The incandescent light bulb, incandescent lamp or incandescent light globe makes light by heating a metal filament wire to a high temperature until it glows. The hot filament is protected from air by a glass bulb that is filled with inert gas or evacuated. In a halogen lamp, a chemical process returns metal to the filament, extending its life. The light bulb is supplied with electrical current by feed-through terminals or wires embedded in the glass. Most bulbs are used in a socket which supports the bulb mechanically and connects the current supply to the bulb's electrical terminals.

Incandescent bulbs are produced in a wide range of sizes, light output, and voltage ratings, from 1.5 volts to about 300 volts. They require no external regulating equipment, have low manufacturing costs, and work equally well on either alternating current or direct current. As a result, the incandescent lamp is widely used in household and commercial lighting, for portable lighting such as table lamps, car headlamps, and flashlights, and for decorative and advertising lighting.

Some applications of the incandescent bulb use the heat generated by the filament, such as incubators, brooding boxes for poultry, heat lights for reptile tanks, infrared heating for industrial heating and drying processes, and the Easy-Bake Oven toy. This waste heat increases the energy required by a building's air conditioning system.

Incandescent light bulbs are gradually being replaced in many applications by other types of electric lights, such as fluorescent lamps, compact fluorescent lamps, cold cathode fluorescent lamps (CCFL), high-intensity discharge lamps, and light-emitting diodes (LEDs). These newer technologies improve the ratio of visible light to heat generation. Some jurisdictions, such as the European Union, are in the process of phasing out the use of incandescent light bulbs in favor of more energy-efficient lighting.

History of the light bulb

In addressing the question of who invented the incandescent lamp, historians Robert Friedel and Paul Israel list 22 inventors of incandescent lamps prior to Joseph Swan and Thomas Edison. They conclude that Edison's version was able to outstrip the others because of a combination of three factors: an effective incandescent material, a higher vacuum than others were able to achieve (by use of the Sprengel pump) and a high resistance that made power distribution from a centralized source economically viable.

Another historian, Thomas Hughes, has attributed Edison's success to the fact that he developed an entire, integrated system of electric lighting.

The lamp was a small component in his system of electric lighting, and no more critical to its effective functioning than the Edison Jumbo generator, the Edison main and feeder, and the parallel-distribution system. Other inventors with generators and incandescent lamps, and with comparable ingenuity and excellence, have long been forgotten because their creators did not preside over their introduction in a system of lighting.

Historian Thomas P. Hughes

Early evolution of the light bulb

Early pre-commercial research

In 1802, Humphry Davy had what was then the most powerful electrical battery in the world at the Royal Institution of Great Britain. In that year, he created the first incandescent light by passing the current through a thin strip of platinum, chosen because the metal had an extremely high melting point. It was not bright enough nor did it last long enough to be practical, but it was the precedent behind the efforts of scores of experimenters over the next 75 years. In 1809, Davy also created the first arc lamp with two carbon charcoal rods connected to a 2000-cell battery; it was demonstrated to the Royal Institution in 1810.

Over the first three-quarters of the 19th century many experimenters worked with various combinations of platinum or iridium wires, carbon rods, and evacuated or semi-evacuated enclosures. Many of these devices were demonstrated and some were patented.

In 1835, James Bowman Lindsay demonstrated a constant electric light at a public meeting in Dundee, Scotland. He stated that he could "read a book at a distance of one and a half feet". However, having perfected the device to his own satisfaction, he turned to the problem of wireless telegraphy and did not develop the electric light any further. His claims are not well documented, although he is credited in Challoner etal. with being the inventor of the "Incandescent Light Bulb".

In 1840, British scientist Warren de la Rue enclosed a coiled platinum filament in a vacuum tube and passed an electric current through it. The design was based on the concept that the high melting point of platinum would allow it to operate at high temperatures and that the evacuated chamber would contain fewer gas molecules to react with the platinum, improving its longevity. Although an efficient design, the cost of the platinum made it impractical for commercial use.

In 1841, Frederick de Moleyns of England was granted the first patent for an incandescent lamp, with a design using platinum wires contained within a vacuum bulb.

In 1845, American John W. Starr acquired a patent for his incandescent light bulb involving the use of carbon filaments.

He died shortly after obtaining the patent, and his invention was never produced commercially. Little else is known about him.

In 1851, Jean Eugène Robert-Houdin publicly demonstrated incandescent light bulbs on his estate in Blois, France. His light bulbs are on permanent display in the museum of the Château de Blois.

In 1872, Russian Alexander Lodygin invented an incandescent light bulb and obtained a Russian patent in 1874. He used as a burner two carbon rods of diminished section in a glass receiver, hermetically sealed, and filled with nitrogen, electrically arranged so that the current could be passed to the second carbon when the first had been consumed. Later he lived in the USA, changed his name to Alexander de Lodyguine and applied and obtained patents for incandescent lamps having chromium, iridium, rhodium, ruthenium, osmium, molybdenum and tungsten filaments (US Patent No. 575,002 Illuminant for Incandescent Lamps, January 19, 1897), that were then demonstrated at the Exposition Universelle of 1900 in Paris.

