at
Yamanashi,
Japan test track in November 2005]]
09 at the
Emsland test facility in
Germany]]
Maglev (derived from
magnetic levitation), is a system of transportation that suspends, guides and propels vehicles, predominantly trains, using magnetic levitation from a very large number of magnets for lift and propulsion. This method has the potential to be faster, quieter and smoother than wheeled
mass transit systems. The power needed for levitation is usually not a particularly large percentage of the overall consumption; most of the power used is needed to overcome air
drag, as with any other high speed train.
The highest recorded speed of a Maglev train is , achieved in Japan in 2003,
Perhaps the most well known implementation of high-speed maglev technology currently operating commercially is the Shanghai Maglev Train, an IOS (initial operating segment) demonstration line of the German-built Transrapid train in Shanghai, China that transports people 30 km (19 mi) to the airport in just 7 minutes 20 seconds, achieving a top speed of , averaging .
History
First patents
High-speed transportation patents were granted to various inventors throughout the world. Early United States patents for a
linear motor propelled train were awarded to the inventor,
Alfred Zehden (German). The inventor was awarded (June 21, 1907) and (August 21, 1907). In 1907, another early electromagnetic
transportation system was developed by F. S. Smith. A series of German patents for magnetic levitation trains propelled by linear motors were awarded to
Hermann Kemper between 1937 and 1941. An early modern type of maglev train was described in ,
Magnetic system of transportation, by G. R. Greenfly (August 25, 1959). The first use of "maglev" in a United States patent was in "
Magnetic levitation guidance system" by Canadian Patents and Development Limited.
Development
In the late 1940s, Professor
Eric Laithwaite of
Imperial College in London developed the first full-size working model of the
linear induction motor. He became professor of heavy electrical engineering at Imperial College in 1964, where he continued his successful development of the linear motor. As the linear motor does not require physical contact between the vehicle and guideway, it became a common fixture on many advanced transportation systems being developed in the 1960s and 70s. Laithwaite himself joined development of one such project, the
Tracked Hovercraft, although funding for this project was cancelled in 1973.
The linear motor was naturally suited to use with maglev systems as well. In the early 1970s, Laithwaite discovered a new arrangement of magnets that allowed a single linear motor to produce both lift as well as forward thrust, allowing a maglev system to be built with a single set of magnets. Working at the British Rail Research Division in Derby, along with teams at several civil engineering firms, the "traverse-flux" system was developed into a working system.
New York, United States 1968
In 1961, when he was delayed during rush hour traffic on the
Throgs Neck Bridge,
James Powell, a researcher at
Brookhaven National Laboratory (BNL), thought of using magnetically levitated transportation to solve the traffic problem. Powell and BNL colleague
Gordon Danby jointly worked out a MagLev concept using static magnets mounted on a moving vehicle to induce electrodynamic lifting and stabilizing forces in specially shaped loops on a guideway.
Hamburg, Germany 1979
Transrapid 05 was the first maglev train with longstator propulsion licensed for passenger transportation. In 1979, a 908 m track was opened in
Hamburg for the first
International Transportation Exhibition (IVA 79). There was so much interest that operations had to be extended three months after the exhibition finished, having carried more than 50,000 passengers. It was reassembled in
Kassel in 1980.
Birmingham, United Kingdom 1984–1995
The world's first commercial automated maglev system was a low-speed maglev shuttle that ran from the airport terminal of
Birmingham International Airport to the nearby
Birmingham International railway station between 1984–1995. The length of the track was , and trains "flew" at an altitude of , levitated by electromagnets, and propelled with linear induction motors. It was in operation for nearly eleven years, but
obsolescence problems with the electronic systems made it unreliable in its later years. One of the original cars is now on display at
Railworld in Peterborough, while the
RTV31 hover train vehicle is preserved on the
Nene Valley Railway in Peterborough.
Several favourable conditions existed when the link was built:
The British Rail Research vehicle was 3 tonnes and extension to the 8 tonne vehicle was easy.
Electrical power was easily available.
The airport and rail buildings were suitable for terminal platforms.
Only one crossing over a public road was required and no steep gradients were involved.
Land was owned by the railway or airport.
Local industries and councils were supportive.
Some government finance was provided and because of sharing work, the cost per organization was not high.
After the original system closed in 1995, the original guideway lay dormant. The guideway was reused in 2003 when the replacement cable-hauled AirRail Link Cable Liner people mover was opened.
Japan 1985-
, Japan test track on 21 December 1979. 517km/h. Guinness World Records authorization at that time.]]
In Japan, there are two independently developed Maglev trains. One is
HSST by
Japan Airlines and the other, which is more well-known, is
JR-Maglev by
Japan Railways Group.
