Pinball is a type of arcade game, usually coin-operated, where a player attempts to score points by manipulating one or more metal balls on a playfield inside a glass-covered case called a pinball machine. The primary objective of the game is to score as many points as possible. Secondary objectives are to maximize the time spent playing (by earning ''extra balls'' and keeping the ball in play as long as possible) and to earn free games (known as ''replays'').
History of pinball
Evolution from outdoor games
The origins of pinball are intertwined with the history of many other games. Games played outdoors by rolling balls or stones on a grass course, such as
bocce or
bowls, eventually evolved into games played by hitting the balls with sticks and propelling them at targets.
Croquet,
golf and
shuffleboard are examples of these games.
These games led to indoor versions that could be played on a table, such as billiards, or on the floor of a pub, like bowling. The tabletop versions of these games became the ancestor of the modern pinball machine.
Bagatelle
The existence of table-based games dates back to the 15th century. While some games took the wickets and balls of Croquet and turned them into the pockets of modern billiards, some tables became smaller and had the holes placed in strategic areas in the middle of the table.
In France, during the reign of King Louis XIV, someone took a billiard table and narrowed it, placing pins at one end of the table while making the player shoot balls with a stick or cue from the other end. Pins took too long to reset when knocked down, so the pins eventually were fixed to the table and holes took the place of targets. Players could ricochet the ball off the pins to achieve the harder scorable holes.
In 1777, a party was thrown in honor of the King and his wife at the Château de Bagatelle, owned by the brother of the king. The highlight of the party was a new table game featuring the slender table and cue sticks, which players used to shoot ivory balls up an inclined playfield. The table game was dubbed Bagatelle by the King's brother and shortly after swept through France.
Some French soldiers carried their favorite bagatelle tables with them to America while helping to fight the British in the American Revolutionary War. Bagatelle spread and became so popular in America as well that a political cartoon from 1863 even depicts President Abraham Lincoln playing a tabletop bagatelle game.
The birth of pinball
In 1869, a British inventor named Montague Redgrave settled in America and manufactured bagatelle tables out of his factory in
Cincinnati, Ohio. In 1871 Redgrave was granted US Patent #115,357 for his "Improvements in Bagatelle", which replaced the cue at the player's end of the table with a coiled spring and a plunger. The player shot balls up the inclined playfield using this plunger, a device that remains in pinball to this day. This innovation made the game friendlier to players. The game also shrank in size and began to fit on top of a bar or counter. The balls became marbles and the wickets became small "pins". Redgrave's innovations in game design are acknowledged as the birth of pinball in its modern form.
Depression era
By the 1930s, manufacturers were producing coin-operated versions of bagatelles, now known as "marble games" or "pin games". The table was under glass and used Redgrave's plunger device to propel the ball into the upper playfield. In 1931 David Gottlieb's ''Baffle Ball'' became the first overnight hit of the coin-operated era. Selling for $17.50, the game dispensed five to seven balls for a penny. The game struck a chord with a public eager for cheap entertainment in a depression-era economy. Most drugstores and taverns in America operated pinball machines, with many locations making back the cost of the game in a matter of days. Baffle Ball sold over 50,000 units and established Gottlieb as the first major manufacturer of pinball machines.
In 1932, Gottlieb distributor Ray Moloney found it hard to obtain more Baffle Ball units to sell. In his frustration he founded Lion Manufacturing to produce a game of his own design, ''Ballyhoo'', named after a popular magazine of the day. The game became a smash hit as well; its larger playfield and ten pockets making it more of a challenge than ''Baffle Ball'', selling 50,000 units in 7 months. Moloney eventually changed the name of his company to Bally to reflect the success of this game. These early machines were relatively small, mechanically simple and originally designed to sit on a counter or bar top.
The 1930s saw a leap forward in innovation in pinball design and devices with the introduction of electrification. A company called Pacific Amusements in Los Angeles, California, USA produced a game called ''Contact'' in 1933. ''Contact'' had an electrically powered solenoid to propel the ball out of a bonus hole in the middle of the playfield. Another solenoid rang a bell to reward the player. The designer of ''Contact'', Harry Williams, would eventually form his own company, Williams Manufacturing, in 1944. Other manufacturers quickly followed suit with similar features. In addition, electric lights soon became a standard feature of all subsequent pinball games, designed to attract people to the game.
By the end of 1932 there were approximately 150 companies manufacturing pinball machines, most of them in the city of Chicago. Chicago has been the center of pinball manufacturing ever since. Competition among the companies was brutal, however, and by 1934 there were only 14 companies left.
Post-war boom
During World War II all of the major manufacturing companies in coin-operated games were put into use manufacturing equipment for the American war effort. Some companies like Williams bought old games from operators and refurbished them, adding new artwork with a patriotic theme. By the end of the war, a generation of Americans looked for amusement in their bars and malt shops. Pinball saw another golden age of growth. Innovations such as the tilt mechanism and free games (known as replays) appeared.
The post-war era was dominated by Gottlieb. Game designer Wayne Neyens along with artist Leroy Parker turned out game after game that collectors consider some of the most classic pinball machines ever designed. Gottlieb's ''Humpty Dumpty'', introduced in 1947, was the first game to add player-controlled flippers to keep the ball in play longer and added a skill factor to the game. The low power of the ''Humpty Dumpty'' flippers necessitated that three pairs be placed around the playfield in order to get the ball to the top. But the addition of a DC power supply enabled the flippers on ''Humpty Dumpty'' to become only two, more powerful ones at the bottom of the ''Triple Action'' playfield—one of many innovations by designer Steve Kordek, who is also credited with introducing the very first "drop target" (1962 on ''Vagabond'') and "multiball" (1963 on ''Beat the Clock'') concepts to the game.
Solid-state era
The advent of the
microprocessor brought another new age for pinball as it entered the realm of
electronic gaming. The electromechanical
relays and scoring reels that drove games in the 1950s and 1960s were replaced in the 1970s with
circuit boards and digital displays. Williams introduced their first solid-state
electronic game, ''Hot Tip'', in 1977, and because of this new technology, they and Bally thrived in this era as they both sold large numbers of games with fancy sound effects, speech, and game features that only a computer could make possible.
The video game boom of the 1980s, however, signaled the end of the boom for pinball. Arcades quickly replaced rows of pinball machines with games like 1978's ''Space Invaders'', 1979's ''Asteroids'', 1980's ''Pac-Man,'' and 1981's ''Galaga''. The video games earned significantly greater profits than the pinball machines of the day. Bally, Williams, and Gottlieb continued to quietly make pinball machines while they also manufactured video games in much higher numbers. Many of the larger companies were acquired by, or merged with, other companies. Chicago Coin was purchased by the Stern family who brought the company into the digital era as Stern Enterprises, which closed its doors in the mid-1980s. Bally exited the pinball business in 1988 and sold their assets to Williams, who subsequently used the Bally trademark from then on for about half of their pinball releases.
