A reticle is a net of fine lines or fibers in the eyepiece of a sighting device, such as a telescope, a telescopic sight, a microscope, or the screen of an oscilloscope. The word ''reticle'' comes from the Latin "reticulum," meaning "net." Today, engraved lines or embedded fibers may be replaced by a computer-generated image superimposed on a screen or eyepiece. There are many variations of reticles; this article concerns itself mainly with a simple reticle: crosshairs.

Crosshairs are most commonly represented as intersecting lines in the shape of a cross, "+", though many variations exist, including dots, posts, circles, scales, chevrons, or a combination of these. Most commonly associated with telescopic sights for aiming firearms, crosshairs are also common in optical instruments used for astronomy and surveying, and are also popular in graphical user interfaces as a precision pointer. The reticle is said to have been invented by Robert Hooke, and dates to the 17th century.

Use

Firearms

Telescopic sights for firearms, generally just called ''scopes'', are probably the device most often associated with crosshairs. Motion pictures and the media often use a view through crosshairs as a dramatic device, which has given crosshairs wide cultural exposure.

Reticle shape

While the traditional thin crossing lines are the original and still the most familiar cross-hair shape, they are really best suited for precision aiming at high contrast targets, as the thin lines are easily lost in complex backgrounds, such as those encountered while hunting. Thicker bars are much easier to discern against a complex background, but lack the precision of thin bars. The most popular types of cross-hair in modern scopes are variants on the ''duplex'' cross-hair, with bars that are thick on the perimeter and thin out in the middle. The thick bars allow the eye to quickly locate the center of the reticle, and the thin lines in the center allow for precision aiming. The thin bars in a duplex reticle may also be designed to be used as a measure. Called a 30/30 reticle, the thin bars on such a reticle span 30 inches at 100 yards when the scope's power is at 4x. This enables an experienced shooter to deduce (as opposed to guess or estimate) the range within an acceptable error limit.

Wire crosshairs

The original crosshairs in fact used hair or spiderweb, as it was thin and strong. Many modern scopes use wire crosshairs, which can be flattened to various degrees to change the width. These wires are usually silver in color, but appear black when backlit by the image passing through the scope's optics. Wire reticles are by nature fairly simple, as they require lines that pass all the way across the reticle, and the shapes are limited to the variations in thickness allowed by flattening the wire; duplex crosshairs, and crosshairs with dots are possible, and multiple horizontal or vertical lines may be used. The advantage of wire crosshairs is that they are fairly tough and durable, and provide no obstruction to light passing through the scope.

Etched reticles

The first suggestion for etched glass reticles was made by Philippe de La Hire in 1700. His method was based on engraving the lines on a glass plate with a diamond point. Many modern crosshairs are actually etched onto a thin plate of glass, which allows a far greater latitude in shapes. Etched glass reticles can have ''floating'' elements, which do not cross the reticle; circles and dots are common, and some types of glass reticles have complex sections designed for use in range estimation and bullet drop and drift compensation (see external ballistics). The disadvantage of glass reticles is that they are less durable than wire crosshairs, and the surface of the glass reflects some light, lessening transmission through the scope.

Illuminated reticles

Reticles may be illuminated, either by a plastic or fiber optic light pipe collecting ambient light or, in low light conditions, by a battery powered LED. Some sights also use the radioactive decay of tritium for illumination that can work for 11 years without using a battery, used in the British SUSAT sight for the SA80 (L85) assault rifle and in the American ACOG (Advanced Combat Optical Gunsight). Red is the most common color used, as it is the least destructive to the shooter's night vision, but some products use green or yellow illumination, either as a single colour or changeable via user selection.

Graticule

A graticule was a specialized reticle used in Control Officer's binoculars by the Royal Navy during World War Two. It consisted of a rotatable reticle that could be aligned with a target aircraft's fuselage and the degree of rotation was then transmitted electrically to a computer. The graticule could also be offset to allow for wind correction.