The development of the latter started in 1969, and
Miyazaki test track had regularly hit 517 km/h by 1979 but, after an accident that destroyed the train, a new design was decided upon. Tests through the 1980s continued in Miyazaki before transferring a far larger and elaborate test track (20 km long) in Yamanashi in 1997. In that year, development of
HSST started in 1974, based on technologies introduced from Germany. In
Tsukuba, Japan (1985), the
HSST-03 (
Linimo) wins popularity in spite of being 30 km/h slower at the
Tsukuba World Exposition. In
Okazaki, Japan (1987), the JR-Maglev took a test ride at the Okazaki exhibition. In
Saitama, Japan (1988), the HSST-04-1 was revealed at the Saitama exhibition performed in
Kumagaya. Its fastest recorded speed was 30 km/h. In
Yokohama, Japan (1989), the HSST-05 acquires a business driver's license at Yokohama exhibition and carries out general test ride driving. Maximum speed 42 km/h.
JR-Maglev features 10 centimeter float (approx. 3.9 inch) above the guideway.
Vancouver, Canada, and Hamburg, Germany 1986-1988
In Vancouver, Canada (1986), the JR-Maglev was exhibited at
Expo 86. Guests could ride the train along a short section of track at the fairgrounds. In Hamburg, Germany (1988), the TR-07 in international traffic exhibition (IVA88) performed Hamburg.
Berlin, Germany 1989–1991
In West Berlin, the M-Bahn was built in the late 1980s. It was a driverless maglev system with a 1.6 km track connecting three stations. Testing in passenger traffic started in August 1989, and regular operation started in July 1991. Although the line largely followed a new elevated alignment, it terminated at the U-Bahn station Gleisdreieck, where it took over a platform that was then no longer in use; it was from a line that formerly ran to East Berlin. After the fall of the Berlin Wall, plans were set in motion to reconnect this line (today's U2). Deconstruction of the M-Bahn line began only two months after regular service began that was called Pundai project and was completed in February 1992.
Other patents
High speed transportation patents were also granted to various other inventors throughout the world.
:See also JR-Maglev#Fundamental technology elements, Transrapid#Technology, Magnetic levitation
There are two particularly notable types of maglev technology:
For electromagnetic suspension (EMS), electronically controlled electromagnets in the train attract it to a magnetically conductive (usually steel) track.
Electrodynamic suspension (EDS) uses permanent magnets which create a magnetic field that induces currents in nearby metallic conductors when there is relative movement which pushes the train away from the rail.
Another experimental technology, which was designed, proven mathematically, peer reviewed, and patented, but is yet to be built, is the magnetodynamic suspension (MDS), which uses the attractive magnetic force of a permanent magnet array near a steel track to lift the train and hold it in place. Other technologies such as repulsive permanent magnets and superconducting magnets have seen some research.
Electromagnetic suspension
In current electromagnetic suspension (EMS) systems, the train levitates above a steel rail while
electromagnets, attached to the train, are oriented toward the rail from below. The system is typically arranged on a series of C-shaped arms, with the upper portion of the arm attached to the vehicle, and the lower inside edge containing the magnets. The rail is situated between the upper and lower edges.
Magnetic attraction varies inversely with the cube of distance, so minor changes in distance between the magnets and the rail produce greatly varying forces. These changes in force are dynamically unstable - if there is a slight divergence from the optimum position, the tendency will be to exacerbate this, and complex systems of feedback control are required to maintain a train at a constant distance from the track, (approximately ).
The major advantage to suspended maglev systems is that they work at all speeds, unlike electrodynamic systems which only work at a minimum speed of about 30 km/h. This eliminates the need for a separate low-speed suspension system, and can simplify the track layout as a result. On the downside, the dynamic instability of the system demands high tolerances of the track, which can offset, or eliminate this advantage. Laithwaite, highly skeptical of the concept, was concerned that in order to make a track with the required tolerances, the gap between the magnets and rail would have to be increased to the point where the magnets would be unreasonably large. (Electromagnetic suspension)
|| Magnetic fields inside and outside the vehicle are less than EDS; proven, commercially available technology that can attain very high speeds (500 km/h); no wheels or secondary propulsion system needed.
|| The separation between the vehicle and the guideway must be constantly monitored and corrected by computer systems to avoid collision due to the unstable nature of electromagnetic attraction; due to the system's inherent instability and the required constant corrections by outside systems, vibration issues may occur.
|-
| colspan=5 |
|- valign=top
|
EDS (Electrodynamic suspension)
||
Onboard magnets and large margin between rail and train enable highest recorded train speeds (581 km/h) and heavy load capacity; has demonstrated (December 2005) successful operations using
high-temperature superconductors in its onboard magnets, cooled with inexpensive liquid
nitrogen.
|| Strong magnetic fields onboard the train would make the train inaccessible to passengers with
pacemakers or magnetic data storage media such as hard drives and credit cards, necessitating the use of
magnetic shielding; limitations on guideway inductivity limit the maximum speed of the vehicle; vehicle must be
wheeled for travel at low speeds.
|-
| colspan=5 |
|- valign=top
|
Inductrack System (Permanent Magnet EDS)
||
Failsafe Suspension—no power required to activate magnets; Magnetic field is localized below the car; can generate enough force at low speeds (around 5 km/h) to levitate maglev train; in case of power failure cars slow down on their own safely;
Halbach arrays of permanent magnets may prove more cost-effective than electromagnets.
|| Requires either wheels or track segments that move for when the vehicle is stopped. New technology that is still under development (as of 2008) and as yet has no commercial version or full scale system prototype.
|}
Neither Inductrack nor the Superconducting EDS are able to levitate vehicles at a standstill, although Inductrack provides levitation down to a much lower speed; wheels are required for these systems. EMS systems are wheel-less.
