F-16 Fighting Falcon
A USAF F-16C over Iraq in 2008
Role	Multirole jet fighter
National origin	United States
Manufacturer	General Dynamics Lockheed Martin
First flight	2 February 1974
Introduction	17 August 1978
Status	Active, in production
Primary users	United States Air Force 25 other users (see operators page)
Number built	4,500+
Unit cost	F-16A/B: US$14.6 million (1998 dollars)[1] F-16C/D: US$18.8 million (1998 dollars)[1]
Variants	General Dynamics F-16 VISTA
Developed into	Vought Model 1600 General Dynamics F-16XL Mitsubishi F-2

The General Dynamics F-16 Fighting Falcon is a multirole jet fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into a successful all-weather multirole aircraft. Over 4,500 aircraft have been built since production was approved in 1976.^[2] Although no longer being purchased by the U.S. Air Force, improved versions are still being built for export customers. In 1993, General Dynamics sold its aircraft manufacturing business to the Lockheed Corporation,^[3] which in turn became part of Lockheed Martin after a 1995 merger with Martin Marietta.^[4]

The Fighting Falcon is a fighter with numerous innovations including a frameless bubble canopy for better visibility, side-mounted control stick to ease control while maneuvering, a seat reclined 30 degrees to reduce the effect of g-forces on the pilot, and the first use of a relaxed static stability/fly-by-wire flight control system that makes it a highly nimble aircraft. The F-16 has an internal M61 Vulcan cannon and has 11 hardpoints for mounting weapons and other mission equipment.^[1] The F-16's official name is "Fighting Falcon", but "Viper" is commonly used by its pilots, due to a perceived resemblance to a viper snake as well as the Battlestar Galactica Colonial Viper starfighter.^[5][6]

In addition to active duty U.S. Air Force, Air Force Reserve Command, and Air National Guard units, the aircraft is also used by the USAF aerial demonstration team, the U.S. Air Force Thunderbirds, and as an adversary/aggressor aircraft by the United States Navy. The F-16 has also been procured to serve in the air forces of 25 other nations.^[7]

Development[link]

Lightweight Fighter Program[link]

Experience in the Vietnam War revealed the need for air superiority fighters and better air-to-air training for fighter pilots.^[8] Based on his experiences in the Korean War and as a fighter tactics instructor in the early 1960s Colonel John Boyd with mathematician Thomas Christie developed the Energy-Maneuverability theory to model a fighter aircraft's performance in combat. Boyd's work called for a small, lightweight aircraft that could maneuver with the minimum possible energy loss, and which also incorporated an increased thrust-to-weight ratio.^[9][10] In the late 1960s, Boyd gathered a group of like-minded innovators that became known as the Fighter Mafia and in 1969 they secured DoD funding for General Dynamics and Northrop to study design concepts based on the theory.^[11][12]

Air Force F-X proponents remained hostile to the concept because they perceived it as a threat to the F-15 program. However, the Advanced Day Fighter concept, renamed F-XX gained civilian political support under the reform-minded Deputy Secretary of Defense David Packard, who favored the idea of competitive prototyping. As a result in May 1971, the Air Force Prototype Study Group was established, with Boyd a key member, and two of its six proposals would be funded, one being the Lightweight Fighter (LWF). The Request for Proposals issued on 6 January 1972 called for a 20,000-pound (9,100 kg) class air-to-air day fighter with a good turn rate, acceleration and range, and optimized for combat at speeds of Mach 0.6–1.6 and altitudes of 30,000–40,000 feet (9,100–12,000 m). This was the region where USAF studies predicted most future air combat would occur. The anticipated average flyaway cost of a production version was $3 million. This production plan, though, was only notional as the USAF had no firm plans to procure the winner.^[13][14]

Finalists selected and flyoff[link]

A right side view of a YF-16 (foreground) and a Northrop YF-17, each armed with AIM-9 Sidewinder missiles.

Five companies responded and in 1972, the Air Staff selected General Dynamics' Model 401 and Northrop's P-600 for the follow-on prototype development and testing phase. GD and Northrop were awarded contracts worth $37.9 million and $39.8 million to produce the YF-16 and YF-17, respectively, with first flights of both prototypes planned for early 1974. To overcome resistance in the Air Force hierarchy, the Fighter Mafia and other LWF proponents successfully advocated the idea of complementary fighters in a high-cost/low-cost force mix. The "high/low mix" would allow the USAF to be able to afford sufficient fighters for its overall fighter force structure requirements. The mix gained broad acceptance by the time of the prototypes' flyoff, defining the relationship of the LWF and the F-15.^[15][16]

The YF-16 was developed by a team of General Dynamics engineers led by Robert H. Widmer.^[17] The first YF-16 was rolled out on 13 December 1973, and its 90-minute maiden flight was made at the Air Force Flight Test Center (AFFTC) at Edwards AFB, California, on 2 February 1974. Its actual first flight occurred accidentally during a high-speed taxi test on 20 January 1974. While gathering speed, a roll-control oscillation caused a fin of the port-side wingtip-mounted missile and then the starboard stabilator to scrape the ground, and the aircraft then began to veer off the runway. The GD test pilot, Phil Oestricher, decided to lift off to avoid crashing the machine, and safely landed it six minutes later. The slight damage was quickly repaired and the official first flight occurred on time. The YF-16's first supersonic flight was accomplished on 5 February 1974, and the second YF-16 prototype first flew on 9 May 1974. This was followed by the first flights of the Northrop's YF-17 prototypes on 9 June and 21 August 1974, respectively. During the flyoff, the YF-16s completed 330 sorties for a total of 417 flight hours;^[18] the YF-17s flew 288 sorties, covering 345 hours.^[19]

Air Combat Fighter competition[link]

