A programmable logic controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non-volatile memory. A PLC is an example of a ''hard'' real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.

History

The PLC was invented in response to the needs of the American automotive manufacturing industry. Programmable logic controllers were initially adopted by the automotive industry where software revision replaced the re-wiring of hard-wired control panels when production models changed.

Before the PLC, control, sequencing, and safety interlock logic for manufacturing automobiles was accomplished using hundreds or thousands of relays, cam timers, and drum sequencers and dedicated closed-loop controllers. The process for updating such facilities for the yearly model change-over was very time consuming and expensive, as electricians needed to individually rewire each and every relay.

Digital computers, being general-purpose programmable devices, were soon applied to control of industrial processes. Early computers required specialist programmers, and stringent operating environmental control for temperature, cleanliness, and power quality. Using a general-purpose computer for process control required protecting the computer from the plant floor conditions. An industrial control computer would have several attributes: it would tolerate the shop-floor environment, it would support discrete (bit-form) input and output in an easily extensible manner, it would not require years of training to use, and it would permit its operation to be monitored. The response time of any computer system must be fast enough to be useful for control; the required speed varying according to the nature of the process.

In 1968 GM Hydramatic (the automatic transmission division of General Motors) issued a request for proposal for an electronic replacement for hard-wired relay systems. The winning proposal came from Bedford Associates of Bedford, Massachusetts. The first PLC, designated the 084 because it was Bedford Associates' eighty-fourth project, was the result. Bedford Associates started a new company dedicated to developing, manufacturing, selling, and servicing this new product: Modicon, which stood for MOdular DIgital CONtroller. One of the people who worked on that project was Dick Morley, who is considered to be the "father" of the PLC. The Modicon brand was sold in 1977 to Gould Electronics, and later acquired by German Company AEG and then by French Schneider Electric, the current owner.

One of the very first 084 models built is now on display at Modicon's headquarters in North Andover, Massachusetts. It was presented to Modicon by GM, when the unit was retired after nearly twenty years of uninterrupted service. Modicon used the 84 moniker at the end of its product range until the 984 made its appearance.

The automotive industry is still one of the largest users of PLCs.

Development

Early PLCs were designed to replace relay logic systems. These PLCs were programmed in "ladder logic", which strongly resembles a schematic diagram of relay logic. This program notation was chosen to reduce training demands for the existing technicians. Other early PLCs used a form of instruction list programming, based on a stack-based logic solver.

Modern PLCs can be programmed in a variety of ways, from ladder logic to more traditional programming languages such as BASIC and C. Another method is State Logic, a very high-level programming language designed to program PLCs based on state transition diagrams.

Many early PLCs did not have accompanying programming terminals that were capable of graphical representation of the logic, and so the logic was instead represented as a series of logic expressions in some version of Boolean format, similar to Boolean algebra. As programming terminals evolved, it became more common for ladder logic to be used, for the aforementioned reasons and because it was a familiar format used for electromechanical control panels. Newer formats such as State Logic and Function Block (which is similar to the way logic is depicted when using digital integrated logic circuits) exist, but they are still not as popular as ladder logic. A primary reason for this is that PLCs solve the logic in a predictable and repeating sequence, and ladder logic allows the programmer (the person writing the logic) to see any issues with the timing of the logic sequence more easily than would be possible in other formats.

Programming

Early PLCs, up to the mid-1980s, were programmed using proprietary programming panels or special-purpose programming terminals, which often had dedicated function keys representing the various logical elements of PLC programs. Programs were stored on cassette tape cartridges. Facilities for printing and documentation were very minimal due to lack of memory capacity. The very oldest PLCs used non-volatile magnetic core memory.

More recently, PLCs are programmed using application software on personal computers. The computer is connected to the PLC through Ethernet, RS-232, RS-485 or RS-422 cabling. The programming software allows entry and editing of the ladder-style logic. Generally the software provides functions for debugging and troubleshooting the PLC software, for example, by highlighting portions of the logic to show current status during operation or via simulation. The software will upload and download the PLC program, for backup and restoration purposes. In some models of programmable controller, the program is transferred from a personal computer to the PLC though a programming board which writes the program into a removable chip such as an EEPROM or EPROM.

