This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (October 2007)

Mountain biking

Mountain biker riding in the Arizona desert
Highest governing body	International Mountain Bicycling Association
First played	Open to debate. Modern era began in the late 1970s
Characteristics
Mixed gender	Separate men's & women's championship although no restrictions on women competing against men.
Olympic	Since 1996

Mountain biking is a sport which consists of riding bicycles off-road, often over rough terrain, using specially adapted mountain bikes. Mountain bikes share similarities with other bikes, but incorporate features designed to enhance durability and performance in rough terrain.

Mountain biking can generally be broken down into multiple categories: cross country (XC), trail riding, all mountain, downhill, freeride, dirt jumping and trials. The vast majority of mountain biking falls into the recreational XC, and Trail Riding categories.

This individual sport requires endurance, core strength and balance, bike handling skills, and self-reliance. XC type mountain biking generally requires a different range of skills and a higher level of fitness than other types of mountain biking. Advanced riders pursue steep technical descents and, in the case of freeriding, downhilling, and dirt jumping, aerial maneuvers off of specially constructed jumps and ramps.

Mountain biking can be performed almost anywhere from a back yard to a gravel road, but the majority of mountain bikers ride off-road trails, whether country back roads, fire roads, or singletrack (narrow trails that wind through forests, mountains, deserts, or fields). There are aspects of mountain biking that are more similar to trail running than regular bicycling. Because riders are often far from civilization, there is a strong ethic of self-reliance in the sport. Riders learn to repair their broken bikes or flat tires to avoid being stranded miles from help. Many riders will carry a backpack, including a water bladder, containing all the essential tools and equipment for trailside repairs, and many riders also carry emergency supplies in the case of injury miles from outside help. Club rides and other forms of group rides are common, especially on longer treks. A combination sport named mountain bike orienteering adds the skill of map navigation to mountain biking.

History[link]

The history of the mountain bike includes contributions from cyclo-cross in Europe, the Roughstuff Fellowship in the UK, and modified heavy cruiser bicycles used for freewheeling down mountain trails in Marin County, California. However, it was not until the late 1970s and early 1980s that road bicycle companies started to manufacture mountain bicycles using high-tech lightweight materials. Specialized introduced the first major production mountain bike in the world, the Stumpjumper, in 1981.^[1][2] Throughout the 1990s and 2000s, mountain biking moved from a little-known sport to the mainstream.

Equipment[link]

Bike[link]

A hardtail mountain bike.

• Mountain bikes differ from other bikes primarily in that they incorporate features aimed at increasing durability and improving performance in rough terrain. Most modern mountain bikes have front fork or dual suspension, 26 inch and also 29 or 27.5(650b) inch diameter tires, usually from 1.7 to 2.5 inches in width, and a wider, flat or upwardly-rising handlebar that allows a more upright riding position, giving the rider more control. They have a smaller, reinforced frame, usually made of wide tubing. Tires usually have a pronounced lugged tread, and are mounted on rims which are stronger than those used on most non-mountain bicycles. Compared to other bikes, mountain bikes also tend to more frequently use disc brakes. They also tend to have lower ratio gears to facilitate climbing steep hills and traversing obstacles. Pedals vary from simple platform pedals, where the rider simply places the shoes on top of the pedals, to clipless, where the rider uses a specially equipped shoe with a sole that engages mechanically into the pedal. Pedals with toe cages (clips) are rarely used anymore as they take longer to get out of than clipless or platform if one takes a fall on the rough terrain.
  Generally speaking, enhanced durability and off-road capabilities also result in a heavier bicycle weight to rider ratio than road touring bicycles.^[3]

Accessories[link]

• Gloves differ from road touring gloves, are made of heavier construction, and often have covered thumbs or all fingers covered for hand protection. They are sometimes made with padding for the knuckles.
• Glasses with little or no difference from those used in other cycling sports, help protect against debris while on the trail. Filtered lenses, whether yellow for cloudy days or shaded for sunny days, protect the eyes from strain. Downhill and freeride mountain bikers often use goggles similar to motorcross or snowboard goggles in unison with their fullface helmets.
• Shoes generally have gripping soles similar to those of hiking boots for scrambling over un-ridable obstacles, unlike the smooth-bottomed shoes used in road cycling. The shank of mountain bike shoes is generally more flexible than road cycling shoes. Shoes compatible with clipless pedal systems are also frequently used.
• Clothing is chosen for comfort during physical exertion in the backcountry, and its ability to withstand falls. Road touring clothes are often inappropriate due to their delicate fabrics and construction.
• Hydration systems are important for mountain bikers in the backcountry, ranging from simple water bottles to water bags with drinking tubes in lightweight backpacks (e.g., Camelbaks).
• GPS navigation device is sometimes added to the handlebars and is used to display and monitor progress on trails downloaded from the internet or pre-made mapping systems, record trails on the fly, and keep track of trip times and other data. The GPS system is often a handheld GPS device with color screen and rugged, waterproof (IPX7) design.
• Pump to inflate flat tires.
• Bike tools and extra bike tubes are important, as mountain bikers frequently find themselves miles from help, with flat tires or other mechanical problems that must be handled by the rider.
• High-power lights based on LED technology, especially for mountain biking at night.