While the video game craze of the late '70s and early '80s dealt a severe blow to pinball revenue, it did spark the creative talents within the industry. All companies involved tried to take advantage of the new solid state technology to improve player appeal of pinball and win back former players from the video games. Some of this creativity resulted in landmark designs and features still present today. Some of these include Speech like on Williams' "Gorgar", ramps for the ball to travel around such as Williams "Space Shuttle", "multiball" used on William's "Firepower", multi-level games like Gottlieb's "Black Hole" and Williams' "Black Knight", and blinking chase lights as used on Bally's "Xenon". Although these novel features did not entirely win back players as the manufacturers had hoped, they did change the way pinball would be perceived by players for decades to come.
Pinball in the digital age
After the collapse of the coin-operated video game industry, pinball saw another comeback in the 1990s. Some new manufacturers entered the field such as Capcom Pinball and Alvin G. and Company, founded by Alvin Gottlieb, son of David Gottlieb. Gary Stern, the son of Williams co-founder Sam Stern, founded
Data East Pinball with funding from Data East Japan.
The games from Williams now dominated the industry, with complicated mechanical devices and more elaborate display and sound systems attracting new players to the game. Licensing popular movies and icons of the day became a staple for pinball, with Bally/Williams' ''The Addams Family'' hitting an all-time modern sales record of 20,270 machines. Two years later, Williams commemorated this benchmark with a limited edition of 1,000 ''Addams Family Gold'' pinball machines, featuring gold-colored trim and updated software with new game features. Other notable popular licenses included ''Indiana Jones: The Pinball Adventure'' and ''Star Trek: The Next Generation''. Expanding markets in Europe and Asia helped fuel the revival of interest. Pat Lawlor was a designer, working for Williams up until their exit from the industry in 1999. About a year later, Lawlor announced a return to the industry, starting his own company. working in conjunction with Stern Pinball to produce new games into the new millennium.
The end of the 1990s saw another downturn in the industry, with Gottlieb, Capcom, and Alvin G. all closing their doors by the end of 1996. Data East's pinball division was acquired by Sega and became Sega Pinball in 1996. By 1997 there were only two companies left: Sega Pinball and Williams. In 1999 Sega sold their pinball division to Gary Stern (President of Sega Pinball at the time) who called his company Stern Pinball. By this time, Williams games rarely sold more than 4,000 units. In 1999 Williams attempted to revive sales with the Pinball 2000 line of games, merging a video display into the pinball playfield. The reception was initially good with ''Revenge From Mars'' selling well over six thousand machines, but well short of the ten thousand and up production runs for releases just a half dozen years earlier. The next Pinball 2000 game, ''Star Wars Episode I'', managed to sell only a little over 3,500 machines. Williams exited the financially weak pinball business to focus on making gaming equipment for casinos, which was significantly more profitable. They licensed the rights to reproduce Bally/Williams parts to Illinois Pinball and the rights to reproduce full sized machines to The Pinball Factory. Stern Pinball is the only remaining manufacturer of original pinball machines. Almost all members of the design teams for Stern Pinball are former employees of Williams.
In November 2005 The Pinball Factory (TPF), based in Melbourne, Australia, announced that they would be producing a new ''Crocodile Hunter''-themed pinball machine under the Bally label. However, with the death of Steve Irwin, it was announced that the future of this game has become uncertain. In 2006 TPF announced that they would be reproducing two popular 90's era Williams machines, ''Medieval Madness'' and ''Cactus Canyon''. TPF however was unable to make good on its promises to produce new machines, and in October, 2010 transferred its Williams Electronics Games licenses as well as its pinball spare parts manufacturing and distribution business to Planetary Pinball Supply Inc, a California distributor of pinball replacement parts.
In 2006, Illinois pinball company PinBall Manufacturing Inc. produced 178 reproductions of Capcom's ''Big Bang Bar'' for the European market and U.S. markets.
In 2011, Jersey Jack Pinball of Lakewood, NJ announced plans to produce a pinball machine called ''Wizard of Oz.''
Pinball and gambling
Pinball machines, like many other mechanical games, were sometimes used as
gambling devices. Some pinball machines, such as Bally's "bingos", featured a grid on the backglass scoring area with spaces corresponding to targets or holes on the playfield. Free games could be won if the player was able to get the balls to land in a winning pattern; however, doing this was nearly
random, and a common use for such machines was for gambling. Other machines allowed a player to win and accumulate large numbers of "free games" which could then be cashed out for money with the location owner. Later, this type of feature was discontinued in an effort to legitimize the machines, and to avoid legal problems in areas where awarding free games was considered illegal, some games, called Add-A-Ball, did away with the free game feature, instead giving players extra balls to play (between 5 and 25 in most cases). These extra balls were indicated via lighted graphics in the backglass or by a ball count wheel, but in some areas even that was disallowed and so some games came with a sticker to cover over the counters.
Pinball was banned beginning in the early 1940s until 1976 in New York City. New York mayor Fiorello La Guardia was responsible for the ban, believing that it robbed school children of their hard earned nickels and dimes. La Guardia spearheaded major raids throughout the city, collecting thousands of machines. The mayor himself participated alongside the police in destroying the machines with sledgehammers before dumping the remnants into the city's rivers.
The ban ended when Roger Sharpe (a star witness for the AMOA - Amusement and Music Operators Association) testified in April 1976 before a committee in a Manhattan courtroom that pinball games had become games of skill and were no longer games of chance (i.e. gambling). He began to play one of two games set up in the courtroom, and — in a move he compares to Babe Ruth's home run in the 1932 World Series — called out precisely what he was going to shoot for, and then proceeded to do exactly so. Astonished committee members reportedly then voted to remove the ban, a result which was then followed in many other cities. (Sharpe reportedly acknowledges his courtroom shot was by sheer luck.)
Like New York, Los Angeles banned pinball machines in 1939. The ban was overturned by the Supreme Court of California in 1974 because (1) if pinball machines were games of chance, the ordinance was preempted by state law governing games of chance in general, and (2) if they were games of skill, the ordinance was unconstitutional as a denial of the equal protection of the laws. Regardless of these events, some towns in America still have such bans on the law books over fifty years later, and several countries still ban the games and their rewards. More recent games are clearly labeled "FOR AMUSEMENT ONLY" in an attempt to emphasize their legitimate, legal nature.
Pachinko
Another close but distinct relative of pinball is
pachinko, a gambling game played in
Japan. Although they share a common ancestry, the games are very different, in that pachinko simply involves shooting many small balls one after the other into a nearly-vertical playfield, while pinball is about the manipulation of the small number of balls currently in play.
Machine layout
The key attribute of a successful pinball game is an interesting and challenging layout of scoring opportunities on the playfield. Many types of targets and features have been developed over the years.
