The Hypertext Transfer Protocol (HTTP) is a networking protocol for distributed, collaborative, hypermedia information systems. HTTP is the foundation of data communication for the World Wide Web.

The standards development of HTTP has been coordinated by the Internet Engineering Task Force (IETF) and the World Wide Web Consortium (W3C), culminating in the publication of a series of Requests for Comments (RFCs), most notably RFC 2616 (June 1999), which defines HTTP/1.1, the version of HTTP in common use.

Technical overview

HTTP functions as a request-response protocol in the client-server computing model. In HTTP, a web browser, for example, acts as a ''client'', while an application running on a computer hosting a web site functions as a ''server''. The client submits an HTTP ''request'' message to the server. The server, which stores content, or provides ''resources'', such as HTML files, or performs other functions on behalf of the client, returns a response message to the client. A response contains completion status information about the request and may contain any content requested by the client in its message body.

A web browser (or client) is often referred to as a ''user agent'' (UA). Other user agents can include the indexing software used by search providers, known as web crawlers, or variations of the web browser such as voice browsers, which present an interactive voice user interface.

The HTTP protocol is designed to permit intermediate network elements to improve or enable communications between clients and servers. High-traffic websites often benefit from web cache servers that deliver content on behalf of the original, so-called ''origin server'' to improve response time. HTTP proxy servers at network boundaries facilitate communication when clients without a globally routable address are located in private networks by relaying the requests and responses between clients and servers.

HTTP is an Application Layer protocol designed within the framework of the Internet Protocol Suite. The protocol definitions presume a reliable Transport Layer protocol for host-to-host data transfer. The Transmission Control Protocol (TCP) is the dominant protocol in use for this purpose. However, HTTP has found application even with unreliable protocols, such as the User Datagram Protocol (UDP) in methods such as the Simple Service Discovery Protocol (SSDP).

HTTP Resources are identified and located on the network by Uniform Resource Identifiers (URIs)—or, more specifically, Uniform Resource Locators (URLs)—using the http or https URI schemes. URIs and the Hypertext Markup Language (HTML), form a system of inter-linked resources, called hypertext documents, on the Internet, that led to the establishment of the World Wide Web in 1990 by English physicist Tim Berners-Lee.

The original version of HTTP (HTTP/1.0) was revised in HTTP/1.1. HTTP/1.0 uses a separate connection to the same server for every request-response transaction, while HTTP/1.1 can reuse a connection multiple times, to download, for instance, images for a just delivered page. Hence HTTP/1.1 communications experience less latency as the establishment of TCP connections presents considerable overhead.

History

The term HyperText was coined by Ted Nelson who in turn was inspired by Vannevar Bush's microfilm-based "memex". Tim Berners-Lee first proposed the "WorldWideWeb" project — now known as the World Wide Web. Berners-Lee and his team are credited with inventing the original HTTP protocol along with the HTML and the associated technology for a web server and a text-based web browser. The first version of the protocol had only one method, namely GET, which would request a page from a server. The response from the server was always a HTML page.

The first documented version of HTTP was HTTP V0.9 (1991). Dave Raggett led the HTTP Working Group (HTTP WG) in 1995 and wanted to expand the protocol extended operations, extended negotiation, richer meta-information, tied with a security protocol and got more efficient by adding additional methods and header fields. RFC 1945 officially introduced and recognized HTTP V1.0 in 1996.

The HTTP WG planned to publish new standards in December 1995 and the support for pre-standard HTTP/1.1 based on the then developing RFC 2068 (called HTTP-NG) was rapidly adopted by the major browser developers in early 1996. By March 1996, pre-standard HTTP/1.1 was supported in Arena, Netscape 2.0, Netscape Navigator Gold 2.01, Mosaic 2.7, Lynx 2.5, and in Internet Explorer 3.0. End user adoption of the new browsers was rapid. In March 1996, one web hosting company reported that over 40% of browsers in use on the Internet were HTTP 1.1 compliant. That same web hosting company reported that by June 1996, 65% of all browsers accessing their servers were HTTP/1.1 compliant. The HTTP/1.1 standard as defined in RFC 2068 was officially released in January 1997. Improvements and updates to the HTTP/1.1 standard were released under RFC 2616 in June 1999.

HTTP session

An HTTP session is a sequence of network request-response transactions. An HTTP client initiates a request by establishing a Transmission Control Protocol (TCP) connection to a particular port on a server (typically port 80; see List of TCP and UDP port numbers). An HTTP server listening on that port waits for a client's request message. Upon receiving the request, the server sends back a status line, such as "HTTP/1.1 200 OK", and a message of its own, the body of which is perhaps the requested resource, an error message, or some other information.

