LINK to BUY Brake Tubing / Flaring Tool: http://www.eastwood.com/professional-brake-tubing-flaring-tool.html LINK to BUY Hydraulic Flare Tool: http://www.eastwood.com/universal-hydraulic-flaring-kit.html LINK to BUY Tubing Flaring Kit: http://www.eastwood.com/tubing-flaring-kit-double-single.html LINK to BUY Brake Bleeder: http://www.eastwood.com/eastwood-brake-bleeder.html LINK to BUY Aerosol Injected Cleaner and Lubricator: http://www.eastwood.com/aerosol-injected-cleaner-lubricator.html LINK to BUY Brake Gray: http://www.eastwood.com/ew-brake-gray-aerosol-13-oz.html LINK to BUY Tubing and Forming Pliers Kit: http://www.eastwood.com/tubing-bender-and-forming-pliers-kit.html Professional Brake Tubing Flaring Tool Item #25304 Professional Brake-Flaring Tool lets you create 3 kinds of precision flares, in any of 5 sizes of tubing, in minimal time This brake-flaring tool will pay for itself with the first project, and it'll give you peace of mind knowing that your brake flares are of OE-precision quality and safety. You don't want to skimp on the brake system of your project vehicle! Create 45-degree single, double and bubble brake flares in seconds Brake-flaring tool works with stainless steel, steel, and soft metal tubing Use for brake lines, transmission cooler lines, fuel lines Turret-style indexed head keeps all brake-line-flaring forming dies ready to use Quick-release "T"-handle screw clamp securely holds the tube-retaining dies Includes brake-flare forming tool; 3/16", 1/4", 5/16", 3/8" and 4.75mm tube-retaining dies; handle; instructions and case Universal Hydraulic Flaring Kit Item #11535 Universal Hydraulic Flare Tool Set consistently fabricates accurate flares in aluminum, steel and soft metals...1-handed operation With just one hand, you can use this tool set to accurately fabricate these line-flaring types in aluminum, steel and soft metals (but NOT stainless steel): Push-Connect: 1/4", 5/16" and 3/8" GM Fuel Line: 5/16" and 3/8" Single/Double: 3/16", 1/4", 5/16", 3/8" and 1/2" Metric Bubble: 4.75mm, 6mm, 8mm and 10mm Tubing Flaring Kit Double Single Item #49001 Fabricate double-compression lines (brake) or single-compression lines (fuel, etc.) in steel, aluminum, or copper. Not recommended for stainless or tubing walls thicker than 0.040". Handles 3/16", 1/4", 5/16", 3/8" and 1/2" O.D. tubing. Limited 1 Year Manufacturer's Warranty. Eastwood Brake Bleeder Item #13414 The Eastwood Brake Bleeder lets one person successfully bleed brakes at the wheel, without depressing the pedal or wasting fluid. This versatile little pump develops vacuum in your caliper and brake line to pull out air, old fluid, and dirt. By simply switching a hose connection, the pump is able to produce pressure for completing testing that requires positive pressure. The kit comes complete in a blow molded case with: Hand Pump with Gauge, Reservoir Jar, Storage Jar, 3 valve adapters, necessary hoses and additional fittings. Eastwood Aerosol Injected Cleaner & Lubricator Item #12846 Eastwood's award-winning Aerosol-Injected System directs a focused blast of cleaner or lubricant to penetrate deep into hard-to-reach places Our Aerosol-Injected Clean/Lube System was the 2011 Winner of Popular Mechanic's™ Magazine Editor's Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can's nozzle that creates a tight seal to force the cleaner or lubricant deep into the tool or tubing, without blowback. Choose below from the Cleaner or the Lubricator...or both! 360-degree valves even spray upside down! Ideal for cleaning or lubricating anything around the car, shop and home Eastwood Brake Gray - Brake Fluid Resistant Paint Item #11756 Z Ultra-durable Brake Gray Paint resists brake fluid! Eastwood Brake Gray is a durable, heavy-duty coating that actually resists DOT 3 brake fluid, so it's perfect for painting master cylinders, disc brake calipers, brake drums, spindles, mounting brackets and hardware. Withstands up to 400 degreesF Excellent corrosion resistance Pure stainless steel pigment in an epoxy ester resin Tubing Bender and Forming Pliers Kit Item #13621 When you can bend tubing "kink-free", you avoid wasted time and money! If you try to bend a brake, fuel, transmission or A/C line by hand, you kink the tube...try to align or form the line by hand, you kink the tube. Since you're tired of wasting that time and money, let Eastwood end your frustration with our Tubing Bender and Forming Pliers Set. Pliers and Bender both bend 3/16" and 1/4" tubing Bender also works on 5/16" and 3/8" tubing Aligns, bends and adjusts Comfort-grip vinyl handles

• published: 10 Dec 2012
• views: 76459