Playfield
The ''playfield'' is a
planar surface inclined upward from three to seven
degrees (current convention is six and a half degrees), away from the player, and includes multiple targets and scoring objectives. Some operators intentionally extend (to raise) threaded levelers on the rear legs and/or shorten or remove the levelers on the front legs to create additional incline in the playfield, making the ball move faster and harder to play. It is important that the playfield be level left-to-right; a quick visual test compares the top of the back cabinet against a brick or block wall behind it, or to roll a marble down the center of the playfield glass. If it clearly rolls off to one side, a player may be inclined to stuff folded paper beneath the legs on the lower side to level the playfield. Additionally, leg levelers that are all extended fully make the game easier to nudge; when collapsed low, the entire game is more stable, and nudging becomes harder. A game that's fun to play makes more money for the owner; a game that is faulty does not get repeat customers.
The ball is put into play by use of the ''plunger'', a spring-loaded rod that strikes the ball as it rests in an entry lane, or as in some newer games, by a button that signals the game logic to fire a solenoid that strikes the ball. With both devices the result is the same: The ball is propelled upwards onto the playfield. Once a ball is in play, it tends to move downward towards the player, although the ball can move in any direction, sometimes unpredictably, as the result of contact with objects on the playfield or by the player's own actions. To return the ball to the upper part of the playfield, the player makes use of one or more ''flippers''. Manipulation of the ball may also be accomplished by nudging (physically pushing the cabinet). However, excessive nudging is generally penalized by the loss of the current player's turn (known as ''tilting'') or ending of the entire game when the nudging is particularly violent (known as ''slam tilting''). This penalty was instituted because nudging the machine too much may damage it. Many games also have a slam tilt in the bottom of the lower cabinet to end the game if the cabinet is raised and dropped to the floor in an attempt to falsely trigger the coin counting switch.
Plunger
The ''plunger'' is a
spring-loaded rod with a small handle, used to propel the ball into the playfield. The player can control the amount of
force used for launching by pulling the plunger a certain distance (thus changing the spring
compression). This is often used for a "skill shot", in which a player attempts to launch a ball so that it exactly hits a specified target. Once the ball is in motion in the main area of the playfield, the plunger is not used again until another ball must be brought onto the playfield. In modern machines, an
electronically-controlled launcher is sometimes substituted for the plunger.
Flippers
The ''flippers'' are one or more small mechanically or electromechanically-controlled levers, roughly 3 to 7 cm in length, used for redirecting the ball up the playfield. They are the main control that the player has over the ball. Careful timing and positional control allows the player to intentionally direct the ball in a range of directions with various levels of velocity. With the flippers, the player attempts to move the ball to hit various types of scoring targets, and to keep the ball from disappearing off the bottom of the playfield. The very first pinball games appeared in the early 1930s and did not have flippers; after launch the ball simply proceeded down the playfield, directed by static nails (or "pins") to one of several scoring areas. (These pins gave the game its name). In 1947, the first mechanical flippers appeared on Gottlieb's
Humpty Dumpty and by the early 1950s, the familiar two-flipper configuration, with the flippers at the bottom of the playfield above the center drain, had become standard. Some machines also added a third or fourth flipper midway up the playfield.
The new flipper ushered in the "golden age" of pinball, where the fierce competition between the various pinball manufacturers led to constant innovation in the field. Various types of stationary and moving targets were added, spinning scoring reels replaced games featuring static scores lit from behind. Multiplayer scores were added soon after, and then bells and other noise-makers, all of which began to make pinball less a game and more of an experience. The flippers have loaned pinball its common name in many languages, where the game is known mainly as "flipper".
Bumpers
Round knobs that, when hit, will actively push the ball away. There is also an earlier variety of bumper (known as a ''dead bumper'' or ''passive bumper'') that doesn't propel the ball away; most bumpers on machines built since the 1960s are active bumpers, variously called "pop bumpers", "thumper bumpers", "jet bumpers", or "turbo bumpers". Most recent games include a set of pop bumpers, usually three, sometimes more or less depending on the designer's goals. Bumpers predate flippers, and active bumpers added a great deal of spice to older games.
Pop bumpers are operated by a switch connected to a ring surrounding the bottom circumference of the bumper that is suspended several millimeters above the playfield surface. When the ball rolls over this ring and forces one side of it down, a switch is closed that activates the bumper's solenoid. This pulls down a tapered ring surrounding the central post of the bumper that pushes downward and outward on the ball, propelling it away.
Kickers and Slingshots
Rubber pads which propel the ball away upon impact, like bumpers, but are usually a horizontal side of a wall. Every recent pinball machine includes slingshots to the upper left and upper right of the lowest set of flippers; older games used more experimental arrangements. They operate similarly to pop bumpers, with a switch on each side of a solenoid-operated lever arm in a typical arrangement. The switches are closed by ball contact with the rubber on the face of the kicker and this activates the solenoid.
Early pinball machines typically had full solenoid current passing through trigger switches for all types of solenoids, from kickers to pop bumpers to the flippers themselves. This caused arcing across switch contacts and rapid contact fouling and failure. As electronics were gradually implemented in pinball design, solenoids began to be switched by power transistors under software control to lower switch voltage and current, vastly extend switch service lifetime, and add flexibility to game design.
As an example, some later machines had flippers that could be operated independently of the flipper button by the machine's software. The upper-left flipper during Thing Flips on The Addams Family pinball machine triggers automatically a brief moment after the ball passes an optical sensor just above the flipper.
The smaller, lower-powered solenoids were first to be transistorized, followed later by the higher-current solenoids as the price, performance, and reliability of power transistors improved over the years.
Targets
''Stationary Targets'': These are static targets that simply record when a ball strikes them. These are generally the simplest playfield elements. They are also known as ''spot targets''.
''Bullseye Targets'': These are static targets that have two concentric elements, similar to a stationary target. Hitting the outer ring usually scores lower than hitting the center bull's eye. They are found mostly on older electro-mechanical games.
''Drop targets'': These are targets that drop below the playfield when hit. Eliminating an entire row in this manner may lead to any of various features. Once an entire bank of drop targets is hit, the bank may reset or pop back up. Alternatively, the drop targets can be placed in front of other targets, requiring the drop target to be knocked down before the targets behind can be hit, or the drop target may only pop up at specific times to deny the player the ability to shoot the ball into whatever is behind it. If used in the latter way, the target is usually blocking a lane or ramp.
''Kicking Target'': Used rarely, these targets look like stationary targets, but when hit they kick the ball away in the opposite direction much like a slingshot or bumper.
''Vari-Target'': These targets reward a different amount of points depending on how hard the target was hit. It is a metal arm that pivots under the playfield. When a ball hits it, it ratchets back sometimes, resetting immediately or resetting only after it is hit all the way back. A large sum of points is usually rewarded when the target is hit back all the way with one strike of the ball.