Heinrich Göbel, who used the name Henry Goebel in the USA, made a claim in 1893 during litigation over Edison’s light bulb patent that, back in 1854, he had designed the first incandescent light bulb with a thin carbon-filament: a carbonized bamboo filament of high resistance, platinum lead-in wires in an all-glass envelope, and a high vacuum created by the process invented by Torricelli, and that in the following years he developed what many call the first practical incandescent light bulb. Judges of four courts raised doubts about the alleged Goebel anticipation, but there was never a decision in a final hearing due to the expiry date of Edison's patent. A research work published 2007 concluded that the story of the Goebel lamps in the 1850s is a legend.

In North America, parallel developments were taking place. On July 24, 1874, a Canadian patent was filed by a Toronto medical electrician named Henry Woodward and a colleague Mathew Evans. They built their lamps with different sizes and shapes of carbon rods held between electrodes in glass cylinders filled with nitrogen. Woodward and Evans attempted to commercialize their lamp, but were unsuccessful. They ended up selling their patent () to Thomas Edison in 1879.

Commercialization

Joseph Swan (1828–1914) was a British physicist and chemist. In 1850, he began working with carbonized paper filaments in an evacuated glass bulb. By 1860, he was able to demonstrate a working device but the lack of a good vacuum and an adequate supply of electricity resulted in a short lifetime for the bulb and an inefficient source of light. By the mid-1870s better pumps became available, and Swan returned to his experiments.

With the help of Charles Stearn, an expert on vacuum pumps, in 1878, Swan developed a method of processing that avoided the early bulb blackening. This received British Patent No 8 in 1880. On 18 December 1878, a lamp using a slender carbon rod was shown at a meeting of the Newcastle Chemical Society, and Swan gave a working demonstration at their meeting on 17 January 1879. It was also shown to 700 who attended a meeting of the Literary and Philosophical Society of Newcastle upon Tyne on 3 February 1879. These lamps used a carbon rod from an arc lamp rather than a slender filament. Thus they had low resistance and required very large conductors to supply the necessary current, so they were not commercially practical, although they did furnish a demonstration of the possibilities of incandescent lighting with relatively high vacuum, a carbon conductor, and platinum lead-in wires. Besides requiring too much current for a central station electric system to be practical, they had a very short lifetime. Swan turned his attention to producing a better carbon filament and the means of attaching its ends. He devised a method of treating cotton to produce 'parchmentised thread' and obtained British Patent 4933 in 1880. From this year he began installing light bulbs in homes and landmarks in England. His house was the first in the world to be lit by a lightbulb and so the first house in the world to be lit by hydroelectric power. In the early 1880s he had started his company. In 1881, the Savoy Theatre in the City of Westminster, London was lit by Swan incandescent lightbulbs, which was the first theatre, and the first public building in the world, to be lit entirely by electricity.

Thomas Edison began serious research into developing a practical incandescent lamp in 1878. Edison filed his first patent application for "Improvement In Electric Lights" on October 14, 1878. After many experiments with platinum and other metal filaments, Edison returned to a carbon filament. The first successful test was on October 22, 1879, and lasted 13.5 hours. Edison continued to improve this design and by November 4, 1879, filed for a U.S. patent for an electric lamp using "a carbon filament or strip coiled and connected ... to platina contact wires." Although the patent described several ways of creating the carbon filament including using "cotton and linen thread, wood splints, papers coiled in various ways," it was not until several months after the patent was granted that Edison and his team discovered that a carbonized bamboo filament could last over 1200 hours.

Hiram S. Maxim started a lightbulb company in 1878 to exploit his patents and those of William Sawyer. His United States Electric Lighting Company was the second company, after Edison, to sell practical incandescent electric lamps. They made their first commercial installation of incandescent lamps at the Mercantile Safe Deposit Company in New York City in the fall of 1880, about six months after the Edison incandescent lamps had been installed on the steamer Columbia. In October 1880, Maxim patented a method of coating carbon filaments with hydrocarbons to extend their life. Lewis Latimer, his employee at the time, developed an improved method of heat-treating them which reduced breakage and allowed them to be molded into novel shapes, such as the characteristic "M" shape of Maxim filaments. On January 17, 1882, Latimer received a patent for the "Process of Manufacturing Carbons," an improved method for the production of light bulb filaments, which was purchased by the United States Electric Light Company. Latimer patented other improvements such as a better way of attaching filaments to their wire supports.

In Britain, the Edison and Swan companies merged into the Edison and Swan United Electric Company (later known as Ediswan, that was ultimately incorporated into Thorn Lighting Ltd). Edison was initially against this combination, but after Swan sued him and won, Edison was eventually forced to cooperate, and the merger was made. Eventually, Edison acquired all of Swan's interest in the company. Swan sold his United States patent rights to the Brush Electric Company in June 1882.

In 1882, the first recorded set of miniature incandescent lamps for lighting a Christmas tree was installed. These did not become common in homes for many years.

The United States Patent Office gave a ruling October 8, 1883, that Edison's patents were based on the prior art of William Sawyer and were invalid. Litigation continued for a number of years. Eventually on October 6, 1889, a judge ruled that Edison's electric light improvement claim for "a filament of carbon of high resistance" was valid.

In the 1890s, the Austrian inventor Carl Auer von Welsbach worked on metal-filament mantles, first with platinum wire, and then osmium, and produced an operating version in 1898. In 1898, he patented the osmium lamp and started marketing it in 1902, the first commercial metal filament incandescent lamp.

