X-radiation (composed of X-rays) is a form of electromagnetic radiation. X-rays have a wavelength in the range of 0.01 to 10 nanometers, corresponding to frequencies in the range 30 petahertz to 30 exahertz (3×1016 Hz to 3×1019 Hz) and energies in the range 120 eV to 120 keV. They are shorter in wavelength than UV rays and longer than gamma rays. In many languages, X-radiation is called Röntgen radiation, after Wilhelm Conrad Röntgen, who is usually credited as its discoverer, and who had named it X-radiation to signify an unknown type of radiation. Correct spelling of X-ray(s) in the English language includes the variants x-ray(s) and X ray(s). XRAY is used as the phonetic pronunciation for the letter x.
X-rays from about 0.12 to 12 keV (10 to 0.10 nm wavelength) are classified as "soft" X-rays, and from about 12 to 120 keV (0.10 to 0.01 nm wavelength) as "hard" X-rays, due to their penetrating abilities.
Hard X-rays can penetrate solid objects, and their most common use is to take images of the inside of objects in diagnostic radiography and crystallography. As a result, the term ''X-ray'' is metonymically used to refer to a radiographic image produced using this method, in addition to the method itself. By contrast, soft X-rays hardly penetrate matter at all; the attenuation length of 600 eV (~2 nm) X-rays in water is less than 1 micrometer.
The distinction between X-rays and gamma rays has changed in recent decades. Originally, the electromagnetic radiation emitted by X-ray tubes had a longer wavelength than the radiation emitted by radioactive nuclei (gamma rays). Older literature distinguished between X- and gamma radiation on the basis of wavelength, with radiation shorter than some arbitrary wavelength, such as 10−11 m, defined as gamma rays.
However, as shorter wavelength continuous spectrum "X-ray" sources such as linear accelerators and longer wavelength "gamma ray" emitters were discovered, the wavelength bands largely overlapped. The two types of radiation are now usually distinguished by their origin: X-rays are emitted by electrons outside the nucleus, while gamma rays are emitted by the nucleus.
Units of measure and exposure
As
electromagnetic radiation, X-rays follow the following laws:
as a wave, the wavelength
where
is the frequency of the radiation and
is its phase velocity (in a vacuum,
, the speed of light, metres per second);
as a particle, the energy of a
photon is
where
is the frequency and
is
Planck's constant, in units of
electron-volt ·
seconds; combined,
;
The measure of X-rays
ionizing ability is called the exposure:
The coulomb per kilogram (C/kg) is the SI unit of ionizing radiation exposure, and it is the amount of radiation required to create one coulomb of charge of each polarity in one kilogram of matter.
The roentgen (R) is an obsolete traditional unit of exposure, which represented the amount of radiation required to create one electrostatic unit of charge of each polarity in one cubic centimeter of dry air. 1.00 roentgen = 2.58×10−4 C/kg
However, the effect of ionizing radiation on matter (especially living tissue) is more closely related to the amount of energy deposited into them rather than the charge generated. This measure of energy absorbed is called the absorbed dose:
The gray (Gy), which has units of (joules/kilogram), is the SI unit of absorbed dose, and it is the amount of radiation required to deposit one joule of energy in one kilogram of any kind of matter.
The rad is the (obsolete) corresponding traditional unit, equal to 10 millijoules of energy deposited per kilogram. 100 rad = 1.00 gray.
The equivalent dose is the measure of the biological effect of radiation on human tissue. For X-rays it is equal to the absorbed dose.
The sievert (Sv) is the SI unit of equivalent dose, which for X-rays is numerically equal to the gray (Gy).
The Roentgen equivalent man (rem) is the traditional unit of equivalent dose. For X-rays it is equal to the rad or 10 millijoules of energy deposited per kilogram. 1.00 Sv = 100 rem.
Medical X-rays are a significant source of ''man-made'' radiation exposure, accounting for 58% in the United States in 1987, but since most radiation exposure is natural (82%), medical X-rays only account for 10% of ''total'' American radiation exposure.
Reported dosage due to dental X-rays seems to vary significantly. Depending on the source, a typical dental X-ray of a human results in an exposure of perhaps, 3, 40, or as many as 900 mrems (30 to 9,000 μSv).