Increased interest would turn the LWF into a serious acquisition program. North Atlantic Treaty Organization (NATO) allies Belgium, Denmark, the Netherlands, and Norway were seeking to replace their F-104G fighter-bombers.^[20] In early 1974, they reached an agreement with the U.S. that if the USAF ordered the LWF winner, they would consider ordering it as well. The USAF also needed to replace its F-105 and F-4 fighter-bombers. The U.S. Congress sought greater commonality in fighter procurements by the Air Force and Navy, and in August 1974 redirected Navy funds to a new Navy Air Combat Fighter (NACF) program that would be a navalized fighter-bomber variant of the LWF. The four NATO allies had formed the "Multinational Fighter Program Group" (MFPG) and pressed for a U.S. decision by December 1974; thus the USAF accelerated testing.^[21][22][23]

YF-16 on display at the Virginia Air and Space Center

To reflect this more serious intent to procure a new fighter-bomber design, the LWF program was rolled into a new Air Combat Fighter (ACF) competition in an announcement by U.S. Secretary of Defense James R. Schlesinger in April 1974. Schlesinger also made it clear that any ACF order would be for aircraft in addition to the F-15, which extinguished opposition to the LWF.^[22][23] ACF also raised the stakes for GD and Northrop because it brought in competitors intent on securing what was touted at the time as "the arms deal of the century".^[24] These were Dassault-Breguet's proposed Mirage F1M-53, the SEPECAT Jaguar, and the proposed Saab 37E "Eurofighter". Northrop offered the P-530 Cobra, which was similar to the YF-17. The Jaguar and Cobra were dropped by the MFPG early on, leaving two European and the two U.S. candidates. On 11 September 1974, the U.S. Air Force confirmed plans to place an order for the winning ACF design to equip five tactical fighter wings. Though computer modeling predicted a close contest, the YF-16 proved significantly quicker going from one maneuver to the next, and was the unanimous choice of those pilots that flew both aircraft.^[25] On 13 January 1975, Secretary of the Air Force John L. McLucas announced the YF-16 as the winner of the ACF competition.^[26]

The chief reasons given by the Secretary were the YF-16's lower operating costs, greater range and maneuver performance that was "significantly better" than that of the YF-17, especially at supersonic speeds. Another advantage of the YF-16 – unlike the YF-17 – was its use of the Pratt & Whitney F100 turbofan engine, the same powerplant used by the F-15; such commonality would lower the cost of engines for both programs.^[27] Secretary McLucas announced that the USAF planned to order at least 650, possibly up to 1,400 production F-16s. In the Navy Air Combat Fighter (NACF) competition, on 2 May 1975 the Navy selected the YF-17 as the basis for what would become the McDonnell Douglas F/A-18 Hornet.^[28][29]

Into production[link]

The U.S. Air Force initially ordered 15 "Full-Scale Development" (FSD) aircraft (11 single-seat and four two-seat models) for its flight test program, but this was reduced to eight (six F-16A single-seaters and two F-16B two-seaters).^[30] The YF-16 design was altered for the production F-16. The fuselage was lengthened by 10.6 in (0.269 m), a larger nose radome was fitted for the AN/APG-66 radar, wing area was increased from 280 sq ft (26 m²) to 300 sq ft (28 m²), the tailfin height was decreased, the ventral fins were enlarged, two more stores stations were added, and a single door replaced the original nosewheel double doors. The F-16's weight was increased by 25% over the YF-16 by these modifications.^[31][32]

A F-16C of the Colorado Air National Guard with AIM-9 Sidewinder missiles and a centerline fuel tank (300 gal capacity) after disengaging from a refueling boom.

The FSD F-16s were manufactured at General Dynamics' Fort Worth, Texas plant in late 1975; the first F-16A rolled out on 20 October 1976 and first flew on 8 December. The initial two-seat model achieved its first flight on 8 August 1977. The initial production-standard F-16A flew for the first time on 7 August 1978 and its delivery was accepted by the USAF on 6 January 1979. The F-16 was given its formal nickname of "Fighting Falcon" on 21 July 1980, entering USAF operational service with the 34th Tactical Fighter Squadron, 388th Tactical Fighter Wing at Hill AFB on 1 October 1980.^[33]

On 7 June 1975, the four European partners, now known as the European Participation Group, signed up for 348 aircraft at the Paris Air Show. This was split among the European Participation Air Forces (EPAF) as 116 for Belgium, 58 for Denmark, 102 for the Netherlands, and 72 for Norway. There would be two European production lines, one in the Netherlands at Fokker's Schiphol-Oost facility and the other at SABCA's Gossellies plant in Belgium; production would be divided among them as 184 and 164 units, respectively. Norway's Kongsberg Vaapenfabrikk and Denmark's Terma A/S also manufactured parts and subassemblies for EPAF aircraft. European co-production was officially launched on 1 July 1977 at the Fokker factory. Beginning in November 1977, Fokker-produced components were sent to Fort Worth for fuselage assembly, which were in turn shipped back to Europe for final assembly of EPAF aircraft at the Belgian plant on 15 February 1978, with deliveries to the Belgian Air Force from January 1979. The Dutch line started up in April 1978 and delivered its first aircraft to the Royal Netherlands Air Force in June 1979. In 1980 the first aircraft were delivered to the Royal Norwegian Air Force by SABCA and to the Royal Danish Air Force by Fokker.^[34][35]

During the late 1980s and 1990s, Turkish Aerospace Industries (TAI) has produced 232 Block 30/40/50 F-16s on a production line in Ankara under license for the Turkish Air Force. TAI also produced 30 Block 50 from 2010, and built 46 Block 40s for Egypt in the mid-1990s. Korean Aerospace Industries opened a domestic production line for the KF-16 program, producing 140 Block 52s from the mid-1990s to mid-2000s (decade). If India had selected the F-16IN for its Medium Multi-Role Combat Aircraft procurement, a sixth F-16 production line would be built in India.^[36]

Improvements and upgrades[link]

