In professional audio, a mixing console, or audio mixer, also called a sound board, mixing desk, or mixer is an electronic device for combining (also called "mixing"), routing, and changing the level, timbre and/or dynamics of audio signals. A mixer can mix analog or digital signals, depending on the type of mixer. The modified signals (voltages or digital samples) are summed to produce the combined output signals.

Mixing consoles are used in many applications, including recording studios, public address systems, sound reinforcement systems, broadcasting, television, and film post-production. An example of a simple application would be to enable the signals that originated from two separate microphones (each being used by vocalists singing a duet, perhaps) to be heard through one set of speakers simultaneously. When used for live performances, the signal produced by the mixer will usually be sent directly to an amplifier, unless that particular mixer is "powered" or it is being connected to powered speakers.

Structure

A typical analog mixing board has three sections:

Channel inputs

Master controls

Audio level metering

The channel input strips are usually a bank of identical monaural or stereo input channels. The master control section has sub-group faders, master faders, master auxiliary mixing bus level controls and auxiliary return level controls. In addition it may have solo monitoring controls, a stage talk-back microphone control, muting controls and an output matrix mixer. On smaller mixers the inputs are on the left of the mixing board and the master controls are on the right. In larger mixers, the master controls are in the center with inputs on both sides. The audio level meters may be above the input and master sections or they may be integrated into the input and master sections themselves

Channel input strip

The input strip is usually separated into these sections:

Input jacks

Microphone preamplifiers

equalization

Dynamics processing (e.g. dynamic range compression, gating)

Routing including direct outs, aux-sends, panning control and subgroup assignments

Input Faders

On many consoles, these sections are color coded for quick identification by the operator. Each signal that is input into the mixer has its own ''channel''. Depending on the specific mixer, each channel is stereo or monaural. On most mixers, each channel has an XLR input, and many have RCA or quarter-inch TRS connector line inputs.

Basic input controls

Below each input, there are usually several rotary controls (knobs, pots). The first is typically a ''trim'' or ''gain'' control. The inputs buffer the signal from the external device and this controls the amount of amplification or attenuation needed to bring the signal to a nominal level for processing. This stage is where most noise of interference is picked up, due to the high gains involved (around +50 dB, for a microphone). Balanced inputs and connectors, such as XLR or TRS connectors, reduce interference problems.

There may be insert points after the buffer/gain stage, which send to and return from external processors which should only affect the signal of that particular channel. Effects that operate on multiple channels are connected to the auxiliary sends (below).

Auxiliary send routing

The ''auxiliary send'' routes a split of the incoming signal to an auxiliary bus which can then be used with external devices. ''Auxiliary sends'' can either be pre-fader or post-fader, in that the level of a pre-fade send is set by the ''auxiliary send'' control, whereas post-fade sends depend on the position of the channel fader as well. ''Auxiliary sends'' can be used to send the signal to an external processor such as a reverb, which can then be routed back through another channel or designated auxiliary returns on the mixer. These will normally be post-fader. Pre-fade ''auxiliary sends'' can be used to provide a monitor mix to musicians onstage; this mix is thus independent of the main mix.

Channel equalization

Further channel controls affect the equalization of the signal by separately attenuating or boosting a range of frequencies, e.g., bass, midrange, and treble. Many mixing consoles have a parametric equalizer on each channel. Some mixers have a general equalization control (either graphic or parametric) at the output.

Subgroup and mix routing

Each channel on a mixer has a sliding volume control (''fader'') that allows adjustment of the level of that channel. The signals are summed to create the main ''mix'', or combined on a ''bus'' as a submix, a group of channels that are then added to get the final mix (for instance, many drum mics could be grouped into a bus, and then the proportion of drums in the final mix can be controlled with one bus fader).

There may also be insert points for a certain bus, or even the entire mix.

Master output controls

Subgroup and main output fader controls are often found together on the right hand side of the mixer or, on larger consoles, in a center section flanked by banks of input channels. Matrix routing is often contained in this master section, as are headphone and local loudspeaker monitoring controls. Talkback controls allow conversation with the artist through their monitors, headphones or in-ear monitor. A test tone generator might be located in the master output section. Aux returns such as those signals returning from external processors are often in the master section.

Metering

Finally, there are usually one or more VU or peak meters to indicate the levels for each channel, for the master outputs and to indicate whether the console levels are clipping the signal. Most mixers have at least one additional output, besides the main mix. These are either individual bus outputs, or ''auxiliary outputs'', used, for instance, to output a different mix to on-stage monitors.