Protective gear[link]

The style and level of protection worn by individual riders varies greatly and is affected by many factors including terrain, environment, weather, potential obstacles on the trail, experience, technical skill, fitness, perceived risk, desired style and others too numerous to mention. A cross-country helmet and simple long fingered gloves are a good minimum for the majority of riding.

Limb protection becomes important when speeds rise, surfaces become loose and sketchy, terrain technical and crashes more common and more severe. Full-face helmets and armored suits or jackets are more suited to "gravity" and "air"-orientated disciplines which use jumps and drops, where their extra bulk and weight is outweighed by the bigger and more frequent crashes with worse consequences. Still, within XC community, the typical road-racing attire is what most riders use. Whatever protection is used it should fit well, be comfortable (or it won't be worn) on the bike as well as in the shop and suited for the particular type of riding. Gloves can offer increased comfort while riding, by alleviating compression and friction, and protection in the event of strikes to the back or palm of the hand or when putting the hand out in a fall. Gloves also protect the hand, fingers, and knuckles from abrasion on rough surfaces such as concrete. Many different styles of gloves exist, with various fits, sizes, finger lengths, palm padding and armor options available. Armoring knuckles and the backs of hands with plastic panels is common in more extreme types of mountainbiking.

• Helmets provide important head protection. The use of helmets, in one form or another, is almost universal amongst all mountain bikers. The main three types are cross-country, rounded skateboarder style (nicknamed "half shells" or "skate style") and full face. Cross-country helmets tend to be light and well ventilated, and more comfortable to wear for long periods, especially while perspiring in hot weather. In XC competitions, most bikers use the usual road racing style helmets, for their lightweight and aerodynamic qualities. Skateboard helmets are simpler and cheaper than other helmet types; provide greater coverage of the head and resist minor scrapes and knocks. Unlike road biking helmets, skateboard helmets typically have a thicker, hard plastic shell which can take multiple impact before it needs to be replaced. The trade-off for this is that they tend to be much heavier and less ventilated (sweatier), therefore not suitable for endurance-based riding.Full-face helmets (BMX-style) provide the highest level of protection, being stronger again than skateboard style and including a jaw guard to protect the face. The weight is the main issue with this type but nowadays they are often relatively well ventilated and made of high-tech materials, such as carbon fiber. As all helmets should meet minimum standards, SNELL B.95 (American Standard) BS EN 1078:1997 (European Standard), DOT or "motorized ratings" are making their way into the market. The choice of helmet often comes down to rider preference, likelihood of crashing and on what features or properties of a helmet they place emphasis. Helmets are mandatory at competitive events and almost without exception at bike parks, most organisations also stipulate when and where full-face helmets must be used.

• Body armor and pads, often referred to simply as "armor", protect limbs and trunk in the event of a crash. While initially made for and marketed at downhillers, freeriders and jump/street riders, body armor has trickled into other areas of mountain biking as trails have become faster and more technical. Armor ranges from simple neoprene sleeves for knees and elbows to complex, articulated combinations of hard plastic shells and padding that cover a whole limb or the entire body. Some companies market body armor jackets and even full body suits designed to provide greater protection through greater coverage of the body and more secure pad retention. Most upper body protectors also include a spine protector that comprises plastic or metal reinforced plastic plates, over foam padding, which are joined together so that they articulate and move with the back. Some mountain bikers also use BMX-style body armor, such as chest plates, abdomen protectors, and spine plates. New technology has seen an influx of integrated neck protectors that fit securely with full face helmets. There is a general correlation between increased protection and increased weight/decreased mobility, although different styles balance these factors differently. Different levels of protection are deemed necessary/desirable by different riders in different circumstances. Backpack hydration systems such as Camelbaks where a water filled bladder is held close to the spine used by some riders for their perceived protective value. However, there is only anecdotal evidence of protection and with the exception of one specific product by the company Deuter, they are never sold as spine protection.