F-16 Fighting Falcon video by USAF

One change made during production was augmented pitch control to avoid deep stall conditions at high angles of attack. The stall issue had been raised during development, but had originally been discounted in the early design stages. Model tests of the YF-16 conducted by the Langley Research Center revealed a potential problem, but no other laboratory was able to duplicate it. YF-16 flight tests were not sufficient to expose the issue; it required later flight testing on the FSD aircraft to demonstrate there was a real concern. In response, the areas of the horizontal stabilizer were increased 25% on the Block 15 aircraft in 1981 and retrofitted later on to earlier aircraft. Besides a significant reduction in the risk of deep stalls, the larger horizontal tail also improved stability and permitted faster takeoff rotation.^[37][38]

In the 1980s, the Multinational Staged Improvement Program (MSIP) was conducted to evolve new capabilities for the F-16, mitigate risks during technology development, and ensure the aircraft's worth. The program upgraded the F-16 in three stages. The MSIP process permitted the introduction of new capabilities quicker, at lower costs and with reduced risks, compared to traditional independent programs to upgrade and modernize aircraft.^[39] Other upgrade programs, including service life extensions, have been conducted on the F-16.^[40]

Due to the slow pace of F-35 development, the USAF will spend $2.8 billion to upgrade and retain 350 F-16s.^[41] The more versatile multirole F-16s are being retained as the USAF reduces more focused platforms.^[42]

Design[link]

Overview[link]

Comparison between F-16's inset cannons; early aircraft had four vents, while later aircraft had two.

The F-16 is a single-engined, very maneuverable, supersonic, multi-role tactical aircraft. The F-16 was designed to be a cost-effective combat "workhorse" that can perform various kinds of missions and maintain around-the-clock readiness. It is much smaller and lighter than its predecessors, but uses advanced aerodynamics and avionics, including the first use of a relaxed static stability/fly-by-wire (RSS/FBW) flight control system, to achieve enhanced maneuver performance. Highly nimble, the F-16 can pull 9-g maneuvers and can reach a maximum speed of over Mach 2.

The Fighting Falcon includes innovations such as a frameless bubble canopy for better visibility, side-mounted control stick, and reclined seat to reduce g-force effects on the pilot. The F-16 has an internal M61 Vulcan cannon in the left wing root and has 11 hardpoints for mounting various missiles, bombs and pods. It was also the first fighter aircraft purpose built to sustain 9-g turns. It has a thrust-to-weight ratio greater than one, providing power to climb and accelerate vertically.^[1]

Early models could be armed with up to six AIM-9 Sidewinder heat-seeking short-range air-to-air missiles (AAM), including rail launchers on each wingtip. Some F-16s can employ the AIM-7 Sparrow medium-range AAM; more recent versions can equip the AIM-120 AMRAAM. It can also carry other AAM; a wide variety of air-to-ground missiles, rockets or bombs; electronic countermeasures (ECM), navigation, targeting or weapons pods; and fuel tanks on 11 hardpoints – six under the wings, two on wingtips and three under the fuselage.

General configuration[link]

F-16CJ Block 50 from 20th Fighter Wing at Shaw AFB, South Carolina, armed with air-to-air missiles including the AIM-9 Sidewinder and AIM-120 AMRAAM, AGM-88 HARM SEAD anti-radiation missiles, HARM Targeting System (HTS), AN/ALQ-184 Electronic Counter Measures (ECM) pod, and external wing fuel tanks (370 gal capacity)

The F-16 has a cropped-delta planform incorporating wing-fuselage blending and forebody vortex-control strakes; a fixed-geometry, underslung air intake to the single turbofan jet engine; a conventional tri-plane empennage arrangement with all-moving horizontal "stabilator" tailplanes; a pair of ventral fins beneath the fuselage aft of the wing's trailing edge; a single-piece, bird-proof "bubble" canopy; and a tricycle landing gear configuration with the aft-retracting, steerable nose gear deploying a short distance behind the inlet lip. There is a boom-style aerial refueling receptacle located a short distance behind the canopy. Split-flap speedbrakes are located at the aft end of the wing-body fairing, and an arrestor hook is mounted underneath the fuselage. Another fairing is situated beneath the bottom of the rudder, often used to house ECM equipment or a drag chute. Several later F-16 models, such as the F-16I, also have a long dorsal fairing "bulge" along the "spine" of the fuselage from the cockpit's rear to the tail fairing, it can be used for additional equipment or fuel.^[36][43]

The F-16 was designed to be relatively inexpensive to build and simpler to maintain than earlier-generation fighters. The airframe is built with about 80% aviation-grade aluminum alloys, 8% steel, 3% composites, and 1.5% titanium. The leading-edge flaps, tailerons, and ventral fins make use of bonded aluminum honeycomb structures and graphite epoxy laminate coatings. The number of lubrication points, fuel line connections, and replaceable modules is significantly lower than predecessors; 80% of access panels can be accessed without stands.^[36] The air intake was designed: "far enough forward to allow a gradual bend in the air duct up to the engine face to minimize flow losses and far enough aft so it wouldn't weigh too much or be too draggy or destabilizing."^[44]

Although the LWF program called for an aircraft structural life of 4,000 flight hours, capable of achieving 7.33 g with 80% internal fuel; GD's engineers decided to design the F-16's airframe life for 8,000 hours and for 9-g maneuvers on full internal fuel. This proved advantageous when the aircraft's mission changed from solely air-to-air combat to multi-role operations. Since introduction, changes in operational usage and additional systems have increased aircraft weight, necessitating several programs to strengthen its structure.^[45]

Wing and strake configuration[link]

Aerodynamic studies in the early 1960s demonstrated that the phenomenon known as "vortex lift" could be beneficially harnessed by the adoption of highly swept wing configurations to reach higher angles of attack through use of the strong leading edge vortex flow off a slender lifting surface. Since the F-16 was being optimized for high agility in air combat, GD's designers chose a slender cropped-delta wing with a leading edge sweep of 40° and a straight trailing edge. To improve maneuverability, a variable-camber wing with a NACA 64A-204 airfoil was selected; the camber is adjusted by leading-edge and trailing edge flaperons linked to a digital flight control system (FCS) regulating the flight envelope.^[36][45] The F-16 has a moderate wing loading, which is lower when fuselage lift is considered.^[46]