Holes and saucers
''Holes'': The player directs the ball into a hole. On modern games, there are both vertical and horizontal holes (also called ''scoops''), and the game may include mechanisms to move the ball between them. On some older games, a "gobble hole" is sometimes included, usually awarding a large bonus or a game feature, but not giving the ball back.
''Saucers'': A shallow hole with a kicker inside. The ball remains visible on the table and is kicked out either straight up (usually into a duct or rail chute) or sideways back onto the table.
Originally holes and saucers worked by using tubes behind the playing field, with a pin at the top to hold the ball for later drops. Another version of the tube uses two spinning wheels to transfer the ball from hole to hole. Newer versions use an electronic track with a carriage or an electromagnet to pull the ball between holes.
Spinners and rollovers
''Spinners'': A ball can push through a flat surface that is hinged in the middle, causing it to spin; each rotation adds points.
''Rollovers'': These are targets activated when a ball rolls over them. Often a series of rollover targets are placed side-by-side and with dividers between them forming "lanes"; the player must guide the ball to particular lanes (or to all lanes) in order to complete an objective. Such lanes are frequently placed at the bottom sides of the table: "inlanes" feed the ball back to the flippers, "outlanes" cause the ball to immediately drain. On many tables, outlanes can have extra balls or "specials" lit to act in the same role as the older gobble holes.
''Whirlwind Spinner(s)'': Used in many games, a whirlwind spinner is a fast-rotating (often rubberized) disk on the playfield that momentarily "grabs" the ball and throws it off into a random direction. Some games couple a whirlwind spinner with a magnet placed in the center, although DataEast seems to be the only manufacturer to do so. Bally's "Fireball" and Chicago Coin's "Casino" were popular games with a whirlwind spinner.
Switches, gates, and stoppers
''Switch'': A switch is an area that is blocked off after the ball passes through it once. An example of this is the initial firing lane: as a ball passes through the firing lane, it hits a switch and cannot reenter that chute.
''Gate'': This is a block that will allow balls to come through one way but will block the ball if it is going the other way.
''Stopper'': Also called a ''magic post'', this is a small pole most often found centered between and just below the lowest set of flippers and also rarely next to the outlanes. When activated (typically by hitting a specific target or targets), the pole ascends from inside the table, blocking the area between the flippers for a limited time, making it more difficult to drain and lose the ball. After time expires, it returns to its resting place just below the playfield.
Ramps
As the name implies, ramps are inclined planes, with a gentle enough slope that the ball may travel along it. The player attempts to direct the ball with enough force to make it to the top of the ramp and down the other side. If the player succeeds, a "ramp shot" has been made. Ramps frequently end in such a way that the ball goes to a flipper so one can make several ramp shots in a row. Often, the number of ramp shots scored in a game is tallied, and reaching certain numbers may lead to various game features. At other times, the ramps will go to smaller "mini-playfields" (small playfields, usually raised above the main game surface, with special goals or scoring).
Toys, magnets and captive balls
''Toys'': Toys are various items on, above, or beneath the playfield (items beneath the playfield visible through windows) or attached to the cabinet (usually to the backbox). Usually, each toy is unique to the machine it was made for, and reflects the theme of the game. They may be visual only, and have no effect on game play; they may be alternate ways of performing common game functions (for example, instead of using a drop hole to hold the ball, a hand or dinosaur might reach out, grab the ball, and capture it that way); or they may be an integral part of the game rules and play (for instance, having a smaller playfield over the main playfield that can be tilted right and left by the player, using the flipper buttons).
''Electromagnets'': Some tables feature electrically operated magnets below the playfield to affect the ball's speed and/or trajectory according to the current state of game play. This may be done to make the ball's movement unpredictable, to temporarily halt the ball (as a "ball saver", for example), or to otherwise control the ball by non-mechanical means. Electromagnets may also be used in above-playfield elements (often as part of the playfield "toys") to grab the ball and move it elsewhere (up onto a mini-playfield, for example). The Williams machine The Twilight Zone, featured a mini-playfield that used electromagnets controlled by the flipper buttons, allowing the player to "flip" the ball on the mini-playfield, essentially working as invisible flippers. Contrary to popular myth, there are no professionally produced pinball machines known to contain permanent magnets under the playfield with the intent of making game play harder or to increase ball losses.
''Captive Balls'': A ball that remains on the playfield and is allowed to move around only within a confined area. A typical application of this is having a short lane on the playfield with a narrow opening, inside which a captive ball is held. The player can strike this captive ball with the ball in play, pushing it along the lane to activate a rollover switch or target. In games such as "Theatre of Magic" captive balls sometimes have whats called a "Newton Ball," which is a stationary ball adjacent to a free ball in a small lane. The ball being played strikes the Newton ball which, in turn, transfers its momentum to the adjacent ball, which causes it to move.
Common features
There are other idiosyncratic features on many pinball playfields. Pinball games have become increasingly complex and multiple play modes, multi-level playfields, and even progression through a rudimentary "plot" have become common features on recent games. Pinball scoring objectives can be quite complex and require a series of targets to be hit in a particular order. Recent pinball games are distinguished by increasingly complex rule sets that require a measure of strategy and planning by the player for maximum scoring. Players seeking highest scores would be well-advised to study the placard (usually found in the lower-left corner of the playfield) to learn each game's specific patterns required for these advanced features and scoring.
Common features in modern pinball games include the following:
''Ball lock'': Each time a ball goes into a specific hole or target, it is "locked" and a new ball appears at the plunger. When the player has locked the required number of balls (usually three or howsoever many), a multiball starts. On some games, the balls are physically locked in place by solenoid-actuated gates, but many newer machines use "virtual" ball locks instead, in which the game merely keeps count of the number of locked balls and then auto-launches them from the main ball trough when it is time for them to be released.
''Multiball'': This occurs when there is more than one ball in play at a time, and usually includes some kind of "jackpot" scoring. Multiball ends when all but one ball is lost down the bottom of the playfield, when regular play resumes.
''Jackpot'': Some targets on the playfield increase the scoring value of something else, which could be as simple as hitting a ramp, or a complicated sequence of targets. Upon their inception, the Jackpot was the main goal of most pinball machines in the 1980s. Jackpots would often range from 1-4 million (back when it was a significant addition to the score), and their value would accrue between games until it was scored. Scoring it was usually a complicated task. Modern games often dilute the meaning of a jackpot. Modern games give off several "Jackpots" in each multiball mode, which is usually quite easy to attain, and the value of today's "Jackpots" is far less significant.
''End-of-ball bonus'': After each ball is played, the player scores bonus points depending on how many times certain features have been activated, or the amounts of items that the player may obtain. Some games award a seemingly arbitrary amount of points that depend on the number of times ''any'' switch has been hit. Virtually all games have the ability to assign a multiplier to the bonus. Most games cap the bonus multiplier at 5x or 10x, although more modern games apparently have no limit.
