Temperature is a physical property of matter that quantitatively expresses the common notions of hot and cold. Objects of low temperature are cold, while various degrees of higher temperatures are referred to as warm or hot.
Quantitatively, temperature is measured with thermometers, which may be calibrated to a variety of temperature scales. alpha helix. The amplitude of the vibrations increases with temperature.]]
Temperature plays an important role in all fields of natural science, including physics, geology, chemistry, atmospheric sciences and biology.
In a microscopic explanation, the temperature of a body varies with the speed of the fundamental particles that it contains, raised to the second power. Therefore, temperature is tied directly to the mean kinetic energy of particles moving relative to the center of mass coordinates for that object.
Many physical properties of materials including the phase (solid, liquid, gaseous or plasma), density, solubility, vapor pressure, and electrical conductivity depend on the temperature. Temperature also plays an important role in determining the rate and extent to which chemical reactions occur. This is one reason why the human body has several elaborate mechanisms for maintaining the temperature at 310 K, since temperatures only a few degrees higher can result in harmful reactions with serious consequences. Temperature also controls the thermal radiation emitted from a surface. One application of this effect is the incandescent light bulb, in which a tungsten filament is electrically heated to a temperature at which significant quantities of visible light are emitted.
For practical purposes of scientific temperature measurement, the International System of Units (SI) defines a scale and unit for the thermodynamic temperature by using the easily reproducible temperature of the triple point of water as a second reference point. For historical reasons, the triple point is fixed at 273.16 units of the measurement increment, which has been named the kelvin in honor of the Scottish physicist who first defined the scale. The unit symbol of the kelvin is K.
Absolute zero is defined as a temperature of precisely 0 kelvins, which is equal to −273.15 °C or −459.68 °F.
On the molecular level, temperature is the result of the motion of the particles that constitute the material. Moving particles carry kinetic energy. Temperature increases as this motion and the kinetic energy increase. The motion may be the translational motion of particles, or the energy of the particle due to molecular vibration or the excitation of an electron energy level. Although very specialized laboratory equipment is required to directly detect the translational thermal motions, thermal collisions by atoms or molecules with small particles suspended in a fluid produces Brownian motion that can be seen with an ordinary microscope. The thermal motions of atoms are very fast and temperatures close to absolute zero are required to directly observe them. For instance, when scientists at the NIST achieved a record-setting low temperature of 700 nK (1 nK = 10−9 K) in 1994, they used laser equipment to create an optical lattice to adiabatically cool caesium atoms. They then turned off the entrapment lasers and directly measured atom velocities of per second in order to calculate their temperature.
Molecules, such as oxygen (O2), have more degrees of freedom than single spherical atoms: they undergo rotational and vibrational motions as well as translations. Heating results in an increase in temperature due to an increase in the average translational energy of the molecules. Heating will also cause, through equipartitioning, the energy associated with vibrational and rotational modes to increase. Thus a diatomic gas will require a higher energy input to increase its temperature by a certain amount, i.e. it will have a higher heat capacity than a monatomic gas.
The process of cooling involves removing thermal energy from a system. When no more energy can be removed, the system is at absolute zero, which cannot be achieved experimentally. Absolute zero is the null point of the thermodynamic temperature scale, also called absolute temperature. If it were possible to cool a system to absolute zero, all motion of the particles comprising matter would cease and they would be at complete rest in this classical sense. Microscopically in the description of quantum mechanics, however, matter still has zero-point energy even at absolute zero, because of the uncertainty principle.
When two systems are at the same temperature, no net heat transfer occurs spontanteously, by conduction or radiation, between them. When a temperature difference does exist, and there is a thermally conductive or radiative connection between them, heat transfers spontaneously from the warmer system to the colder system, until they are at mutual thermal equilibrium. This transfer occurs by heat conduction or by thermal radiation.
Experimental physicists, for example Galileo and Newton, found that there are indefinitely many empirical temperature scales.
Except for a system undergoing a first-order phase change such as the melting of ice, as a closed system receives heat, without change in its volume and without change in external force fields acting on it, its temperature rises. For a system undergoing such a phase change so slowly that departure from thermodynamic equilibrium can be neglected, its temperature remains constant as the system is supplied with latent heat. Conversely, a loss of heat from a closed system, without phase change, without change of volume, and without change in external force fields acting on it, decreases its temperature.
