DVB-T is an abbreviation for Digital Video Broadcasting — Terrestrial; it is the DVB European-based consortium standard for the broadcast transmission of digital terrestrial television that was first published in 1997 and first broadcast in the UK in 1998. This system transmits compressed digital audio, digital video and other data in an MPEG transport stream, using coded orthogonal frequency-division multiplexing (COFDM or OFDM) modulation.

Basics of DVB-T

DVB-T offers three different modulation schemes (QPSK, 16QAM, 64QAM).

DVB-T has been adopted or proposed for digital television broadcasting by many countries (see map), using mainly VHF 7 MHz and UHF 8 MHz channels whereas Taiwan, Colombia, Panama, Trinidad and Tobago and the Philippines use 6 MHz channels. Examples include the UK's Freeview.

The DVB-T Standard is published as EN 300 744, ''Framing structure, channel coding and modulation for digital terrestrial television''. This is available from the ETSI website, as is ETSI TS 101 154, ''Specification for the use of Video and Audio Coding in Broadcasting Applications based on the MPEG-2 Transport Stream'', which gives details of the DVB use of source coding methods for MPEG-2 and, more recently, H.264/MPEG-4 AVC as well as audio encoding systems. Many countries that have adopted DVB-T have published standards for their implementation. These include the D-book in the UK, the Italian DGTVi, the ETSI E-Book and Scandivia NorDig.

DVB-T has been further developed into newer standards such as DVB-H (Handheld), now in operation, and DVB-T2, which was recently finalised.

DVB-T as a digital transmission delivers data in a series of discrete blocks at the symbol rate. DVB-T is a COFDM transmission technique which includes the use of a Guard Interval. It allows the receiver to cope with strong multipath situations. Within a geographical area, DVB-T also allows single-frequency network (SFN) operation, where two or more transmitters carrying the same data operate on the same frequency. In such cases the signals from each transmitter in the SFN needs to be accurately time-aligned, which is done by sync information in the stream and timing at each transmitter referenced to GPS.

The length of the Guard Interval can be chosen. It is a trade off between data rate and SFN capability. The longer the guard interval the larger is the potential SFN area without creating intersymbol interference (ISI). It is possible to operate SFNs which do not fulfill the guard interval condition if the self-interference is properly planned and monitored.

Technical description of a DVB-T transmitter

With reference to the figure, a short description of the signal processing blocks follows.

; Source coding and MPEG-2 multiplexing (MUX): compressed video, compressed audio, and data streams are multiplexed into MPEG program streams (MPEG-PSs). One or more MPEG-PSs are joined together into an MPEG transport stream (MPEG-TS); this is the basic digital stream which is being transmitted and received by TV sets or home Set Top Boxes (STB). Allowed bitrates for the transported data depend on a number of coding and modulation parameters: it can range from about 5 to about 32 Mbit/s (see the bottom figure for a complete listing). ; Splitter: two different MPEG-TSs can be transmitted at the same time, using a technique called ''Hierarchical Transmission''. It may be used to transmit, for example a standard definition SDTV signal and a high definition HDTV signal on the same carrier. Generally, the SDTV signal is more robust than the HDTV one. At the receiver, depending on the quality of the received signal, the STB may be able to decode the HDTV stream or, if signal strength lacks, it can switch to the SDTV one (in this way, all receivers that are in proximity of the transmission site can lock the HDTV signal, whereas all the other ones, even the farthest, may still be able to receive and decode an SDTV signal). ; MUX adaptation and energy dispersal: the MPEG-TS is identified as a sequence of data packets, of fixed length (188 bytes). With a technique called energy dispersal, the byte sequence is decorrelated. ; External encoder: a first level of error correction is applied to the transmitted data, using a non-binary block code, a Reed-Solomon RS (204, 188) code, allowing the correction of up to a maximum of 8 wrong bytes for each 188-byte packet. ; External interleaver: convolutional interleaving is used to rearrange the transmitted data sequence, in such a way that it becomes more rugged to long sequences of errors. ; Internal encoder: a second level of error correction is given by a punctured convolutional code, which is often denoted in STBs menus as FEC (Forward error correction). There are five valid coding rates: 1/2, 2/3, 3/4, 5/6, and 7/8. ; Internal interleaver: data sequence is rearranged again, aiming to reduce the influence of burst errors. This time, a block interleaving technique is adopted, with a pseudo-random assignment scheme (this is really done by two separate interleaving processes, one operating on bits and another one operating on groups of bits). ; Mapper: the digital bit sequence is mapped into a base band modulated sequence of complex symbols. There are three valid modulation schemes: QPSK, 16-QAM, 64-QAM. ; Frame adaptation: the complex symbols are grouped in blocks of constant length (1512, 3024, or 6048 symbols per block). A frame is generated, 68 blocks long, and a ''superframe'' is built by 4 frames. ; Pilot and TPS signals: in order to simplify the reception of the signal being transmitted on the terrestrial radio channel, additional signals are inserted in each block. Pilot signals are used during the synchronization and equalization phase, while TPS signals (Transmission Parameters Signalling) send the parameters of the transmitted signal and to unequivocally identify the transmission cell. The receiver must be able to synchronize, equalize, and decode the signal to gain access to the information held by the TPS pilots. Thus, the receiver must know this information beforehand, and the TPS data is only used in special cases, such as changes in the parameters, resynchronizations, etc. ; OFDM Modulation: the sequence of blocks is modulated according to the OFDM technique, using 2048, 4096, or 8192 carriers (2k, 4k, 8k mode, respectively). Increasing the number of carriers does not modify the payload bit rate, which remains constant. ; Guard interval insertion: to decrease receiver complexity, every OFDM block is extended, copying in front of it its own end (cyclic prefix). The width of such guard interval can be 1/32, 1/16, 1/8, or 1/4 that of the original block length. Cyclic prefix is required to operate single frequency networks, where there may exist an ineliminable interference coming from several sites transmitting the same program on the same carrier frequency. ; DAC and front-end: the digital signal is transformed into an analogue signal, with a digital-to-analogue converter (DAC), and then modulated to radio frequency (VHF, UHF) by the RF front-end. The occupied bandwidth is designed to accommodate each single DVB-T signal into 5, 6, 7, or 8 MHz wide channels. The base band sample rate provided at the DAC input depends on the channel bandwidth: it is $f\_s\; =\; \backslash frac\{8\}\{7\}\; B$ ''samples/s'', where $B$ is the channel bandwidth expressed in Hz.