Sources
+ X-ray K-series spectral line wavelengths (nm) for some common target materials.
|
|
|
! Target
|
! Kβ₁
|
! Kβ₂
|
K-alpha>Kα₁
|
! Kα₂
|
! Fe
|
0.17566
|
0.17442
|
0.193604
|
0.193998
|
! Co
|
0.162079
|
0.160891
|
0.178897
|
0.179285
|
! Ni
|
0.15001
|
0.14886
|
0.165791
|
0.166175
|
! Cu
|
0.139222
|
0.138109
|
0.154056
|
0.154439
|
! Zr
|
0.70173
|
0.68993
|
0.78593
|
0.79015
|
! Mo
|
0.63229
|
0.62099
|
0.70930
|
0.71359
|
There are a number of sources of X-ray radiation. In 2006 in the United States the environment (outer space and the earth) and medical imaging accounted for nearly 50% of exposure each. X-rays can be generated by an X-ray tube, a vacuum tube that uses a high voltage to accelerate the electrons released by a hot cathode to a high velocity. The high velocity electrons collide with a metal target, the anode, creating the X-rays. In medical X-ray tubes the target is usually tungsten or a more crack-resistant alloy of rhenium (5%) and tungsten (95%), but sometimes molybdenum for more specialized applications, such as when soft X-rays are needed as in mammography. In crystallography, a copper target is most common, with cobalt often being used when fluorescence from iron content in the sample might otherwise present a problem.
The maximum energy of the produced X-ray photon is limited by the energy of the incident electron, which is equal to the voltage on the tube, so an 80 kV tube cannot create X-rays with an energy greater than 80 keV. When the electrons hit the target, X-rays are created by two different atomic processes:
#X-ray fluorescence: If the electron has enough energy it can knock an orbital electron out of the inner electron shell of a metal atom, and as a result electrons from higher energy levels then fill up the vacancy and X-ray photons are emitted. This process produces an emission spectrum of X-rays at a few discrete frequencies, sometimes referred to as the spectral lines. The spectral lines generated depend on the target (anode) element used and thus are called characteristic lines. Usually these are transitions from upper shells into K shell (called K lines), into L shell (called L lines) and so on.
#''Bremsstrahlung'': This is radiation given off by the electrons as they are scattered by the strong electric field near the high-''Z'' (proton number) nuclei. These X-rays have a continuous spectrum. The intensity of the X-rays increases linearly with decreasing frequency, from zero at the energy of the incident electrons, the voltage on the X-ray tube.
So the resulting output of a tube consists of a continuous bremsstrahlung spectrum falling off to zero at the tube voltage, plus several spikes at the characteristic lines. The voltages used in diagnostic X-ray tubes, and thus the highest energies of the X-rays, range from roughly 20 to 150 kV.
Both of these X-ray production processes are very inefficient, with a production efficiency of only about one percent, and hence, to produce a usable flux of X-rays, most of the electric power consumed by the tube is released as waste heat. The X-ray tube must be designed to dissipate this excess heat.
In medical diagnostic applications, the low energy (soft) X-rays are unwanted, since they are totally absorbed by the body, increasing the dose. Hence, a thin metal sheet, often of aluminum, called an X-ray filter, is usually placed over the window of the X-ray tube, filtering out the low energy components in the spectrum. This is called ''hardening'' the beam.
Radiographs obtained using X-rays can be used to identify a wide spectrum of pathologies. Because the body structures being imaged in medical applications are large compared to the wavelength of the X-rays, the X-rays can be analyzed as particles rather than waves. (This is in contrast to X-ray crystallography, where their wave-like nature is more important because the wavelength is comparable to the sizes of the structures being imaged.)
To make an X-ray image of human or animal bones, short X-ray pulses illuminate the body or limb, with radiographic film placed behind it. Any bones that are present absorb most of the X-ray photons by photoelectric processes. This is because bones have a higher electron density than soft tissues. Note that bones contain a high percentage of calcium (20 electrons per atom), potassium (19 electrons per atom) magnesium (12 electrons per atom), and phosphorus (15 electrons per atom). The X-rays that pass through the flesh leave a latent image in the photographic film. When the film is developed, the parts of the image corresponding to higher X-ray exposure are dark, leaving a white shadow of bones on the film.
To generate an image of the cardiovascular system, including the arteries and veins (angiography) an initial image is taken of the anatomical region of interest. A second image is then taken of the same region after iodinated contrast material has been injected into the blood vessels within this area. These two images are then digitally subtracted, leaving an image of only the iodinated contrast outlining the blood vessels. The radiologist or surgeon then compares the image obtained to normal anatomical images to determine if there is any damage or blockage of the vessel.
A specialized source of X-rays which is becoming widely used in research is synchrotron radiation, which is generated by particle accelerators. Its unique features are X-ray outputs many orders of magnitude greater than those of X-ray tubes, wide X-ray spectra, excellent collimation, and linear polarization.
Detectors
Photographic plate
The detection of X-rays is based on various methods. The most commonly known methods are
photographic plates,
photographic film in cassettes, and
rare earth screens. Regardless of what is "catching" the image, they are all categorized as "Image Receptors" (IR).
Before the advent of the digital computer and before the invention of digital imaging, photographic plates were used to produce most radiographic images. The images were produced right on the glass plates. Photographic film largely replaced these plates, and it was used in X-ray laboratories to produce medical images. In more recent years, computerized and digital radiography has been replacing photographic film in medical and dental applications, though film technology remains in widespread use in industrial radiography processes (e.g. to inspect welded seams). Photographic plates are mostly things of history, and their replacement, the "intensifying screen", is also fading into history. The metal silver (formerly necessary to the radiographic & photographic industries) is a non-renewable resource. Thus it is beneficial that this is now being replaced by digital (DR) and computed (CR) technology. Where photographic films required wet processing facilities, these new technologies do not. The digital archiving of images utilizing these new technologies also saves storage space.
