Tubalcain

ATLAS LATHE 4-jaw chuck demo TUBALCAIN

Order: Reorder
Duration: 3:44
Published: 13 Jan 2009
Updated: 16 Aug 2012

Author: mrpete222

To access a complete listing of all my shop videos-- click on this link. www.neme-s.org This is a demo on how to accurately center work in a 4 jaw chuck using the 2 chuck key method.

http://wn.com/ATLAS_LATHE_4-jaw_chuck_demo_TUBALCAIN

BROACHING A KEYWAY IN A PULLEY tubalcain

Order: Reorder
Duration: 6:55
Published: 26 Dec 2009
Updated: 15 Aug 2012

Author: mrpete222

To access a complete listing of all my shop videos-- click on this link. www.neme-s.org This is how to broach a key slot (keyway) in a pulley. I am cutting a 3/16" wide slot in a 5/8" bore aluminum pulley. This DAKE #0 ARBOR PRESS is a 1 1/2 Ton capacity.

http://wn.com/BROACHING_A_KEYWAY_IN_A_PULLEY_tubalcain

MACH SHOP TIPS #82 tubalcain Bought a used South Bend Lathe

Order: Reorder
Duration: 11:07
Published: 17 Apr 2012
Updated: 15 Aug 2012

Author: mrpete222

To access a complete listing of all my shop videos-- click on this link. www.neme-s.org Tubalcain bought a used SB lathe. He discusses the pros & cons of his purchase.

http://wn.com/MACH_SHOP_TIPS_82_tubalcain_Bought_a_used_South_Bend_Lathe

MACHINE SHOP TIPS #1 Taps tubalcain

Order: Reorder
Duration: 10:21
Published: 16 Sep 2010
Updated: 17 Aug 2012

Author: mrpete222

Tubalcain talks about TAPS (threading taps).

http://wn.com/MACHINE_SHOP_TIPS_1_Taps_tubalcain

antique model METAL SHAPER MODEL (like ATLAS) tubalcain

Order: Reorder
Duration: 8:39
Published: 13 Aug 2012
Updated: 18 Aug 2012

Author: mrpete222

Tubalcain shows an old machinist (modelmaker) built metal shaper.

http://wn.com/antique_model_METAL_SHAPER_MODEL_like_ATLAS_tubalcain

MACHINE SHOP TIPS #17 Threading to Shoulder tubalcain

Order: Reorder
Duration: 5:45
Published: 26 Dec 2010
Updated: 04 Aug 2012

Author: mrpete222

Tubalcain shows how to thread up to the chuck or shoulder the safe way. UPSIDE DOWN. I'm threading white DELRIN plastic to speed things up.

http://wn.com/MACHINE_SHOP_TIPS_17_Threading_to_Shoulder_tubalcain

CUTTING A STRAIGHT KEYWAY with BRIDGEPORT MILL tubalcain

Order: Reorder
Duration: 7:42
Published: 24 Dec 2009
Updated: 03 Aug 2012

Author: mrpete222

This is how to mill a straight keyway on a shaft using a BRIDGEPORT MILLING MACHINE. Watch my other video that show how to cut a woodruff (half moon) key seat. And yet another video that shows how to BROACH a keyway in a pulley bore.

http://wn.com/CUTTING_A_STRAIGHT_KEYWAY_with_BRIDGEPORT_MILL_tubalcain

BUILDING A MODEL STEAM ENGINE part 1 tubalcain

Order: Reorder
Duration: 9:07
Published: 10 Apr 2010
Updated: 14 Aug 2012

Author: mrpete222

This is part 1 of a 10 part series on building a model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many of the machining operations as well as erecting the engine are shown. The engine has a 2 1/2" bore and a 8 1/2" flywheel.

http://wn.com/BUILDING_A_MODEL_STEAM_ENGINE_part_1_tubalcain

TURNING A TAPER ON THE LOGAN LATHE tubalcain

Order: Reorder
Duration: 9:33
Published: 26 Mar 2010
Updated: 10 Aug 2012

Author: mrpete222

This is how to taper turn using the COMPOUND REST METHOD.

