"| | style="text-align:left;"| Alberta (5.3%) |- | Polish Canadian | 3.15% | style="text-align:right;"| | style="text-align:left;"| Manitoba (7.3%) |- | East Indian Canadian | 3.08% | style="text-align:right;"| | style="text-align:left;"| British Columbia (5.7%) |- | Russian Canadian | 1.60% | style="text-align:right;"| | style="text-align:left;"| Manitoba (4.3%) |- | Welsh Canadian | 1.41% | style="text-align:right;"| | style="text-align:left;"| Yukon (3.1%) |- | Filipino Canadian | 1.40% | style="text-align:right;"| | style="text-align:left;"| Manitoba (3.5%) |- | Norwegian Canadian | 1.38% | style="text-align:right;"| | style="text-align:left;"| Saskatchewan (7.2%) |- | Portuguese Canadian | 1.32% | style="text-align:right;"| | style="text-align:left;"| Ontario (2.4%) |- | Métis | 1.31% | style="text-align:right;"| | style="text-align:left;"| Northwest Territories (6.9%) |- | British Canadian(British Isles not included elsewhere) | 1.29% | style="text-align:right;"| | style="text-align:left;"| Yukon (2.3%) |- | Swedish Canadian | 1.07% | style="text-align:right;"| | style="text-align:left;"| Saskatchewan (3.5%) |- | Spanish Canadian | 1.04% |align="right"| | style="text-align:left;"| British Columbia (1.3%) |- | American Canadian | 1.01% |align="right"| | style="text-align:left;"| Yukon (2.0%) |- | Hungarian Canadian(Magyar) | 1.01% | style="text-align:right;"| | style="text-align:left;"| Saskatchewan (2.9%) |- | Jewish Canadian(From all continents) | 1.01% | style="text-align:right;"| | style="text-align:left;"| Ontario (1.5%) |} ::::For a complete list see: Canadian ethnic groups

Culture

Canada's culture, like that of most any country in the world, is a product of its language(s), religion(s), political and legal system(s). Being a settler nation, Canada has been shaped by waves of migration that have combined to form a unique blend of art, cuisine, literature, humour and music. Today, Canada has a diverse makeup of nationalities and constitutional protection for policies that promote multiculturalism rather than cultural assimilation or a single national myth. In Quebec, cultural identity is strong, and many French-speaking commentators speak of a Quebec culture as distinguished from English Canadian culture. However as a whole Canada is a cultural mosaic a collection of several regional, aboriginal, and ethnic subcultures.

Canadian Government policies such as; publicly-funded health care, higher and more progressive taxation, outlawing capital punishment, strong efforts to eliminate poverty, an emphasis on multiculturalism, imposing strict gun control, leniency in regard to drug use and most recently legalizing same-sex marriage - are social indicators of how Canada's political and cultural evolution differ from that of the United States. American media and entertainment are popular, if not dominant, in English Canada; conversely, many Canadian cultural products and entertainers are successful in the United States and worldwide. The Government of Canada has also influenced culture with programs, laws and institutions. It has created "crown corporations" to promote Canadian culture through media and has also tried to protect Canadian culture by setting legal minimums on Canadian content.

Canadian culture has historically been influenced by Aboriginal, French and British cultures and traditions. Most of Canada's territory was inhabited and developed later than other European colonies in the Americas, with the result that themes and symbols of pioneers, trappers, and traders were important in the early development of the Canadian identity. First Nations played a critical part in the development of European colonies in Canada, particularly for their role in assisting exploration of the continent during the North American fur trade. The British conquest of New France in the mid 1700s brought a large Francophone population under British Imperial rule, creating a need for compromise and accommodation. The new British rulers left alone much of the religious, political, and social culture of the French-speaking habitants, guaranteeing the right of the Canadiens to practice the Catholic faith and to the use of French civil law (now Quebec law) through the Quebec Act of 1774.

. Four identical sculptures are located in Buffalo City, Changchun, Sarajevo and Sydney.]]

The Constitution Act of 1867 was designed to meet the growing calls of Canadians for autonomy from British rule, while avoiding the overly-strong decentralization that contributed to the Civil War in the United States. The compromises made by the Fathers of Confederation set Canadians on a path to bilingualism, and this in turn contributed to an acceptance of diversity that later led to both multiculturalism and the recognition of Aboriginal contributions to Canadian society. Through their art and culture, First Nations, Inuit and Métis continue to exert influence on Canadian identity. however in 1917 and 1944 conscription crisis's caused a considerable rift along ethnic lines between Anglophones and Francophones. As a result of the First and Second World Wars, the Government of Canada became more assertive and less deferential to British authority. With the gradual loosening of political ties to the United Kingdom and the modernization of Canadian immigration policies, in the 20th century immigrants with African, Caribbean and Asian nationalities have added to the Canadian identity and its culture. The multiple origins immigration pattern continues today with the arrival of large numbers of immigrants from non British or French backgrounds.