Temperature is measured with thermometers that may be calibrated to a variety of temperature scales. In most of the world (except for Belize, Myanmar, Liberia and the United States), the Celsius scale is used for most temperature measuring purposes. Most scientist measures temperature using the Celsius scale and the thermodynamic temperature using the Kelvin scale, which is the Celsius scale offset so that its null point is = , or absolute zero. Many engineering fields in the U.S., notably high-tech and US federal specifications (civil and military), also use the Kelvin and Celsius scales. Other engineering fields in the U.S. also rely upon the Rankine scale (a shifted Fahrenheit scale) when working in thermodynamic-related disciplines such as combustion.
For everyday applications, it is often convenient to use the Celsius scale, in which corresponds very closely to the freezing point of water and is its boiling point at sea level. Because liquid droplets commonly exist in clouds at sub-zero temperatures, is better defined as the melting point of ice. In this scale a temperature difference of 1 degree Celsius is the same as a increment, but the scale is offset by the temperature at which ice melts (273.15 K).
By international agreement the Kelvin and Celsius scales are defined by two fixing points: absolute zero and the triple point of Vienna Standard Mean Ocean Water, which is water specially prepared with a specified blend of hydrogen and oxygen isotopes. Absolute zero is defined as precisely and . It is the temperature at which all classical translational motion of the particles comprising matter ceases and they are at complete rest in the classical model. Quantum-mechanically, however, zero-point motion remains and has an associated energy, the zero-point energy. Matter is in its ground state, and contains no thermal energy. The triple point of water is defined as and . This definition serves the following purposes: it fixes the magnitude of the kelvin as being precisely 1 part in 273.16 parts of the difference between absolute zero and the triple point of water; it establishes that one kelvin has precisely the same magnitude as one degree on the Celsius scale; and it establishes the difference between the null points of these scales as being ( = and = ).
In the United States, the Fahrenheit scale is widely used. On this scale the freezing point of water corresponds to 32 °F and the boiling point to 212 °F. The Rankine scale, still used in fields of chemical engineering in the U.S., is an absolute scale based on the Fahrenheit increment.
The microscopic description in statistical mechanics is based on a model that decomposes a system into its fundamental particles of matter or into a set of classical or quantum-mechanical oscillators and considers the system as a statistical ensemble of microstates. As a collection of classical material particles, temperature is a measure of the mean energy of motion, called kinetic energy, of the particles, whether in solids, liquids, gases, or plasmas. Kinetic energy, a concept of classical mechanics, is one half the product of mass and the square of a particle's velocity. In this mechanical interpretation of thermal motion, the kinetic energies of material particles may reside in the velocity of the particles of their translational or vibrational motion or in the inertia of their rotational modes. In monoatomic perfect gases and, approximately, in most gases, temperature is a measure of the mean particle kinetic energy. It also determines the probability distribution function of the energy. In condensed matter, and particularly in solids, this purely mechanical description is often less useful and the oscillator model provides a better description to account for quantum mechanical phenomena. Temperature determines the statistical occupation of the microstates of the ensemble. The microscopic definition of temperature is only meaningful in the thermodynamic limit, meaning for large ensembles of states or particles, to fulfill the requirements of the statistical model.
In the context of thermodynamics, the kinetic energy is also referred to as thermal energy. The thermal energy may be partitioned into independent components attributed to the degrees of freedom of the particles or to the modes of oscillators in a thermodynamic system. In general, the number of these degrees of freedom that are available for the equipartitioning of energy depend on the temperature, i.e. the energy region of the interactions under consideration. For solids, the thermal energy is associated primarily with the vibrations of its atoms or molecules about their equilibrium position. In an ideal monatomic gas, the kinetic energy is found exclusively in the purely translational motions of the particles. In other systems, vibrational and rotational motions also contribute degrees of freedom.
The second law of thermodynamics states that any two given systems when interacting with each other will later reach the same average energy per particle and hence the same temperature.
In a mixture of particles of various masses, the heaviest particles will move slower than lighter particles, but have the same average kinetic energy. A neon atom moves slower relative to a hydrogen molecule of the same kinetic energy; a pollen particle suspended in water moves in a slow Brownian motion among fast moving water molecules.