• First aid kits are often carried by mountain bikers, so that they are able to clean and dress cuts and abrasions and splint broken limbs. Experienced mountain bike guides may be trained in dealing with suspected spinal injuries (e.g., immobilizing the victim and keeping the neck straight). Seriously injured people may have to be removed by stretcher, by a motor vehicle suitable for the terrain, or by helicopter.

Types[link]

Mountain biking is dominated by these major categories:

A cross-country mountain biker climbs on an unpaved track

Typical more stout all-mountain bike on rough terrain

Downhill cycling.

Mountain bike trail riding (trail biking).

Mountain bike touring in high Alps.

• Cross-Country (XC) is the most popular form of mountain biking, and the standard for most riders. It generally means riding point-to-point or in a loop including climbs and descents on a variety of terrain. A typical XC bike weighs around 9-13 kilos (20-30 lbs), and has 0-125 millimeters (0-5 inches) of suspension travel front and sometimes rear.

• All-mountain (AM) bike category typically provides 125-180 millimeters (5-7 inches) of rear and front suspension travel and stronger components than XC models, while still providing overall weight suitable for climbing and descending on a variety of terrain.

• Downhill (DH) is, in the most general sense, riding mountain bikes downhill. The rider usually travels to the point of descent by other means than cycling, such as a ski lift or automobile, as the weight of the downhill mountain bike often precludes any serious climbing. While cross country riding inevitably has a downhill component, Downhill (or DH for short) usually refers to racing-oriented downhill riding. Downhill-specific bikes are universally equipped with front and rear suspension, large disc brakes, and use heavier frame tubing than other mountain bikes. Because of their extremely steep terrain (often located in summer at ski resorts), downhill courses are one of the most extreme and dangerous venues for mountain biking. They include large jumps (up to and including 12 meters (40 feet)), drops of 3+ meters (10+ feet), and are generally rough and steep top to bottom. To negotiate these obstacles at race speed, racers must possess a unique combination of total body strength, aerobic and anaerobic fitness, and mental control. Minimum body protection in a true downhill setting is knee pads and a full face helmet with goggles, although riders and racers commonly sport full body suits to protect themselves. Downhill bikes now weigh around 16-20 kilos (35-45 lbs), while professional downhill mountain bikes can weigh as little as 15 kilos (33 lbs), fully equipped with custom carbon fibre parts, air suspension, tubeless tires and more. Downhill frames get anywhere from 170-250 millimeters (7 to 10 inches) of travel and are usually mounted with a 200 millimeter (8 inch) travel dual-crown fork.

• Four-cross/Dual Slalom (4X) is a sport in which riders compete either on separate tracks, as in Dual Slalom, or on a short slalom track, as in 4X. Most bikes used are light hard-tails, although the last World Cup was actually won on a full suspension bike. The tracks have dirt jumps, berms, and gaps. Professionals in gravity mountain biking tend to concentrate either on downhill mountain biking or 4X/dual slalom because they are very different. However, some riders, such as Cedric Gracia, still do 4X and DH, although that is becoming more rare as 4X takes on its own identity.

• Freeride / Big Hit / Hucking. Freeride, as the name suggests is a 'do anything' discipline that encompasses everything from downhill racing without the clock to jumping, riding 'North Shore' style (elevated trails made of interconnecting bridges and logs), and generally riding trails and/or stunts that require more skill and aggressive techniques than XC. Freeride bikes are generally heavier and more amply suspended than their XC counterparts, but usually retain much of their climbing ability. It is up to the rider to build his or her bike to lean more toward a preferred level of aggressiveness. "Slopestyle" type riding is an increasingly popular genre that combines big-air, stunt-ridden freeride with BMX style tricks. Slopestyle courses are usually constructed at already established mountain bike parks and include jumps, large drops, quarter-pipes, and other wooden obstacles. There are always multiple lines through a course and riders compete for judges' points by choosing lines that highlight their particular skills. A "typical" freeride bike is hard to define, but 13-18 kilos (30-40) lbs with 150-250 millimeters (6-10 inches) of suspension front and rear.