In 1897, German physicist and chemist Walther Nernst developed the Nernst lamp, a form of incandescent lamp that used a ceramic globar and did not require enclosure in a vacuum or inert gas. Twice as efficient as carbon filament lamps, Nernst lamps were briefly popular until overtaken by lamps using metal filaments.

In 1901, American businessman Frank A. Poor purchased the Merritt Manufacturing Company, the predecessor to North American light bulb makers Hygrade and Osram Sylvania. Poor's firm in Middleton, Massachusetts, specialized in refilling burned-out light bulbs.

In 1903, Willis Whitnew invented a metal-coated carbon filament that would not blacken the inside of a light bulb.

On December 13, 1904, Hungarian Sándor Just and Croatian Franjo Hanaman were granted a Hungarian patent (No. 34541) for a tungsten filament lamp, that lasted longer and gave a brighter light than the carbon filament. Tungsten filament lamps were first marketed by the Hungarian company Tungsram in 1904, so this type is often called Tungsram-bulbs in many European countries. Their experiments have also shown that the luminosity of bulbs that were filled up with an inert gas was higher. The tungsten filament outlasted all other types.

In 1906, the General Electric Company patented a method of making filaments from sintered tungsten and in 1911, used ductile tungsten wire for incandescent light bulbs.

In 1913, Irving Langmuir found that filling a lamp with inert gas instead of a vacuum resulted in twice the luminous efficacy and reduction of bulb blackening. In 1924, Marvin Pipkin, an American chemist, patented a process for frosting the inside of lamp bulbs without weakening them, and in 1947, he patented a process for coating the inside of lamps with silica.

In 1916, Hygrade, predecessor to Osram Sylvania, discontinued its refilling service for burned-out light bulbs and produced 11,000 new light bulbs per day.

In 1930, Hungarian Imre Bródy filled lamps with krypton gas in lieu of argon. He used krypton and/or xenon filling of bulbs. Since the new gas was expensive, he developed a process with his colleagues to obtain krypton from air. Production of krypton filled lamps based on his invention started at Ajka in 1937, in a factory co-designed by Polányi and Hungarian-born physicist Egon Orowan.

By 1964, improvements in efficiency and production of incandescent lamps had reduced the cost of providing a given quantity of light by a factor of thirty, compared with the cost at introduction of Edison's lighting system

Consumption of incandescent light bulbs grew rapidly in the United States. In 1885, an estimated 300,000 general lighting service lamps were sold, all with carbon filaments. When tungsten filament were introduced, there were about 50 million lamp sockets in the United States. In 1914, 88.5 million lamps were used, (only 15% with carbon filaments), and by 1945, annual sales of lamps were 795 million (more than 5 lamps per person per year).

Cartels

Between 1924 and 1939, the international market for incandescent light bulbs was controlled by the Phoebus cartel, which dictated wholesale prices and whose members controlled most of the world market for lamps.

Efficiency and environmental impact

Approximately 90% of the power consumed by an incandescent light bulb is emitted as heat, rather than as visible light.

The effectiveness of an electric lighting source is determined by two factors: the relative visibility of electromagnetic radiation, and the rate at which the source converts electric power into electromagnetic radiation.

Luminous efficacy of a light source is a ratio of the visible light energy emitted (the luminous flux) to the total power input to the lamp. Visible light is measured in lumens, a unit which is defined in part by the differing sensitivity of the human eye to different wavelengths of light. Not all wavelengths of visible electromagnetic energy are equally effective at stimulating the human eye; the luminous efficacy of radiant energy is a measure of how well the distribution of energy matches the perception of the eye. The maximum efficacy possible is 683 lm/W for monochromatic green light at 555 nanometres wavelength, the peak sensitivity of the human eye. For white light, the maximum luminous efficacy is around 240 lumens per watt, but the exact value is not unique because the human eye can perceive many different mixtures of visible light as "white".

The chart below lists values of overall luminous efficacy and efficiency for several types of general service, 120-volt, 1000-hour lifespan incandescent bulb, and several idealized light sources. A similar chart in the article on luminous efficacy compares a broader array of light sources to one another.

!Type

|	Overall luminous efficiency	Overall luminous efficacy (lm/W)
40 W tungsten incandescent	1.9%	12.6
60 W tungsten incandescent	2.1%	14.5
100 W tungsten incandescent	2.6%	17.5
glass halogen	2.3%	16
quartz halogen	3.5%	24
high-temperature incandescent	5.1%	35
	7.0%	47.5
	14%	95
ideal monochromatic 555 nm (green) source	100%	683

Unfortunately, the spectrum emitted by a blackbody radiator does not match the sensitivity characteristics of the human eye. Tungsten filaments radiate mostly infrared radiation at temperatures where they remain solid (below 3683 kelvins / 3410 °C / 6,170 °F). Donald L. Klipstein explains it this way: "An ideal thermal radiator produces visible light most efficiently at temperatures around 6300 °C (6600 K or 11,500 °F). Even at this high temperature, a lot of the radiation is either infrared or ultraviolet, and the theoretical luminous efficiency is 95 lumens per watt." No known material can be used as a filament at this ideal temperature, which is hotter than the sun's surface. An upper limit for incandescent lamp luminous efficacy is around 52 lumens per watt, the theoretical value emitted by tungsten at its melting point.