Technical description of the receiver

Countries and territories using DVB-T

America

Europe

(experimental - MPEG-4, FEC=2/3, 16 QAM.) (See DVB-T in Croatia.) (MPEG-4 video)

(Uses MPEG-2/MPEG-4) for SD and MPEG-4 for HD transmissions. See DVB-T in Denmark.) :* :* (Nuuk tv) (uses MPEG-4 video) (uses MPEG-2 for SD and MPEG-4 for HD transmissions.) (usually MPEG-2, SD only, Überallfernsehen) (ERT Digital and Digital Union use MPEG-2 but will shift to MPEG-4. Digea and ERT / ERT HD use MPEG-4) (branded MinDigTV, uses H.264/MPEG-4 AVC video exclusively.) (Will use MPEG-4 video, see DVB-T in Ireland.)

(MPEG2 for SD, MPEG 4 AVC for HD) (uses H.264/MPEG-4 AVC) (uses H.264/MPEG-4 AVC) (DVB-T in Macedonia) (uses MPEG-2. MPEG-4 is being tested.) (uses MPEG-2) (Uses MPEG-4) for SD and MPEG-4 for HD transmissions. See DVB-T in Norway.) (Uses MPEG-4/H.264 video; see ''DVB-T in Poland'') (Uses MPEG-4/H.264 video;) (uses MPEG-2 for SD and MPEG-4 for HD transmissions.) (experimental) (testing, will use MPEG-4 video and DVB-T2) (Use MPEG-4 video since 2007. See DVB-T in Slovenia) (Uses DVB-T/MPEG-2 for SD and DVB-T/H.264/MPEG-4 for HD transmissions.) (Uses MPEG-2/MPEG-4) for SD and DVB-T2 with MPEG-4 for HD transmissions. See DVB-T in Sweden.) (experimental) (Uses DVB-T/MPEG-2 for SD and DVB-T2/H.264/MPEG-4 for HD transmissions. See DVB-T in United Kingdom.) (uses DVB-T2/MPEG-4 for all nationwide broadcasts)

Asia & Australia

(In Assessment) (uses MPEG-4/H.264 video) (In Assessment) (Will use MPEG-2 for SD and MPEG-4 for HD transmissions.) (In Assessment) (experimental, may also adopt DMB-T/H, also experimenting with DVB-T2 as of 2011) (see Freeview New Zealand) (In Assessment) (In Assessment) (In Assessment) (Will use MPEG-2 for SD and MPEG-4 for HD transmissions.) (Will use DVB-T , MPEG-2 and MPEG-4.) (pilot service ) (Uses DVB-T/MPEG-2 for SD and DVB-T/H.264/MPEG-4 for HD transmissions.) (Confirm to uses DVB-T2) (Will use MPEG-2 for SD and MPEG-4 for HD transmissions.) (In Assessment)

Africa

See also

Notes

References

External links

Category:DVB