- Order:
- Duration: 6:36
- Published: 04 Apr 2008
- Uploaded: 22 Apr 2011
- Author: Feji17
9-1-1 (phonetically expressed as "nine-one-one") is the emergency telephone number for the North American Numbering Plan (NANP).
It is one of eight N11 codes.
In some jurisdictions, the use of this number is reserved for true emergency circumstances only, and to use it for any other purpose (including non-emergency problems and prank calls) is a misdemeanor offense.
In many cases, the local emergency services would attempt to obtain telephone numbers that were easy for the public to remember. Many fire departments, for example, would attempt to obtain an emergency telephone line with a number ending in "3-4-7-3", which spelled the word 'Fire' on the corresponding letters of the rotary telephone dial. In some areas (especially during the time when local numbers could be reached by dialing only the last 5 digits), picking up the phone, dialing one's own local exchange prefix then "F-I-R-E" would ring the nearest fire station.
Some cities made early attempts at a centralized emergency number, using a conventional telephone number. In Toronto, Canada, for example, the Metropolitan Toronto Police communications bureau attempted to promote their emergency number 'Empire' (which was the name for the exchange '3-6'—all telephone exchanges at the time had corresponding names) 1-1111, or '361-1111' for use in all emergencies. The rationale was that the abbreviation of the Empire exchange in common usage, 'EM', corresponded to the first two letters of the word 'emergency' and that the caller only had to remember the number '1' beyond that. This was never widely accepted, in that the City's fourteen local fire departments continued to tell the public to call them directly and the service never actually included ambulances, which in those days were considered a private transportation service. This was further complicated by the fact that the numbers changed by municipality, and the emergency number and emergency services on one side of a street might be completely different from the other side if the street was a municipal boundary. When a caller was uncertain of his or her exact location, emergency responses could be delayed, and so, for most people, it was simply easier to rely upon the telephone operator to make the connections. The efforts of telephone companies to publicize "Dial '0' for Emergencies" were ultimately abandoned in the face of company staffing and liability concerns, but not before generations of school children were taught to "dial 0 in case of emergency," just as they are currently taught to dial 9-1-1. This situation of unclear emergency telephone numbers would continue, in most places in North America, into the early 1980s. In some locales, the problem persists to this day.
The first known experiment with a national emergency telephone number occurred in the U.K. in 1937, using the number 999. The first city in North America to use a central emergency number (in 1959) was the Canadian city of Winnipeg, Manitoba, which instituted the change at the urging of Stephen Juba, mayor of Winnipeg at the time. Winnipeg initially used 999 as the emergency number, but switched numbers when 9-1-1 was proposed by the United States. In the United States, the push for the development of a nationwide American emergency telephone number came in 1957 when the National Association of Fire Chiefs recommended that a single number be used for reporting fires. In 1967, the President's Commission on Law Enforcement and Administration of Justice recommended the creation of a single number that could be used nationwide for reporting emergencies. The burden then fell on the Federal Communications Commission, which then met with AT&T; in November, 1967 in order to come up with a solution.
In 1968, a solution was agreed upon. AT&T; chose to implement the concept, but with its unique emergency number, 9-1-1, which was brief, easy to remember, dialed easily, and worked well with the phone systems in place at the time. How the number 9-1-1 itself was decided upon is not well known and is subject to much speculation. However, many assert that the number 9-1-1 was chosen to be similar to the numbers 2-1-1 (long distance), 4-1-1 ("information" or directory assistance), and 6-1-1 (repair service), which had already been in use by AT&T; since the 1920s.
Another consideration is that most phones of the time used the pulse dialing system, which could be misdirected if the dial didn't spin freely, either from sticky mechanism or a user keeping the finger in the dial. Using 9-1-1 forced the user to remove the dialing finger after the first number (whether using pulse or DTMF dialing) and go to the opposite end of dial or keypad, thus reducing both accidental failure to dial the number and accidental dialing of the emergency number. Accidental dialing of 9-1-1 has become an increasing problem, as an increasing number of cellular phones are carried in pockets, purses or other places where objects may rest against the keys and repeatedly press them.