Since photographic plates are sensitive to X-rays, they provide a means of recording the image, but they also required much X-ray exposure (to the patient), hence intensifying screens were devised. They allow a lower dose to the patient, because the screens take the X-ray information and intensify it so that it can be recorded on film positioned next to the intensifying screen.
The part of the patient to be X-rayed is placed between the X-ray source and the image receptor to produce a shadow of the internal structure of that particular part of the body. X-rays are partially blocked ("attenuated") by dense tissues such as bone, and pass more easily through soft tissues. Areas where the X-rays strike darken when developed, causing bones to appear lighter than the surrounding soft tissue.
Contrast compounds containing barium or iodine, which are radiopaque, can be ingested in the gastrointestinal tract (barium) or injected in the artery or veins to highlight these vessels. The contrast compounds have high atomic numbered elements in them that (like bone) essentially block the X-rays and hence the once hollow organ or vessel can be more readily seen. In the pursuit of a non-toxic contrast material, many types of high atomic number elements were evaluated. For example, the first time the forefathers used contrast it was chalk, and was used on a cadaver's vessels. Unfortunately, some elements chosen proved to be harmful – for example, thorium was once used as a contrast medium (Thorotrast) – which turned out to be toxic in some cases (causing injury and occasionally death from the effects of thorium poisoning). Modern contrast material has improved, and while there is no way to determine who may have a sensitivity to the contrast, the incidence of "allergic-type reactions" are low. (The risk is comparable to that associated with penicillin.)
Photostimulable phosphors
An increasingly common method is the use of
photostimulated luminescence (PSL), pioneered by Fuji in the 1980s. In modern hospitals a
photostimulable phosphor plate (PSP plate) is used in place of the photographic plate. After the plate is X-rayed, excited electrons in the phosphor material remain 'trapped' in 'colour centres' in the crystal lattice until stimulated by a laser beam passed over the plate surface. The
light given off during laser stimulation is collected by a
photomultiplier tube and the resulting signal is converted into a digital image by computer technology, which gives this process its common name,
computed radiography (also referred to as
digital radiography). The PSP plate can be reused, and existing X-ray equipment requires no modification to use them.
Geiger counter
Initially, most common detection methods were based on the
ionization of gases, as in the
Geiger-Müller counter: a sealed volume, usually a cylinder, with a mica, polymer or thin metal window contains a gas, a cylindrical
cathode and a wire
anode; a high voltage is applied between the cathode and the anode. When an X-ray photon enters the cylinder, it ionizes the gas and forms ions and electrons. Electrons accelerate toward the anode, in the process causing further ionization along their trajectory. This process, known as a
Townsend avalanche, is detected as a sudden current, called a "count" or "event".
In order to gain energy spectrum information, a diffracting crystal may be used to first separate the different photons. The method is called wavelength dispersive X-ray spectroscopy (WDX or WDS). Position-sensitive detectors are often used in conjunction with dispersive elements. Other detection equipment that is inherently energy-resolving may be used, such as the aforementioned proportional counters. In either case, use of suitable pulse-processing (MCA) equipment allows digital spectra to be created for later analysis.
For many applications, counters are not sealed but are constantly fed with purified gas, thus reducing problems of contamination or gas aging. These are called "flow counters".
Scintillators
Some materials such as
sodium iodide (NaI) can "convert" an X-ray photon to a visible photon; an electronic detector can be built by adding a
photomultiplier. These detectors are called "
scintillators", filmscreens or "
scintillation counters". The main advantage of using these is that an adequate image can be obtained while subjecting the patient to a much lower dose of X-rays.
Image intensification
X-rays are also used in "real-time" procedures such as angiography or contrast studies of the hollow organs (e.g. barium enema of the small or large intestine) using fluoroscopy acquired using an X-ray image intensifier. Angioplasty, medical interventions of the arterial system, rely heavily on X-ray-sensitive contrast to identify potentially treatable lesions.
Direct semiconductor detectors
Since the 1970s, new
semiconductor detectors have been developed (
silicon or
germanium doped with
lithium, Si(Li) or Ge(Li)). X-ray photons are converted to electron-hole pairs in the semiconductor and are collected to detect the X-rays. When the temperature is low enough (the detector is cooled by
Peltier effect or even cooler
liquid nitrogen), it is possible to directly determine the X-ray energy spectrum; this method is called
energy dispersive X-ray spectroscopy (EDX or EDS); it is often used in small
X-ray fluorescence spectrometers. These detectors are sometimes called "
solid state detectors". Detectors based on
cadmium telluride (
CdTe) and its alloy with
zinc,
cadmium zinc telluride, have an increased sensitivity, which allows lower doses of X-rays to be used.