The German Transrapid, Japanese HSST (Linimo), and Korean Rotem EMS maglevs levitate at a standstill, with electricity extracted from guideway using power rails for the latter two, and wirelessly for Transrapid. If guideway power is lost on the move, the Transrapid is still able to generate levitation down to speed, using the power from onboard batteries. This is not the case with the HSST and Rotem systems.
Propulsion
An EDS system can provide both
levitation and
propulsion using an onboard linear motor. EMS systems can only levitate the train using the magnets onboard, not propel it forward. As such, vehicles need some other technology for
propulsion. A linear motor (propulsion coils) mounted in the track is one solution. Over long distances where the cost of propulsion coils could be prohibitive, a
propeller or
jet engine could be used.
Stability
Earnshaw's theorem shows that any combination of static magnets cannot be in a stable equilibrium. However, the various levitation systems achieve stable levitation by violating the assumptions of Earnshaw's theorem. Earnshaw's theorem assumes that the magnets are static and unchanging in field strength and that the relative
permeability is constant and greater than unity everywhere. EMS systems rely on active electronic
stabilization. Such systems constantly measure the bearing distance and adjust the electromagnet current accordingly. All EDS systems are moving systems (no EDS system can levitate the train unless it is in motion).
Because Maglev vehicles essentially fly, stabilisation of pitch, roll and yaw is required by magnetic technology. In addition to rotation, surge (forward and backward motions), sway (sideways motion) or heave (up and down motions) can be problematic with some technologies.
If superconducting magnets are used on a train above a track made out of a permanent magnet, then the train would be locked in to its lateral position on the track. It can move linearly along the track, but not off the track. This is due to the Meissner Effect.
Guidance
Some systems use Null Current systems (also sometimes called Null Flux systems); these use a coil which is wound so that it enters two opposing, alternating fields, so that the average flux in the loop is zero. When the vehicle is in the straight ahead position, no current flows, but if it moves off-line this creates a changing flux that generates a field that pushes it back into line. However, some systems use coils that try to remain as much as possible in the null flux point between repulsive magnets, as this reduces eddy current losses.
Evacuated tubes
Some systems (notably the
swissmetro system) propose the use of vactrains—maglev train technology used in evacuated (airless) tubes, which removes
air drag. This has the potential to increase speed and efficiency greatly, as most of the energy for conventional Maglev trains is lost in air drag.
One potential risk for passengers of trains operating in evacuated tubes is that they could be exposed to the risk of cabin depressurization unless tunnel safety monitoring systems can repressurize the tube in the event of a train malfunction or accident. The Rand Corporation has designed a vacuum tube train that could, in theory, cross the Atlantic or the USA in 20 minutes.
Power and energy usage
Energy for maglev trains is used to accelerate the train, and may be regained when the train slows down ("
regenerative braking"). It is also used to make the train levitate and to stabilise the movement of the train. The main part of the energy is needed to force the train through the air ("
air drag"). Also some energy is used for air conditioning, heating, lighting and other miscellaneous systems.The maglev trains are powered on electromagnetism.
At very low speeds the percentage of power (energy per time) used for levitation can be significant. Also for very short distances the energy used for acceleration might be considerable. But the power used to overcome air drag increases with the cube of the velocity, and hence dominates at high speed (note: the energy needed per mile increases by the square of the velocity and the time decreases linearly.).
Advantages and disadvantages
Compared to conventional trains
Major comparative differences exist between the two technologies. First of all, maglevs are not trains, they are non-contact electronic transport systems, not mechanical friction-reliant rail systems. Their differences lie in maintenance requirements and the reliability of electronic versus mechanically based systems, all-weather operations, backward-compatibility, rolling resistance, weight, noise, design constraints, and control systems.
Maintenance Requirements Of Electronic Versus Mechanical Systems: Maglev trains currently in operation have demonstrated the need for nearly insignificant guideway maintenance. Their electronic vehicle maintenance is minimal and more closely aligned with aircraft maintenance schedules based on hours of operation, rather than on speed or distance traveled. Traditional rail is subject to the wear and tear of miles of friction on mechanical systems and increases exponentially with speed, unlike maglev systems. This basic difference is the huge cost difference between the two modes and also directly affects system reliability, availability and sustainability.