For a given quantity of light, an incandescent light bulb produces more heat (and consumes more power) than a fluorescent lamp. In buildings where air conditioning is used, incandescent lamps' heat output always causes a detrimental increased load on the air conditioning system. The effect of the lamps' waste heat on a building's heating system depends on other factors:

In a building heated by electric resistance heaters, the load on the heating system is reduced by an equal amount; use of incandescent lamps therefore has no net effect on overall energy costs.

In a building heated by a heat pump (COP > 1), it is always more cost-effective to switch to a lighting system that produces less waste heat. Although the load on the heat pump will increase, overall energy costs will decline.

In a building heated by a combustion furnace or boiler, it is typically (but not always) more cost-effective to switch to a lighting system that produces less waste heat. The analysis depends on the relative costs of electricity and the fuel used by the heating system.

High-quality halogen incandescent lamps have higher efficacy, which will allow a 60-watt bulb to provide nearly as much light as a non-halogen 100-watt bulb. Also, a lower-wattage halogen lamp can be designed to produce the same amount of light as a 60-watt non-halogen lamp, but with much longer life.

Many light sources, such as the fluorescent lamp, high-intensity discharge lamps and LED lamps offer higher efficiency, and some have been designed to be retrofitted in existing fixtures. These devices produce light by luminescence, instead of heating a filament to incandescence. These mechanisms produce discrete spectral lines and so don't have the broad "tail" of wasted invisible infrared emissions produced by incandescent emitters. By careful selection of which electron energy level transitions are used, the spectrum emitted can be tuned to either mimic the appearance of incandescent sources or else produce different color temperatures of white for visible light.

Cost of lighting

The initial cost of an incandescent bulb is small compared to the cost of the energy it uses over its lifetime. A comparison of incandescent lamp operating cost with other light sources must consider the luminous efficacy produced by each lamp. The comparison must include illumination requirements, capital cost of the lamp, labor cost to replace lamps, various depreciation factors for light output as the lamp ages, effect of lamp operation on heating and air conditioning systems, and energy consumption as well.

Measures to ban its use

Due to the higher energy usage of incandescent light bulbs in comparison to more energy efficient alternatives, such as compact fluorescent lamps and LED lamps, many governments have introduced measures to ban their use, by setting minimum efficacy standards higher than can be achieved by general service lamps.

In the United States, federal law has scheduled the most common incandescent light bulbs to be phased out by 2014, to be replaced with more energy-efficient light bulbs. In Brazil, they have already been phased out between 2007 to 2010. Traditional incandescent light bulbs were phased out in Australia in November 2009.

However, there has been much resistance to these phasing out of incandescent lamps, owing to the low cost of incandescent bulbs, the instant availability of light, and possible ill health effects including the problems of mercury contamination with CFLs. Varying and unpredictable quality of current CFLs and LED lamps adds to the resistance.

Efforts to improve efficiency

Due to the measures noted above, there have been recent efforts to improve the efficiency of incandescents. In 2007, the consumer lighting division of General Electric announced a "high efficiency incandescent" (HEI) lamp project, which they claimed would ultimately be as much as four times more efficient than current incandescents, although their initial production goal was to be approximately two times more efficient. The HEI program was quietly terminated in 2008 due to slow progress.

U.S. Department of Energy research at Sandia National Laboratories initially indicated the potential for dramatically improved efficiency from a photonic lattice filament. However, later work indicated that initially promising results were in error.

Prompted by U.S. legislation mandating increased bulb efficiency by 2012, new "hybrid" incandescent bulbs have been introduced by Philips. The "Halogena Energy Saver" incandescent is 30 percent more efficient than traditional designs, using a special chamber to reflect formerly wasted heat back to the filament to provide additional lighting power.

Construction

Incandescent light bulbs consist of a glass enclosure (the envelope, or bulb) with a filament of tungsten wire inside the bulb, through which an electric current is passed. Contact wires and a base with two (or more) conductors provide electrical connections to the filament. Incandescent light bulbs usually contain a stem or glass mount anchored to the bulb's base that allows the electrical contacts to run through the envelope without gas/air leaks. Small wires embedded in the stem in turn support the filament and/or its lead wires. The bulb is filled with an inert gas such as argon to reduce evaporation and prevent oxidation of the filament.

An electric current heats the filament to typically ), well below tungsten's melting point of . Filament temperatures depend on the filament type, shape, size, and amount of current drawn. The heated filament emits light that approximates a continuous spectrum. The useful part of the emitted energy is visible light, but most energy is given off as heat in the near-infrared wavelengths.

Three-way light bulbs have two filaments and three conducting contacts in their bases. The filaments share a common ground, and can be lit separately or together. Common wattages include 30–70–100, 50–100–150, and 100–200–300, with the first two numbers referring to the individual filaments, and the third giving the combined wattage.

While most light bulbs have clear or frosted glass, other kinds are also produced, including the various colors used for Christmas tree lights and other decorative lighting. Neodymium-containing glass is sometimes used to provide a more natural-appearing light.