Not all such N11 numbers are common throughout the telephone systems of North America. Some of the designated services provided by these numbers are regional, and there are significant differences in number allocation between Canada and the United States; only 4-1-1 and 9-1-1 are universally used. In addition, because it was important to ensure that the emergency number was not dialed accidentally, 9-1-1 made sense because the numbers "9" and "1" were on opposite ends of a phone's rotary dial. Furthermore, the North American Numbering Plan in use at the time established rules for which numbers could be used for area codes and exchanges. At the time, the middle digit of an area code had to be either a 0 or 1, and the first two digits of an exchange could not be a 1. At the telephone switching station, the second dialed digit was used to determine if the number was long distance or local. If the number had a 0 or 1 as the second digit, it was long distance, if it had any other digit, it was a local call. Thus, since the number 9-1-1 was detected by the switching equipment as a special number, it could be routed appropriately. Also, since 9-1-1 was a unique number, never having been used as an area code or service code (although at one point GTE used test numbers such as 11911), it could fit into the existent phone system easily. AT&T; announced the selection of 9-1-1 as their choice of the three-digit emergency number at a press conference in the Washington (DC) office of Indiana Rep. J. Edward Roush, who had championed Congressional support of a single emergency number.
Soon after, in Alabama, Bob Gallagher, then-president of the independent Alabama Telephone Company (ATC), read an article in the Wall Street Journal from January 15, 1968, which reported the AT&T; 9-1-1 announcement. Gallagher’s competitive spirit motivated him to beat AT&T; to the punch by being the first to implement the 9-1-1 service. In need of a suitable spot within his company's territory to implement 9-1-1, he contacted Robert Fitzgerald, who was Inside State Plant Manager for ATC. Fitzgerald recommended Haleyville, Alabama as the prime site. Gallagher later issued a press release announcing that 9-1-1 service would begin in Haleyville on Feb. 16, 1968. Fitzgerald designed the circuitry, and with the assistance of technicians Jimmy White, Glenn Johnston, Al Bush and Pete Gosa, they quickly completed the central office work and installation. Just 35 days after AT&T;'s announcement, on February 16, 1968, the first-ever 9-1-1 call was placed by Alabama Speaker of the House Rankin Fite, from Haleyville City Hall, to U.S. Rep. Tom Bevill, at the city's police station. Bevill reportedly answered the phone with "Hello". At the City Hall with Fite was Haleyville mayor James Whitt; at the police station with Bevill were Gallagher and Alabama Public Service Commission director Eugene "Bull" Connor. Fitzgerald was at the ATC central office serving Haleyville, and actually observed the call pass through the switching gear as the mechanical equipment clunked out "9-1-1". The phone used to answer the first 9-1-1 call, a bright red model, is now in a museum in Haleyville, while a duplicate phone is still in use at the police station.
In 1968, 9-1-1 was established as the national emergency number for the United States. In theory at least, calling this single number provided a caller anywhere in the United States access to police, fire and ambulance services, through what would become known as a common Public-safety answering point (PSAP). Individual communities, however, were slow to adopt the new number, for a variety of reasons.
Conversion to 9-1-1 in Canada began in 1972 and most major cities are now using 9-1-1. Each year, Canadians make 12 million calls to 9-1-1.
The Caller Location Information (CLI) provided is normally integrated into an emergency dispatch center's computer-assisted dispatch (CAD) system, to provide the dispatcher with an onscreen street map that highlights the caller's position and the nearest available emergency responders. For Wireline (land line) E911, the location is an address. For Wireless E911, the location may be a set of coordinates or the physical address of the cellular tower from which the wireless call originated. Not all PSAPs have the Wireless and Wireline systems integrated. As other aspects of the technology of managing emergency response evolve, the PSAPs will need to evolve with them.
Each telephone company has at least two redundant telephone trunk lines connecting each host office telephone switch to each PSAP. These trunks are either directly connected to the PSAPs, or are connected to a telephone company central switch that intelligently distributes calls to the PSAPs. These special switches are often known as 9-1-1 Selective Routers. The use of 9-1-1 Selective Routers is becoming increasingly more common, as it simplifies the interconnection between newer office switches and the many older PSAP systems.
The effectiveness of this technology may sometimes be affected by the type of telephone infrastructure that the call is routed through. The PSAP may receive calls from the telephone company on older analog trunks, which are similar to regular telephone lines but are formatted to pass the calling party number. The PSAP may also receive calls on older-style digital trunks, which must be specially formatted to pass Automatic Number Identification (ANI) information only. Some upgraded PSAPs can receive calls in which the calling party number is already present. The location of the call is drawn from a computer routine which supports telephone company service billing, called the Charge Number Parameter. With some technologies, the PSAP trunking does not pass address information along with the call. Instead, only the calling party number is passed, and the PSAP must use the calling party number to look up the address in the ALI database. The ALI database is secured and separate from the public phone network, by design. Sometimes, on calls using land lines, the originating telephone number may not be passed to the PSAP at all, generally because the number is not in the ALI database. When this happens, the call receiver must confirm the location of the incoming call, and may have to redirect the call to another, more appropriate PSAP. ALI Failure occurs when the phone number is not passed or the phone number passed is not in the ALI database. In most jurisdictions, when ALI database lookup failure occurs, the telephone company has a legal mandate to fix the database entry.