Practical application in medical imaging started in the 1990s. Currently amorphous selenium is used in commercial large area flat panel X-ray detectors for mammography and chest radiography. Current research and development is focused around pixel detectors, such as CERN's energy resolving Medipix detector.
Note: A standard semiconductor diode, such as a 1N4007, will produce a small amount of current when placed in an X-ray beam. A test device once used by Medical Imaging Service personnel was a small project box that contained several diodes of this type in series, which could be connected to an oscilloscope as a quick diagnostic.
Silicon drift detectors (SDDs), produced by conventional semiconductor fabrication, now provide a cost-effective and high resolving power radiation measurement. Unlike conventional X-ray detectors, such as Si(Li)s, they do not need to be cooled with liquid nitrogen.
Scintillator plus semiconductor detectors
With the advent of large semiconductor array detectors it has become possible to design detector systems using a scintillator screen to convert from X-rays to visible light which is then converted to electrical signals in an array detector. Indirect
Flat Panel Detectors (FPDs) are in widespread use today in medical, dental, veterinary and industrial applications.
The array technology is a variant on the amorphous silicon TFT arrays used in many flat panel displays, like the ones in computer laptops. The array consists of a sheet of glass covered with a thin layer of silicon that is in an amorphous or disordered state. At a microscopic scale, the silicon has been imprinted with millions of transistors arranged in a highly ordered array, like the grid on a sheet of graph paper. Each of these thin film transistors (TFTs) is attached to a light-absorbing photodiode making up an individual pixel (picture element). Photons striking the photodiode are converted into two carriers of electrical charge, called electron-hole pairs. Since the number of charge carriers produced will vary with the intensity of incoming light photons, an electrical pattern is created that can be swiftly converted to a voltage and then a digital signal, which is interpreted by a computer to produce a digital image. Although silicon has outstanding electronic properties, it is not a particularly good absorber of X-ray photons. For this reason, X-rays first impinge upon scintillators made from e.g. gadolinium oxysulfide or caesium iodide. The scintillator absorbs the X-rays and converts them into visible light photons that then pass onto the photodiode array.
Visibility
While generally considered invisible to the human eye, in special circumstances X-rays can be visible. Brandes, in an experiment a short time after
Röntgen's landmark 1895 paper, reported after dark adaptation and placing his eye close to an X-ray tube, seeing a faint "blue-gray" glow which seemed to originate within the eye itself. Upon hearing this, Röntgen reviewed his record books and found he too had seen the effect. When placing an X-ray tube on the opposite side of a wooden door Röntgen had noted the same blue glow, seeming to emanate from the eye itself, but thought his observations to be spurious because he only saw the effect when he used one type of tube. Later he realized that the tube which had created the effect was the only one powerful enough to make the glow plainly visible and the
experiment was thereafter readily repeatable. The knowledge that X-rays are actually faintly visible to the dark-adapted naked eye has largely been forgotten today; this is probably due to the desire not to repeat what would now be seen as a recklessly dangerous and potentially harmful experiment with
ionizing radiation. It is not known what exact mechanism in the eye produces the visibility: it could be due to conventional detection (excitation of
rhodopsin molecules in the retina), direct excitation of retinal nerve cells, or secondary detection via, for instance, X-ray induction of
phosphorescence in the eyeball with conventional retinal detection of the secondarily produced visible light.
Though X-rays are otherwise invisible it is possible to see the ionization of the air molecules if the intensity of the X-ray beam is high enough. The beamline from the wiggler at the ID11 at ESRF is one example of such high intensity.
Medical uses
Since Röntgen's discovery that X-rays can identify bone structures, X-rays have been use for medical imaging. The first medical use was less than a month after his paper on the subject. In 2010, 5 billion medical imaging studies were done worldwide. Radiation exposure from medical imaging in 2006 made up about 50% of total ionizing radiation exposure in the United States.
Plain X-rays
X-rays are useful in the detection of pathology of the
skeletal system as well as for detecting some disease processes in
soft tissue. Some notable examples are the very common
chest X-ray, which can be used to identify lung diseases such as
pneumonia,
lung cancer or
pulmonary edema, and the
abdominal X-ray, which can detect
intestinal obstruction, free air (from visceral perforations) and free fluid (in
ascites). X-rays may also be used to detect pathology such as
gallstones (which are rarely
radiopaque) or
kidney stones which are often (but not always) visible. Traditional plain X-rays are less useful in the imaging of soft tissues such as the
brain or
muscle. X-rays are also commonly used in dentistry, as X-ray imaging is useful in the diagnoses of common oral problems, such as
cavities.
Computer tomography
Imaging alternatives for soft tissues are
computed axial tomography (CAT or CT scanning).