''Extra ball'': If a player has earned this, when they lose a ball, they get another one to play immediately afterward, and the machine does not count the lost ball towards the limit of balls for that game. For example, if the player were on Ball 2, and they have an extra ball, the next ball (the extra one) will also be Ball 2 (it will not be Ball 3). When a machine says "SHOOT AGAIN" on the scoreboard, it signifies that an extra ball will shoot. In a multiplayer game, the player who just lost the ball is the same one to shoot again.
Various timed rounds (''modes''): For example, if the player hit a specific target three times within the next 20 seconds, they might score several tens of millions of points for it. There are many and various time-related features in pinball. Progression through each mode is frequently accompanied by DMD animations and sound.
''Stackability'': To "stack" means that the player can run one play mode while another mode is in progress. This strategy usually yields higher scores. A noted example of this is Williams' ''Bram Stoker's Dracula'', with its Multi-Multiball feature.
''Wizard Mode'': This is a special scoring mode, which is reached after meeting certain prerequisites to access this mode (e.g., finishing all modes). This is the pinball equivalent of the final boss fight in video games. Classic examples of this include Williams' ''Black Knight 2000'' (The King's Ransom) and Midway's ''Twilight Zone'' (Lost in the Zone). Named after The Who's song ''Pinball Wizard''. Wizard modes come in two varieties: goal-oriented types where the player receives a huge amount of points after completing a specific task, or multiball modes with 4-6 balls in play, and virtually every feature active. Some games offer both and award the latter as a condition for completing the former.
''Ball Index'': Many modern games include a feature that prevents a player from being disappointed if a ball sent into play quickly drains before substantial points have been added. This player will immediately be given another (free) ball to compensate. Electromechanical games made during the 1970s had a similar Ball Index switch system that returned a drained ball if no points were made.
''Slam Tilt'': There are special tilt switches placed on the underside of the playfield, on the coin door, and (on electromechanical games) in the lower cabinet and upper cabinet, designed to prevent cheating. If a player lifts and drops, pounds, or kicks the machine and activates any slam tilt, the entire game ends immediately for all players and may go into a reset/reboot mode. These are also used on video games. A similar Incline Tilt prevents a player from lifting the front of the cabinet to tip the ball back up the playfield by ending his turn.
Unique features
In the '90s, game designers often put hidden, recurring images or references in their games called
Easter Eggs, similar to how easter eggs are placed in video games and other PC software. For example, Williams' designers hid cows in the video displays of the games, and
Pat Lawlor would place a red button in the artwork of games he developed. The methods used to find the hidden items usually involved pressing the flipper buttons in a certain order or during specific events. Designers also included hidden messages or in-jokes; one example of this is the phrase "DOHO" sometimes seen quickly displayed on the dot matrix displays, a reference to
Dorris
Ho, the wife of then-Williams display artist Scott Slomiany [AKA Scott Matrix]. DOHO was popularly thought to be an acronym for
Documented
Occurrence of a
Hidden
Object until its true meaning was revealed in a
PinGame Journal article on the subject. The game ''
Star Trek:The Next Generation'' went so far as to embed a hidden ''
Breakout-like'' game available only after a complex sequence of events was accomplished during the game.
Backglass
The ''backglass'' is a vertical graphic panel mounted on the front of the backbox, which is the upright box at the top back of the machine. The backglass contains the name of the machine, eye-catching
graphics, (usually) the score displays (lights, mechanical wheels, digital displays, or a dot matrix display depending on the era), and sometimes a mechanical device tied to game play, for example, elevator doors that opened on an image or a woman swatting a cat with a broom such as on
Williams' 1989 "Bad Cats". For older games, the backglass image is painted in layers on the reverse side of a piece of glass; in more recent games, the image is imprinted into a translucent piece of plastic-like material called a translite which is mounted behind a piece of glass and which is easily removable. The earliest games did not have backglasses or backboxes and were little more than playfields in boxes. Games are generally built around a particular theme, such as a
sport or character and the backglass art reflects this theme to attempt the attention of players. Recent machines are typically "tied-in" to other enterprises such as a popular
film series,
toy, or
brand name. The entire machine is designed to be as eye-catching as possible to attract players and their quarters; every possible space is filled with colorful graphics, blinking lights, and themed objects, and the backglass is usually the first artwork the players see from a distance. Since the artistic value of the backglass may be quite impressive, it is not uncommon for enthusiasts to use a deep frame around a backglass (with a light behind it) and hang it on a wall after the rest of the game is discarded.
Scoring points
Contact with or manipulation of scoring elements (such as targets or ramps) scores points for the player. Electrical switches embedded in the scoring elements detect contact and relay this information to the scoring mechanism. Older pinball machines used an
electromechanical system for scoring wherein a pulse from a switch would cause a complex mechanism composed of
relays to ratchet up the score. In later games these tasks have been taken over by
semiconductor chips and displays are made on electronic segmented or
dot-matrix displays.
Pinball scoring can be peculiar and varies greatly from machine to machine. During the 1930s and the 1940s, lights mounted behind the painted backglasses were used for scoring purposes, making the scoring somewhat arbitrary. (Frequently the lights represented scores in the hundreds of thousands.) Then later, during the 1950s and 1960s when the scoring mechanism was limited to mechanical wheels, high scores were frequently only in the hundreds ''or'' thousands. (Although, in an effort to keep with the traditional high scores attained with the painted backglass games, the first pinball machines to use mechanical wheels for scoring, such as Army Navy, allowed the score to reach into the millions by adding a number of permanent zeros to the end of the score.) The average score changed again in the 1970s with the advent of electronic displays. Average scores soon began to commonly increase back into tens or hundreds of thousands. Since then, there has been a trend of scoring inflation, with modern machines often requiring scores of over a billion points to win a free game. At the peak of this trend, two machines, Johnny Mnemonic and Attack From Mars, have been played into the trillions. Another recent curiosity is the 1997 Bally game NBA Fastbreak which, true to its theme, awards points in terms of a real basketball score: Each successful shot can give from one to three points. Getting a hundred points by the end of a game is considered respectable, which makes it one of the ''lowest'' scoring pinball machines of all time. The inflated scores are the source of one of the Spanish-language names of pinball machines, ''máquina del millón'' ("million machine").
Special scores
High score lists: If a player attains one of the highest scores ever (or the highest score on a given day), he is invited to add his initials to a displayed list of high-scorers on that particular machine. "Bragging rights" associated with being on the high-score list are a powerful incentive for experienced players to master a new machine.
Pinball designers also entice players with the chance to win an extra game or ''replay''. Ways to get a replay might include the following:
''Replay Score'': An extra game is rewarded if the player exceeds a specified score. Some machines allow the operator to set this score to increase with each consecutive game in which the replay score is achieved, in order to prevent a skilled player from gaining virtually unlimited play on one credit by simply achieving the same replay score in every game.