Functionality

The functionality of the PLC has evolved over the years to include sequential relay control, motion control, process control, distributed control systems and networking. The data handling, storage, processing power and communication capabilities of some modern PLCs are approximately equivalent to desktop computers. PLC-like programming combined with remote I/O hardware, allow a general-purpose desktop computer to overlap some PLCs in certain applications. Regarding the practicality of these desktop computer based logic controllers, it is important to note that they have not been generally accepted in heavy industry because the desktop computers run on less stable operating systems than do PLCs, and because the desktop computer hardware is typically not designed to the same levels of tolerance to temperature, humidity, vibration, and longevity as the processors used in PLCs. In addition to the hardware limitations of desktop based logic, operating systems such as Windows do not lend themselves to deterministic logic execution, with the result that the logic may not always respond to changes in logic state or input status with the extreme consistency in timing as is expected from PLCs. Still, such desktop logic applications find use in less critical situations, such as laboratory automation and use in small facilities where the application is less demanding and critical, because they are generally much less expensive than PLCs.

In more recent years, small products called PLRs (programmable logic relays), and also by similar names, have become more common and accepted. These are very much like PLCs, and are used in light industry where only a few points of I/O (i.e. a few signals coming in from the real world and a few going out) are involved, and low cost is desired. These small devices are typically made in a common physical size and shape by several manufacturers, and branded by the makers of larger PLCs to fill out their low end product range. Popular names include PICO Controller, NANO PLC, and other names implying very small controllers. Most of these have between 8 and 12 digital inputs, 4 and 8 digital outputs, and up to 2 analog inputs. Size is usually about 4" wide, 3" high, and 3" deep. Most such devices include a tiny postage stamp sized LCD screen for viewing simplified ladder logic (only a very small portion of the program being visible at a given time) and status of I/O points, and typically these screens are accompanied by a 4-way rocker push-button plus four more separate push-buttons, similar to the key buttons on a VCR remote control, and used to navigate and edit the logic. Most have a small plug for connecting via RS-232 or RS-485 to a personal computer so that programmers can use simple Windows applications for programming instead of being forced to use the tiny LCD and push-button set for this purpose. Unlike regular PLCs that are usually modular and greatly expandable, the PLRs are usually not modular or expandable, but their price can be two orders of magnitude less than a PLC and they still offer robust design and deterministic execution of the logic.

PLC topics

Features

The main difference from other computers is that PLCs are armored for severe conditions (such as dust, moisture, heat, cold) and have the facility for extensive input/output (I/O) arrangements. These connect the PLC to sensors and actuators. PLCs read limit switches, analog process variables (such as temperature and pressure), and the positions of complex positioning systems. Some use machine vision. On the actuator side, PLCs operate electric motors, pneumatic or hydraulic cylinders, magnetic relays, solenoids, or analog outputs. The input/output arrangements may be built into a simple PLC, or the PLC may have external I/O modules attached to a computer network that plugs into the PLC.

Scan time

A PLC program is generally executed repeatedly as long as the controlled system is running. The status of physical input points is copied to an area of memory accessible to the processor, sometimes called the "I/O Image Table". The program is then run from its first instruction run down to the last rung. It takes some time for the processor of the PLC to evaluate all the ladders and update the I/O image table with the status of outputs. This scan time may be a few milliseconds for a small program or on a fast processor, but older PLCs running very large programs could take much longer (say, up to 100 ms) to execute the program. If the scan time was too long, the response of the PLC to process conditions would be too slow to be useful.

As PLCs became more advanced, methods were developed to change the sequence of ladder execution, and subroutines were implemented. This simplified programming and could also be used to save scan time for high-speed processes; parts of the program used, for example, only for setting up the machine could be segregated from those parts required to operate at higher speed.