Fluoroscopy
Fluoroscopy is another X-ray test methodology. This method may use a contrast material. Examples include cardiac catheterization (to examine for
coronary artery blockages) and Barium swallow (to examine for
esophageal disorders).
Radiotherapy
The use of X-rays as a treatment is known as
radiation therapy and is largely used for the management (including
palliation) of
cancer; it requires higher radiation energies than for imaging alone.
Health risks
Diagnostic X-rays (primarily from CT scans due to the large dose used) increase the risk of developmental problems and cancer in those exposed. X rays are classified as a carcinogen by both the World Health Organization's International Agency for Research on Cancer and the U.S. government. It is estimated that 0.4% of current cancers in the United States are due to computed tomography (CT scans) performed in the past and that this may increase to as high as 1.5-2% with 2007 rates of CT usage.
Experimental and epidemiological data, currently do not support the proposition that there is a threshold dose of radiation below which there is no increased risk of cancer. However, this is under increasing doubt. It is estimated that the additional radiation will increase a person's cumulative risk of getting cancer by age 75 by 0.6–1.8%. The amount of absorbed radiation depends upon the type of X-ray test and the body part involved. CT and fluoroscopy entail higher doses of radiation than do plain X-rays.
To place the increased risk in perspective, a plain chest X-ray or dental X-ray will expose a person to the same amount from background radiation that we are exposed to (depending upon location) everyday over 10 days. Each such X-ray would add less than 1 per 1,000,000 to the lifetime cancer risk. An abdominal or chest CT would be the equivalent to 2–3 years of background radiation, increasing the lifetime cancer risk between 1 per 1,000 to 1 per 10,000. For instance, the effective dose to the torso from a CT scan of the chest is about 5 mSv. This is compared to the roughly 40% chance of a US citizen developing cancer during their lifetime. Accurate estimation of effective doses due to CT is difficult with the estimation uncertainty range of about ±19% to ±32% for adult head scans depending upon the method used.
Fathers exposed to diagnostic X-rays are more likely to have infants who contract leukemia, especially if exposure is closer to conception or includes two or more X-rays of the lower gastrointestinal (GI) tract or lower abdomen.
The risk of radiation is greater to unborn babies, so in pregnant patients, the benefits of the investigation (X-ray) should be balanced with the potential hazards to the unborn fetus. In the US, there are an estimated 62 million CT scans performed annually, including more than 4 million on children. Avoiding unnecessary X-rays (especially CT scans) will reduce radiation dose and any associated cancer risk.
Shielding
!X-rays generated by peak voltages below !Minimum thickness of lead
|
75 kV |
1.0 mm
|
100 kV |
1.5 mm
|
125 kV |
2.0 mm
|
150 kV |
2.5 mm
|
175 kV |
3.0 mm
|
200 kV |
4.0 mm
|
225 kV |
5.0 mm
|
300 kV |
9.0 mm
|
400 kV |
15.0 mm
|
500 kV |
22.0 mm
|
600 kV |
34.0 mm
|
900 kV |
51.0 mm
|
Lead is the most common shield against X-rays because of its high density (11340 kg/m
3), stopping power, ease of installation and low cost. The maximum range of a high-energy photon such as an X-ray in matter is infinite; at every point in the matter traversed by the photon, there is a probability of interaction. Thus there is a very small probability of no interaction over very large distances. The shielding of photon beam is therefore exponential (with an
attenuation length being close to the
radiation length of the material); doubling the thickness of shielding will square the shielding effect.
The following table shows the recommended thickness of lead shielding in function of X-ray energy, from the Recommendations by the Second International Congress of Radiology.
Other uses
Other notable uses of X-rays include
X-ray crystallography in which the pattern produced by the
diffraction of X-rays through the closely spaced lattice of atoms in a crystal is recorded and then analysed to reveal the nature of that lattice. A related technique,
fiber diffraction, was used by
Rosalind Franklin to discover the
double helical structure of
DNA.
X-ray astronomy, which is an observational branch of astronomy, which deals with the study of X-ray emission from celestial objects.
X-ray microscopic analysis, which uses electromagnetic radiation in the soft X-ray band to produce images of very small objects.
X-ray fluorescence, a technique in which X-rays are generated within a specimen and detected. The outgoing energy of the X-ray can be used to identify the composition of the sample.
Industrial radiography uses X-rays for inspection of industrial parts, particularly welds.
Paintings are often X-rayed to reveal the underdrawing and pentimenti or alterations in the course of painting, or by later restorers. Many pigments such as lead white show well in X-ray photographs.
X-ray spectromicroscopy has been used to analyse the reactions of pigments in paintings. For example, in analysing colour degradation in the paintings of
van Gogh
Airport security luggage scanners use X-rays for inspecting the interior of luggage for security threats before loading on aircraft.
Border control truck scanners use X-rays for inspecting the interior of trucks.
X-ray fine art photography
X-ray
hair removal, a method popular in the 1920s but now banned by the FDA.