The vortex lift effect is increased by extensions of the leading edge at the wing root (the juncture with the fuselage) known as a strake. Strakes act as an additional elongated, short-span, triangular wing running from the actual wing root to a point further forward on the fuselage. Blended into the fuselage and along the wing root, the strake generates a high-speed vortex that remains attached to the top of the wing as the angle of attack increases, thereby generating additional lift and thus allowing greater angles of attack without stalling. The use of strakes also allows a smaller, lower-aspect-ratio wing, which increases roll rates and directional stability while decreasing weight. Deeper wingroots also increase structural strength and increase internal fuel volume.^[45]

Negative stability and fly-by-wire[link]

F-16C from the South Carolina Air National Guard in-flight over North Carolina equipped with AMRAAM missiles, Triple-Ejector Rack (TER) bomb rack, Lockheed Martin Sniper XR targeting pod, AN/ALQ-184 external Electronic Counter Measures (ECM) pod, HARM Targeting System (HTS) pod, and external fuel tanks (370 gal capacity)

The F-16 was the first production fighter aircraft intentionally designed to be slightly aerodynamically unstable, also known as "relaxed static stability" (RSS), to improve maneuverability.^[47] Most aircraft are designed with positive static stability, which induces aircraft to return to straight and level flight attitude if the pilot releases the controls. This reduces maneuverability as the aircraft must overcome its inherent stability in order to maneuver. Aircraft with negative stability are designed to deviate from controlled flight and thus be more maneuverable. At supersonic speeds the F-16 gains stability (eventually positive) due to changes in aerodynamic forces.^[48][49]

To counter the tendency to depart from controlled flight—and avoid the need for constant trim inputs by the pilot, the F-16 has a quadruplex (four-channel) fly-by-wire (FBW) flight control system (FLCS). The flight control computer (FLCC) accepts pilot input from the stick and rudder controls, and manipulates the control surfaces in such a way as to produce the desired result without inducing control loss. The FLCC conducts thousands of measurements per second on the aircraft's flight attitude to automatically counter deviations from the pilot-set flight path; leading to a common aphorism among pilots: "You don't fly an F-16; it flies you."^[50]

The FLCC further incorporates limiters that govern movement in the three main axes based on current attitude, airspeed and angle of attack (AOA), and prevent control surfaces from inducing instability such as slips or skids, or a high AOA inducing a stall. The limiters also prevent maneuvers that would exert more than a 9 g load.^[51] Although each axis of movement is limited by the FLCC, flight testing revealed that "assaulting" multiple limiters at high AOA and low speed can result in an AOA far exceeding the 25° limit; colloquially referred to as "departing". This cause a deep stall; a near-freefall at 50° to 60° AOA, either upright or inverted. While at a very high AOA, the aircraft's attitude is stable but control surfaces are ineffective and the aircraft's pitch limiter locks the stabilators at an extreme pitch-up or pitch-down attempting to recover; the pitch-limiting can be overridden so the pilot can "rock" the nose via pitch control to recover.^[52]

Unlike the YF-17, which had hydromechanical controls serving as a backup to the FBW, Grumman took the innovative step of eliminating mechanical linkages between the stick and rudder pedals and the aerodynamic control surfaces. The F-16 is entirely reliant on its electrical systems to relay flight commands, instead of traditional mechanically-linked controls, leading to the early moniker of "the electric jet". The quadruplex design permits "graceful degradation" in flight control response in that the loss of one channel renders the FLCS a "triplex" system.^[53] The FLCC began as an analog system on the A/B variants, but has been supplanted by a digital computer system beginning with the F-16C/D Block 40.^[54][55] The F-16's controls suffered from a sensitivity to static electricity or electrostatic discharge (ESD). Up to 70–80% of the C/D models' electronics were vulnerable to ESD.^[56]

Cockpit and ergonomics[link]

One feature of the F-16 for air-to-air combat performance is the cockpit's exceptional field of view. The single-piece, bird-proof polycarbonate bubble canopy provides 360° all-round visibility, with a 40° look-down angle over the side of the aircraft, and 15° down over the nose (compared to the more common 12–13° of preceding aircraft); the pilot's seat is elevated for this purpose. Furthermore, the F-16's canopy lacks the forward bow frame found on many fighters, which is an obstruction to a pilot's forward vision.^[36][57]

F-16 Ground Trainer Cockpit (F-16 MLU)

The F-16's ACES II zero/zero ejection seat is reclined at an unusual tilt-back angle of 30°; most fighters have a tilted seat at 13–15°. The seat angle was chosen to improve pilot tolerance of high g forces and reduce susceptibility to gravity-induced loss of consciousness. The seat angle has been associated with reports of neck ache, possibly caused by incorrect use of the head-rest.^[58] Subsequent U.S. fighters have adopted more modest tilt-back angles of 20°.^[36][59] Due to the seat angle and the canopy's thickness, the F-16's ejection seat lacks steel canopy breakers for emergency egress; instead the entire canopy is jettisoned prior to the seat's rocket firing.^[60]

The pilot flies primarily by means of an armrest-mounted side-stick controller (instead of a traditional center-mounted stick) and an engine throttle; conventional rudder pedals are also employed. To enhance the pilot's degree of control of the aircraft during high-g combat maneuvers, various switches and function controls were moved to centralised "hands on throttle-and-stick (HOTAS)" controls upon both the controllers and the throttle. Hand pressure on the side-stick controller is transmitted by electrical signals via the FBW system to adjust various flight control surfaces to maneuver the F-16. Originally the side-stick controller was non-moving, but this proved uncomfortable and difficult for pilots to adjust to, sometimes resulting in a tendency to "over-rotate" during takeoffs, so the control stick was given a small amount of "play". Since introduction on the F-16, HOTAS controls have become a standard feature on modern fighters.^[61]