Fees vary widely by locality. They may range from around $.25 per month to $3.00 per month, per line. The average wireless 9-1-1 fee in the United States, based on the fees for each state as published by the National Emergency Number Association (NENA), is around $.72. Since monthly fees do not vary based on the customer's usage of the network, the fees are considered, in tax terms, as highly "regressive", i.e., the fees disproportionately burden low-volume users of the public switched network (PSN) as compared with high-volume users. Some states cap the number of lines subject to the fee for large multi-line businesses, thereby shifting more of the fee burden to low-volume single-line residential customers or wireless customers.
In 2000, the U.S. Federal Communications Commission (FCC) issued an order requiring wireless carriers to determine and transmit the location of callers who dial 9-1-1. The FCC set up a phased program: Phase I transmitted the location of the receiving antenna for 9-1-1 calls, while Phase II transmitted the location of the calling telephone. The order set up certain accuracy requirements and other technical details, and milestones for completing the implementation of wireless location services. Subsequent to the FCC's order, many wireless carriers requested waivers of the milestones, and the FCC granted many of them. By mid-2005, the process of Phase II implementation was generally underway, but limited by the complexity of the coordination required from wireless carriers, PSAPs, local telephone companies and other affected government agencies, and the limited funding available to local agencies which need to convert PSAP equipment to display location data (usually on computerized maps). Such rules do not apply in Canada.
FCC rules require that all new mobile phones will provide their latitude and longitude to emergency operators in the event of a 9-1-1 call. Carriers may choose whether to implement this via Global Positioning System (GPS) chips in each phone, or by means of triangulation between cell towers. Due to limitations in technology (of the mobile phone, cellular phone towers, and PSAP equipment), a mobile caller's geographical information may not always be available to the local PSAP. Technologies are currently under development to remedy this situation and improve performance. Although there are now technological ways to obtain the geographical location of the caller, a 9-1-1 caller should try to be aware of the location of the incident about which he or she is calling.
When a cellular phone is deactivated, the phone number is often recycled to a new user, or to a new phone for the same user. The deactivated cell phone will still complete a 911 call (if it has battery power) but the 911 operator will see a specialized number indicating the cell phone has been deactivated. It is usually represented with an area code of (911)-xxx-xxxx. If the call is disconnected, the 911 operator will not be able to connect to the original caller. Also because the cell phone is no longer activated, the 911 operator is often unable to get Phase II information.
In March 2005, commercial Internet telephony provider Vonage was sued by the Texas attorney general, who alleged that their website and other sales and service documentation did not make clear enough that Vonage's provision of 9-1-1 service was not done in the traditional manner. In May 2005 the FCC issued an order requiring VoIP providers to offer 9-1-1 service to all their subscribers within 120 days of the order being published. The order set off anxiety among many VoIP providers, who felt it will be too expensive and require them to adopt solutions that won't support future VoIP products. In Canada, the federal regulators have required Internet Service Providers (ISPs), to provide an equivalent service to the conventional PSAPs, but even these encounter problems with caller location, since their databases rely on company billing addresses.
In May 2010 , most VoIP users who dial 9-1-1 are connected to a call center owned by their telephone company, or contracted by them. The operators are most often not trained emergency service providers, and are only there to do their best to connect the caller to the appropriate emergency service. If the call center is able to determine the location of the emergency they try to transfer the caller to the appropriate PSAP. Most often the caller ends up being directed to a PSAP in the general area of the emergency. A 9-1-1 operator at that PSAP must then determine the location of the emergency, and either send help directly, or transfer the caller to the appropriate emergency service. In April 2008, an 18-month-old boy in Calgary, Alberta died after a VoIP provider's 9-1-1 operator had an ambulance dispatched to the address of the boy's family's ISP, which is in Mississauga, Ontario.
In the Pennsylvania suburbs of Philadelphia, telephone exchanges frequently cross county lines. For example, a 9-1-1 call placed from Warminster, which is in Bucks County, may be misdirected to the Montgomery County PSAP because most of Warminster is served by the Hatboro telephone exchange, which is located in Montgomery County. Telford, Pennsylvania sits in both counties and the PSAP must determine in which county the call originated.
NENA has developed the North American 9-1-1 Resource Database which includes the National PSAP Registry. PSAPs can query this database to obtain emergency contact information of a PSAP in another county or state when it receives a call involving another jurisdiction. Online access to this database is provided at no charge for authorized local and state 9-1-1 authorities.
Category:Emergency telephone numbers Category:1968 introductions
This text is licensed under the Creative Commons CC-BY-SA License. This text was originally published on Wikipedia and was developed by the Wikipedia community.