Roentgen Stereophotogrammetry is used to track movement of bones based on the implantation of markers
X-ray photoelectron spectroscopy is a chemical analysis technique relying on the photoelectric effect, usually employed in surface science.
History
Discovery
German physicist
Wilhelm Röntgen is usually credited as the discoverer of X-rays because he was the first to systematically study them, though he is not the first to have observed their effects. He is also the one who gave them the name "X-rays", though many referred to these as "Röntgen rays" for several decades after their discovery and to this day in some languages, including Röntgen's native
German.
X-rays were found emanating from Crookes tubes, experimental discharge tubes invented around 1875, by scientists investigating the cathode rays, that is energetic electron beams, that were first created in the tubes. Crookes tubes created free electrons by ionization of the residual air in the tube by a high DC voltage of anywhere between a few kilovolts and 100 kV. This voltage accelerated the electrons coming from the cathode to a high enough velocity that they created X-rays when they struck the anode or the glass wall of the tube. Many of the early Crookes tubes undoubtedly radiated X-rays, because early researchers noticed effects that were attributable to them, as detailed below. Wilhelm Röntgen was the first to systematically study them, in 1895.
The important early researchers in X-rays were Ivan Pulyui, William Crookes, Johann Wilhelm Hittorf, Eugen Goldstein, Heinrich Hertz, Philipp Lenard, Hermann von Helmholtz, Nikola Tesla, Thomas Edison, Charles Glover Barkla, Max von Laue, and Wilhelm Conrad Röntgen.
Johann Hittorf
German physicist
Johann Hittorf (1824–1914), a co-inventor and early researcher of the Crookes tube, found when he placed unexposed
photographic plates near the tube, that some of them were flawed by shadows, though he did not investigate this effect.
Ivan Pulyui
In 1877
Ukrainian-born
Pulyui, a lecturer in experimental physics at the
University of Vienna, constructed various designs of
vacuum discharge tube to investigate their properties. He continued his investigations when appointed professor at the
Prague Polytechnic and in 1886 he found that sealed photographic plates became dark when exposed to the emanations from the tubes. Early in 1896, just a few weeks after
Röntgen published his first X-ray photograph, Pulyui published high-quality X-ray images in journals in Paris and London. Although Pulyui had studied with Röntgen at the
University of Strasbourg in the years 1873–75, his biographer Gaida (1997) asserts that his subsequent research was conducted independently.
Nikola Tesla
In April 1887,
Nikola Tesla began to investigate X-rays using high voltages and tubes of his own design, as well as
Crookes tubes. From his technical publications, it is indicated that he invented and developed a special single-electrode X-ray tube, which differed from other X-ray tubes in having no target electrode. The principle behind Tesla's device is called the
Bremsstrahlung process, in which a high-energy secondary X-ray emission is produced when charged particles (such as electrons) pass through matter. By 1892, Tesla performed several such experiments, but he did not categorize the emissions as what were later called X-rays. Tesla generalized the phenomenon as
radiant energy of "invisible" kinds. Tesla stated the facts of his methods concerning various experiments in his 1897 X-ray lecture before the
New York Academy of Sciences. Also in this lecture, Tesla stated the method of construction and safe operation of X-ray equipment. His X-ray experimentation by vacuum high field emissions also led him to alert the scientific community to the biological hazards associated with X-ray exposure.
Fernando Sanford
X-rays were generated and detected by
Fernando Sanford (1854–1948), the foundation Professor of Physics at
Stanford University, in 1891. From 1886 to 1888 he had studied in the
Hermann Helmholtz laboratory in Berlin, where he became familiar with the cathode rays generated in vacuum tubes when a voltage was applied across separate electrodes, as previously studied by
Heinrich Hertz and
Philipp Lenard. His letter of January 6, 1893 (describing his discovery as "electric photography") to The
Physical Review was duly published and an article entitled ''Without Lens or Light, Photographs Taken With Plate and Object in Darkness'' appeared in the
San Francisco Examiner.
Philipp Lenard
Philipp Lenard, a student of Heinrich Hertz, wanted to see whether cathode rays could pass out of the Crookes tube into the air. He built a Crookes tube (later called a "Lenard tube") with a "window" in the end made of thin aluminum, facing the cathode so the cathode rays would strike it. He found that something came through, that would expose photographic plates and cause fluorescence. He measured the penetrating power of these rays through various materials. It has been suggested that at least some of these "Lenard rays" were actually X-rays.
Hermann von Helmholtz formulated mathematical equations for X-rays. He postulated a dispersion theory before Röntgen made his discovery and announcement. It was formed on the basis of the electromagnetic theory of light. However, he did not work with actual X-rays.