Request message

The request message consists of the following:

Request line, such as GET /images/logo.png HTTP/1.1, which requests a resource called /images/logo.png from server

Headers, such as Accept-Language: en

An empty line

An optional message body

The request line and headers must all end with (that is, a carriage return followed by a line feed). The empty line must consist of only and no other whitespace. Although is required alone is also accepted by most servers. In the HTTP/1.1 protocol, all headers except Host are optional.

A request line containing only the path name is accepted by servers to maintain compatibility with HTTP clients before the HTTP/1.0 specification in RFC1945.

Request methods

HTTP defines nine methods (sometimes referred to as "verbs") indicating the desired action to be performed on the identified resource. What this resource represents, whether pre-existing data or data that is generated dynamically, depends on the implementation of the server. Often, the resource corresponds to a file or the output of an executable residing on the server.

; HEAD: Asks for the response identical to the one that would correspond to a GET request, but without the response body. This is useful for retrieving meta-information written in response headers, without having to transport the entire content. ; GET: Requests a representation of the specified resource. Requests using GET (and a few other HTTP methods) "SHOULD NOT have the significance of taking an action other than retrieval". The W3C has published guidance principles on this distinction, saying, "Web application design should be informed by the above principles, but also by the relevant limitations." See safe methods below. ; POST: Submits data to be processed (e.g., from an HTML form) to the identified resource. The data is included in the body of the request. This may result in the creation of a new resource or the updates of existing resources or both. ; PUT: Uploads a representation of the specified resource. ; DELETE: Deletes the specified resource. ; TRACE: Echoes back the received request, so that a client can see what (if any) changes or additions have been made by intermediate servers. ; OPTIONS: Returns the HTTP methods that the server supports for specified URL. This can be used to check the functionality of a web server by requesting '*' instead of a specific resource. ; CONNECT: Converts the request connection to a transparent TCP/IP tunnel, usually to facilitate SSL-encrypted communication (HTTPS) through an unencrypted HTTP proxy. ; PATCH: Is used to apply partial modifications to a resource.

HTTP servers are required to implement at least the GET and HEAD methods and, whenever possible, also the OPTIONS method.

Safe methods

Some methods (for example, HEAD, GET, OPTIONS and TRACE) are defined as ''safe'', which means they are intended only for information retrieval and should not change the state of the server. In other words, they should not have side effects, beyond relatively harmless effects such as logging, caching, the serving of banner advertisements or incrementing a web counter. Making arbitrary GET requests without regard to the context of the application's state should therefore be considered safe.

By contrast, methods such as POST, PUT and DELETE are intended for actions that may cause side effects either on the server, or external side effects such as financial transactions or transmission of email. Such methods are therefore not usually used by conforming web robots or web crawlers; some that do not conform tend to make requests without regard to context or consequences.

Despite the prescribed safety of ''GET'' requests, in practice their handling by the server is not technically limited in any way. Therefore, careless or deliberate programming can cause non-trivial changes on the server. This is discouraged, because it can cause problems for Web caching, search engines and other automated agents, which can make unintended changes on the server.

Furthermore, methods such as TRACE, TRACK and DEBUG are considered potentially 'unsafe' by some security professionals, because they can be used by attackers to gather information or bypass security controls during attacks. Security software tools such as Tenable Nessus and Microsoft URLScan report on the presence of these methods as being security issues.

Idempotent methods and web applications

Methods PUT and DELETE are defined to be idempotent, meaning that multiple identical requests should have the same effect as a single request. Methods GET, HEAD, OPTIONS and TRACE, being prescribed as safe, should also be idempotent, as HTTP is a stateless protocol.

In contrast, the POST method is not necessarily idempotent, and therefore sending an identical POST request multiple times may further affect state or cause further side effects (such as financial transactions). In some cases this may be desirable, but in other cases this could be due to an accident, such as when a user does not realize that their action will result in sending another request, or they did not receive adequate feedback that their first request was successful. While web browsers may show alert dialog boxes to warn users in some cases where reloading a page may re-submit a POST request, it is generally up to the web application to handle cases where a POST request should not be submitted more than once.

Note that whether a method is idempotent is not enforced by the protocol or web server. It is perfectly possible to write a web application in which (for example) a database insert or other non-idempotent action is triggered by a GET or other request. Ignoring this recommendation, however, may result in undesirable consequences, if a user agent assumes that repeating the same request is safe when it isn't.