Weight: The weight of the electromagnets in many EMS and EDS designs seems like a major design issue to the uninitiated. A strong magnetic field is required to levitate a maglev vehicle. For the Transrapid, this is about 56 watts per ton. Another path for levitation is the use of superconductor magnets to reduce the energy consumption of the electromagnets, and the cost of maintaining the field. However, a 50-ton Transrapid maglev vehicle can lift an additional 20 tons, for a total of 70 tones, which surprisingly does not consume an exorbitant amount of energy. Most energy use for the TRI is for propulsion and overcoming the friction of air resistance. At speeds over 100 mph, which is the point of a high-speed maglev, maglevs use less energy than traditional fast trains.
Noise: Because the major source of noise of a maglev train comes from displaced air, maglev trains produce less noise than a conventional train at equivalent speeds. However, the psychoacoustic profile of the maglev may reduce this benefit: a study concluded that maglev noise should be rated like road traffic while conventional trains have a 5-10 dB "bonus" as they are found less annoying at the same loudness level.
Design Comparisons: Braking and overhead wire wear have caused problems for the Fastech 360 railed Shinkansen. Maglev would eliminate these issues. Magnet reliability at higher temperatures is a countervailing comparative disadvantage (see suspension types), but new alloys and manufacturing techniques have resulted in magnets that maintain their levitational force at higher temperatures.
As with many technologies, advances in linear motor design have addressed the limitations noted in early maglev systems. As linear motors must fit within or straddle their track over the full length of the train, track design for some EDS and EMS maglev systems is challenging for anything other than point-to-point services. Curves must be gentle, while switches are very long and need care to avoid breaks in current. An SPM maglev system, in which the vehicle is permanently levitated over the tracks, can instantaneously switch tracks using electronic controls, with no moving parts in the track. A prototype SPM maglev train has also navigated curves with radius equal to the length of the train itself, which indciates that a full-scale train should be able to navigate curves with the same or narrower radius as a conventional train.
Control Systems: EMS Maglev needs very fast-responding control systems to maintain a stable height above the track; multiple redundancy is built into these systems in the event of component failure and the Transrapid system has still levitated and operated with fully 1/2 of its magnet control systems shut down. Other maglev systems not using EMS active control are still in the experimental stage, except for the Central Japan Railway's MLX-01 superconducting EDS repulsive maglev system that levitates 11 centimeters above its guideway.
Compared to aircraft
For many systems, it is possible to define a
lift-to-drag ratio. For maglev systems these ratios can exceed that of aircraft (for example
Inductrack can approach 200:1 at high speed, far higher than any aircraft). This can make maglev more efficient per kilometre. However, at high cruising speeds, aerodynamic drag is much larger than lift-induced drag. Jet transport aircraft take advantage of low air density at high altitudes to significantly reduce drag during cruise, hence despite their lift-to-drag ratio disadvantage, they can travel more efficiently at high speeds than maglev trains that operate at sea level (this has been proposed to be fixed by the
vactrain concept). Aircraft are also more flexible and can service more destinations with provision of suitable airport facilities.
Unlike airplanes, maglev trains are powered by electricity and thus need not carry fuel. Aircraft fuel is a significant danger during takeoff and landing accidents. Also, electric trains emit little direct carbon dioxide emissions, especially when powered by nuclear or renewable sources, but more than aircraft if powered by fossil fuels.
Economics
The Shanghai maglev demonstration line cost US$1.2 billion to build. This total includes infrastructure capital costs such as ROW clearing, extensive pile driving, on-site guideway manufacturing, in-situ pier construction every 25 meters, a maintenance facility and vehicle yard, several switches, two stations, operations and control systems, power feed system, cables and inverters, and operational training. Ridership is not a primary focus of this demonstration line, since the Longyang Road station is on the outskirts of Shanghai. Once the line is extended to South Shanghai Train station and Hongqiao Airport station, ridership will be ample enough for the SMT to not only cover O&M; costs, which it already does with its demonstration leg, but it will be able to generate significant revenue.
China aims to limit the cost of future construction extending the maglev line to approximately $18 million per kilometer through new guideway modular manufacturing and construction techniques.
The United States Federal Railroad Administration 2003 Draft Environmental Impact Statement for a proposed Baltimore-Washington Maglev project gives an estimated 2008 capital costs of US$4.361 billion for , or US$111.5 million per mile (US$69.3 million per kilometer). The Maryland Transit Administration (MTA) conducted their own Environmental Impact Statement, and put the pricetag at US$4.9 billion for construction, and $53 million a year for operations.
The proposed Chūō Shinkansen maglev in Japan is estimated to cost approximately US$82 billion to build, with a route blasting long tunnels through mountains. A Tokaido maglev route replacing current Shinkansen would cost some 1/10 the cost, as no new tunnel blasting would be needed, but noise pollution issues would make it infeasible.
The only low-speed maglev (100 km/h) currently operational, the Japanese Linimo HSST, cost approximately US$100 million/km to build. Besides offering improved operation and maintenance costs over other transit systems, these low-speed maglevs provide ultra-high levels of operational reliability and introduce little noise and zero air pollution into dense urban settings.
As maglev systems are deployed around the world, experts expect construction costs to drop as new construction methods are innovated along with economies of scale.