As audio is heard in a logarithmic fashion (both amplitude and frequency), mixing console controls and displays are almost always in decibels, a logarithmic measurement system. Since it is a relative measurement, and not a unit itself, the meters must be referenced to a nominal level. The "professional" nominal level is considered to be +4 dBu. The "consumer grade" level is −10 dBV.

Hardware routing and patching

For convenience, some mixing consoles include inserts or a patch bay or patch panel. Patch bays are mainly used for recording mixers.

Other features

Most, but not all, audio mixers can

add external effects.

use monaural signals to produce stereo sound through pan and balance controls.

provide phantom power required by some microphones.

Some mixers can

create an audible tone via an oscillator.

add effects internally.

read and write console automation.

be interfaced with computers or other recording equipment (to control the mixer with computer presets, for instance).

control or be controlled by a digital audio workstation via MIDI or proprietary commands.

be powered by batteries.

Digital versus analog

Digital mixing console sales have increased dramatically since their introduction in the 1990s. Yamaha sold more than 1000 PM5D mixers by July, 2005, and other manufacturers are seeing increasing sales of their digital products. Digital mixers are more versatile than analog ones and offer many new features, such as reconfigure signal routing at the touch of a button. In addition, digital consoles often include a range of special effects such as parametric EQ, compression, gating, reverb, automatic feedback reduction, tap delay and straight delay. Some products are expandable via third-party software features (called plugins) that add further reverb, compression, delay and tone-shaping tools. Several digital mixers include spectrograph and real time analyzer functions. A few incorporate loudspeaker management tools such as crossover filtering and limiting. Digital signal processing can perform automatic mixing for some simple applications, such as courtrooms, conferences and panel discussions, but at this time no digital mixer in live audio includes automixing. Consoles with motorized faders can read and write console automation.

Digital circuitry is more resistant to outside interference from radio transmitters such as walkie-talkies and cell phones.

Propagation delay

Digital mixers have an unavoidable amount of latency or propagation delay, ranging from 1.5 ms to as much as 10 ms, depending on the model of digital mixer and what functions are engaged. This small amount of delay isn't a problem for loudspeakers aimed at the audience or even monitor wedges aimed at the artist, but can be disorienting and unpleasant for IEMs (In ear monitors) where the artist hears their voice acoustically in their head ''and'' electronically amplified in their ears but delayed by a couple of milliseconds.

Every analog to digital conversion and digital to analog conversion within a digital mixer entails propagation delay. Audio inserts to favorite external analog processors make for almost double the usual delay. Further delay can be traced to format conversions such as from ADAT to AES3 and from normal digital signal processing steps.

Within a digital mixer there can be differing amounts of latency, depending on the routing and on how much DSP is in use. Assigning a signal to two parallel paths with significantly different processing on each path can result in extreme comb filtering when recombined. Some digital mixers incorporate internal methods of latency correction so that such problems are avoided.

Ease of use

Analog consoles remain popular due to their continuing to have one knob, fader or button per function, a reassuring feature for the user. This takes up more physical space but allows more rapid response to changing performance conditions. Most digital mixers take advantage of the technology to reduce the physical space requirements of their product, entailing compromises in user interface such as a single shared channel adjustment area that is selectable for only one channel at a time. Additionally, most digital mixers have virtual pages or layers which change the fader banks into separate controls for additional inputs or for adjusting equalization or aux send levels. This layering can be confusing for operators.

Analog consoles make for simpler understanding of hardware routing. Many digital mixers allow internal reassignment of inputs so that convenient groupings of inputs appear near each other at the fader bank, a feature that can be disorienting for persons having to make a hardware patch change.

On the other hand, many digital mixers allow for extremely easy building of a mix from saved data. USB flash drives and other storage methods are employed to bring past performance data to a new venue in highly portable manner. At the new venue, the traveling mix technician simply plugs the collected data into the venue's digital mixer and quickly makes small adjustments to the local input and output patch layout, allowing for full show readiness in very short order.

Some digital mixers allow offline editing of the mix, a feature that lets the traveling technician use a laptop to make anticipated changes to the show while ''en route'', further shortening the time it takes for the sound system to be ready for the artist.