Status codes

In HTTP/1.0 and since, the first line of the HTTP response is called the ''status line'' and includes a numeric ''status code'' (such as "404") and a textual ''reason phrase'' (such as "Not Found"). The way the user agent handles the response primarily depends on the code and secondarily on the response headers. Custom status codes can be used since, if the user agent encounters a code it does not recognize, it can use the first digit of the code to determine the general class of the response.

Also, the standard ''reason phrases'' are only recommendations and can be replaced with "local equivalents" at the web developer's discretion. If the status code indicated a problem, the user agent might display the ''reason phrase'' to the user to provide further information about the nature of the problem. The standard also allows the user agent to attempt to interpret the ''reason phrase'', though this might be unwise since the standard explicitly specifies that status codes are machine-readable and ''reason phrases'' are human-readable.

Persistent connections

In HTTP/0.9 and 1.0, the connection is closed after a single request/response pair. In HTTP/1.1 a keep-alive-mechanism was introduced, where a connection could be reused for more than one request.

Such ''persistent connections'' reduce request latency perceptibly, because the client does not need to re-negotiate the TCP connection after the first request has been sent.

Version 1.1 of the protocol made bandwidth optimization improvements to HTTP/1.0. For example, HTTP/1.1 introduced chunked transfer encoding to allow content on persistent connections to be streamed, rather than buffered. HTTP pipelining further reduces lag time, allowing clients to send multiple requests before a previous response has been received to the first one. Another improvement to the protocol was byte serving, which is when a server transmits just the portion of a resource explicitly requested by a client.

HTTP session state

HTTP is a stateless protocol. A stateless protocol does not require the server to retain information or status about each user for the duration of multiple requests. For example, when a web server is required to customize the content of a web page for a user, the web application may have to track the user's progress from page to page. A common solution is the use of HTTP cookies. Other methods include server side sessions, hidden variables (when the current page is a form), and URL-rewriting using URI-encoded parameters, e.g., /index.php?session_id=some_unique_session_code.

Secure HTTP

There are three methods of establishing a secure HTTP connection: HTTP Secure, Secure Hypertext Transfer Protocol and the HTTP/1.1 Upgrade header. Browser support for the latter two is, however, nearly non-existent, so HTTP Secure is the dominant method of establishing a secure HTTP connection.

Example session

Below is a sample conversation between an HTTP client and an HTTP server running on www.example.com, port 80.

Client request

 GET /index.html HTTP/1.1
 Host: www.example.com

A client request (consisting in this case of the request line and only one header) is followed by a blank line, so that the request ends with a double newline, each in the form of a carriage return followed by a line feed. The "Host" header distinguishes between various DNS names sharing a single IP address, allowing name-based virtual hosting. While optional in HTTP/1.0, it is mandatory in HTTP/1.1.

Server response

 HTTP/1.1 200 OK
 Date: Mon, 23 May 2005 22:38:34 GMT
 Server: Apache/1.3.3.7 (Unix) (Red-Hat/Linux)
 Last-Modified: Wed, 08 Jan 2003 23:11:55 GMT
 Etag: "3f80f-1b6-3e1cb03b"
 Accept-Ranges: bytes
 Content-Length: 438
 Connection: close
 Content-Type: text/html; charset=UTF-8

A server response is followed by a blank line and text of the requested page. The ETag (entity tag) header is used to determine if a cached version of the requested resource is identical to the current version of the resource on the server. ''Content-Type'' specifies the Internet media type of the data conveyed by the http message, while ''Content-Length'' indicates its length in bytes. The HTTP/1.1 webserver publishes its ability to respond to requests for certain byte ranges of the document by setting the header ''Accept-Ranges: bytes''. This is useful, if the client needs to have only certain portions of a resource sent by the server, which is called byte serving. When ''Connection: close'' is sent in a header, it means that the web server will close the TCP connection immediately after the transfer of this response.

Most of the header lines are optional. When ''Content-Length'' is missing the length is determined with other ways. Chunked transfer encoding uses a chunk size of 0 to mark the end of the content. ''Identity'' encoding without ''Content-Length'' reads content until the socket is closed.

A ''Content-Encoding'' like ''gzip'' can be used to reduce the amount of data.

See also

HTTP Replacements or Enhancements

HTTP-MPLEX

HTTP(P2P)

Representational State Transfer (REST)

SPDY - A HTTP enhancement proposed by Google.