Wilhelm Röntgen
On November 8, 1895, German physics professor Wilhelm Röntgen stumbled on X-rays while experimenting with Lenard and Crookes tubes and began studying them. He wrote an initial report "''On a new kind of ray: A preliminary communication''" and on December 28, 1895 submitted it to the Würzburg's Physical-Medical Society journal. This was the first paper written on X-rays. Röntgen referred to the radiation as "X", to indicate that it was an unknown type of radiation. The name stuck, although (over Röntgen's great objections) many of his colleagues suggested calling them Röntgen rays. They are still referred to as such in many languages, including German and Russian and Japanese. Röntgen received the first Nobel Prize in Physics for his discovery.
There are conflicting accounts of his discovery because Röntgen had his lab notes burned after his death, but this is a likely reconstruction by his biographers: Röntgen was investigating cathode rays with a fluorescent screen painted with barium platinocyanide and a Crookes tube which he had wrapped in black cardboard so the visible light from the tube wouldn't interfere. He noticed a faint green glow from the screen, about 1 meter away. He realized some invisible rays coming from the tube were passing through the cardboard to make the screen glow. He found they could also pass through books and papers on his desk. Röntgen threw himself into investigating these unknown rays systematically. Two months after his initial discovery, he published his paper.
Röntgen discovered its medical use when he made a picture of his wife's hand on a photographic plate formed due to X-rays. The photograph of his wife's hand was the first ever photograph of a human body part using X-rays. When she saw the picture, she said "I have seen my death."
Thomas Edison
In 1895,
Thomas Edison investigated materials' ability to fluoresce when exposed to X-rays, and found that
calcium tungstate was the most effective substance. Around March 1896, the
fluoroscope he developed became the standard for medical X-ray examinations. Nevertheless, Edison dropped X-ray research around 1903 after the death of
Clarence Madison Dally, one of his glassblowers. Dally had a habit of testing X-ray tubes on his hands, and acquired a
cancer in them so tenacious that both arms were
amputated in a futile attempt to save his life. At the 1901 Pan-American Exposition in Buffalo, New York, an assassin
shot President William McKinley twice at close range with a .32 caliber revolver. The first bullet was removed but the second remained lodged somewhere in his stomach. One of the exhibits at the exposition was Edison's new X-ray machine which he offered the use during McKinley's surgery. The offer was declined because the X-ray machine had not been tested and approved at this point. McKinley survived for some time and requested that Thomas Edison "rush an
X-ray machine to Buffalo to find the stray bullet. It arrived, but was not used as McKinley died of septic shock due to bacterial infection."
Russell Reynolds
Having heard of Wilhelm Röntgen's discovery, and whilst still at Winchester School, England, Russel Reynolds made an X-ray set in 1896.
Having been made only the year after the discovery of the phenomenon, the X-ray set is considered one of the worlds oldest and was donated to the
London Science Museum, UK in 1938, where it can still be seen. In 2009 the British public voted the X-ray machine
the most important modern discovery". Dr. Russell Reynolds died in 1964 in his 85th year, he was considered one of British radiology's "most distinguished seniors".
Frank Austin and the Frost brothers
The first medical X-ray made in the United States was obtained using a discharge tube of Pulyui's design. In January 1896, on reading of Röntgen's discovery, Frank Austin of
Dartmouth College tested all of the discharge tubes in the physics laboratory and found that only the Pulyui tube produced X-rays. This was a result of Pulyui's inclusion of an oblique "target" of
mica, used for holding samples of
fluorescent material, within the tube. On 3 February 1896 Gilman Frost, professor of medicine at the college, and his brother Edwin Frost, professor of physics, exposed the wrist of Eddie McCarthy, whom Edwin had treated some weeks earlier for a fracture, to the X-rays and collected the resulting image of the broken bone on
gelatin photographic plates obtained from Howard Langill, a local photographer also interested in Röntgen's work.
20th century and beyond
The many applications of X-rays immediately generated enormous interest. Workshops began making specialized versions of Crookes tubes for generating X-rays and these first generation cold cathode or Crookes X-ray tubes were used until about 1920.
Crookes tubes were unreliable. They had to contain a small quantity of gas (invariably air) as a current will not flow in such a tube if they are fully evacuated. However as time passed the X-rays caused the glass to absorb the gas, causing the tube to generate "harder" X-rays until it soon stopped operating. Larger and more frequently used tubes were provided with devices for restoring the air, known as "softeners". These often took the form of a small side tube which contained a small piece of mica: a substance that traps comparatively large quantities of air within its structure. A small electrical heater heated the mica and caused it to release a small amount of air, thus restoring the tube's efficiency. However the mica had a limited life and the restore process was consequently difficult to control.
In 1904, John Ambrose Fleming invented the thermionic diode valve (vacuum tube). This used a hot cathode which permitted current to flow in a vacuum. The idea was quickly applied to X-ray tubes and thus heated cathode X-ray tubes, called Coolidge tubes, replaced the troublesome cold cathode tubes by about 1920.