Sound quality

Both digital and analog mixers rely on analog microphone preamplifiers, a high-gain circuit that is the origin of much of the perceived character of sound quality in an audio mixer. In this respect, both formats are on par with each other. In a digital mixer, the microphone preamplifier is followed by an ADC which quantizes the audio stream. Ideally, this process is carefully engineered to deal gracefully with overloading and clipping while delivering an accurate digital stream over the linear dynamic range. Further processing and mixing of digital streams within a mixer need to avoid clipping and truncation if maximum audio quality is desired.

Analog mixers, too, must deal gracefully with overloading and clipping at the microphone preamplifier and as well as avoiding overloading of mix buses. Background hiss in an analog mixer is always present, though good gain stage management minimizes its audibility. Idle subgroups left "up" in a mix will add their background hiss to the main outputs; many digital mixers avoid this problem by low-level gating.

Many electronic design elements combine to affect perceived sound quality, making the global "analog mixer vs. digital mixer" question difficult to answer. Controlled ABX double-blind listening tests have not been published at this date; no conclusive answer can be reached. Experienced live sound professionals agree that microphones and loudspeakers (with their innate higher distortion levels) are a much greater source of coloration of sound than the choice of mixer. The mix style of the person mixing is also more important than the make and model of audio console. Analog and digital mixers both have been associated with extremely high-quality concert performances and studio recordings.

Remote control

Analog mixing in live sound has had the option since the 1990s of using wired remote controls for certain digital processes such as monitor wedge equalization and parameter changes in outboard reverb devices. That concept has expanded until wired and wireless remote controls are being seen in relation to entire digital mixing platforms. It's possible to set up a sound system and mix via wireless (or wired) laptop, touchscreen or tablet, especially if the performance requires no unpredictable fast responses to multiple changing conditions on stage. Computer networks can connect digital system elements for expanded monitoring and control, allowing the system technician to make adjustments to distant devices during the performance. The use of remote control technology can be utilized to reduce "seat-kills", allowing more paying customers into the performance space.

Software mixers

For recorded sound, the mixing process can be performed on screen, using computer software and associated input, output and recording hardware. The traditional large control surface of the mixing console is not utilized, saving space at the engineer's mix position. In a software studio, there is either no physical mixer fader bank at all or there is a compact group of motorized faders designed to fit into a small space and connected to the computer via USB or Firewire. Many project studios use such a space-efficient solution, as the mixing room at other times can serve as business office, media archival, etc. Software mixing is heavily integrated as part of a digital audio workstation.

Applications

Public address systems use a mixing console to set microphones to an appropriate level, and can add in recorded sounds into the mix. A major requirement is to minimise audio feedback.

Most bands use a mixing console to combine musical instruments and vocals.

Radio broadcasts use a mixing desk to select audio from different sources, such as CD players, telephones, remote feeds, or prerecorded advertisements.

Dub producers/engineers such as Lee "Scratch" Perry were perhaps the first musicians to use a mixing board as a musical instrument.

Noise music musicians such as Merzbow or Wolf Eyes may create feedback loops within mixers, creating an instrument known as a no-input mixer. The tones generated from a no-input mixer are created by connecting an output of the mixer into an input channel and manipulating the pitch with the mixer's dials.

Mixing console manufacturers

Alesis

Allen & Heath

Audient

Automated Processes, Inc.

AMS Neve

Behringer

Cadac Electronics

Carvin A&I;

Crest Audio

D&R;

DiGiCo

Digidesign

DigiTech

DHD

EAW

Euphonix

Fairlight

Daniel Flickinger

Harris Corporation

Harrison Audio Consoles

Innovason

Klotz Digital

Mackie

MCI

Midas Consoles

Peavey

Phonic Corporation

Pioneer Corporation

Presonus

Rane Corporation

Roland Corporation

Samick

Samson Technologies

Shure

Solid State Logic

Soundcraft

Speck Electronics

Studer

Studiomaster

Tapco

Tascam

Ward-Beck Systems

Yamaha Pro Audio

Yorkville

See also

Console automation

DJ mixer

Electronic mixer

Board mix

Pan law

Aux-send

References

External links

Glossary of mixer terms

Mixer how-to

Category:Sound production technology Category:Audio mixing Category:DJ equipment

bg:Смесителен пулт ca:Taula de mescles cs:Mixážní pult da:Lydmikser de:Mischpult es:Mesa de mezclas de audio fr:Table de mixage gl:Mesa de mesturas ko:오디오 믹서 id:Audio Mixer it:Mixer (consolle) he:מערבל אותות hu:Keverőpult nl:Mengpaneel ja:ミキシング・コンソール no:Miksebord pl:Mikser (muzyka) pt:Mixer ru:Микшерный пульт fi:Miksauslaite sv:Mixerbord uk:Мікшер

name	The Basics
background	group_or_band
origin	Melbourne, Australia
genre	Rock
years active	2002 – (present)
label	Independent, Albert Records
associated acts	Gotye, Down Hills Home, Dog With Wheels, Blood Red Bird
website	The Basics Official Website
current members	Wally De BackerTim HeathKris Schroeder
past members	Michael Hubbard
notable instruments	Lead guitar, drums, bass guitar. }}