The F-16 has a head-up display (HUD), which projects visual flight and combat information in front of the pilot without obstructing the view; being able to keep his head "out of the cockpit" improves a pilot's situational awareness.^[62] Further flight and systems information are displayed on multi-function displays (MFD). The left-hand MFD is the primary flight display (PFD), typically showing radar and moving-maps; the right-hand MFD is the system display (SD), presenting information about the engine, landing gear, slat and flap settings, and fuel and weapons status. Initially, the F-16A/B had monochrome cathode ray tube (CRT) displays; replaced by color liquid crystal displays on the Block 50/52.^[36][63] The MLU introduced compatibility with night-vision goggles (NVG). The Boeing Joint Helmet Mounted Cueing System (JHMCS) is available from Block 40 onwards, for targeting based on where the pilot's head faces, unrestricted by the HUD, using high-off-boresight missiles like the AIM-9X.^[64]

A F-16 "Aggressor" flying over the Alaska Range in April 2010

Fire-control radar[link]

The F-16A/B was originally equipped with the Westinghouse AN/APG-66 fire-control radar. Its slotted planar-array antenna was designed to be compact to fit into the F-16's relatively small nose. In uplook mode, the APG-66 uses a low pulse-repetition frequency (PRF) for medium- and high-altitude target detection in a low-clutter environment, and in downlook employs a medium PRF for heavy clutter environments. It has four operating frequencies within the X band, and provides four air-to-air and seven air-to-ground operating modes for combat, even at night or in bad weather. The Block 15's APG-66(V)2 model added a more powerful signal processor, higher output power, improved reliability and increased range in cluttered or jamming environments. The Mid-Life Update (MLU) program introduced a new model, APG-66(V)2A, which features higher speed and more memory.^[65]

The AN/APG-68, an evolution of the APG-66, was introduced with the F-16C/D Block 25. The APG-68 has greater range and resolution, as well as 25 operating modes, including ground-mapping, Doppler beam-sharpening, ground moving target, sea target, and track-while-scan (TWS) for up to 10 targets. The Block 40/42's APG-68(V)1 model added full compatibility with Lockheed Martin Low-Altitude Navigation and Targeting Infra-Red for Night (LANTIRN) pods, and a high-PRF pulse-Doppler track mode to provide continuous-wave (CW) target illumination for semi-active radar-homing (SARH) missiles like the AIM-7 Sparrow. Block 50/52 F-16s initially used the more reliable APG-68(V)5 which has a programmable signal processor employing Very-High-Speed Integrated Circuit (VHSIC) technology. The Advanced Block 50/52 (or 50+/52+) are equipped with the APG-68(V)9 radar, with a 30% greater air-to-air detection range and a synthetic aperture radar (SAR) mode for high-resolution mapping and target detection-recognition. In August 2004, Northrop Grumman were contracted to upgrade the APG-68 radars of the Block 40/42/50/52 aircraft to the (V)10 standard, providing the F-16 with all-weather autonomous detection and targeting for Global Positioning System (GPS)-aided precision weapons. It also adds SAR mapping and terrain-following (TF) modes, as well as interleaving of all modes.^[36]

The F-16E/F is outfitted with Northrop Grumman's AN/APG-80 Active Electronically Scanned Array (AESA) radar, making it only the third fighter to be so equipped.^[66] Northrop Grumman is continuing development upon this latest radar, to form the Scalable Agile Beam Radar (SABR).^[67] In July 2007, Raytheon announced that it was developing a Next Generation Radar (RANGR) based on its earlier AN/APG-79 AESA radar as a competitor to Northrop Grumman's AN/APG-68 and AN/APG-80 for the F-16.^[36]

Propulsion[link]

The powerplant first selected for the single-engined F-16 was the Pratt & Whitney F100-PW-200 afterburning turbofan, a slightly modified version of the F100-PW-100 used by the F-15. Rated at 23,830 lb_f (106.0 kN) thrust, it was the standard F-16 engine through the Block 25, except for new-build Block 15s with the Operational Capability Upgrade (OCU). The OCU introduced the 23,770 lb_f (105.7 kN) F100-PW-220, which was also installed on Block 32 and 42 aircraft: the main advance being a Digital Electronic Engine Control (DEEC) unit, which improved engine reliability and reduced stall occurrence. Added to the production line in 1988 the "-220" also supplanted the F-15's "-100", for commonality. Many of the "-220" engines on Block 25 and later aircraft were upgraded from mid-1997 to the "-220E" standard, which enhanced reliability and engine maintainability, unscheduled engine removals were reduced by 35%.^[68][69]

The F100-PW-220/220E was the result of the USAF's Alternate Fighter Engine (AFE) program (colloquially known as "the Great Engine War"), which also saw the entry of General Electric as an F-16 engine provider. Its F110-GE-100 turbofan was limited by the original inlet to thrust of 25,735 lb_f (114.5 kN), the Modular Common Inlet Duct allowed the F110 to achieve its maximum thrust of 28,984 lb_f (128.9 kN). (To distinguish between aircraft equipped with these two engines and inlets, from the Block 30 series on, blocks ending in "0" (e.g., Block 30) are powered by GE, and blocks ending in "2" (e.g., Block 32) are fitted with Pratt & Whitney engines.)^[68][70]

The Increased Performance Engine (IPE) program led to the 29,588 lb_f (131.6 kN) F110-GE-129 on the Block 50 and 29,160 lb_f (129.4 kN) F100-PW-229 on the Block 52. F-16s began flying with these IPE engines in the early 1990s. Altogether, of the 1,446 F-16C/Ds ordered by the USAF, 556 were fitted with F100-series engines and 890 with F110s.^[36] The United Arab Emirates’ Block 60 is powered by the General Electric F110-GE-132 turbofan, which is rated at a maximum thrust of 32,500 lb_f (144.6 kN), the highest developed for the F-16.^[71][72]

Operational history[link]

Due to their ubiquity, F-16s have participated in numerous conflicts, most of them in the Middle East.