Special-purpose I/O modules, such as timer modules or counter modules, could be used where the scan time of the processor was too long to reliably pick up, for example, counting pulses from a shaft encoder. The relatively slow PLC could still interpret the counted values to control a machine, but the accumulation of pulses was done by a dedicated module that was unaffected by the speed of the program execution.

System scale

A small PLC will have a fixed number of connections built in for inputs and outputs. Typically, expansions are available if the base model has insufficient I/O.

Modular PLCs have a chassis (also called a rack) into which are placed modules with different functions. The processor and selection of I/O modules is customised for the particular application. Several racks can be administered by a single processor, and may have thousands of inputs and outputs. A special high speed serial I/O link is used so that racks can be distributed away from the processor, reducing the wiring costs for large plants.

User interface

PLCs may need to interact with people for the purpose of configuration, alarm reporting or everyday control. A human-machine interface (HMI) is employed for this purpose. HMIs are also referred to as man-machine interfaces (MMIs) and graphical user interface (GUIs). A simple system may use buttons and lights to interact with the user. Text displays are available as well as graphical touch screens. More complex systems use programming and monitoring software installed on a computer, with the PLC connected via a communication interface.

Communications

PLCs have built in communications ports, usually 9-pin RS-232, but optionally EIA-485 or Ethernet. Modbus, BACnet or DF1 is usually included as one of the communications protocols. Other options include various fieldbuses such as DeviceNet or Profibus. Other communications protocols that may be used are listed in the List of automation protocols.

Most modern PLCs can communicate over a network to some other system, such as a computer running a SCADA (Supervisory Control And Data Acquisition) system or web browser.

PLCs used in larger I/O systems may have peer-to-peer (P2P) communication between processors. This allows separate parts of a complex process to have individual control while allowing the subsystems to co-ordinate over the communication link. These communication links are also often used for HMI devices such as keypads or PC-type workstations.

Programming

PLC programs are typically written in a special application on a personal computer, then downloaded by a direct-connection cable or over a network to the PLC. The program is stored in the PLC either in battery-backed-up RAM or some other non-volatile flash memory. Often, a single PLC can be programmed to replace thousands of relays.

Under the IEC 61131-3 standard, PLCs can be programmed using standards-based programming languages. A graphical programming notation called Sequential Function Charts is available on certain programmable controllers. Initially most PLCs utilized Ladder Logic Diagram Programming, a model which emulated electromechanical control panel devices (such as the contact and coils of relays) which PLCs replaced. This model remains common today.

IEC 61131-3 currently defines five programming languages for programmable control systems: function block diagram (FBD), ladder diagram (LD), structured text (ST; similar to the Pascal programming language), instruction list (IL; similar to assembly language) and sequential function chart (SFC). These techniques emphasize logical organization of operations.

While the fundamental concepts of PLC programming are common to all manufacturers, differences in I/O addressing, memory organization and instruction sets mean that PLC programs are never perfectly interchangeable between different makers. Even within the same product line of a single manufacturer, different models may not be directly compatible.

PLC compared with other control systems

PLCs are well-adapted to a range of automation tasks. These are typically industrial processes in manufacturing where the cost of developing and maintaining the automation system is high relative to the total cost of the automation, and where changes to the system would be expected during its operational life. PLCs contain input and output devices compatible with industrial pilot devices and controls; little electrical design is required, and the design problem centers on expressing the desired sequence of operations. PLC applications are typically highly customized systems so the cost of a packaged PLC is low compared to the cost of a specific custom-built controller design. On the other hand, in the case of mass-produced goods, customized control systems are economic due to the lower cost of the components, which can be optimally chosen instead of a "generic" solution, and where the non-recurring engineering charges are spread over thousands or millions of units.

For high volume or very simple fixed automation tasks, different techniques are used. For example, a consumer dishwasher would be controlled by an electromechanical cam timer costing only a few dollars in production quantities.