The usual textbook statement of the zeroth law of thermodynamics is that if two systems are each in thermal equilibrium with a third system, then they are also in thermal equilibrium with each other. This statement is taken to justify a statement that all three systems have the same temperature, but, by itself, it does not justify the idea of temperature as a numerical scale for a concept of hotness which exists on a one-dimensional manifold with a sense of greater hotness. Sometimes the zeroth law is stated to provide the latter justification. For suitable systems, an empirical temperature scale may be defined by the variation of one of the other state variables, such as pressure, when all other coordinates are fixed. The second law of thermodynamics is used to define an absolute thermodynamic temperature scale for systems in thermal equilibrium.
A temperature scale is based on the properties of some reference system to which other thermometers may be calibrated. One such reference system is a fixed quantity of gas. The ideal gas law indicates that the product of the pressure (p) and volume (V) of a gas is directly proportional to the thermodynamic temperature: : where T is temperature, n is the number of moles of gas and R = is the gas constant. Reformulating the pressure-volume term as the sum of classical mechanical particle energies in terms of particle mass, m, and root-mean-square particle speed v, the ideal gas law directly provides the relationship between kinetic energy and temperature: :
Thus, one can define a scale for temperature based on the corresponding pressure and volume of the gas: the temperature in kelvins is the pressure in pascals of one mole of gas in a container of one cubic metre, divided by the gas constant. In practice, such a gas thermometer is not very convenient, but other thermometers can be calibrated to this scale.
The pressure, volume, and the number of moles of a substance are all inherently greater than or equal to zero, suggesting that temperature must also be greater than or equal to zero. As a practical matter it is not possible to use a gas thermometer to measure absolute zero temperature since the gasses tend to condense into a liquid long before the temperature reaches zero. It is possible, however, to extrapolate to absolute zero by using the ideal gas law.
For example, in a series of coin tosses, a perfectly ordered system would be one in which either every toss comes up heads or every toss comes up tails. This means that for a perfectly ordered set of coin tosses, there is only one set of toss outcomes possible: the set in which 100% of tosses come up the same. On the other hand, there are multiple combinations that can result in disordered or mixed systems, where some fraction are heads and the rest tails. A disordered system can be 90% heads and 10% tails, or it could be 98% heads and 2% tails, et cetera. As the number of coin tosses increases, the number of possible combinations corresponding to imperfectly ordered systems increases. For a very large number of coin tosses, the combinations to ~50% heads and ~50% tails dominates and obtaining an outcome significantly different from 50/50 becomes extremely unlikely. Thus the system naturally progresses to a state of maximum disorder or entropy.
It has been previously stated that temperature controls the flow of heat between two systems and it was just shown that the universe tends to progress so as to maximize entropy, which is expected of any natural system. Thus, it is expected that there is some relationship between temperature and entropy. To find this relationship, the relationship between heat, work and temperature is first considered. A heat engine is a device for converting thermal energy into mechanical energy, resulting in the performance of work, and analysis of the Carnot heat engine provides the necessary relationships. The work from a heat engine corresponds to the difference between the heat put into the system at the high temperature, qH and the heat ejected at the low temperature, qC. The efficiency is the work divided by the heat put into the system or: : (2)
where wcy is the work done per cycle. The efficiency depends only on qC/qH. Because qC and qH correspond to heat transfer at the temperatures TC and TH, respectively, qC/qH should be some function of these temperatures: : (3)
Carnot's theorem states that all reversible engines operating between the same heat reservoirs are equally efficient. Thus, a heat engine operating between T1 and T3 must have the same efficiency as one consisting of two cycles, one between T1 and T2, and the second between T2 and T3. This can only be the case if: :
which implies: :
Since the first function is independent of T2, this temperature must cancel on the right side, meaning f(T1,T3) is of the form g(T1)/g(T3) (i.e. f(T1,T3) = f(T1,T2)f(T2,T3) = g(T1)/g(T2)· g(T2)/g(T3) = g(T1)/g(T3)), where g is a function of a single temperature. A temperature scale can now be chosen with the property that:
: (4)
Substituting Equation 4 back into Equation 2 gives a relationship for the efficiency in terms of temperature: : (5)
Notice that for TC = 0 K the efficiency is 100% and that efficiency becomes greater than 100% below 0 K. Since an efficiency greater than 100% violates the first law of thermodynamics, this implies that 0 K is the minimum possible temperature. In fact the lowest temperature ever obtained in a macroscopic system was 20 nK, which was achieved in 1995 at NIST. Subtracting the right hand side of Equation 5 from the middle portion and rearranging gives: :
where the negative sign indicates heat ejected from the system. This relationship suggests the existence of a state function, S, defined by: : (6)
where the subscript indicates a reversible process. The change of this state function around any cycle is zero, as is necessary for any state function. This function corresponds to the entropy of the system, which was described previously. Rearranging Equation 6 gives a new definition for temperature in terms of entropy and heat: : (7)
For a system, where entropy S(E) is a function of its energy E, the temperature T is given by: : (8),
i.e. the reciprocal of the temperature is the rate of increase of entropy with respect to energy.