United States[link]

Wisconsin ANG F-16s over Madison, Wisconsin. The tail of the formation's lead ship features a special 60th Anniversary scheme for the 115th Fighter Wing.

The F-16 is being used by the active duty USAF, Air Force Reserve, and Air National Guard units, the USAF aerial demonstration team, the U.S. Air Force Thunderbirds, and as an adversary-aggressor aircraft by the United States Navy at the Naval Strike and Air Warfare Center.

The U.S. Air Force, to include the Air Force Reserve and the Air National Guard, has flown the F-16 in combat during Operation Desert Storm in 1991, and in the Balkans later in the 1990s. F-16s also patrolled the no-fly zones in Iraq during Operations Northern Watch and Southern Watch and served during the wars in Afghanistan (Operation Enduring Freedom) and Iraq (Operation Iraqi Freedom) in the 2000s (decade). Most recently, the U.S. has deployed them to enforce the no-fly zone in Libya.

The F-16 is scheduled to remain in service with the U.S. Air Force until 2025.^[73] The planned replacement is the F-35A version of the Lockheed Martin F-35 Lightning II, which will gradually begin replacing a number of multi-role aircraft among the program's member nations.

Israel[link]

An Israeli F-16I (Block 52) with conformal fuel tanks (CFTs), external fuel tanks (370 gal capacity), internal/integrated Electronic Counter Measures on the spine of the aircraft, Advanced Identification Friend or Foe (AIFF), Python (missile), LITENING targeting pod, and AN/AAQ-13 navigation pod participating in a RED FLAG exercise at Nellis AFB, NV, July 2009

The F-16's first air-to-air combat success was achieved by the Israeli Air Force (IAF) over the Bekaa Valley on 28 April 1981, against a Syrian Mi-8 helicopter, which was downed with cannon fire.^[74] On 7 June 1981, eight Israeli F-16s, escorted by F-15s, executed Operation Opera, their first employment in a significant air-to-ground operation. This raid severely damaged Osirak, an Iraqi nuclear reactor under construction near Baghdad, to prevent the regime of Saddam Hussein from using the reactor for the creation of nuclear weapons.^[75]

The following year, during the 1982 Lebanon War Israeli F-16s engaged Syrian aircraft in one of the largest air battles involving jet aircraft, which began on 9 June and continued for two more days. Israeli Air Force F-16s were credited with numerous air-to-air kills during the conflict.^[74][76] F-16s were also used in their ground-attack role for strikes against targets in Lebanon. IAF F-16s participated in the 2006 Lebanon War and during the attacks in the Gaza strip in December 2008.^[77]

Pakistan[link]

The Pakistan Air Force's new F-16D Block 52+ fighters with internal/integrated Electronic Counter Measures (ECM) systems undergoing flight testing

During the Soviet-Afghan war, between May 1986 and January 1989, Pakistan Air Force (PAF) F-16s shot down at least 10 intruders from Afghanistan.^[78]

The Pakistan Air Force has used its F-16s in various foreign and internal military exercises, such as the "Indus Vipers" exercise in 2008 conducted jointly with Turkey.^[79] Since May 2009, the PAF has also been using their F-16 fleet to attack militant positions and support the Pakistan Army's operations in North-West Pakistan against the Taliban insurgency.^[80] As of November 2011, PAF F-16 have launched 5,500 sorties in operations.^[81]

PAF F-16s patrolled the Indian border during the Kargil Conflict and during the 2008 tension^[82] with India. PAF F-16s also participated in the International Red Flag (United States Air Force) exercises in 2010.^{[citation needed]}

Turkey[link]

The Turkish Air Force acquired its first F-16s in 1987. Turkish Air Force F-16 units participated in the Bosnia Herzegovina and Kosovo since 1993 in support of United Nations resolutions.^[83] The F-16s were extensively used in Turkey's ongoing conflict with Kurdish terrorists in Southeastern Turkey and Northern Iraq. Most notably during winter bombing campaign of 2008 Turkish incursion into northern Iraq where Turkey launched its first cross-border raid on 16 December 2007, involving 50 fighters before Operation Sun. This was the first time Turkey had mounted a night-bombing operation on a massive scale, and also the largest operation conducted by Turkish Air Force.^[84]

Others[link]

The Royal Netherlands Air Force, Belgian Air Force, Royal Danish Air Force, Royal Norwegian Air Force, Pakistan Air Force, and Venezuela have flown the F-16 on combat missions.^[85][86] A Serbian MiG-29 was shot down by a Dutch F-16AM during the Kosovo War in 1999.^[87] Belgian and Danish F-16s also participated in joint operations over Kosovo during the war.^[87]

Variants[link]

A Portuguese Air Force F-16A with AIM-9 Sidewinder missiles, AN/ALQ-131 ECM pods, and external fuel tanks (370 gal capacity), preparing to refuel

F-16 models are denoted by increasing block numbers to denote upgrades. The blocks cover both single- and two-seat versions. A variety of software, hardware, systems, weapons compatibility, and structural enhancements have been instituted over the years to gradually upgrade production models and retrofit delivered aircraft.