http://wn.com/TURNING_A_TAPER_ON_THE_LOGAN_LATHE_tubalcain

MACHINE SHOP TIPS #87 Identifying Metals Pt 3 tubalcain

Order: Reorder
Duration: 36:47
Published: 04 Aug 2012
Updated: 17 Aug 2012

Author: mrpete222

To access a complete listing of all my shop videos-- click on this link. www.neme-s.org This video is the FOURTH in a series of many videos on identifying common metals. Some of these metals are ELEMENTS, but most useful metals are alloys of two or more elements. The first several videos will cover the 25 common metallic ELEMENTS followed by the ALLOYS including some with trademarked names.

http://wn.com/MACHINE_SHOP_TIPS_87_Identifying_Metals_Pt_3_tubalcain

ANTIQUE NAVY KOHLER LIGHT PLANT generator tubalcain

Order: Reorder
Duration: 4:55
Published: 15 Aug 2012
Updated: 18 Aug 2012

Author: mrpete222

Tubalcain demonstrates an old KOHLER generator set. 110 volt, DC

http://wn.com/ANTIQUE_NAVY_KOHLER_LIGHT_PLANT_generator_tubalcain

Grizzly Milling Machine drill guide thanks tubalcain

Order: Reorder
Duration: 8:59
Published: 26 Dec 2010
Updated: 16 Aug 2012

Author: shopdogsam

The hippie in the machine shop with a get-er done attitude, just got-er done.. built a drill press drilling guide jig to drill crossholes in round stock, thanks to mrpete222 for the inspiration to get this project finished,, thanks tubalcain...I have needed this tool for some time now,, you explained it,, now I done went and built it..thanks. I aint got no bridgeport mill but me and this grizzly model # G1007 manual milling machine gets-er done most days,, I do got the Grizzly lathe # G9972Z to go with it,, easy to use, el-cheapo cast iron thing a ma jig, made in china, both have served me well in my home shop. everyone should be aware they do have limitations, no low speeds is one. subscribe, leave a comment, pass it on...no blueprint needed,, get back dog! enjoy,all is well on the east coast of Arkansas,,Thanks

http://wn.com/Grizzly_Milling_Machine_drill_guide_thanks_tubalcain

SCREW BACKLASH on Atlas Clausing Lathe tubalcain

Order: Reorder
Duration: 4:05
Published: 16 Dec 2009
Updated: 12 Aug 2012

Author: mrpete222

Tubalcain explains backlash between screws & nuts as applied to the atlas lathe crossfeed.

http://wn.com/SCREW_BACKLASH_on_Atlas_Clausing_Lathe_tubalcain

USING THE EDGEFINDER ON THE BRIDGEPORT MILL tubalcain

Order: Reorder
Duration: 8:09
Published: 17 Dec 2009
Updated: 15 Aug 2012

Author: mrpete222

This is how to find the edge of your work on a milling machine. You can then accurately locate holes or slots. In effect, your layout work can be done on the machine with great accuracy. This is done using a Starrett edgefinder.

http://wn.com/USING_THE_EDGEFINDER_ON_THE_BRIDGEPORT_MILL_tubalcain

large GYROSCOPE by tubalcain

Order: Reorder
Duration: 4:33
Published: 10 Dec 2009
Updated: 06 Aug 2012

Author: mrpete222

Here's a big gyroscope that I made just for fun. The wheel is made of zinc and is 5" in dia. and weighs 20 oz. Also equipped with ball bearings.

http://wn.com/large_GYROSCOPE_by_tubalcain

INDEX OF tubalcain MACHINE SHOP VIDEOS nov 2011

Order: Reorder
Duration: 6:38
Published: 20 Nov 2011
Updated: 27 Jul 2012

Author: mrpete222

This is an INDEX OF tubalcain MACHINE SHOP VIDEOS as of Nov 2011. Go to this website & you will see the samelist in a printable format. neme-s.org

http://wn.com/INDEX_OF_tubalcain_MACHINE_SHOP_VIDEOS_nov_2011

MACHINE SHOP TIPS #11 Drilling Crossholes tubalcain

Order: Reorder
Duration: 8:07
Published: 09 Dec 2010
Updated: 12 Aug 2012

Author: mrpete222

To access a complete listing of all my shop videos-- click on this link. www.neme-s.org Tubalcain shows how to drill crossholes in round stock. Here's another method--refer to this link. WWW. grizzly.com/products/H2940/images/1

http://wn.com/MACHINE_SHOP_TIPS_11_Drilling_Crossholes_tubalcain