In the quantum mechanical description of electron and nuclear spin systems that have a limited number of possible states, and therefore a discrete upper limit of energy they can attain, it is possible to obtain a negative temperature, which is numerically indeed less than absolute zero. However, this is not the macroscopic temperature of the material, but instead the temperature of only very specific degrees of freedom, that are isolated from others and do not exchange energy by virtue of the equipartition theorem.
A negative temperature is experimentally achieved with suitable radio frequency techniques that cause a population inversion of spin states from the ground state. As the energy in the system increases upon population of the upper states, the entropy increases as well, as the system becomes less ordered, but attains a maximum value when the spins are evenly distributed among ground and excited states, after which it begins to decrease, once again achieving a state of higher order as the upper states begin to fill exclusively. At the point of maximum entropy, the temperature function shows the behavior of a singularity, because the slope of the entropy function decreases to zero at first and then turns negative. Since temperature is the inverse of the derivative of the entropy, the temperature formally goes to infinity at this point, and switches to negative infinity as the slope turns negative. At energies higher than this point, the spin degree of freedom therefore exhibits formally a negative thermodynamic temperature. As the energy increases further by continued population of the excited state, the negative temperature approaches zero asymptotically. As the energy of the system increases in the population inversion, a system with a negative temperature is not colder than absolute zero, but rather it has a higher energy than at positive temperature, and may be said to be in fact hotter at negative temperatures. When brought into contact with a system at a positive temperature, energy will be transferred from the negative temperature regime to the positive temperature region.
Temperature | ! rowspan=2 | ||
Kelvin#Usage conventions>Kelvin | ! Degrees Celsius | ||
0 K | −273.15 °C | ||
450 pK | °C | ||
0.001 K | −273.149 °C | ||
style="background:#d9d9d3" | 273.16 K | 0.01 °C | |
373.1339 K | 99.9839 °C | 7,766.03 nm(mid wavelength I.R.) | |
style="background:#d9d9d3" | 2500 K | ≈2,200 °C | 1,160 nm(near infrared) |
style="background:#d9d9d3" | 5,778 K | 5,505 °C | |
style="background:#d9d9d3" | 28 kK | 28,000 °C | 100 nm(far ultraviolet light) |
style="background:#d9d9d3" | 16 MK | 16 million °C | 0.18 nm (X-rays) |
style="background:#d9d9d3" | 350 MK | 350 million °C | 8.3×10−3 nm(gamma rays) |
2 GK | 2 billion °C | 1.4×10−3 nm(gamma rays) | |
style="background:#d9d9d3" | 3 GK | 3 billion °C | 1×10−3 nm(gamma rays) |
style="background:#d9d9d3" | 350 GK | 350 billion °C | 8×10−6 nm(gamma rays) |
style="background:#d9d9d3" | 1 TK | 1 trillion °C | 3×10−6 nm(gamma rays) |
style="background:#d9d9d3" | 10 TK | 10 trillion °C | 3×10−7 nm(gamma rays) |
style="background:#d9d9d3" | 1.417×1032 °C |
Category:Fundamental physics concepts Category:Physical quantities Category:Thermodynamics Category:Heat transfer Category:State functions
af:Temperatuur an:Temperatura ar:درجة حرارة ast:Temperatura az:Temperatur bn:তাপমাত্রা be:Тэмпература be-x-old:Тэмпэратура bo:དྲོད་ཚད། bs:Temperatura br:Gwrezverk bg:Температура ca:Temperatura ceb:Temperatura cs:Teplota cy:Tymheredd da:Temperatur de:Temperatur et:Temperatuur el:Θερμοκρασία es:Temperatura eo:Temperaturo eu:Tenperatura fa:دما fr:Température ga:Teocht gl:Temperatura ko:온도 hi:तापमान hr:Temperatura io:Temperaturo id:Suhu is:Hiti it:Temperatura he:טמפרטורה kn:ತಾಪಮಾನ ka:ტემპერატურა kk:Температура sw:Halijoto ht:Tanperati ku:Têhn (fîzîk) la:Temperatura thermodynamica lv:Temperatūra lb:Temperatur lt:Temperatūra hu:Hőmérséklet mk:Температура ml:ഊഷ്മാവ് mr:तापमान ms:Suhu nl:Temperatuur nds-nl:Temperetuur ja:温度 no:Temperatur nn:Temperatur oc:Temperatura uz:Harorat pms:Temperadura nds:Temperatur pl:Temperatura pnb:ٹمپریچر pt:Temperatura ro:Temperatură qu:Q'uñi kay ru:Температура sq:Temperatura scn:Timpiratura (statu tèrmicu) si:උෂ්ණත්වය simple:Temperature sk:Teplota sl:Temperatura sr:Температура sh:Temperatura su:Suhu fi:Lämpötila sv:Temperatur tl:Temperatura ta:வெப்பநிலை te:ఉష్ణోగ్రత th:อุณหภูมิ tr:Sıcaklık uk:Температура ur:درجہ حرارت vec:Tenperadura vi:Nhiệt độ fiu-vro:Lämmidüs war:Temperatura wuu:温度 yi:טעמפעראטור zh:温度This text is licensed under the Creative Commons CC-BY-SA License. This text was originally published on Wikipedia and was developed by the Wikipedia community.