History of maximum speed record by a trial run
1971 - West Germany - Prinzipfahrzeug - 90 km/h
1971 - West Germany - TR-02 (TSST) - 164 km/h
1972 - Japan - ML100 – 60 km/h - (manned)
1973 - West Germany - TR04 - 250 km/h (manned)
1974 - West Germany - EET-01 - 230 km/h (unmanned)
1975 - West Germany - Komet - 401.3 km/h (by steam rocket propulsion, unmanned)
1978 - Japan -
HSST-01 - 307.8 km/h (by supporting rockets propulsion, made in
Nissan, unmanned)
1978 - Japan - HSST-02 - 110 km/h (manned)
1979-12-12 - Japan-ML-500R - 504 km/h (unmanned) It succeeds in operation over 500 km/h for the first time in the world.
1979-12-21 - Japan - ML-500R - 517 km/h (unmanned)
1987 - West Germany - TR-06 - 406 km/h (manned)
1987 - Japan - MLU001 - 400.8 km/h (manned)
1988 - West Germany - TR-06 - 412.6 km/h (manned)
1989 - West Germany - TR-07 - 436 km/h (manned)
1993 - Germany - TR-07 - 450 km/h (manned)
1994 - Japan - MLU002N - 431 km/h (unmanned)
1997 - Japan - MLX01 - 531 km/h (manned)
1997 - Japan - MLX01 - 550 km/h (unmanned)
1999 - Japan - MLX01 - 548 km/h (unmanned)
1999 - Japan - MLX01 - 552 km/h (manned/five formation). Guinness authorization.
2003 - China - Transrapid SMT (built in Germany) - 501.5 km/h (manned/three formation)
2003 - Japan - MLX01 - 581 km/h (manned/three formation). Guinness authorization.
Existing maglev systems
Testing tracks
San Diego, USA
General Atomics has a 120-meter test facility in
San Diego, which is being used as the basis of Union Pacific's 8 km freight shuttle in Los Angeles. The technology is "passive" (or "permanent"), using permanent magnets in a halbach array for lift, and requiring no electromagnets for either levitation or propulsion. General Atomics has received $90 million in research funding from the federal government. They are also looking to apply their technology to high-speed passenger services.
Emsland, Germany
at the
Emsland test facility]]
Transrapid, a German maglev company, has a test track in
Emsland with a total length of . The single track line runs between
Dörpen and
Lathen with turning loops at each end. The trains regularly run at up to . The construction of the test facility began in 1980 and finished in 1984.
JR-Maglev, Japan
Japan has a demonstration line in
Yamanashi prefecture where test trains JR-Maglev MLX01 have reached , slightly faster than any wheeled trains (the current
TGV speed record is ).
These trains use superconducting magnets which allow for a larger gap, and repulsive-type electrodynamic suspension (EDS). In comparison Transrapid uses conventional electromagnets and attractive-type electromagnetic suspension (EMS). These "Superconducting Maglev Shinkansen", developed by the Central Japan Railway Company (JR Central) and Kawasaki Heavy Industries, are currently the fastest trains in the world, achieving a record speed of on December 2, 2003. Yamanashi Prefecture residents (and government officials) can sign up to ride this for free, and some 100,000 have done so already.
FTA's UMTD program
In the US, the
Federal Transit Administration (FTA) Urban Maglev Technology Demonstration program has funded the design of several low-speed urban maglev demonstration projects. It has assessed HSST for the
Maryland Department of Transportation and maglev technology for the Colorado Department of Transportation. The FTA has also funded work by
General Atomics at
California University of Pennsylvania to demonstrate new maglev designs, the MagneMotion M3 and of the Maglev2000 of Florida superconducting EDS system. Other US urban maglev demonstration projects of note are the LEVX in Washington State and the Massachusetts-based Magplane.
Southwest Jiaotong University, China
On 31 December 2000, the first crewed high-temperature superconducting maglev was tested successfully at
Southwest Jiaotong University, Chengdu, China. This system is based on the principle that bulk high-temperature superconductors can be levitated or suspended stably above or below a permanent magnet. The load was over 530 kg (1166
lb) and the levitation gap over 20 mm (0.79 in). The system uses
liquid nitrogen, which is very cheap, to cool the
superconductor.
Operational systems servicing the public
Linimo (Tobu Kyuryo Line, Japan)
The commercial
automated "Urban Maglev" system commenced operation in March 2005 in
Aichi, Japan. This is the nine-station 8.9 km long Tobu-kyuryo Line, otherwise known as the
Linimo. The line has a minimum operating radius of 75 m and a maximum gradient of 6%. The linear-motor magnetic-levitated train has a top speed of . The line serves the local community as well as the
Expo 2005 fair site. The trains were designed by the Chubu HSST Development Corporation, which also operates a test track in Nagoya.