''Special'': A mechanism to get an extra game during play is usually called a "special". Typically, some hard-to-reach feature of the game will light the outlanes (the areas to the extreme left and right of the flippers) for special. Since the outlanes always lose the ball, having "special" there makes it worth shooting for them (and is usually the only time, if this is the case).
''Match'': At the end of the game, if the last two digits of the player's score match a random digit followed by zero, an extra game is rewarded. As pinball scores on modern machines nearly always end in zero, the chances of this happening appear to be 1 in 10, but the operator can alter this probability — the default is usually 7% in all modern Williams and Bally games for example. Other non-numeric methods are sometimes used to award a match. In earlier machines, before a phenomenon often referred to as ''score inflation'', had happened (causing almost all scores to end in 0) and scores could end in any integer, the match function was often a random integer from 0 to 9 that had to match the last digit in the score.
''High Score'': Most machines award 1-3 free games if a player gets on the high score list. Typically, one or two credits are awarded for a 1st-4th place listing, and three for the Grand Champion.
When an extra game is won, the machine typically makes a single loud bang, most often with a solenoid that strikes a piece of metal, or the side of the cabinet, with a rod, known as a ''knocker'', or less commonly with loudspeakers. "Knocking" is the act of winning an extra game when the knocker makes the loud and distinctive noise.
Playing techniques
The primary skill of pinball involves application of the proper timing and technique to the operation of the flippers, nudging the playfield when appropriate without tilting, and choosing targets for scores or features. A skilled player can quickly "learn the angles" and gain a high level of control of ball motion, even on a table they've never played. Skilled players can often play on a machine for long periods of time on a single coin. By earning extra balls, a single game can be stretched out for a long period, and if the player is playing well he or she can earn replays by points and possibly also free games, known as "specials".
A placard is usually placed in a lower corner of the playfield. It may simply show pricing information, but should also show critical details about special scoring techniques. This information is vital to achieving higher scores; it typically describes a series of events that must take place (e.g., shoot right ramp and left drop targets to light 'extra ball' rollover). Learning these details makes the game more fun and challenging. With practice—and a table in good operating condition—a player can often achieve specific targets and higher scores as well as trigger exciting events.
Nudging
Skillful players can influence the movement of the ball by nudging or bumping the pinball machine, a technique known as "nudging." There are tilt mechanisms which guard against excessive manipulation of this sort. The mechanisms generally include:
a grounded plumb bob centered in an electrified steel ring - when the machine is jostled too far or too hard, the bob bumps up against the ring, completing a circuit. The bob is usually cone-shaped allowing the operator to slide it up or down, controlling the sensitivity of the bob;
an electrified ball on a slight ramp with a grounded post at the top of the ramp - when the front of the machine is lifted (literally, tilted) too high, the ball rolls to the top of the ramp and completes the circuit; and
an impact sensor – usually located on the coin door, the playfield and/or the cabinet itself.
When one of these sensors is activated, the game registers a "tilt" and locks out, disabling solenoids for the flippers and other playfield systems so that the ball can do nothing other than roll all the way down the playfield to the drain. A tilt will usually also result in the loss of any bonus points earned by the player during that ball. Older games would immediately end the ball in play on a tilt. Modern games give tilt warnings before sacrificing the ball in play. The number of tilt warnings can be adjusted by the operator/owner of the machine. Until recently most games also had a "slam tilt" switch which guarded against kicking or slamming the coin mechanism (or for overly aggressive behavior with the machine), which could give a false indication that a coin had been inserted, thereby giving a free game or credit. Apparently, this feature was recently taken out by default in new Stern S.A.M System games. However, it can be added as an option. A slam tilt will typically end the current game for all players.
Trapping
Skilled players can also hold a ball in place with the flipper, giving them more control over where they want to place the ball when they shoot it forward. This is known as "trapping". This technique involves catching the ball in the corner between the base of the flipper and the wall to its side, just as the ball falls towards the flipper; the flipper is then released, which allows the ball to roll slowly downward against the flipper. The player then chooses the moment to hit the flipper again, timing the shot as the ball slides slowly against the flipper. Multi-ball games, in particular, reward trapping techniques. Usually this is done by trapping one or more balls out of play with one flipper, then using the other flipper to score points with the remaining ball or balls.
Once a player has successfully trapped a ball, they may then attempt to "juggle" the ball to the other flipper. This is done by tapping the flipper button quickly enough so that the trapped ball is knocked back at an angle of less than 90 degrees into the bottom of the nearest slingshot. The ball will then often bounce across the table to the other flipper, where the ball may then be hit (or trapped) by the opposite flipper.
Occasionally a pinball machine will have a pin or post placed directly between the two bottom flippers. When this feature is present, the advanced player may then attempt to perform a "chill maneuver" when the ball is heading directly toward the pin by opting ''not'' to hit a flipper. If successful, this will cause the ball to bounce up and back into play. A related move, the "dead flipper pass," is performed by ''not'' flipping when a ball is heading toward a flipper. If done properly, the ball will bounce off the "dead" flipper, across to the other flipper, where it may be trapped and controlled.
One controversial technique for saving the ball is called a "death save" or "bangback". Very few pinball players can successfully perform this advanced technique. The death save may only be performed when a ball has dropped through an outlane and is heading down toward the drain. If the timing is exactly correct, a player may hold a flipper up and then nudge the machine hard enough (but not so hard as to tilt the machine) to pop the ball back up into play on to the opposite flipper. Usually the death save is performed by kicking one of the legs of the machine with great force, which is why the move is unpopular with many players, and is often strongly frowned upon by less-experienced arcade operators. More recent machines have recognized this maneuver as a legitimate one though, even going so far as to grant the player a point reward for a successful death save.
Cheating
A player may try to obtain free games by attaching a piece of string to a coin and lowering it to the counter switch, then raise and lower it to obtain free credits. This is actually quite difficult to do, since a coin acceptor mechanism is designed to reject anything other than a true coin, and uses thickness, diameter, weight and inertia as tests. A slow-moving coin on a string is simply treated as a
slug and rejected.
Slugs made from hammered metal pieces or foreign coins are sometimes tried. An operator can modify the acceptor mechanism to be less forgiving and so reject further attempts.
Electromechanical pinball machines manufactured by Williams (until approximately 1973) had a wiring anomaly which could be exploited with one or more credits remaining on the game reel. By depositing a single coin and pressing the reset button one-quarter to one-half second later, up to five games could be obtained.
Some early (late '70s) computerized games could be fooled into giving free credits by switching the power off and on quickly, or applying a static shock to the coin door. These issues were quickly fixed, and today, may cause existing credits to be removed.
Sometimes, a faulty playfield item will bounce or switch to rack up extra points that are not earned. The result is that a solenoid may be destroyed in the process of constant triggering.
Gottlieb machines had a mechanical game counter (like an odometer) that could be advanced with a long-handled 'ladies' comb wedged under the back panel cover to manipulate the counter mechanism.