Waka (protocol) - A HTTP replacement proposed by Roy Fielding.

Further Information

Basic access authentication

Content negotiation

HTTP compression

Hxxp

Related topics and technologies

Curl-loader - HTTP/S loading/testing open-source SW

Digest access authentication

List of file transfer protocols

List of HTTP headers

List of HTTP status codes

Web cache

WebDAV

References

Further reading

HTTP 0.9 - As Implemented in 1991

External links

A detailed technical history of HTTP. Design Issues by Berners-Lee when he was designing the protocol. list of other classic documents recounting the early protocol history

Category:Application layer protocols Category:Open formats Category:Web browsers Category:World Wide Web Category:World Wide Web Consortium standards

af:HTTP ar:بروتوكول نقل النص الفائق az:HTTP bn:হাইপার টেক্সট ট্রান্সফার প্রোটোকল bs:Hypertext Transfer Protocol bg:HTTP ca:Protocol de transferència d'hipertext cs:Hypertext Transfer Protocol cy:HTTP da:HTTP de:Hypertext Transfer Protocol et:Hüperteksti edastusprotokoll el:Πρωτόκολλο Μεταφοράς Υπερκειμένου es:Hypertext Transfer Protocol eo:Hiperteksto-Transiga Protokolo eu:HTTP fa:پروتکل انتقال ابرمتن fr:Hypertext Transfer Protocol ga:Prótacal Aistrithe Hipirtéacs gl:HTTP ko:HTTP hr:HTTP id:Protokol Transfer Hiperteks is:Hypertext Transfer Protocol it:Hypertext Transfer Protocol he:Hypertext Transfer Protocol kk:HTTP lv:HTTP lb:Hypertext Transfer Protocol lt:HTTP hu:HTTP mk:Протокол за пренос на хипертекст ml:ഹൈപ്പർ ടെക്സ്റ്റ്‌ ട്രാൻസ്ഫർ പ്രോട്ടോകോൾ ms:Protokol Pemindahan Hiperteks nl:Hypertext Transfer Protocol new:एच टी टी पी ja:Hypertext Transfer Protocol no:HTTP nn:Hypertext Transfer Protocol mhr:HTTP pl:Hypertext Transfer Protocol pt:Hypertext Transfer Protocol ro:HTTP ru:HTTP sq:Hypertext Transfer Protocol simple:Hypertext Transfer Protocol sk:Hypertext Transfer Protocol sl:HTTP sr:HTTP sh:HTTP fi:HTTP sv:HTTP tl:HTTP ta:மீயுரை பரிமாற்ற நெறிமுறை te:HTTP (హెచ్‌టిటిపి) th:เอชทีทีพี tr:HTTP uk:HTTP vi:Hypertext Transfer Protocol fiu-vro:HTTP yo:Hypertext Transfer Protocol zh-yue:HTTP diq:HTTP zh:超文本传输协议

Coordinates	45°30′″N73°40′″N
Name	Donnie Williams
Background	solo_singer
Birth name	Donnie Williams
Born	July 26, 1983 (age 28)
Origin	Baton Rouge, Louisiana, Louisiana, United States
Genre	Contemporary R&B;SoulGospelJazz
Occupation(s)	singer-songwriter
Years active	2004–present
Label	Chump Change Records
Associated acts	Latoya London, Ledisi, Fantasia Barrino, Jennifer Hudson
Website	Chump Change Records}}

Donnie Williams is an American soul, gospel and jazz singer-songwriter who in 2004 became a Top 32 Finalist in Season 3 of American Idol. He currently resides in the Bay Area, California.

Early life

He comes from a family of vocalists. His mother, Gladys Williams, performed in clubs around Baton Rouge with legendary soul R&B; singer-pianist Bobby Powell and with blues singer and harmonica blower Raful Neal. Donnie' s father, Eddie McQuarter, is a gospel singer. And the R&B-turned-gospel; singer Beau Williams is a cousin.

Williams made his public performing debut at age 11 at Mount Wade Baptist Church in Baton Rouge with a rendition of the Winans' "He Set Me Free." At school, he and his sister Terrell, won first place in a talent show singing Bobby Brown and Whitney Houston's "Something in Common." He made his nightclub debut at age 15 singing Sam Cooke's "A Change Is Gonna Come" at Raful Neal's blues bar in Baton Rouge.