The World News (WN) Network, has created this privacy statement in order to demonstrate our firm commitment to user privacy. The following discloses our information gathering and dissemination practices for wn.com, as well as e-mail newsletters.
We do not collect personally identifiable information about you, except when you provide it to us. For example, if you submit an inquiry to us or sign up for our newsletter, you may be asked to provide certain information such as your contact details (name, e-mail address, mailing address, etc.).
When you submit your personally identifiable information through wn.com, you are giving your consent to the collection, use and disclosure of your personal information as set forth in this Privacy Policy. If you would prefer that we not collect any personally identifiable information from you, please do not provide us with any such information. We will not sell or rent your personally identifiable information to third parties without your consent, except as otherwise disclosed in this Privacy Policy.
Except as otherwise disclosed in this Privacy Policy, we will use the information you provide us only for the purpose of responding to your inquiry or in connection with the service for which you provided such information. We may forward your contact information and inquiry to our affiliates and other divisions of our company that we feel can best address your inquiry or provide you with the requested service. We may also use the information you provide in aggregate form for internal business purposes, such as generating statistics and developing marketing plans. We may share or transfer such non-personally identifiable information with or to our affiliates, licensees, agents and partners.
We may retain other companies and individuals to perform functions on our behalf. Such third parties may be provided with access to personally identifiable information needed to perform their functions, but may not use such information for any other purpose.
In addition, we may disclose any information, including personally identifiable information, we deem necessary, in our sole discretion, to comply with any applicable law, regulation, legal proceeding or governmental request.
We do not want you to receive unwanted e-mail from us. We try to make it easy to opt-out of any service you have asked to receive. If you sign-up to our e-mail newsletters we do not sell, exchange or give your e-mail address to a third party.
E-mail addresses are collected via the wn.com web site. Users have to physically opt-in to receive the wn.com newsletter and a verification e-mail is sent. wn.com is clearly and conspicuously named at the point of
collection.If you no longer wish to receive our newsletter and promotional communications, you may opt-out of receiving them by following the instructions included in each newsletter or communication or by e-mailing us at michaelw(at)wn.com
The security of your personal information is important to us. We follow generally accepted industry standards to protect the personal information submitted to us, both during registration and once we receive it. No method of transmission over the Internet, or method of electronic storage, is 100 percent secure, however. Therefore, though we strive to use commercially acceptable means to protect your personal information, we cannot guarantee its absolute security.
If we decide to change our e-mail practices, we will post those changes to this privacy statement, the homepage, and other places we think appropriate so that you are aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it.
If we make material changes to our e-mail practices, we will notify you here, by e-mail, and by means of a notice on our home page.
The advertising banners and other forms of advertising appearing on this Web site are sometimes delivered to you, on our behalf, by a third party. In the course of serving advertisements to this site, the third party may place or recognize a unique cookie on your browser. For more information on cookies, you can visit www.cookiecentral.com.
As we continue to develop our business, we might sell certain aspects of our entities or assets. In such transactions, user information, including personally identifiable information, generally is one of the transferred business assets, and by submitting your personal information on Wn.com you agree that your data may be transferred to such parties in these circumstances.