#Outline of Glass bulb

#Low pressure inert gas (argon, neon, nitrogen)

#Tungsten filament

#Contact wire (goes out of stem)

#Contact wire (goes into stem)

#Support wires

#Stem (glass mount)

#Contact wire (goes out of stem)

#Cap (sleeve)

#Insulation (vitrite)

#Electrical contact

Many arrangements of electrical contacts are used. Large lamps may have a screw base (one or more contacts at the tip, one at the shell) or a bayonet base (one or more contacts on the base, shell used as a contact or used only as a mechanical support). Some tubular lamps have an electrical contact at either end. Miniature lamps may have a wedge base and wire contacts, and some automotive and special purpose lamps have screw terminals for connection to wires. Contacts in the lamp socket allow the electric current to pass through the base to the filament. Power ratings for incandescent light bulbs range from about 0.1 watt to about 10,000 watts.

The glass bulb of a general service lamp can reach temperatures between . Lamps intended for high power operation or used for heating purposes will have envelopes made of hard glass or fused quartz.

Manufacturing

Early lamps were laboriously hand-assembled; however, after automatic machinery was developed the cost of lamps fell.

In manufacturing the glass bulb, a type of "ribbon machine" is used. A continuous ribbon of glass is passed along a conveyor belt, heated in a furnace, and then blown by precisely aligned air nozzles through holes in the conveyor belt into molds. Thus the glass bulbs are created. After the bulbs are blown, and cooled, they are cut off of the ribbon machine. A typical machine of this sort produces 50,000 bulbs per hour. The filament and its supports are assembled on a glass stem, which is fused to the bulb. The air is pumped out of the bulb, and the evacuation tube in the stem press is sealed by a flame. The bulb is then inserted into the lamp base, and the whole assembly tested.

Filament

The first successful light bulb filaments were made of carbon (from carbonized paper or bamboo). Early carbon filaments had a negative temperature coefficient of resistance -- as they got hotter, their electrical resistance decreased. This made the lamp sensitive to fluctuations in the power supply, since a small increase of voltage would cause the filament to heat up, reducing its resistance and causing it to draw even more power and heat even further. In the "flashing" process, carbon filaments were heated by current passing through them, while in an evacuated vessel containing hydrocarbon (gasoline) vapor. The carbon deposited by this treatment improved the uniformity and strength of filaments, and their efficiency. A metallized or graphitized filament was first heated in a high-temperature oven before flashing and lamp assembly; this transformed the carbon into graphite, which further strengthened and smoothed the filament, and as a byproduct had the advantage of changing the lamp to a positive temperature coefficient like a metallic conductor. This helped stabilize power consumption, temperature and light output against minor variations in supply voltage.

In 1902, the Siemens company developed a tantalum lamp filament. These lamps were more efficient than even graphitized carbon filaments and could operate at higher temperatures. Since the metal had a lower resistivity than carbon, the tantalum lamp filament was quite long and required multiple internal supports. The metal filament had the property of gradually shortening in use; the filaments were installed with large loops that tightened in use. This made lamps in use for several hundred hours quite fragile. Metal filaments had the property of breaking and re-welding, though this would usually decrease resistance and shorten the life of the filament. General Electric bought the rights to use tantalum filaments and produced them in the United States until 1913.

From 1898 to around 1905, osmium was also used as a lamp filament in Europe, but the metal was so expensive that used broken lamps could be returned for part credit. It could not be made for 110 V or 220 V so several lamps were wired in series for use on standard voltage circuits.

In 1906, the tungsten filament was introduced. Tungsten metal was initially not available in a form that allowed it to be drawn into fine wires. Filaments made from sintered tungsten powder were quite fragile. By 1910, a process was developed by William D. Coolidge at General Electric for production of a ductile form of tungsten. The process required pressing chemically produced tungsten powder into bars, then several steps of sintering, swaging, and then wire drawing. It was found that very pure tungsten formed filaments that sagged in use, and that a very small "doping" treatment with potassium, silicon, and aluminum oxides at the level of a few hundred parts per million greatly improved the life and durability of the tungsten filaments.

To improve the efficiency of the lamp, the filament usually consists of coils of coiled fine wire, also known as a 'coiled coil.' For a 60-watt 120-volt lamp, the uncoiled length of the tungsten filament is usually , and the filament diameter is . The advantage of the coiled coil is that evaporation of the tungsten filament is at the rate of a tungsten cylinder having a diameter equal to that of the coiled coil. The coiled-coil filament evaporates more slowly than a straight filament of the same surface area and light-emitting power. If the filament is then run hotter to bring back evaporation to the same rate, the resulting filament is a more efficient light source.

There are several different shapes of filament used in lamps, with differing characteristics. Manufacturers designate the types with codes such as C-6, CC-6, C-2V, CC-2V, C-8, CC-88, C-2F, CC-2F, C-Bar, C-Bar-6, C-8I, C-2R, CC-2R, and Axial.

Electrical filaments are also used in hot cathodes of fluorescent lamps and vacuum tubes as a source of electrons or in vacuum tubes to heat an electron-emitting electrode.

Reducing filament evaporation

One of the problems of the standard electric light bulb is evaporation of the filament. Small variations in resistivity along the filament cause "hot spots" to form at points of higher resistivity; a variation of diameter of only 1% will cause a 25% reduction in service life. The hot spots evaporate faster than the rest of the filament, increasing resistance at that point—a positive feedback that ends in the familiar tiny gap in an otherwise healthy-looking filament. Irving Langmuir found that an inert gas, instead of vacuum, would retard evaporation. General service incandescent light bulbs over about 25 watts in rating are now filled with a mixture of mostly argon and some nitrogen, or sometimes krypton. Xenon gas, much more expensive, is used occasionally in small bulbs, such as those for flashlights. Since a filament breaking in a gas-filled bulb can form an electric arc, which may spread between the terminals and draw very heavy current, intentionally thin lead-in wires or more elaborate protection devices are therefore often used as fuses built into the light bulb.