Shanghai Maglev Train
Transrapid, in Germany, constructed the first operational high-speed conventional maglev railway in the world, the Shanghai Maglev Train from downtown Shanghai (
Shanghai Metro) to the
Pudong International Airport. It was inaugurated in 2002. The highest speed achieved on the Shanghai track has been 501 km/h (311 mph), over a track length of 30 km. Despite the speeds, the maglev has been criticised as having few stops and a questionable commercial success. Construction of an extension to Hangzhou was planned to be finished in 2010, but has been postponed in favour of a conventional high speed railway running at 350 km/h. The Shanghai municipal government was considering building the maglev line extension underground to allay the public's fears of
electromagnetic pollution; this same report states that the final decision has to be approved by the National Development and Reform Commission.
Daejeon, South Korea
The first maglev utilizing electromagnetic suspension opened to public was HML-03, which was made by Hyundai Heavy Industries, for Daejeon Expo in 1993 after five years of research and manufacturing two prototypes; HML-01 and HML-02. Research for urban maglev using electromagnetic suspension began in 1994 by the government. Meanwhile UTM-02 remarked an innovation by conducting the world's first ever maglev simulation. However UTM-02 is still the second prototype of a final model. The final UTM model of Rotem's urban maglev, UTM-03, is scheduled to debut at the end of 2012 in Incheon's Yeongjong island where Incheon International Airport is located.
Under construction
Old Dominion University
Track of less than a mile in length has been constructed at
Old Dominion University in
Norfolk, Virginia, USA. Although the system was initially built by AMT, problems caused the company to abandon the project and turn it over to the University. This system uses a "smart train, dumb track" that involves most of the sensors, magnets, and computation occurring on the train rather than the track. This system will cost less to build per mile than existing systems. The $14 million originally planned did not allow for completion. The system is currently not operational, but research has proved useful. In October 2006, the research team performed an unscheduled test of the car that went smoothly. The whole system, unfortunately, was removed from the power grid for nearby construction. In February 2009, the team was able to retest the sled, or bogie, and was again successful despite power outages on campus. Tests will continue, increasing both speed and distance. Meanwhile, ODU has partnered with a Massachusetts-based company to test another maglev train on its campus. MagneMotion Inc. is expected to bring its prototype maglev vehicle, which is about the size of a van, to the campus to test in early 2010.
AMT Test Track - Powder Springs, Georgia
The same principle is involved in the construction of a second prototype system in Powder Springs, Georgia, USA, by
American Maglev Technology, Inc.
Applied Levitation/Fastransit Test Track - Santa Barbara, California
Applied Levitation, Inc. has built a levitating prototype on a short indoor track, and is now planning a quarter-mile outdoor track, with switches, in or near Santa Barbara.
Beijing S1 Line
The Beijing municipal government is building China's first low-speed maglev line using technology developed by Defense Technology University. This is the 10.2 km long S1-West commuter rail line, which, together with seven other conventional lines, saw construction began on Feb. 28, 2011. Top speed will be 105 km/h. It is scheduled to be completed in two years.
Proposed systems
Many maglev systems have been proposed in various nations of North America, Asia, and Europe. Many are still in the early planning stages, or even mere speculation, as with the
transatlantic tunnel. But a few of the following examples have progressed beyond that point.
Australia
Sydney-Illawarra Maglev Proposal
There is a current proposal for a Maglev route between
Sydney and
Wollongong.
The proposal came to prominence in the mid-1990s. The Sydney - Wollongong commuter corridor is the largest in Australia, with upwards of 20,000 people commuting from the Illawarra to Sydney for work each day. Current trains crawl along the dated Illawarra line, between the cliff face of the Illawarra escarpment and the Pacific Ocean, with travel times about two hours between Wollongong Station and Central. The proposed Maglev would cut travel times to 20 minutes.
Melbourne Maglev Proposal
through Metropolitan Melbourne's outer suburban growth corridors, Tullamarine and Avalon domestic in and international terminals in under 20 mins and on to
Frankston, Victoria in under 30 minutes.]]
In late 2008, a proposal was put forward to the
Government of Victoria to build a privately funded and operated Maglev line to service the
Greater Melbourne metropolitan area in response to the
Eddington Transport Report which neglected to investigate above ground transport options. The Maglev would service a population of over 4 million and the proposal was costed at
A$8 billion.
However despite relentless road congestion and the highest roadspace per capita Australia, the government quickly dismissed the proposal in favour of road expansion including an A$8.5 billion road tunnel, $6 billion extension of the Eastlink to the Western Ring Road and a $700 million Frankston Bypass.
United Kingdom
London – Glasgow: A maglev line was recently proposed in the United Kingdom from
London to
Glasgow with several route options through the Midlands, Northwest and Northeast of England and was reported to be under favourable consideration by the government. But the technology was rejected for future planning in the Government
White Paper Delivering a Sustainable Railway published on 24 July 2007. Another high speed link is being planned between Glasgow and Edinburgh but there is no settled technology for it.