The Basics ( ) are a three-piece band from Melbourne, Australia, formed by Wally De Backer and Kris Schroeder in 2002. Their style has been described as anything from 'indie-pop' to 'rock'n'roll' to 'pop-rock', though their records show them span a wide range of genres including reggae, ska, country, and electro-pop. They are "recognised as one of Australia's hardest-working bands".

With close to 1000 shows in their nine-year career, their live performances are well-known for their sense of humour and energy.

Formation

The Basics were formed after Kris met Wally at a party in Melbourne. The event was to see off the young aspiring producer, who was about to depart for Los Angeles, and together with a number of musician friends, the two jammed on some blues-rock standards. Later that night, they bonded over a mutual love of The Beatles, 70s & 80s cartoon theme songs and old Sierra adventure games.

Initially they played around Melbourne as an acoustic guitar/drums combo, starting at The Opposition in Frankston and the House of Fools in Footscray, where in late 2002 they met and later invited Michael Hubbard to join them on electric guitar. Though lacking any real experience with the instrument, Kris willingly purchased his first bass guitar and the trio was born. During this time the group start performing songs with more complicated three-part harmony.

During late 2002 and early 2003 The Basics recorded and released an album called ''Get Back'' through MGM Distribution. They began what was to become regular tours of the East and West coasts of Australia.

2004-2005: Current lineup

Tim Heath joined the group in June 2004, after Michael decided to pursue his solo career, which has included being one half of Down Hills Home. Tim was reportedly the only person to reply to an advertisement in Melbourne's Beat Magazine looking for a new guitarist. Tim apparently answered the advertisement - which said the applicant "must have a love of 50s and 60s rock'n'roll" - thinking that he would be meeting "a couple of old guys to play with on the weekends over some beers". They soon recorded ''For Girls Like You''.

The Basics in 2005 continued to tour and play small festivals, and after releasing ''For Girls Like You'' through MGM Distribution they departed for a national tour of Australia, which lasted for two months and took them to every Australian state and territory. Stuart Padbury, a young Melbourne sound engineer, joined them on much of this tour. On returning, the band began demoing songs for a new album.

2006-2009: Touring and soundtracks

In 2006, The Basics began recording what is to become known as ''Stand Out/Fit In''. This took several months and was not completed until the end of the year, despite intentions to have it released in June. Instead, they held a successful 'album preview' where each of the tracks was demonstrated in 'rough form' accompanied by a music video for each (produced by Melbourne photographic artist James Bryans). The band also talked about the origins of the songs. This event brought a lot of attention to the band for the idea's originality. They pre-released a radio single 'Just Hold On' from the album. The band were invited to play the hugely popular Homebake Festival in Sydney, where they received a great response ("one of the highlights" wrote ''The Daily Telegraph'').

In 2007, the band departed on a tri-state residency which saw them play Melbourne, Sydney and Brisbane every week for the month of April - a bold move which brought further attention to the band for its original idea. Riding on the wave of this tour, Schroeder, De Backer and Heath departed on their first overseas tour which saw them performing 26 shows around Japan, Norway and the United Kingdom. They also toured twice more up the East Coast, one of which was with popular Japanese band The Bawdies. Their song 'Rattle My Chain' was used in a series of commercials for Volvo Australia. The song 'Hey There!' featured in the British film ''The Bank Job'' - starring Jason Statham - and was used as the backing for a February 2007 short film directed by Tim Longhurst called The Rip. Their song 'Better' was featured in a surfing documentary about the invention of the shortboard in 1967.

In 2008, the band appeared on Australia's Channel 9 for Australia Day celebrations, performing two of their songs - 'Just Hold On' and 'Hey There!' - to an estimated audience of 2 million. Securing an Australian Government grant, they embarked on a two-month tour of Australia, specifically targeting "culturally underprivileged groups" in rural and regional schoolchildren and Indigenous communities. The programme had them holding masterclasses and performing alongside Indigenous groups in the remote Northern Territory and Queensland. Their initiative also had them raising money for the charity Lifeline, their contribution to which was recognised with a plaque at the end of the tour. Season two of ''Californication'' starring David Duchovny featured their cover of the classic 'Have Love, Will Travel', most famously covered by 'The Sonics'.