• Dirt Jumping (DJ) is one of the names given to the practice of riding bikes over shaped mounds of dirt or soil and becoming airborne. The idea is that after riding over the 'take off' the rider will become airborne, and aim to land on the 'landing'. Dirt jumping can be done on almost anything but the bikes are generally smaller and more maneuverable hardtails so that tricks e.g. backflips, are easier to complete. The bikes are simpler so that when a crash occurs there are fewer components to break or cause the rider injury. Bikes are typically built from sturdier materials such as steel to handle repeated heavy impacts of crashes and bails.

• Trials riding consists of hopping and jumping bikes over obstacles, without touching a foot onto the ground. It can be performed either off-road or in an urban environment. It requires an excellent sense of balance. The emphasis is placed on techniques of effectively overcoming the obstacles, although street-trials (as opposed to competition-oriented trials) is much like Street and DJ, where doing tricks with style is the essence. Trials bikes look almost nothing like mountain bikes. They use either 20", 24" or 26" wheels and have very small, low frames, some types without a saddle.

• Urban/Street is essentially the same as urban BMX (or Freestyle BMX), in which riders perform tricks by riding on/over man made objects. The bikes are the same as those used for Dirt Jumping, having 24" or 26" wheels. Also, they are very light, many in the range of 25-30 lbs, and are typically hardtails with between 0-100 millimeters of front suspension. As with Dirt Jumping and Trials, style and execution are emphasized.

• Mountain bike trail riding or trail biking is recreational mountain biking on hiking trails ("hike on a bike"), dirt roads and unpaved tracks, forest paths, etc. (pictured at right); it's also practiced in dedicated "trail centers", such as the scenic Slickrock Trail. There are "trail bike" designs for this activity.

• Mountain Bike Touring is long distance touring on dirt roads and single track with a mountain bike. With the popularity of the Great Divide Trail, the Colorado Trail and other long distance off road biking trails specially fitted mountain bikes are increasingly being used for touring. Bike manufacturers like Salsa have even developed MTB touring bikes like the Fargo model. Mixed Terrain Cycle-Touring or rough riding is a form of mountain bike touring but involves cycling over a variety of surfaces and topography on a single route, with a single bicycle. The recent popularity of mixed terrain touring is in part a reaction against the increasing specialization of the bike industry. Focusing on freedom of travel and efficiency over varied surfaces, mixed terrain bicycle travel has a storied past.

Risks[link]

The risk of injury is inherent in the sport of mountain biking, especially in the more extreme disciplines such as downhill biking. Injuries range from relatively minor wounds, such as cuts and abrasions from falls on gravel to serious injuries such as striking the head or spine on a boulder or tree.

Protective equipment can protect against minor injuries, and reduce the extent or seriousness of major impacts, but it cannot protect a rider against the most serious impacts or accidents. To truly reduce the risk of injury, a rider needs to take steps to make injuries less likely, such as picking trails that they can handle given their experience level, ensuring that they are fit enough to deal with the trail they have chosen, and keeping their bike in top mechanical shape. If a mountain biker wishes to explore more dangerous trails or disciplines (types of mountain biking) such as downhill riding, they will need to learn new skills, such as jumping and avoiding obstacles.

Fitness is another issue; if a rider is not in good enough shape to ride a certain class of trail, they will become fatigued, which puts them at a higher risk of having an accident.

Lastly, maintenance of one's bike needs to be done more frequently for mountain biking than for casual commuter biking in the city. Mountain biking places much higher demands on every part of the bike. Jumps and impacts can crack the frame or damage the derailleurs or the tire rims, and steep, fast descents can quickly wear out brake pads. Thus, whereas a casual in-the-city rider may only check over and maintain their bike every few months, a mountain biker should check and properly maintain the bike before every ride.

Mountain biker gets air in Mount Hood National Forest.

Mountain bikers have faced land access issues from the beginnings of the sport. Areas where the first mountain bikers have ridden have faced serious restrictions or elimination of riding.

Opposition to the sport has led to the development of local, regional, and international mountain bike groups. The different groups that formed generally work to create new trails, maintain existing trails, and help existing trails that may have issues. Groups work with private and public entities from the individual landowner to city parks departments, on up through the state level at the DNR, and into the federal level. Different groups will work individually or together to achieve results.

Advocacy organizations work through a variety of means including education, trail work days, and trail patrols. Examples of the education an advocacy group can provide include: Educate local bicycle riders, property managers, and other user groups on the proper development of trails, and on the International Mountain Bicycling Association's rules of the Trail. Examples of trail work days can include: Flagging, cutting, and signing a new trail, or removing downed trees after a storm. A trail patrol is a bike rider who has had some training to help assist other (including non cyclists) trail users.