More nitrogen is used in higher-voltage lamps to reduce the possibility of arcing.

During ordinary operation, the tungsten of the filament evaporates; hotter, more-efficient filaments evaporate faster. Because of this, the lifetime of a filament lamp is a trade-off between efficiency and longevity. The trade-off is typically set to provide a lifetime of several hundred to 2,000 hours for lamps used for general illumination. Theatrical, photographic, and projection lamps may have a useful life of only a few hours, trading life expectancy for high output in a compact form. Long-life general service lamps have lower efficiency but are used where the cost of changing the lamp is high compared to the value of energy used.

Filament notching describes another phenomenon that limits the life of lamps. Lamps operated on direct current develop random stair-step irregularities on the filament surface, reducing the cross section and further increasing heat and evaporation of tungsten at these points. In small lamps operated on direct current, lifespan may be cut in half compared to AC operation. Different alloys of tungsten and rhenium can be used to counteract the effect.

If a light bulb envelope leaks, the hot tungsten filament reacts with air, yielding an aerosol of brown tungsten nitride, brown tungsten dioxide, violet-blue tungsten pentoxide, and yellow tungsten trioxide that then deposits on the nearby surfaces or the bulb interior.

Bulb blackening

In a conventional lamp, the evaporated tungsten eventually condenses on the inner surface of the glass envelope, darkening it. For bulbs that contain a vacuum, the darkening is uniform across the entire surface of the envelope. When a filling of inert gas is used, the evaporated tungsten is carried in the thermal convection currents of the gas, depositing preferentially on the uppermost part of the envelope and blackening just that portion of the envelope. An incandescent lamp that gives 93% or less of its initial light output at 75% of its rated life is regarded as unsatisfactory, when tested according to IEC Publication 60064. Light loss is due to filament evaporation and bulb blackening. Study of the problem of bulb blackening led to the discovery of the Edison effect, thermionic emission and invention of the vacuum tube.

A very small amount of water vapor inside a light bulb can significantly affect lamp darkening. Water vapor dissociates into hydrogen and oxygen at the hot filament. The oxygen attacks the tungsten metal, and the resulting tungsten oxide particles travel to cooler parts of the lamp. Hydrogen from water vapor reduces the oxide, reforming water vapor and continuing this water cycle. The equivalent of a drop of water distributed over 500,000 lamps will significantly increase darkening. Small amounts of substances such as zirconium are placed within the lamp as a getter to react with any oxygen that may bake out of the lamp components during operation.

Some old, high-powered lamps used in theater, projection, searchlight, and lighthouse service with heavy, sturdy filaments contained loose tungsten powder within the envelope. From time to time, the operator would remove the bulb and shake it, allowing the tungsten powder to scrub off most of the tungsten that had condensed on the interior of the envelope, removing the blackening and brightening the lamp again.

Halogen lamps

The halogen lamp reduces uneven evaporation of the filament and darkening of the envelope by filling the lamp with a halogen gas at low pressure, rather than an inert gas. The halogen cycle increases the lifetime of the bulb and prevents its darkening by redepositing tungsten from the inside of the bulb back onto the filament. The halogen lamp can operate its filament at a higher temperature than a standard gas filled lamp of similar power without loss of operating life.

Incandescent arc lamps

A variation of the incandescent lamp did not use a hot wire filament, but instead used an arc struck on a spherical bead electrode to produce heat. The electrode then became incandescent, with the arc contributing little to the light produced. Such lamps were used for projection or illumination for scientific instruments such as microscopes. These arc lamps ran on relatively low voltages and incorporated tungsten filaments to start ionization within the envelope. They provided the intense concentrated light of an arc lamp but were easier to operate. Developed around 1915, these lamps were displaced by mercury and xenon arc lamps.

Electrical characteristics

Power

Incandescent lamps are nearly pure resistive loads with a power factor of 1. This means the actual power consumed (in watts) and the apparent power (in volt-amperes) are equal. Incandescent light bulbs are usually marketed according to the electrical power consumed. This is measured in watts and depends mainly on the resistance of the filament, which in turn depends mainly on the filament's length, thickness, and material. For two bulbs of the same voltage, type, color, and clarity, the higher-powered bulb gives more light.

The table shows the approximate typical output, in lumens, of standard incandescent light bulbs at various powers. Note that the lumen values for "soft white" bulbs will generally be slightly lower than for standard bulbs at the same power, while clear bulbs will usually emit a slightly brighter light than correspondingly powered standard bulbs.