In 2009, The Basics for the first time enjoyed the support of Australian radio network Triple J, which had reportedly snubbed the band's previous material. The singles 'With This Ship' and 'Like A Brother' were added to the station's playlist, and momentum carried The Basics overseas for a second tour of the United Kingdom and Norway, and also a series of shows in Dublin, Ireland. They were joined by the longtime front-of-house engineer Stuart Padbury who had been mixing them since 2005. The band was often seen in the Grafton Street Mall in Dublin busking to promote their concerts there. Their second show in Oslo, Norway saw the band perform with Hot Tub, one of the members of the Norwegian boy band "Boyzvoice", in his first performance for several years. Season Eight of ''Scrubs'' featured the song 'Lookin' Over My Shoulder'.

Despite all this promise, the band's album ''Keep Your Friends Close'' - produced and part-recorded by Peter Cobbin at London's Abbey Road Studios - though enjoying many favourable reviews, failed to impress Richard Kingsmill, music director of Triple J. This effectively ended the band's apparent upward spiral and the resulting album launch tour was reportedly "trying".

2010: Hiatus and live album

In 2010, following the band's fourth stint at the Tamworth Country Music Festival, and the recording of a yet-unreleased live album, an indefinite hiatus was announced on the band's websites. This was in part due to the impending release of a new album produced by Wally for his Gotye project, and also to reported tensions within the band following the previous year's disappointments.

However, this hiatus was soon broken with a two-month residency at the Northcote Social Club in Melbourne, which saw an apparent return to form. The band's EP "Wait For You" enjoys airplay on Triple J. The Basics also played a one-off show at Sydney's Oxford Art Factory.

On 20 August 2010, The Basics released their fourth LP , available free online and exclusively from *[www.FreeBasicsAlbum.com]. The band had reportedly moved to expand their listenership through this free giveaway, though 300 "Deluxe" CD/Vinyl versions have been printed. was recorded at the Northcote Social Club on 6 February, "in front of a live studio audience", and like the previous record was mixed by Peter Cobbin at Abbey Road Studios. Technically a self-titled album, the phonetics spell out the accurate pronunciation of the band’s name. Kris Schroeder: "For years we’ve worked at bringing our live energy into the studio and thus far it’s been a bit hit-and-miss. Our trick this time was to pull a switcheroo and bring the studio to us instead; the result is the best and closest to us we’ve sounded yet."

Melbourne thespian and Dog With Wheels bassist David Bramble - friends with Heath from university days - has occasionally joined the band on tour, playing keys, often while sporting a large moustache. Other guests have included Jake Mason (saxophone), also of Cookin' on 3 Burners and The Bamboos, Gideon Brazil (saxophone, flute), Simon Imrei (guitar and vocals) and Monty MacKenzie (saxophone).

Covers have often made an appearance from various sources: to date, some of the bands covered have been Cream, The Kinks, The Rolling Stones, The Police, Neil Young, Bob Dylan, New Kids on the Block, Richard Berry, Sonny Curtis and The Crickets, JJ Cale, Harry Nilsson, Bill Scott, Ryan Adams and The Coasters (via The Beatles for their cover of Three Cool Cats).

Members

Kris Schroeder: Bass, Vocals

Wally De Backer: Drums, Vocals

Tim Heath: Guitar, Vocals

Discography

Albums

Get Back (15 January 2004)

Stand Out/Fit In (5 May 2007)

Keep Your Friends Close (25 September 2009)

(20 August 2010)

EP

For Girls Like You (11 July 2005)

Lookin' Over My Shoulder (10 February 2007)

Like A Brother (5 June 2009)

Wait For You (21 May 2010)

Singles

Call It Rhythm & Blues (20 August 2004)

Just Hold On

With This Ship (22 February 2009)

Upcoming projects

The band are taking a two year hiatus, set to return to the stage together in early 2012. Wally De Backer will be launching a new album under his Gotye act in August 2011, Tim Heath will be touring and recording with Blood Red Bird, and Kris Schroeder is currently recording a solo album.

References

External links

Official Website

Myspace Website

Category:Victoria (Australia) musical groups