Multiculturalism in Canada was adopted as the official policy of the government during the premiership of Pierre Elliot Trudeau in the 1970s and 1980s. The Canadian government has often been described as the instigator of multicultural ideology because of its public emphasis on the social importance of immigration. Multiculturalism is administered by the Department of Canadian Heritage and reflected in the law through the Canadian Multiculturalism Act and section 27 of the Canadian Charter of Rights and Freedoms. In parts of Canada, especially the major urban areas, multiculturalism itself is the cultural norm and diversity is a force that unites the community.

In a 2002 interview with the Globe and Mail, Karīm al-Hussainī the 49th Aga Khan of the Ismaili Muslims described Canada as "the most successful pluralist society on the face of our globe", citing it as "a model for the world." He explained that the experience of Canadian governance - its commitment to pluralism and its support for the rich multicultural diversity of its peoples - is something that must be shared and would be of benefit to all societies in other parts of the world. The preamble to the Canadian Charter of Rights and Freedoms references "God", and the monarch carries the title of "Defender of the Faith". However Canada has no official religion and support for religious pluralism (Freedom of religion in Canada) is an important part of Canada's political culture. With Christianity on the decline, having once been central and integral to Canadian culture and daily life; it has been recently suggested that Canada has come to enter a post-Christian period in a secular state, where the practice of religion has "moved to the margins of public life", with irreligion in Canada on the rise.

The 2001 Canadian census reported that 77.1% of Canadians identify as being Christians; of this, Catholics make up the largest group (43.6%). The largest Protestant denomination is the United Church of Canada (9.5%), followed by the Anglicans (6.8%), Baptists (2.4%), Lutherans (2%), and other Christians (4.4%). The French were first Europeans to settle in great numbers along the shores of the Saint Lawrence River, specifically Latin rite Roman Catholics, including a large number of Jesuits dedicated to converting Aboriginals; an effort that eventually proved successful. The first large Protestant communities were formed in the Maritimes after the British conquest of New France, followed by American Protestant settlers displaced by the American Revolution. The late nineteenth century saw the beginning of a large shift in Canadian immigration patterns. Large numbers of Irish and Southern Europeans immigrants were creating new Roman Catholic communities in English Canada. The settlement of the west brought significant Eastern Orthodox immigrants from Eastern Europe and Mormon and Pentecostal immigrants from the United States.

The earliest documentation of Jews in Canada are the 1754 British Army records from the French and Indian War. The Islamic, Sikhism and Buddhism communities although small, are as old as the nation itself. The 1871 Canadian Census (first "Canadian" national census) indicated thirteen Muslims among the populace, with approximately 5000 Sikh by 1908. The first Canadian mosque was constructed in Edmonton in 1938, when there were approximately 700 Muslims in Canada. Buddhism first arrived in Canada when Japanese immigrated during the late 19th century. The first Japanese Buddhist temple in Canada was built in Vancouver in 1905. The influx of immigrants in the late 20th century with Sri Lankan, Japanese, Indian and Southeast Asian customs, has contributed to the recent expansion of the Sikhism and Buddhist communities.

Languages

A multitude of languages are used by Canadians, with English and French (the official languages) being the mother tongues of 59.7% and 23.2% of the population respectively. Approximately twenty percent or over six million people in Canada list a non-official language as their mother tongue. Some of the most common first languages include: Chinese (3.1%), Italian (1.4%), German (1.2%), Spanish (1.2%), Punjabi (1.1%), Tagalog (0.9%), Tamil (0.8%), Gujarati (0.6%). Less than one percent of Canadians (just over 250,000 individuals) know how to speak an aboriginal language. About half this number (129,865) reported using an aboriginal language on a daily basis.

English and French are recognized by the Constitution of Canada as official languages. Thus all federal government laws are enacted in both English and French with government services available in both languages. In the Northwest Territories, the Official Languages Act declares that there are eleven different languages: Chipewyan, Cree, English, French, Gwich’in, Inuinnaqtun, Inuktitut, Inuvialuktun, North Slavey, South Slavey and Tłįchǫ. Canadian media offers specialty television channels, newspapers and other publications in many minority languages, that are widely accessible across the county.

In Canada as elsewhere in the world of European colonization, the frontier of European exploration and settlement tended to be a linguistically diverse and fluid place, as cultures using different languages met and interacted. The need for a common means of communication between the indigenous inhabitants and new arrivals for the purposes of trade and (in some cases) intermarriage led to the development of hybrid languages. Languages like Michif, Chinook Jargon and Bungi creole tended to be highly localized and were often spoken by only a small number of individuals who were frequently capable of speaking another language.

See also

Demographics of Canada

List of Canadians

Orders, decorations, and medals of Canada - complex system by which Canadians are honoured

Persons of National Historic Significance

Notes

References

Further reading

External links

Canada Year Book 2010 - Statistics Canada

Canada: A People's History - Teacher Resources - Canadian Broadcasting Corporation

How Canadians Govern Themselves - Parliament of Canada

Persons of National Historic Significance in Canada - Parks Canada

Multicultural Canada - Department of Canadian Heritage

The Canadian Immigrant Experience - Library and Archives Canada

The Dictionary of Canadian Biography – Library and Archives Canada

Canadiana: The National Bibliography of Canada – Library and Archives Canada

* Category:Article Feedback Pilot