Current and resistance

The actual resistance of the filament is temperature-dependent. The cold resistance of tungsten-filament lamps is about 1/15 the hot-filament resistance when the lamp is operating. For example, a 100-watt, 120-volt lamp has a resistance of 144 ohms when lit, but the cold resistance is much lower (about 9.5 ohms). Since incandescent lamps are resistive loads, simple phase-control triac dimmers can be used to control brightness. Electrical contacts may carry a "T" rating symbol indicating that they are designed to control circuits with the high inrush current characteristic of tungsten lamps. For a 100-watt, 120-volt general-service lamp, the current stabilizes in about 0.10 seconds, and the lamp reaches 90% of its full brightness after about 0.13 seconds.

align="right">

+ Comparison of efficacy by power (120 volt lamps)	Watt>W)	lumen (unit)>lm)
5	25	5
15	110	7.3
25	200	8.0
35	350	10.0
40	500	12.5
50	700	14.0
55	800	14.5
60	850	14.2
65	1,000	15.4
70	1,100	15.7
75	1,200	16.0
90	1,450	16.1
95	1,600	16.8
100	1,700	17.0
135	2,350	17.4
150	2,850	19.0
200	3,900	19.5
300	6,200	20.7

Physical characteristics

Bulb shapes

Incandescent light bulbs come in a range of shapes and sizes. The names of the shapes may be slightly different in some regions. Many of these shapes have a designation consisting of one or more letters followed by one or more numbers, e.g. A55 or PAR38. The letters represent the shape of the bulb. The numbers represent the maximum diameter, either in of an inch, or in millimetres, depending on the shape and the region. For example, 63 mm reflectors are designated R63, but in the U.S. they are known as R20 (2.5 in). However, in both regions, a PAR38 reflector is known as PAR38. In Australia an R80 is 1 in in diameter.

Common shapes:

;General Service :Light emitted in (nearly) all directions. Available either clear or frosted. :Types: General (A), Mushroom

;High Wattage General Service :Lamps greater than 200 watts. :Types: Pear-shaped (PS)

;Decorative :lamps used in chandeliers, etc. :Types: candle (B), twisted candle, bent-tip candle (CA & BA), flame (F), fancy round (P), globe (G)

;Reflector (R): Reflective coating inside the bulb directs light forward. Flood types (FL) spread light. Spot types (SP) concentrate the light. Reflector (R) bulbs put approximately double the amount of light (foot-candles) on the front central area as General Service (A) of same wattage. :Types: Standard reflector (R), elliptical reflector (ER), crown-silvered

;Parabolic aluminized reflector (PAR) : Parabolic aluminized reflector (PAR) bulbs control light more precisely. They produce about four times the concentrated light intensity of general service (A), and are used in recessed and track lighting. Weatherproof casings are available for outdoor spot and flood fixtures. :120 V sizes: PAR 16, 20, 30, 38, 56 and 64 :230 V sizes: Par 38, 56 and 64 :Available in numerous spot and flood beam spreads. Like all light bulbs, the number represents the diameter of the bulb in of an inch. Therefore, a PAR 16 is 2 in in diameter, a PAR 20 is 2.5 in in diameter, PAR 30 is 3.75 in and a PAR 38 is 4.75 in in diameter.

;Multifaceted reflector (MR)

;HIR: "HIR" is a GE designation for a lamp with an infrared reflective coating. Since less heat escapes, the filament burns hotter and more efficiently. The Osram designation for a similar coating is "IRC".

Lamp bases

Very small lamps may have the filament support wires extended through the base of the lamp, and can be directly soldered to a printed circuit board for connections. Some reflector-type lamps include screw terminals for connection of wires. Most lamps have metal bases that fit in a socket to support the lamp and conduct current to the filament wires. In the late 19th century, manufacturers introduced a multitude of incompatible lamp bases. General Electric introduced standard base sizes for tungsten incandescent lamps under the Mazda trademark in 1909. This standard was soon adopted across the United States, and the Mazda name was used by many manufacturers under license through 1945. Today most incandescent lamps for general lighting service use an Edison screw in candelabra, intermediate, or standard or mogul sizes, or double contact bayonet base. Bayonet base lamps are frequently used in automotive lamps to resist loosening due to vibration. A bipin base is often used for halogen or reflector lamps.

Lamp bases may be secured to the bulb with a cement, or by mechanical crimping to indentations molded into the glass bulb. Miniature lamps used for some automotive lamps or decorative lamps have wedge bases that have a partial plastic or even completely glass base. In this case, the wires wrap around to the outside of the bulb, where they press against the contacts in the socket. Miniature Christmas bulbs use a plastic wedge base as well.

Lamps intended for use in optical systems (such as film projectors, microscope illuminators, or stage lighting instruments have bases with alignment features so that the filament is positioned accurately within the optical system. A screw-base lamp may have a random orientation of the filament when the lamp is installed in the socket.

Light output and lifetime

Incandescent lamps are very sensitive to changes in the supply voltage. These characteristics are of great practical and economic importance.

For a supply voltage V near the rated voltage of the lamp:

Light output is approximately proportional to V ^3.4

Power consumption is approximately proportional to V ^1.6

Lifetime is approximately proportional to V ⁻¹⁶

Color temperature is approximately proportional to V ^0.42 This means that a 5% reduction in operating voltage will more than double the life of the bulb, at the expense of reducing its light output by about 20%. This may be a very acceptable trade off for a light bulb that is in a difficult-to-access location (for example, traffic lights or fixtures hung from high ceilings). Long-life bulbs take advantage of this trade-off. Since the value of the electric power they consume is much more than the value of the lamp, general service lamps emphasize efficiency over long operating life. The objective is to minimize the cost of light, not the cost of lamps.