Reticle focal plane

The reticle may be located at the front or rear focal plane (First Focal Plane (FFP) or Second Focal Plane (SFP)) of the telescopic sight. On fixed power telescopic sights there is no significant difference, but on variable power telescopic sights the front plane reticle remains at a constant size compared to the target, while rear plane reticles remain a constant size to the user as the target image grows and shrinks. Front focal plane reticles are slightly more durable, but most American users prefer that the reticle remains constant as the image changes size, so nearly all modern American variable power telescopic sights are rear focal plane designs. European high end optics manufacturers often leave the customer the choice between a FFP or SFP mounted reticle.

Collimated reticles

Collimated reticles are produced by non-magnifying optical devices such as reflector sights (often called ''reflex sights'') that give the viewer an image of the reticle superimposed over the field of view, and blind collimator sights that are used with both eyes. Collimated reticles are created using refractive or reflective optical collimators to generate a collimated image of an illuminated or reflective reticle. These types if sights are used on surveying/triangulating equipment, to aid celestial telescope aiming, and as sights on firearms. Historically they were used on larger military weapon systems that could supply an electrical source to illuminate them and where the operator needed a wide field of view to track and range a moving target visually (i.e. weapons from the pre laser/radar/computer era). More recently sights using low power consumption durable light emitting diodes as the reticle (called ''red dot sight''s) have become common on small arms with versions like the Aimpoint CompM2 being widely fielded by the U.S. Military.

Holographic reticles

Holographic weapon sights use a holographic image of a reticle at infinity built into the viewing window and a collimated laser diode to illuminate it. The downside to the holographic weapon sight is the cost, weight and shorter battery life.

Surveying and astronomy

In older instruments, reticle crosshairs and stadia marks were made using threads taken from the cocoon of the brown recluse spider. This very fine, strong spider silk makes for an excellent crosshair.

Surveying

In surveying, reticles are designed for specific uses. Levels and theodolites would have slightly different reticles. However, both may have features such as stadia marks to allow distance measurements.

Astronomy

For astronomical uses, reticles could be simple crosshair designs or more elaborate designs for special purposes. Telescopes used for polar alignment could have a reticle that indicates the position of Polaris relative to the north celestial pole. Telescopes that are used for very precise measurements would have a filar micrometer as a reticle; this could be adjusted by the operator to measure angular distances between stars.

For aiming telescopes, reflex sights are popular, often in conjunction with a small telescope with a crosshair reticle. The reflex sight, such as the Telrad, make aiming the telescope on a Astronomical object or a region of the sky quite easy.

The constellation Reticulum was designated to recognize the reticle and its contributions to astronomy.

See also

Sniper

Iron sight

Deflection (military)

Focusing screen – used in photography, and often etched

References

External links

Chuck Hawks' article on firearm scope reticles

An explanation of firearm rangefinding reticles from a maker of ballistics software

Article on Cabela's Alaskan Guide scopes, which use a first focal plane reticle

User Guide for Mil-Dot Equipped Optics, Remington Military Products Division

Category:Firearm sights Category:Optics Category:Astronomical instruments Category:Surveying Category:Artillery components

ca:Retícula de:Absehen es:Retículo (pieza) fr:Réticule (optique) io:Retikulo

Robert Grant Furlong (January 4, 1886 – March 19, 1973) was a Democratic member of the U.S. House of Representatives from Pennsylvania.

Biography

Robert G. Furlong was born in Roscoe, Pennsylvania. He graduated from the State Teachers College in California, Pennsylvania, in 1904 and from Jefferson Medical College in Philadelphia, Pennsylvania, in 1909. He taught school at Roscoe, PA, in 1904 and 1905, and practiced medicine in Donora, Pennsylvania, from 1910 to 1968. During the First World War, Furlong served as a first lieutenant with the Two Hundred and Eightieth Ambulance Company, Twentieth Division. He served as a burgess of Donora from 1922 to 1926 and again in 1941 and 1942. He served as postmaster of Donora from 1933 to 1938.

Furlong was elected as a Democrat to the Seventy-eighth Congress, but was an unsuccessful candidate for renomination in 1944. He resumed the practice of medicine, and was elected sheriff of Washington County, Pennsylvania, serving from 1945 to 1961.

References

Retrieved on 2009-02-22

The Political Graveyard

Category:Members of the United States House of Representatives from Pennsylvania Category:1886 births Category:1973 deaths Category:American military personnel of World War I Category:Postmasters Category:California University of Pennsylvania alumni