A microcontroller-based design would be appropriate where hundreds or thousands of units will be produced and so the development cost (design of power supplies, input/output hardware and necessary testing and certification) can be spread over many sales, and where the end-user would not need to alter the control. Automotive applications are an example; millions of units are built each year, and very few end-users alter the programming of these controllers. However, some specialty vehicles such as transit busses economically use PLCs instead of custom-designed controls, because the volumes are low and the development cost would be uneconomic.

Very complex process control, such as used in the chemical industry, may require algorithms and performance beyond the capability of even high-performance PLCs. Very high-speed or precision controls may also require customized solutions; for example, aircraft flight controls. Single-board computers using semi-customized or fully proprietary hardware may be chosen for very demanding control applications where the high development and maintenance cost can be supported. "Soft PLCs" running on desktop-type computers can interface with industrial I/O hardware while executing programs within a version of commercial operating systems adapted for process control needs.

Programmable controllers are widely used in motion control, positioning control and torque control. Some manufacturers produce motion control units to be integrated with PLC so that G-code (involving a CNC machine) can be used to instruct machine movements.

PLCs may include logic for single-variable feedback analog control loop, a "proportional, integral, derivative" or "PID controller". A PID loop could be used to control the temperature of a manufacturing process, for example. Historically PLCs were usually configured with only a few analog control loops; where processes required hundreds or thousands of loops, a distributed control system (DCS) would instead be used. As PLCs have become more powerful, the boundary between DCS and PLC applications has become less distinct.

PLCs have similar functionality as Remote Terminal Units. An RTU, however, usually does not support control algorithms or control loops. As hardware rapidly becomes more powerful and cheaper, RTUs, PLCs and DCSs are increasingly beginning to overlap in responsibilities, and many vendors sell RTUs with PLC-like features and vice versa. The industry has standardized on the IEC 61131-3 functional block language for creating programs to run on RTUs and PLCs, although nearly all vendors also offer proprietary alternatives and associated development environments.

In recent years "Safety" PLCs have started to become popular, either as standalone models (Pilz PNOZ Multi, Sick etc) or as functionality and safety-rated hardware added to existing controller architectures (Allen Bradley Guardlogix, Siemens F-series etc). These differ from conventional PLC types as being suitable for use in safety-critical applications for which PLCs have traditionally been supplemented with hard-wired safety relays. For example, a Safety PLC might be used to control access to a robot cell with trapped-key access, or perhaps to manage the shutdown response to an emergency stop on a conveyor production line. Such PLCs typically have a restricted regular instruction set augmented with safety-specific instructions designed to interface to emergency stops, light screens and so forth. The flexibility that such systems offer has resulted in rapid growth of demand for these controllers.

Digital and analog signals

Digital or discrete signals behave as binary switches, yielding simply an On or Off signal (1 or 0, True or False, respectively). Push buttons, limit switches, and photoelectric sensors are examples of devices providing a discrete signal. Discrete signals are sent using either voltage or current, where a specific range is designated as ''On'' and another as ''Off''. For example, a PLC might use 24 V DC I/O, with values above 22 V DC representing ''On'', values below 2VDC representing ''Off'', and intermediate values undefined. Initially, PLCs had only discrete I/O.

Analog signals are like volume controls, with a range of values between zero and full-scale. These are typically interpreted as integer values (counts) by the PLC, with various ranges of accuracy depending on the device and the number of bits available to store the data. As PLCs typically use 16-bit signed binary processors, the integer values are limited between -32,768 and +32,767. Pressure, temperature, flow, and weight are often represented by analog signals. Analog signals can use voltage or current with a magnitude proportional to the value of the process signal. For example, an analog 0 - 10 V input or 4-20 mA would be converted into an integer value of 0 - 32767.

Current inputs are less sensitive to electrical noise (i.e. from welders or electric motor starts) than voltage inputs.

Example

As an example, say a facility needs to store water in a tank. The water is drawn from the tank by another system, as needed, and our example system must manage the water level in the tank.