The relationships above are valid for only a few percent change of voltage around rated conditions, but they do indicate that a lamp operated at much lower than rated voltage could last for hundreds of times longer than at rated conditions, albeit with greatly reduced light output. The Centennial Light is a light bulb that is accepted by the Guinness Book of World Records as having been burning almost continuously at a fire station in Livermore, California, since 1901. However, the bulb is powered by only four watts. A similar story can be told of a 40-watt bulb in Texas that has been illuminated since September 21, 1908. It once resided in an opera house where notable celebrities stopped to take in its glow, but is now in an area museum.

In flood lamps used for photographic lighting, the tradeoff is made in the other direction. Compared to general-service bulbs, for the same power, these bulbs produce far more light, and (more importantly) light at a higher color temperature, at the expense of greatly reduced life (which may be as short as two hours for a type P1 lamp). The upper temperature limit for the filament is the melting point of the metal. Tungsten is the metal with the highest melting point, . A 50-hour-life projection bulb, for instance, is designed to operate only below that melting point. Such a lamp may achieve up to 22 lumens per watt, compared with 17.5 for a 750-hour general service lamp.

Lamps designed for different voltages have different luminous efficacy. For example, a 100-watt, 120-volt lamp will produce about 17.1 lumens per watt. A lamp with the same rated lifetime but designed for 230 V would produce only around 12.8 lumens per watt, and a similar lamp designed for 30 volts (train lighting) would produce as much as 19.8 lumens per watt. Lower voltage lamps have a thicker filament, for the same power rating. They can run hotter for the same lifetime before the filament evaporates.

The wires used to support the filament make it mechanically stronger, but remove heat, creating another tradeoff between efficiency and long life. Many general-service 120-volt lamps use no additional support wires, but lamps designed for "rough service" or "vibration service" may have as many as five. Low-voltage lamps have filaments made of heavier wire and do not require additional support wires.

Very low voltages are inefficient since the lead wires would conduct too much heat away from the filament, so the practical lower limit for incandescent lamps is 1.5 volts. Very long filaments for high voltages are fragile, and lamp bases become more difficult to insulate, so lamps for illumination are not made with rated voltages over 300 volts. Some infrared heating elements are made for higher voltages, but these use tubular bulbs with widely separated terminals.

Health issues

Although some sources claim fluorescent lighting causes more health problems than incandescent lighting (see Light sensitivity and Over-illumination for discussion), more research needs to be done in this field. According to the European Commission Scientific Committee on Emerging and Newly Identified Health Risks (SCENIHR) in 2008, the only property of compact fluorescent lamps that could pose an added health risk is the ultraviolet and blue light emitted by such devices. The worst that can happen is that this radiation could aggravate symptoms in people who already suffer rare skin conditions that make them exceptionally sensitive to light. They also stated that more research is needed to establish whether compact fluorescent lamps constitute any higher risk than incandescent lamps.

Radio interference

Incandescent bulbs do not produce significant radio frequency interference, a concern with many other light sources, such as most LED and fluorescent lamps.

See also

References

External links

Museum of Electric Lamp Technology

Howstuffworks - "How Light Bulbs Work"

Light Source Spectra 60 W-100 W Incandescent light bulb spectra

Halogen Light Bulbs – Base Identification

Light Bulbs - Lamps and Tubes - Lamp Bases Explained

The Perfection of the Electric Light Bulb – background and experiment

Incandescent Light Bulb's Bulb and Base Types Explained

Examples of how color temperature of light bulbs affect our surroundings

An brief article explaing the light bulb - "The Composition of the Light Bulb"

The history of the light bulb

BanTheBulb.Org energy efficiency campaign

Great light bulbs gallery

Category:Lamps Category:Light sources Category:Discovery and invention controversies Category:English inventions Category:Thomas Edison

bs:Sijalica bg:Лампа с нажежаема жичка ca:Bombeta elèctrica cs:Žárovka da:Glødelampe de:Glühlampe et:Hõõglamp el:Λαμπτήρας πυράκτωσης es:Lámpara incandescente eo:Ampolo eu:Bonbilla fa:لامپ رشته‌ای fr:Lampe à incandescence classique fy:Gloeilampe gd:Bolgan (innleachd) gl:Lámpada incandescente gan:燈泡 ko:백열등 hi:उद्दीप्त दीपक hr:Električna žarulja id:Lampu pijar is:Ljósapera it:Lampadina he:נורה חשמלית ka:ნათურა sw:Balbu la:Globulus electricus lv:Kvēlspuldze lt:Kaitrinė lemputė hu:Izzólámpa ml:വൈദ്യുതവിളക്ക് ms:Mentol lampu nl:Gloeilamp ne:बिजुली बत्ती ja:電球 no:Glødelampe nn:Glødelampe pl:Żarówka pt:Lâmpada incandescente ksh:Bier (en de Lamp) ro:Bec incandescent qu:Sansa k'anchana ru:Лампа накаливания sq:Poçi simple:Lightbulb sk:Žiarovka sl:Žarnica szl:Byrna sr:Сијалица fi:Hehkulamppu sv:Glödlampa ta:வெள்ளொளிர்வு விளக்கு tr:Ampul uk:Лампа розжарювання ur:برقی قمقمہ vi:Đèn sợi đốt zh-yue:電燈膽 bat-smg:Alektrėnė lėmpele zh:電燈泡