While many F-16s were produced according to these block designs, there have been many other variants with significant changes, usually due to modification programs. Other changes have resulted in role-specialization, such as the close air support and reconnaissance variants. Several models were also developed to test new technology. The F-16 design also inspired the design of other aircraft, which are considered derivatives. Older F-16s are being converted into QF-16 drone targets.^[88]

F-16A/B

The F-16A (single seat) and F-16B (two seat) were initial production variants. These variants include the Block 1, 5, 10 and 20 versions. Block 15 was the first major change to the F-16 with larger horizontal stabilizers. It is the most numerous F-16 variant with 475 produced.^[89]

F-16C/D

The F-16C (single seat) and F-16D (two seat) variants entered production in 1984. The first C/D version was the Block 25 with improved cockpit avionics and radar which added all-weather capability with beyond-visual-range (BVR) AIM-7 and AIM-120 air-air missiles. Block 30/32, 40/42, and 50/52 were later C/D versions.^[90] The F-16C/D had a unit cost of US$18.8 million (1998).^[1]

A United Arab Emirates Air Force F-16E Block 60 with the Lockheed Martin Sniper XR targeting pod, captive/training AGM-65 Maverick missiles, captive/training AIM-9 Sidewinder missiles, centerline fuel tanks (300 gal capacity), Conformal Fuel Tanks (CFTs), Advanced Identify Friend or Foe (AIFF) and internal/integrated Electronic Counter Measures (ECM), taking off after taxiing out of the Lockheed Martin plant in Fort Worth, Texas.

F-16E/F

The F-16E (single seat) and F-16F (two seat) are newer F-16 variants. The Block 60 version is based on the F-16C/D Block 50/52 and has been developed especially for the United Arab Emirates (UAE). It features improved AN/APG-80 Active Electronically Scanned Array (AESA) radar, avionics, conformal fuel tanks (CFTs), and the more powerful GE F110-132 engine.^[91][92]

F-16IN

For the Indian MRCA competition for the Indian Air Force, Lockheed Martin offered the F-16IN Super Viper.^[93] The F-16IN is based on the F-16E/F Block 60 and features conformal fuel tanks; AN/APG-80 AESA radar, GE F110-132A engine with FADEC controls; electronic warfare suite and infra-red searching (IRST); updated glass cockpit; and a helmet-mounted cueing system.^[94] As of 2011, the F-16IN is no longer in the competition.^[95]

F-16IQ

In September 2010, the Defense Security Cooperation Agency informed the United States Congress of a possible Foreign Military Sale of 18 F-16IQ aircraft along with the associated equipment and services to the newly reformed Iraqi Air Force. Total value of sale is estimated at US$4.2 billion.^[96]

F-16V

Lockheed Martin unveiled plans for a new variant of F-16 (which carries a V suffix, referencing to its Viper nickname) at the 2012 Singapore Air Show. George Standridge, vice-president of business development at Lockheed Martin Aeronautics, was quoted to say that the new variant will feature an active electronically scanned array (AESA) radar, a new mission computer and various cockpit improvements; further details revealed that this package can be retrofitted to previous F-16s as well, making these aircraft comparable to the Block 60 variant.^[97]

Operators[link]

F-16 operators (former operators in red)

4,500 F-16s had been delivered by April 2012.^[98]

Former operators[link]

•  Italy - On 23 May 2012, the Italian Air Force retired its F-16s^[99]

Notable accidents and incidents[link]

A U.S. Air Force Thunderbirds pilot ejects from his F-16 at an air show in September 2003

• On 8 May 1975, while practicing a 9-g aerial display maneuver with the second YF-16 (tail number 72-1568) at Fort Worth, prior to being sent to the Paris Air Show, one of the main landing gear jammed. The test pilot, Neil Anderson, had to perform an emergency gear-up landing and chose to do so in the grass, hoping to minimize damage and to avoid injuring any observers. The aircraft was only slightly damaged, but due to the mishap the first prototype was sent to the Paris Air Show in its place.^[100]

• On 15 November 1982, outside Kunsan Air Base in South Korea, during a training mission, USAF Captain Ted Harduvel crashed inverted into a mountain ridge. In 1985, Harduvel's widow filed a lawsuit against General Dynamics claiming an electrical malfunction, not pilot error as the cause according to the USAF; a jury awarded the plaintiff $3.4 million in damages. However in 1989, the United States Court of Appeals ruled the contractor had immunity to lawsuits, overturning the previous judgment. The court did remand the plaintiff's claim of electrical malfunction as the cause, noting that General Dynamics and the USAF knew about chafing of instrumentation wiring, but had not disclosed initially.^[101] The accident and subsequent trial was the subject of the 1992 film Afterburn.^[102][103]

• During a joint Army-Air Force exercise being conducted at Pope AFB, North Carolina, on 23 March 1994, F-16D (AF Serial No. 88-0171) of the 23d Fighter Wing / 74th Fighter Squadron was simulating an engine-out approach when it collided with a USAF C-130E. Both F-16 crew members ejected, but their aircraft, on full afterburner, continued on an arc towards Green Ramp and struck a USAF C-141 that was embarking US Army paratroopers. This accident resulted in 24 fatalities and at least 80 others injured. It has since been known as the "Green Ramp disaster".^[104]

• On 15 September 2003, a USAF Thunderbird F-16C crashed during a Mountain Home AFB, Idaho, air show. Captain Christopher Stricklin attempted a "Split S" maneuver based on an incorrect mean-sea-level altitude of the airfield. Climbing to only 1,670 ft (510 m) above ground level instead of 2,500 ft (760 m), Stricklin had insufficient altitude to complete the maneuver, but was able to guide the aircraft away from spectators and ejected less than one second before impact. Stricklin survived with only minor injuries; the aircraft was destroyed. USAF procedure for demonstration "Split-S" maneuvers was changed, requiring both pilots and controllers to use above mean-sea-level altitudes.^[105][106]

Specifications (F-16C Block 30)[link]

Testing of the F-35 Diverterless Supersonic Inlet on an F-16 testbed. The original intake is shown in the top image.

F-16C block 52 of the Hellenic Air Force with conformal fuel tanks and AIFF.

M61A1 on display.