The International Mountain Bicycling Association (IMBA), is a non-profit advocacy group whose mission is to create, enhance and preserve trail opportunities for mountain bikers worldwide. IMBA serves as an umbrella organization for mountain biking advocacy worldwide, and represents more than 700 affiliated mountain biking groups. In 1988, five California mountain bike clubs linked to form IMBA. The founding clubs were: Concerned Off Road Bicyclists Association, Bicycle Trails Council East Bay, Bicycle Trails Council Marin, Sacramento Rough Riders, and Responsible Organized Mountain Pedalers.

IMBA developed "Rules of the Trail" to promote responsible and courteous conduct on shared-use trails.

• IMBA Rules of the Trail

1. Ride On Open Trails Only
2. Leave No Trace
3. Control Your Bicycle
4. Yield to Others
5. Never Scare Animals
6. Plan Ahead

Environmental impact[link]

Mountain Bikers at Marvin Braude Mulholland Gateway Park.

Studies reported in the IMBA (International Mountain Bike Association) Trail Solutions manual found that a mountain bike's impact on a given length of trail surface is comparable to that of a hiker and substantially less than that of an equestrian.^[4]

A critical literature review by Jason Lathrop [1] on the ecological impacts of mountain biking notes that few studies take mountain biking into account. He quotes the BLM: "An estimated 13.5 million mountain bicyclists visit public lands each year to enjoy the variety of trails. What was once a low use activity that was easy to manage has become more complex".

The environmental impacts of mountain biking can be greatly reduced by not riding on wet or sensitive trails, not skidding, and by staying on the trail.

See also[link]

Wikimedia Commons has media related to: Mountain biking

• International Mountain Bicycling Association
• NORBA
• Mountain bike racing
• Mountain bike orienteering
• Union Cycliste Internationale
• Bike trials riding
• Bunny hop (cycling)
• List of mountain bike areas and trails in the United Kingdom
• List of professional mountain bikers
• Outdoor exploration
• Mixed Terrain Cycle-Touring

References[link]

• The Socorro Country Fat Tire Trail Book, The Socorro Fat Tire Committee in association with the Socorro County Chamber of Commerce, Socorro County Chamber of Commerce, Socorros, New Mexico, 1993, stapled paperback pamphlet, ISBN 0-88307-712-4, See Socorro County, New Mexico
• International Mountain Biking Association

External links[link]

• Mountain biking at the Open Directory Project

Gee Atherton

Personal information
Full name	George David Atherton
Nickname	Gee, GeeMan
Born	(1985-02-26) 26 February 1985 (age 27) Salisbury, England, United Kingdom
Height	185 cm
Weight	85 kg
Team information
Current team	GT
Discipline	MTB
Role	Rider
Rider type	DH & 4X
Professional team(s)
2001 2002–2003 2004 2007–2011 2011–	Animal Animal/Muddy Fox Muddy Fox Animal Commençal GT Bicycles
Major wins
GBR DH National Champion (1 Wins) EUR DH European Champion (1 Wins) UCI DH World Champion (1 Wins) UCI DH World Cup (5 Wins) UCI 4X World Cup (1 Wins)
Medal record Competitor for  United Kingdom Mountain Bike World Championships Silver 2007 Fort William Downhill Gold 2008 Val Di Sol Downhill
Infobox last updated on 19 May 2009

Gee Atherton in the Elite Men's Dual Slalom race at the 2009 Sea Otter Classic in Laguna Seca, CA.

George David Atherton, known as Gee Atherton (born 26 February 1985, near Salisbury, England) is a professional racing cyclist specialising in downhill and four cross mountain bike racing, and is a multiple national champion, multiple World Cup winner, and 2010 downhill World Cup Champion.

Since 2007, Gee has been one third of the Animal Commençal racing team, alongside brother Dan Atherton and sister Rachel Atherton.

Gee, along with Rachael and Dan, is the star of the web series "The Atherton Project" a series which follows their day to day lives. In 2012 Gee will be racing for GT racing.

Gee appeared on the BBC's Top Gear (series 7), racing a Renault Clio down the streets of Lisbon and winning.^[1]

Palmarès[link]

References[link]

External links[link]

• athertonracing.co.uk
• Atherton Racing Profiles, Silverfish
• George Atherton, Doug Cook, Descent World, 2004
• Gee Atherton Interview, British Cycling, 29 April 2006
• An interview with the Athertons, Steve Thomas, Cycling News, 6 September 2007
• Gee Atherton Wins Garbanzo Downhill, NSMB, 10 August 2008