Iran
Iran and a German company have reached an agreement on using maglev trains to link the cities of
Tehran and
Mashhad. The agreement was signed at the Mashhad International Fair site between Iranian Ministry of Roads and Transportation and the German company. Maglev trains can reduce the 900 km travel time between Tehran and Mashhad to about 2.5 hours. Munich-based Schlegel Consulting Engineers said they had signed the contract with the Iranian ministry of transport and the governor of Mashad. "We have been mandated to lead a German consortium in this project," a spokesman said. "We are in a preparatory phase." The next step will be assemble a consortium, a process that is expected to take place "in the coming months," the spokesman said. The project could be worth between 10 billion and 12 billion euros, the Schlegel spokesman said. Siemens and ThyssenKrupp, the developers of a high-speed maglev train, called the Transrapid, both said they were unaware of the proposal. The Schlegel spokesman said Siemens and ThyssenKrupp were currently "not involved." in the consortium
Japan
Tokyo — Nagoya — Osaka
The plan for the
Chūō Shinkansen bullet train system was finalized based on the Law for Construction of Countrywide Shinkansen. The Linear Chuo Shinkansen Project aims to realize this plan using the Superconductive Magnetically Levitated Train, which connects
Tokyo and
Osaka by way of
Nagoya, the capital city of
Aichi, in approximately one hour at a speed of 500 km/h. In April 2007,
JR Central President Masayuki Matsumoto said that JR Central aims to begin commercial maglev service between Tokyo and Nagoya in the year 2025.
Venezuela
Caracas – La Guaira A maglev train (
TELMAGV) has been proposed to connect the capital city
Caracas to the main port town of
La Guaira and
Simón Bolívar International Airport. No budget has been allocated, pending definition of the route, although a route of between six and nine kilometres has been suggested. The proposal envisages that, initially, a full-sized prototype train would be built with about one kilometre of test track.
In proposing a maglev system, its improved life and performance over mechanical engines were cited as important factors, as well as improving comfort, safety, economics and environmental impact over conventional rail.
China
Shanghai – HangzhouChina is planning to extend the existing
Shanghai Maglev Train, initially by some 35 kilometers to
Shanghai Hongqiao Airport and then 200 kilometers to the city of Hangzhou (
Shanghai-Hangzhou Maglev Train). If built, this would be the first
inter-city maglev rail line in commercial service.
The project has been controversial and repeatedly delayed. In May 2007 the project was suspended by officials due to concerns about radiation from the maglev system. In January and February 2008 hundreds of residents demonstrated in downtown Shanghai against the line being built too close to their homes, citing concerns about sickness due to exposure to the strong magnetic field, noise, pollution and devaluation of property near to the lines. Final approval to build the line was granted on 18 August 2008. Originally scheduled to be ready by Expo 2010, current plans call for construction to start in 2010 for completion by 2014. The Shanghai municipal government has considered multiple options, including building the line underground to allay the public's fear of electromagnetic pollution. This same report states that the final decision has to be approved by the National Development and Reform Commission.
The Shanghai municipal government may also build a factory in Nanhui district to produce low-speed maglev trains for urban use.
India
Mumbai – DelhiA maglev line project was presented to the Indian railway minister (
Lalu Prasad Yadav) by an American company. A line was proposed to serve between the cities of
Mumbai and
Delhi, the Prime Minister
Manmohan Singh said that if the line project is successful the Indian government would build lines between other cities and also between Mumbai centre and Chhatrapati Shivaji International Airport.
The State of Maharashtra has also approved a feasibility study for a Maglev train between Mumbai (the commercial capital of India as well as the State government capital) and Nagpur (the second State capital) about 1000 km away. It plans to connect the regions of Mumbai and Pune with Nagpur via less developed hinterland (via Ahmednagar, Beed, Latur, Nanded and Yavatmal).
United States
Union Pacific Freight Conveyor: Plans are under way by American rail road operator
Union Pacific to build a 4.9 mi (8 km) container shuttle between the ports of Los Angeles and
Long Beach, with UP's Intermodal Container Transfer Facility. The system would be based on "passive" technology, especially well suited to freight transfer as no power is needed on-board, simply a chassis which glides to its destination. The system is being designed by General Atomics. This plan was originally supposed to be part of an I-5 or I-15 expansion plan, but the federal government has ruled it must be separated from interstate public work projects.
Since the federal government decision, private groups from Nevada have proposed a line running from Las Vegas to Los Angeles with stops in Primm, Nevada; Baker, California; and points throughout San Bernardino County into Los Angeles. Southern California politicians have not been receptive to these proposals; many are concerned that a high speed rail line out of state would drive out dollars that would be spent in state "on a rail" to Nevada.
Baltimore-Washington D.C. Maglev: A 39.75 mi (64 km) project has been proposed linking Camden Yards in Baltimore and Baltimore-Washington International (BWI) Airport to Union Station in Washington, D.C. It is said to be in demand for the area due to its current traffic/congestion problems.