Before relocating to the Bay Area city of Livermore in 2000 with his mother and his four siblings, Williams made his recording debut singing hooks on a CD by the Baton Rouge hip-hop group Smoke Click. In Oakland, he did likewise for the hip-hop crew Big Bang Theory, with whom he performed locally, including opening a show for E-40.

Career

Donnie was lubing cars at Wal-Mart in Livermore in 2004 when two coworkers overheard him singing as he worked and suggested he try out of for American Idol. One offered to drive him to Pasadena for the audition. They arrived and Williams sang "A Song for You" for judges Simon Cowell and Randy Jackson. Williams was quickly put through to Hollywood after receiving positive commentary from all judges including Cowell.

Williams made it into the Top 32 of American Idol’s Third Season, along with Fantasia Barrino, Jennifer Hudson, and friend LaToya London. Some say he seemed a sure shot for the Top 12 but one night before he was slated to return to Hollywood for the next segment of the reality show, he was invited to a celebration party thrown by friends. He had too much to drink and was arrested on the way home for driving under the influence. News of the arrest traveled fast, and the producers of American Idol kicked him off the show and replaced him with George Huff. Donnie was distraught. He quit drinking and his sobriety is reflected in the ballad "Higher Power" on his debut album Just Like Magic and particularly in the anti-substance abuse message of the video for the song.

In its “Best of the East Bay 2008 issue,” the East Bay Express Newspaper named him "The Best R&B; or Soul Singer" next to Goapele who won “Reader’s Choice Award.” In 2007 The San Francisco Chronicle called him "a soul stylist of the first order" who “might have given Fantasia Barrino some serious competition on "American Idol" if he had not been bounced from the show early in 2004 after a drunken-driving arrest.”

Williams credits Stevie Wonder, Sam Cooke, Ron Isley and Donny Hathaway as influences and also includes gospel singers Marvin Winans and Dorinda Clark-Cole among his favorites. He has sung the national anthem at the NBA Warriors Basketball Game.

Recordings

A few years after being kicked off American Idol he returned with a fresh outlook on life. He hooked up with Park Place band leader and Bay Area based Paul Tillman Smith to begin recording his debut album "Just Like Magic." Smith’s compositions have been recorded in past years by such singers as Phyllis Hyman, Jean Carne, Lady Bianca, Freddie Hughes, Derrick Hughes, Lenny Williams, Rosie Gaines, and the late Prince vocalist Bonnie Boyer. Multi-instrumentalist Nelson Braxton (Frank McComb, Martin Luther, Ledisi, Braxton Brothers) and Norman Connors additionally serve as co-producers of the CD.

Donnie says the lead single "Higher Power" was created to inspire a sense of hope. Guest vocalist LaToya London appears on "Send My Baby Back," a 1968 hit by Berkeley vocalist Freddie Hughes. London additionally materializes in a duet on the title track 'Just Like Magic.' Several songs from "Just Like Magic" are featured in the upcoming film "Tears of a Clown" featuring BET Comedian D.C. Curry which was nominated for “Best Feature Film of the Year” at the Pan African Film Festival.

"Just Like Magic" features Keyboardist and hip-hop MC Kev Choice (Voted by East Bay Express as “The Most Multi-Talented Musician”) and who served as the musical tour director for Lauryn Hill in both 2006 and 2007. On keys Kev Choice has supported such artists as Michael Franti & Spearhead, Goapele, Too Short, Martin Luther, Jennifer Johns, DJ Quik and Zion I. Music can be heard from Keyboardist Sundra Manning who is most well known for her collaborative work alongside Grammy Nominated vocalist Ledisi on the debut album Soulsinger. Other cameos include vocalists Rosie Gaines and Bonnie Boyer (Prince), Keyboardists Michael Stanton, Rodney Franklin & Herman Jackson (musical director for Jessica Simpson, Stevie Wonder, the Isley Brothers and Marvin Gaye) Eric Daniels (musical director for Mariah Carey & Janet Jackson), Sax men Scott Mayo (Earth, Wind and Fire), Vince Lars & Charlie Spikes (Tony Toni Tone), Guitarists Carl Lockett and Tommy Oregon (Janet Jackson), drummer Brian Collier and the Oak Town Horns.

Discography

Albums

''Just Like Magic'', 2009

Singles

"Higher Power" (2009)

References

External links

Official WebSite

Donnie Williams & Park Place

Donnie Williams at MySpace

Category:Living people Category:American soul singers Category:American gospel singers Category:American jazz singers Category:American singer-songwriters Category:1983 births