Using only digital signals, the PLC has two digital inputs from float switches (Low Level and High Level). When the water level is above the switch it closes a contact and passes a signal to an input. The PLC uses a digital output to open and close the inlet valve into the tank.

When the water level drops enough so that the Low Level float switch is off (down), the PLC will open the valve to let more water in. Once the water level rises enough so that the High Level switch is on (up), the PLC will shut the inlet to stop the water from overflowing. This rung is an example of seal-in (latching) logic. The output is sealed in until some condition breaks the circuit.

|                                                             |
|   Low Level      High Level                 Fill Valve      |
|------------|----------------------------(OUT)---------|
|               |                                             |
|               |                                             |
|               |                                             |
|   Fill Valve  |                                             |
|------[ ]------|                                             |
|                                                             |
|                                                             |

An analog system might use a water pressure sensor or a load cell, and an adjustable (throttled) control (e.g. by a valve) of the fill of the tank.

In this system, to avoid 'flutter' adjustments that can wear out the valve, many PLCs incorporate "hysteresis" which essentially creates a "deadband" of activity. A technician adjusts this deadband so the valve moves only for a significant change in rate. This will in turn minimize the motion of the valve, and reduce its wear.

A real system might combine both approaches, using float switches and simple valves to prevent spills, and a rate sensor and rate valve to optimize refill rates and prevent water hammer. Backup and maintenance methods can make a real system very complicated.

See also

Distributed control system

Industrial control systems

Industrial safety systems

Programmable automation controller

References

Further reading

Daniel Kandray, ''Programmable Automation Technologies'', Industrial Press, 2010 ISBN 978-0-8311-3346-7, Chapter 8 ''Introduction to Programmable Logic Controllers''

External links

Category:Automation Category:Industrial computing

ar:جهاز تحكم منطقي قابل للبرمجة az:Yaddaşı proqramlaşdırılabilən idarəetmə ca:Autòmat Programable Industrial cs:Programovatelný logický automat da:Programmable logic controller de:Speicherprogrammierbare Steuerung et:Programmeeritav loogikakontroller es:Controlador lógico programable eu:PLC fa:پی‌ال‌سی fr:Automate programmable industriel ko:프로그래머블 로직 컨트롤러 hi:प्रोग्रैमेबल लाजिक कंट्रोलर id:Kontrol logika terprogram it:Controllore logico programmabile he:בקר לוגי מיתכנת hu:Programmable logic controller mk:PLC управувач ms:Pengawal logik boleh atur cara my:ပီအယ်လ်စီ nl:Programmable logic controller ja:プログラマブルロジックコントローラ no:Programmerbar logisk styring nn:PLS pl:Sterownik PLC pt:Controlador lógico programável ro:PLC ru:Программируемый логический контроллер sq:PLC sr:Programabilni logički kontroler fi:Ohjelmoitava logiikka sv:Programmerbart styrsystem ta:நிரலேற்பு தருக்கக் கட்டுப்படுத்தி tr:PLC uk:Програмований логічний контролер vi:PLC zh:可编程序控制器

Coordinates	12°2′36″N77°1′42″N
name	The Basics
background	group_or_band
origin	Melbourne, Australia
genre	Rock
years active	2002 – (present)
label	Independent, Albert Records
associated acts	Gotye, Down Hills Home, Dog With Wheels, Blood Red Bird
website	The Basics Official Website
current members	Wally De BackerTim HeathKris Schroeder
past members	Michael Hubbard
notable instruments	Lead guitar, drums, bass guitar. }}

The Basics ( ) are a three-piece band from Melbourne, Australia, formed by Wally De Backer and Kris Schroeder in 2002. Their style has been described as anything from 'indie-pop' to 'rock'n'roll' to 'pop-rock', though their records show them span a wide range of genres including reggae, ska, country, and electro-pop. They are "recognised as one of Australia's hardest-working bands".

With close to 1000 shows in their nine-year career, their live performances are well-known for their sense of humour and energy.