Competition
In 1974, students at
Jersey City State College wanted to make pinball playing a varsity school sport, like
football was, so they started a Pinball Club Team to compete against clubs at other schools. They asked two other schools to participate.
St. Peter's College took up the challenge, while the other school did not.
Many pinball leagues have formed, with varying levels of competitiveness, formality and structure. These leagues exist everywhere from the Free State Pinball Association (FSPA) in the Washington, DC area to the Tokyo Pinball Organization (TPO)] in Japan. In the late 1990s, game manufacturers added messages to some games encouraging players to join a local league, providing website addresses for prospective league players to investigate.
Competitive pinball has become increasingly popular in recent years, with the relaunch of both the Professional and Amateur Pinball Association (PAPA) and the International Flipper Pinball Association (IFPA).
Two different systems for ranking pinball players exist. The World Pinball Player Rankings (WPPR) was created by the IFPA. The WPPR formula takes into account the quantity and quality of the players in the field, and awards points based on that calculation for the nearly 200 IFPA endorsed events worldwide. PAPA manages a ranking system known as the PAPA Advanced Rating System (PARS), which uses the Glicko Rating System to mathematically analyze the results of more than 100,000 competitive matches. In 2008 and again in 2009, the IFPA held a World Championship tournament, inviting the top-ranked WPPR players to compete; the winner both years was Bowen Kerins of the USA.
PAPA also designates the winner of the A Division in the annual PAPA World Pinball Championships as the World Pinball Champion; the current holder of this title (three years running) is Keith Elwin from the USA. Current Junior (16 and under) and Senior (50 and over) World Champions are Joshua Henderson and Joe Schall, respectively.
Manufacturing process
The pinball machine is first constructed with the wiring for the game’s electronic system. It starts off with a color-coded wiring arrangement that is wrapped around pins and connectors on the circuit board. On average one machine carries almost a half of mile of wire. It is then up to technicians to follow a meticulous set of instructions from a diagram that has been engineered to keep things from getting confused. During this time the playing field is set onto foam strips and a bed of nails. The nails are then pressed in the playing board as the bed raises and compress them against the header. Following come the anchors that is then hammered into place. The anchors help secure a metal railing that keeps the balls from exiting the playing field.
After the main construction is processed, it then comes down to fitting a few lampposts, some plastic bumpers, and one hundred and fifteen flashing lights. All of the wiring is permanently fastened and speakers are bolted into the cabinet. Along with this comes the most crucial tool, the spring power plunger, which is set into place.
Finally, a few other toys and gimmicks are added, such as toy villains and other small themed characters. Once everything is tested and seems to be running alright, the playfield is set on top of the lower box. The lower box on computerized games is essentially empty. On older electromechanical games, the entire floor of the lower box was used to mount custom relays and special scoring switches, making older games much heavier. To protect the top of the playfield, a tempered glass window is installed, secured by a metal bar that is locked into place. The expensive, unique, painted vertical backglass is fragile. The backglass covers the custom microprocessor boards on newer games, or electromechanical scoring wheels on older games. On older games, a broken backglass might be impossible to replace, ruining the game's appeal.
Solenoids
''Solenoids or coils'': These are found in every modern pinball machine since the flipper age. They are usually hidden under the playfield, or covered by playfield components. By applying power to the coil, the magnetic field created by electromagnetism causes a metal object (usually called a plunger) to move. The plunger is then connected mechanically to a feature or accessory on the playfield.
Flipper solenoids contain two coil windings in one package; a short, heavy gage 'power' winding to give the flipper its initial thrust up, and a long, light gage 'hold' winding that uses lower power (and creates far less heat) and essentially just holds the flipper up allowing the player to capture the ball in the inlane for more precise aiming. As the flipper nears the end of its upward travel, a switch under the flipper disconnects the power-winding and leaves only the second sustain winding to hold the flipper up in place. If this switch fails 'open' the flipper will be too weak to be usable, since only the weak winding is available. If it fails 'closed' the coil will overheat and destroy itself, since both windings will hold the flipper at the top of its stroke.
Solenoids also control pop-bumpers, kickbacks, drop target resets, and many other features on the machine. These solenoid coils contain a single coil winding. The plunger size and wire gage & length are matched to the strength required for each coil to do its work, so some types are repeated throughout the game, some are not.
All solenoids and coils used on microprocessor games include a special reverse-biased diode to eliminate a high-voltage pulse of reverse EMF (electromagnetic force). Without this diode, when the solenoid is de-energized, the magnetic field that was built up in the coil collapses and generates a brief, high-voltage pulse backward into the wiring, capable of destroying the solid-state components used to control the solenoid. Proper wiring polarity must be retained during coil replacement or this diode will act as a dead short, immediately destroying electronic switches. Older electromechanical game solenoids do not require this diode, since they were controlled with mechanical switches.
All but very old games use low DC voltages to power the solenoids and electronics (or relays). Some microprocessor games use high voltages (potentially hazardous) for the score displays. Very early games used low-voltage AC power for solenoids, requiring fewer components, but AC is less efficient for powering solenoids, causing heavier wiring and slower performance. For locations that suffer from low AC wall outlet voltage, additional taps may be provided on the AC transformer in electromechanical games to permit raising the game's DC voltage levels, thus strengthening the solenoids. Microprocessor games have electronic power supplies that automatically compensate for inaccurate AC supply voltages.
Computer pinball simulation
Simulating a pinball machine has also been a popular theme of
computer games, most famously when
Bill Budge wrote ''
Pinball Construction Set'' for the
Apple II in 1983. While there had been earlier pinball video games, such as ''
Video Pinball'' for the
Atari 2600, ''Pinball Construction Set'' was the first program that allowed the user to create his own simulated pinball machine and then play it.
Most early simulations were top-down 2D. As processor and graphics capabilities have improved, more accurate ball physics and 3D pinball simulations have become possible. Tilting has also been simulated, which can be activated using one or more keys (sometimes the space bar) for "moving" the table. Flipper button computer peripherals were also released, allowing pinball fans to add an accurate feel to their game play instead of using the keyboard or mouse. Modern pinball video games are often based around established franchises such as Metroid Prime Pinball, Super Mario Ball and Sonic the Hedgehog Spinball
There have been pinball programs released for all major home video game and computer systems, such as: David's Midnight Magic, Pinball Dreams, 3D Pinball: Space Cadet, Visual Pinball, Future Pinball and Pinball FX 2. Simulators also exist for gaming consoles such as Xbox, PlayStation 2, PlayStation Portable and Wii.