Two years later, physicist Charles Barkla discovered that X-rays could be scattered by gases and that each element had a characteristic X-ray. He won the 1917 Nobel Prize in Physics for this discovery. Max von Laue, Paul Knipping and Walter Friedrich observed for the first time the diffraction of X-rays by crystals in 1912. This discovery, along with the early works of Paul Peter Ewald, William Henry Bragg and William Lawrence Bragg gave birth to the field of X-ray crystallography. The Coolidge tube was invented the following year by William D. Coolidge which permitted continuous production of X-rays; this type of tube is still in use today.
The use of X-rays for medical purposes (to develop into the field of radiation therapy) was pioneered by Major John Hall-Edwards in Birmingham, England. In 1908, he had to have his left arm amputated owing to the spread of X-ray dermatitis. The X-ray microscope was invented in the 1950s.
The Chandra X-ray Observatory, launched on July 23, 1999, has been allowing the exploration of the very violent processes in the universe which produce X-rays. Unlike visible light, which is a relatively stable view of the universe, the X-ray universe is unstable, it features stars being torn apart by black holes, galactic collisions and novas or neutron stars that build up layers of plasma that then explode into space.
An X-ray laser device was proposed as part of the Reagan Administration's Strategic Defense Initiative in the 1980s, but the first and only test of the device (a sort of laser "blaster", or death ray, powered by a thermonuclear explosion) gave inconclusive results. For technical and political reasons, the overall project (including the X-ray laser) was de-funded (though was later revived by the second Bush Administration as National Missile Defense using different technologies).
See also
Backscatter X-ray
Detective quantum efficiency
High energy X-rays
Industrial CT scanning
N ray
Neutron radiation
Radiologic technologist
Resonant inelastic X-ray scattering (RIXS)
Small angle X-ray scattering (SAXS)
X-ray absorption spectroscopy
X-ray generation
X-ray marker
X-ray nanoprobe
X-ray optics
X-ray reflectivity
X-ray vision
X-ray welding
Notes
External links
Historical X-ray tubes
Example Radiograph: Fractured Humerus
A Photograph of an X-ray Machine
X-ray Safety
An X-ray tube demonstration (Animation)
1896 Article: "On a New Kind of Rays"
"Digital X-Ray Technologies Project"
What is Radiology? a simple tutorial
50,000 X-ray, MRI, and CT pictures MedPix medical image database
Index of Early Bremsstrahlung Articles
Extraordinary X-Rays – slideshow by ''Life magazine''
Category:Electromagnetic spectrum
Category:IARC Group 1 carcinogens
Category:Medical physics
Category:Radiography
Category:Ukrainian inventions
ar:أشعة سينية
ast:Rayos X
az:Rentgen şüaları
bn:রঞ্জন রশ্মি
bs:Rendgensko zračenje
br:Skinoù X
bg:Рентгеново лъчение
ca:Raigs X
cs:Rentgenové záření
cy:Pelydr-X
da:Røntgenstråling
de:Röntgenstrahlung
el:Ακτίνες Χ
es:Rayos X
eo:Ikso-radioj
eu:X izpi
fa:پرتوی ایکس
hif:X-ray
fr:Rayon X
gl:Raios X
gan:X光
gu:ક્ષ-કિરણો
ko:엑스선
hi:ऍक्स किरण
hr:Rendgenske zrake
id:Sinar-X
iu:ᑕᕋᖅᑑᑦ/taraqtuut
is:Röntgengeislun
it:Raggi X
he:קרני רנטגן
jv:Sinar-X
kn:ಕ್ಷ-ಕಿರಣ
kk:Рентген сәулелері
ht:Reyon X
lbe:Рентгендалул тIинтту
lv:Rentgenstari
lt:Rentgeno spinduliai
lij:Raggi x
hu:Röntgensugárzás
mk:Рентгенски зраци
ml:എക്സ് കിരണം
mr:क्ष-किरण
ms:Sinar-X
my:အိတ်ဇ်ရေး
nl:Röntgenstraling
ja:X線
no:Røntgenstråling
nn:Røntgenstråling
oc:Rais X
om:X-rays
pnb:ایکس رے
pl:Promieniowanie rentgenowskie
pt:Raios X
ro:Radiație X
ru:Рентгеновское излучение
scn:Raggi X
si:එක්ස් කිරණ
simple:X-ray
sk:Röntgenové žiarenie
sl:Rentgenski žarki
sr:Рендгенски зраци
sh:X-zrake
su:Sinar X
fi:Röntgensäteily
sv:Röntgenstrålning
tl:Rayo ekis
ta:எக்சு-கதிர்
tt:Рентген нурланышы
te:ఎక్స్-రే
th:รังสีเอกซ์
tr:X-ray
uk:Рентгенівське випромінювання
ur:ایکس شعاع
ug:X نۇرى
vi:Tia X
war:Rayos-ekis
yi:רענטגען שטראלן
bat-smg:Rentgena spėndolē
zh:X射线