Startup, Info and Landing of the Bf 110, yes rpm is neither rounds nor resolutions per minute but revolutions per minute... :) - Default keys for engine1,2;both: Shift+1,2,^ Thx to Trautloft as plane Instructor. Step by Step Description: 1. Open the Coolers, Oil coolers with the brown Handles to the left - by pushing them down, Water Coolers in the Middle of the Cockpit by rolling the left and right button(behind the flight stick) all the way to left. 2. Push the red handles to the left all the way to the front ( this enables the Fuel). 3. Set the Magnetos to M1+2. 4. Push Ctrl + W to enable the bombs, choose between Dive and Skip Bombing by switching the button on the Bottom below and behind the Stick either to the right (skip) or to the left (dive). 5.Trimm the Plane - On the right side of the cockpit you see me moving this little black handle just a little bit to the right. Do it just like that, about 1cm to the right. 6.Now you need to choose the 1. Engine. You do that by equipping a button in the Options or by using the Default keys. Defaul should be hitting Shift+1. 7.Now you have choosen engine number one and hit the Ignition Button on you Keyboard ( should be either E or I by Default), this is taking a few seconds, in the time until the engine starts you should set the Throttle for the 1. Engine to about 10 Percent ( yellow handle to the left). 8. Repeat step number 7 but now for Engine Number 2 ( choose it by Shift+2). 9. Switch back to both Engines by hitting Shift + ^ 10. Beware of the 3 Main control devices you are going to need now in addition: The Prop Pitch Control ( little metal Handles to the left), the control for the landing gear next to it, aswell as the flaps control next to it. 11. Lower the Flaps to 20 degrees for the TakeOff ( The Indicator for the Degrees of the Flaps is behind the Throttle (yellow Handles) on the left wall of the Plane. The little red Triangle shows you which setting they are. Like the 3 other crls in step 10, the have a middle position before reacting to your input, so you need to push the button twice before the machine reacts. ( btw you cannot set the flaps before you have started Engine number 2 because it creates the Power for this). 12.Set your Prop Pitch to 12 o´clock. 13. Now you are rdy to roll to the Runway, taxi by carefully using the breaks and the Rudder cntrls while slightly giving some throttle. 14. Take Off, give full throttle, compensate with the Rudder, pull the machine up before reaching 200 km/h and raise the landing gear when you have reached about 150 meters of altitude. 15. Destroy the Enemy.

• published: 07 Nov 2013
• views: 509