Data from USAF sheet,^[1] International Directory of Military Aircraft^[47]

General characteristics

• Crew: 1
• Length: 49 ft 5 in (15.06 m)
• Wingspan: 32 ft 8 in (9.96 m)
• Height: 16 ft (4.88 m)
• Wing area: 300 ft² (27.87 m²)
• Airfoil: NACA 64A204 root and tip
• Empty weight: 18,900 lb (8,570 kg)
• Loaded weight: 26,500 lb (12,000 kg)
• Max. takeoff weight: 42,300 lb (19,200 kg)
• Powerplant: 1 × F110-GE-100 afterburning turbofan
  • Dry thrust: 17,155 lbf (76.3 kN)
  • Thrust with afterburner: 28,600 lbf (127 kN)

Performance

• Maximum speed:
  
  • At sea level: Mach 1.2 (915 mph, 1,470 km/h)^[47]
  • At altitude: Mach 2+ (1,500 mph, 2,410 km/h^[1]) clean configuration
• Combat radius: 340 mi (295 nmi, 550 km) on a hi-lo-hi mission with six 1,000 lb (450 kg) bombs
• Ferry range: 2,280 NM (2,620 mi, 4,220 km) with drop tanks
• Service ceiling: 50,000+ ft^[1] (15,240+ m)
• Rate of climb: 50,000 ft/min (254 m/s)
• Wing loading: 88.3 lb/ft² (431 kg/m²)
• Thrust/weight: 1.095

Armament

• Guns: 1× 20 mm (0.787 in) M61 Vulcan 6-barreled gatling cannon, 511 rounds
• Hardpoints: 2× wing-tip Air-to-air missile launch rails, 6× under-wing & 3× under-fuselage pylon stations holding up to 17,000 lb (7,700 kg) of payload
• Rockets:
  
  • 4× LAU-61/LAU-68 rocket pods (each with 19× /7× Hydra 70 mm rockets, respectively) or
  • 4× LAU-5003 rocket pods (each with 19× CRV7 70 mm rockets) or
  • 4× LAU-10 rocket pods (each with 4× Zuni 127 mm rockets)
• Missiles:
  
  • Air-to-air missiles:
    • 2× AIM-7 Sparrow or
    • 6× AIM-9 Sidewinder or
    • 6× IRIS-T or
    • 6× AIM-120 AMRAAM or
    • 6× Python-4
  • Air-to-ground missiles:
    • 6× AGM-45 Shrike or
    • 6× AGM-65 Maverick or
    • 4× AGM-88 HARM
  • Anti-ship missiles:
    • 2× AGM-84 Harpoon or
    • 4× AGM-119 Penguin
• Bombs:
  
  • 8× CBU-87 Combined Effects Munition
  • 8× CBU-89 Gator mine
  • 8× CBU-97 Sensor Fuzed Weapon
  • Wind Corrected Munitions Dispenser capable
  • 4× GBU-10 Paveway II
  • 6× GBU-12 Paveway II
  • 4× JDAM
  • 4× Mark 84 general-purpose bombs
  • 8× Mark 83 GP bombs
  • 12× Mark 82 GP bombs
  • 8× Small Diameter Bomb
  • 3× B61 nuclear bomb
• Others:
  • SUU-42A/A Flares/Infrared decoys dispenser pod and chaff pod or
  • AN/ALQ-131 & AN/ALQ-184 ECM pods or
  • LANTIRN, Lockheed Martin Sniper XR & LITENING targeting pods or
  • up to 3× 300/330/370 US gallon Sargent Fletcher drop tanks for ferry flight/extended range/loitering time.

Avionics

• AN/APG-68 radar

Notable appearances in media[link]

See also[link]

	United States Air Force portal
	Aviation portal

• 4th generation jet fighter
• Green Ramp disaster
  

Related development

• Vought Model 1600
• General Dynamics F-16 VISTA
• General Dynamics F-16XL
• AIDC F-CK-1 Ching-kuo
• KAI T-50 Golden Eagle
• Mitsubishi F-2
  

Aircraft of comparable role, configuration and era

• Chengdu J-10
• Dassault Mirage 2000 (F-16A Block 15)
• McDonnell Douglas F/A-18 Hornet
• Northrop F-20 Tigershark (F-16A Block 10)
• Dassault Rafale
• JAS 39 Gripen
• JF-17 Thunder
• Eurofighter Typhoon
• Mikoyan MiG-29
• Northrop YF-17
  

Related lists

• List of active United States military aircraft
• List of fighter aircraft
  

References[link]

Notes

Bibliography

Further reading[link]

• Drendel, Lou. F-16 Fighting Falcon – Walk Around No. 1. Carrollton, Texas: Squadron/Signal Books, 1993. ISBN 0-89747-307-8.
• Gunston, Bill. United States Military Aircraft of the 20th Century London: Salamander Books Ltd, 1984. ISBN 0-86101-163-5.
• Jenkins, Dennis R. McDonnell Douglas F-15 Eagle, Supreme Heavy-Weight Fighter. Arlington, Texas: Aerofax, 1998. ISBN 1-85780-081-8.
• Sweetman, Bill. Supersonic Fighters: The F-16 Fighting Falcons. Mankato, Minnesota: Capstone Press, 2008. ISBN 1-4296-1315-7.
• Williams, Anthony G. and Dr. Emmanuel Gustin. Flying Guns: The Modern Era. Ramsbury, UK: The Crowood Press, 2004. ISBN 1-86126-655-3.

External links[link]

Wikimedia Commons has media related to: F-16 Fighting Falcon

External images
Lockheed F-16E Block 60 Fighting Falcon Cutaway
	Lockheed F-16E Block 60 Fighting Falcon Cutaway from Flightglobal.com

• F-16 USAF fact sheet
• F-16 page on LockheedMartin.com
• F-16.net Extensive and up-to-date Fighting Falcon resource
• F-16 page on GlobalSecurity.org
• F-16 profile on Aerospaceweb.org
• F-16 profile on Scramble Dutch Aviation Society
• Greek F-16 C/D Fighting Block 52