Formation

The Basics were formed after Kris met Wally at a party in Melbourne. The event was to see off the young aspiring producer, who was about to depart for Los Angeles, and together with a number of musician friends, the two jammed on some blues-rock standards. Later that night, they bonded over a mutual love of The Beatles, 70s & 80s cartoon theme songs and old Sierra adventure games.

Initially they played around Melbourne as an acoustic guitar/drums combo, starting at The Opposition in Frankston and the House of Fools in Footscray, where in late 2002 they met and later invited Michael Hubbard to join them on electric guitar. Though lacking any real experience with the instrument, Kris willingly purchased his first bass guitar and the trio was born. During this time the group start performing songs with more complicated three-part harmony.

During late 2002 and early 2003 The Basics recorded and released an album called ''Get Back'' through MGM Distribution. They began what was to become regular tours of the East and West coasts of Australia.

2004-2005: Current lineup

Tim Heath joined the group in June 2004, after Michael decided to pursue his solo career, which has included being one half of Down Hills Home. Tim was reportedly the only person to reply to an advertisement in Melbourne's Beat Magazine looking for a new guitarist. Tim apparently answered the advertisement - which said the applicant "must have a love of 50s and 60s rock'n'roll" - thinking that he would be meeting "a couple of old guys to play with on the weekends over some beers". They soon recorded ''For Girls Like You''.

The Basics in 2005 continued to tour and play small festivals, and after releasing ''For Girls Like You'' through MGM Distribution they departed for a national tour of Australia, which lasted for two months and took them to every Australian state and territory. Stuart Padbury, a young Melbourne sound engineer, joined them on much of this tour. On returning, the band began demoing songs for a new album.

2006-2009: Touring and soundtracks

In 2006, The Basics began recording what is to become known as ''Stand Out/Fit In''. This took several months and was not completed until the end of the year, despite intentions to have it released in June. Instead, they held a successful 'album preview' where each of the tracks was demonstrated in 'rough form' accompanied by a music video for each (produced by Melbourne photographic artist James Bryans). The band also talked about the origins of the songs. This event brought a lot of attention to the band for the idea's originality. They pre-released a radio single 'Just Hold On' from the album. The band were invited to play the hugely popular Homebake Festival in Sydney, where they received a great response ("one of the highlights" wrote ''The Daily Telegraph'').

In 2007, the band departed on a tri-state residency which saw them play Melbourne, Sydney and Brisbane every week for the month of April - a bold move which brought further attention to the band for its original idea. Riding on the wave of this tour, Schroeder, De Backer and Heath departed on their first overseas tour which saw them performing 26 shows around Japan, Norway and the United Kingdom. They also toured twice more up the East Coast, one of which was with popular Japanese band The Bawdies. Their song 'Rattle My Chain' was used in a series of commercials for Volvo Australia. The song 'Hey There!' featured in the British film ''The Bank Job'' - starring Jason Statham - and was used as the backing for a February 2007 short film directed by Tim Longhurst called The Rip. Their song 'Better' was featured in a surfing documentary about the invention of the shortboard in 1967.

In 2008, the band appeared on Australia's Channel 9 for Australia Day celebrations, performing two of their songs - 'Just Hold On' and 'Hey There!' - to an estimated audience of 2 million. Securing an Australian Government grant, they embarked on a two-month tour of Australia, specifically targeting "culturally underprivileged groups" in rural and regional schoolchildren and Indigenous communities. The programme had them holding masterclasses and performing alongside Indigenous groups in the remote Northern Territory and Queensland. Their initiative also had them raising money for the charity Lifeline, their contribution to which was recognised with a plaque at the end of the tour. Season two of ''Californication'' starring David Duchovny featured their cover of the classic 'Have Love, Will Travel', most famously covered by 'The Sonics'.