The Pennsylvania Project: The Pennsylvania High-Speed Maglev Project corridor extends from the Pittsburgh International Airport to Greensburg, with intermediate stops in Downtown Pittsburgh and Monroeville. This initial project will serve a population of approximately 2.4 million people in the Pittsburgh metropolitan area. The Baltimore proposal is competing with the Pittsburgh proposal for a $90 million federal grant. The purpose of the project is to see if the maglev system can function properly in a U.S. city environment.
San Diego-Imperial County airport: In 2006 San Diego commissioned a study for a maglev line to a proposed airport located in Imperial County. SANDAG says that the concept would be an "airports without terminals", allowing passengers to check in at a terminal in San Diego ("satellite terminals") and take the maglev to Imperial airport and board the airplane there as if they went directly through the terminal in the Imperial location. In addition, the maglev would have the potential to carry high priority freight. Further studies have been requested although no funding has yet been agreed.
Atlanta – Chattanooga: The proposed maglev route would run from Hartsfield-Jackson Atlanta International Airport, run through Atlanta, continue to the northern suburbs of Atlanta, and possibly even extend to Chattanooga, Tennessee. If built, the maglev line would rival Atlanta's current subway system, the Metropolitan Atlanta Rapid Transit Authority (MARTA), the rail system of which includes a major branch running from downtown Atlanta to Hartsfield-Jackson airport.
Germany
On 25 September 2007,
Bavaria announced it would build a high-speed maglev-rail service from the city of
Munich to its
airport. The Bavarian government signed contracts with
Deutsche Bahn and Transrapid with
Siemens and
ThyssenKrupp for the 1.85 billion euro project.
On 27 March 2008, the German Transport minister announced the project had been cancelled due to rising costs associated with constructing the track. A new estimate put the project between 3.2 and 3.4 billion euros.
Switzerland
SwissRapide: The SwissRapide AG together with the SwissRapide Consortium is planning and developing the first Maglev monorail system for intercity traffic between major cities in the country. The SwissRapide Express® is an innovative solution for the coming transportation challenges in Switzerland. As pioneer for large infrastructure projects, SwissRapide is to be financed to 100% by private investors.
In the long-term, the SwissRapide Express® is to connect the major cities north of the Alps between
Geneva and
St. Gallen, including
Lucerne and
Basel. The first projects currently in planning are
Berne –
Zurich,
Lausanne – Geneva as well as Zurich –
Winterthur. The first line (Lausanne – Geneva or Zurich – Winterthur) could go into service as early as 2020.
Swissmetro: An earlier project, Swissmetro, has previously attempted to provide a solution for the transportation challenges in the country. The Swissmetro AG had the technically challenging vision of constructing an underground Maglev rail system, which would have been in a partial vacuum in order to reduce air friction at high speeds. As with SwissRapide, Swissmetro envisioned connecting the major cities in Switzerland with one another. In 2011, Swissmetro AG was dissolved and the IPRs from the organisation were passed onto the EPFL in Lausanne.
Indonesia
There are plans to build a 683 km long maglev rail service between Jakarta and Surabaya. This maglev will have 7 stations including Semarang. PT Maglev Indonesia working together with SNCF, Transrapid Deutschland, and other corporations will begin this construction around 2010.
Significant incidents
There have been two incidents involving fires. The Japanese test train in Miyazaki, MLU002, was completely consumed in a fire in 1991. As a result of the fire, political opposition in Japan claimed maglev was a waste of public money. On 11 August 2006, a fire broke out on the Shanghai commercial Transrapid, shortly after leaving the terminal in Longyang; nobody was injured. The cause is believed to be a fault with the Maglev's electrical system, it has been suggested to have been an onboard battery unit.
On 22 September 2006, a Transrapid train collided with a maintenance vehicle on a test/publicity run in Lathen (Lower Saxony / north-western Germany). Twenty-three people were killed and ten were injured; these were the first fatalities resulting from an accident on a Maglev system. The accident was caused by human error; charges were brought against three Transrapid employees after a year-long investigation.
See also
Ground effect train
Land speed record for railed vehicles
Launch loop would be a maglev system for launching to orbit or escape velocity
Mass driver
Nagahori Tsurumi-ryokuchi Line
Oleg Tozoni is working on a published non linearly stabilised maglev design
Railway
Bombardier Advanced Rapid Transit - Transit systems using Linear induction motors
StarTram - a maglev launch system
Tracked Hovercraft
Notes
Further reading
External links
Urban Maglev
Windana Research
United States Federal Railroad Administration
Applied Levitation
Fastransit
Maglev Net - Maglev News & Information
The International Maglev Board
Transrapid
The UK Ultraspeed Project
Japanese Railway Technical Research Institute (RTRI)
AMLEV MDS System
Magnetic Levitation for Transportation
News of Brazil's Maglev project (in Portuguese)
Maglev Trains Audio slideshow from the National High Magnetic Field Laboratory discusses magnetic levitation, the Meissner Effect, magnetic flux trapping and superconductivity
High speed switching system
Video footage of the Manchester system (the first maglev in passenger service)
Category:Monorails
Category:Electrodynamics
Category:Emerging technology
 046.jpg)
.svg)
.svg)