Pinball in popular culture
Pinball games have frequently been featured in
popular culture, often as a symbol of rebellion or toughness. Perhaps the most famous instance is the
rock opera album ''
Tommy'' (1969) by
The Who, which centers on the title character, a "deaf, dumb, and blind kid", who nevertheless becomes a "
Pinball Wizard" and who later uses pinball as a symbol and tool for his messianic mission. (The album was subsequently made into a
movie and
stage musical.) ''Wizard'' has since moved into popular usage as a term for an expert pinball player. Things came full circle when Bally created the
Tommy Pinball Wizard pinball game featuring
Ann-Margret and The Who's
Roger Daltrey on the backglass. In the movie version, Tommy plays a Gottlieb ''Kings and Queens'' machine, while The Champ plays a Gottlieb ''Buckaroo'' machine. In 1976, Bally released "Capt.Fantastic", which had an image of Elton John on the backglass, playing pinball in a similar costume as used in the movie Tommy.
Other examples of pinball in pop culture include:
In the 1944 movie, ''Sensations of 1945'', Eleanor Powell tap dances as a pinball in a song and dance number called, "Spin Little Pinball" which was written by songwriters Al Sherman and Harry Tobias.
In the 1948 movie ''The Time of Your Life'' one of the characters was called "Willie, the Marbler Game Maniac". After repeated attempts he eventually wins. With a fanfare, the backglass descends to reveal a winning screen, American flags pop out from the side of the machine, and fireworks erupted from the back. He is awarded six nickels by the bartender, and says, "With a little skill a man can make an honest living beating the marble games."
Singer/Songwriter Lonnie Irving's song "Pinball Machine" made the Top 100 Singles Chart in March 1960 on the Starday label. The lyrics are the lament of a victim of an addiction to truck driving and pinball machines.
"Pinball Blues", performed by Charlie Moore & Bill Napier.
The band Cook County merged composer Cy Coleman's "Playboy's Theme" with the electronic sounds of the Bally "Playboy" pinball machine to create the song "Pinball Playboy" in 1979.
The 1973 movie ''Heavy Traffic'', directed by Ralph Bakshi, uses pinball imagery as a metaphor for inner-city life.
The 1973 movie ''The Final Programme'' has a club in which couples enter transparent balls and roll them around on a playing field the size of a dance hall.
The 1973 song 4th Of July, Asbury Park (Sandy) by Bruce Springsteen features the lyrics, "And the wizards play down on Pinball Way on the boardwalk way past dark."
The 1979 movie ''Tilt'' starring Brooke Shields as a young pinball wizard.
The 1970s TV game show ''The Magnificent Marble Machine'' featured a giant pinball machine.
The 1974 song Pinball was a minor Top 40 hit in the UK for Singer/songwriter Brian Protheroe.
''Happy Days''' Arthur "Fonzie" Fonzarelli often played a "Nip-It" pinball at Arnold's Drive-In. Although the show was set in the 1950s, Nip-It was only created in the 1970s. Williams' Klondike (1971) and Bally's Space Time (1972) were also shown in the TV series.
The 1982 movie ''The Verdict'' portrays pinball as the quintessential barfly game.
In the Three Stooges short film "Three Little Pirates" there is a scene where the boys happen upon a pinball machine and Larry says, "A game of skill", possibly alluding to the then common allegations that pinball was a game of chance.
Episode 13 (Season 1) of the 1990s kids' show ''Are You Afraid of the Dark?'' titled "The Tale of the Pinball Wizard" dealt with a boy with a penchant for pinball games becoming trapped in a pinball game made real.
''Sesame Street'' had a segment called Pinball Number Count where a pinball goes through many different places. The song was sung by The Pointer Sisters.
Monday Night Football introduction played a computer generated pinball with their theme song.
There are many references to pinball on ''The Simpsons''. Sideshow Bob said that his former medium of TV "destroyed more young minds than syphilis and pinball combined."
Blernsball, the futuristic version of baseball in ''Futurama'', features pinball game elements, including captive balls and multiball.
Pinball-themed zones made numerous appearances in the Sonic the Hedgehog series of video games, including an entire game based on the Pinball theme, ''Sonic the Hedgehog Spinball''. Sonic Adventure's Casinopolis had two room that played like Pinball games.
A Pinball-themed courtship is featured in ''Bad Santa'' when Billy Bob Thornton shows the mechanics of the "tilt mechanism."
In the movie ''West Side Story'' one of the gangmembers is playing a pinball machine when the Sharks and Jets meet in the store.
In the Disney movie ''The Game Plan'', Peyton plays a pinball machine when she goes into Joe's house while Joe reads Peyton's birth certificate or letter.
In the movie ''Aquamarine'', the pinball machines "Tee'd Off" and "The Party Zone" appear in one scene.
In an episode of ''South Park'', Indiana Jones is seen playing a ''Howard the Duck'' pinball machine. However, such a pinball has never been built.
In the ''Arthur'' episode "Arthur Accused" on PBS Kids, Arthur, Buster, and Buster's mom go to an arcade. While Buster and his mom looks around, Arthur tries pinball machine and he gets the high score and Buster rushes to him and congratulates him. When he and Buster enter school the next day, Buster shouts,"Pinball Wizard coming through!"
Power metal band Helloween mentions Gorgar, a 1970s pinball machine in their Gorgar song, Part of the Walls of Jericho Album.
The Nickelodeon channel had a pinball in its logo from 1981 to 1984.
The Pinball Machine is mentioned in the song Laugh 'n' a ½ by the danish rock band D-A-D(Disneyland after midnight). "I grew up in a life-size pinball machine".
A pinball-themed introduction was created for the summer 2011 season of ''Hell's Kitchen'' on Fox.
See also
List of pinball machines
Pinball Hall of Fame - Pinball museum located in Las Vegas, Nevada.
Special When Lit - feature documentary about pinball
People
John W. Baumgartner, Los Angeles City Council member, 1933–35, opposed pinball machines
References
Footnotes
Bally's 1981
Elektra also had three playfields, and predated Haunted House. However, Elektra's lower playfield was a self-contained area that used its own captive ball for scoring. Haunted House's lower playfield was accessible during regular gameplay from both the main and upper play areas.
External links
Internet Pinball Database World's largest online searchable database of pinball machines covering over 100 years of manufacturing, with over 47,000 images of over 5,300 games, as well as links to other pinball websites, game related documents, ratings, and user comments.
Pinball.org Rule sheets for most modern titles
Pinside.com Hosting the World Pinball Top 100, an extensive system that lets players rate games on many different aspects (design, sounds, flow, etc..). Also home of the Solid State Pinball Archive, a place to manage and showcase your collection and put your self on the World Pinball Map.
1
ar:كرة و دبابيس
de:Flipperautomat
es:Pinball
eo:Flipero
fr:Flipper
ko:핀볼
hr:Fliper stroj
it:Flipper
he:פינבול
nl:Flipperkast
ja:ピンボール
no:Flipperspill
pl:Flipper
pt:Pinball
ro:Flipper
ru:Пинбол
simple:Pinball
szl:Flipper
fi:Flipperi
sv:Flipperspel
th:พินบอล
uk:Пінбол
zh:彈珠台