In 2009, The Basics for the first time enjoyed the support of Australian radio network Triple J, which had reportedly snubbed the band's previous material. The singles 'With This Ship' and 'Like A Brother' were added to the station's playlist, and momentum carried The Basics overseas for a second tour of the United Kingdom and Norway, and also a series of shows in Dublin, Ireland. They were joined by the longtime front-of-house engineer Stuart Padbury who had been mixing them since 2005. The band was often seen in the Grafton Street Mall in Dublin busking to promote their concerts there. Their second show in Oslo, Norway saw the band perform with Hot Tub, one of the members of the Norwegian boy band "Boyzvoice", in his first performance for several years. Season Eight of ''Scrubs'' featured the song 'Lookin' Over My Shoulder'.

Despite all this promise, the band's album ''Keep Your Friends Close'' - produced and part-recorded by Peter Cobbin at London's Abbey Road Studios - though enjoying many favourable reviews, failed to impress Richard Kingsmill, music director of Triple J. This effectively ended the band's apparent upward spiral and the resulting album launch tour was reportedly "trying".

2010: Hiatus and live album

In 2010, following the band's fourth stint at the Tamworth Country Music Festival, and the recording of a yet-unreleased live album, an indefinite hiatus was announced on the band's websites. This was in part due to the impending release of a new album produced by Wally for his Gotye project, and also to reported tensions within the band following the previous year's disappointments.

However, this hiatus was soon broken with a two-month residency at the Northcote Social Club in Melbourne, which saw an apparent return to form. The band's EP "Wait For You" enjoys airplay on Triple J. The Basics also played a one-off show at Sydney's Oxford Art Factory.

On 20 August 2010, The Basics released their fourth LP , available free online and exclusively from *[www.FreeBasicsAlbum.com]. The band had reportedly moved to expand their listenership through this free giveaway, though 300 "Deluxe" CD/Vinyl versions have been printed. was recorded at the Northcote Social Club on 6 February, "in front of a live studio audience", and like the previous record was mixed by Peter Cobbin at Abbey Road Studios. Technically a self-titled album, the phonetics spell out the accurate pronunciation of the band’s name. Kris Schroeder: "For years we’ve worked at bringing our live energy into the studio and thus far it’s been a bit hit-and-miss. Our trick this time was to pull a switcheroo and bring the studio to us instead; the result is the best and closest to us we’ve sounded yet."

Melbourne thespian and Dog With Wheels bassist David Bramble - friends with Heath from university days - has occasionally joined the band on tour, playing keys, often while sporting a large moustache. Other guests have included Jake Mason (saxophone), also of Cookin' on 3 Burners and The Bamboos, Gideon Brazil (saxophone, flute), Simon Imrei (guitar and vocals) and Monty MacKenzie (saxophone).

Covers have often made an appearance from various sources: to date, some of the bands covered have been Cream, The Kinks, The Rolling Stones, The Police, Neil Young, Bob Dylan, New Kids on the Block, Richard Berry, Sonny Curtis and The Crickets, JJ Cale, Harry Nilsson, Bill Scott, Ryan Adams and The Coasters (via The Beatles for their cover of Three Cool Cats).

Members

Kris Schroeder: Bass, Vocals

Wally De Backer: Drums, Vocals

Tim Heath: Guitar, Vocals

Discography

Albums

Get Back (15 January 2004)

Stand Out/Fit In (5 May 2007)

Keep Your Friends Close (25 September 2009)

(20 August 2010)

EP

For Girls Like You (11 July 2005)

Lookin' Over My Shoulder (10 February 2007)

Like A Brother (5 June 2009)

Wait For You (21 May 2010)

Singles

Call It Rhythm & Blues (20 August 2004)

Just Hold On

With This Ship (22 February 2009)

Upcoming projects

The band are taking a two year hiatus, set to return to the stage together in early 2012. Wally De Backer will be launching a new album under his Gotye act in August 2011, Tim Heath will be touring and recording with Blood Red Bird, and Kris Schroeder is currently recording a solo album.

References

External links

Official Website

Myspace Website

Category:Victoria (Australia) musical groups