Rush - The Trees
- Duration: 4:44
- Published: 2007-04-17
- Uploaded: 2010-12-16
- Author: sudajared
The Trees By Rush
video results for: trees
these configurations will be saved for each time you visit this page using this browser
Trees are an important component of the natural landscape because of their prevention of erosion and the provision of a weather-sheltered ecosystem in and under their foliage. They also play an important role in producing oxygen and reducing carbon dioxide in the atmosphere, as well as moderating ground temperatures. They are also elements in landscaping and agriculture, both for their aesthetic appeal and their orchard crops (such as apples). Wood from trees is a building material, as well as a primary energy source in many developing countries. Trees also play a role in many of the world's mythologies (see trees in mythology).
The tree form has evolved separately in unrelated classes of plants, in response to similar environmental challenges, making it a classic example of parallel evolution. With an estimate of 100,000 tree species, the number of tree species worldwide might total 25 percent of all living plant species. The majority of tree species grow in tropical regions of the world and many of these areas have not been surveyed yet by botanists, making species diversity and ranges poorly understood. , Mexico.]] The earliest trees were tree ferns, horsetails and lycophytes, which grew in forests in the Carboniferous period; tree ferns still survive, but the only surviving horsetails and lycophytes are not of tree form. Later, in the Triassic period, conifers, ginkgos, cycads and other gymnosperms appeared, and subsequently flowering plants in the Cretaceous period. Most species of trees today are flowering plants (Angiosperms) and conifers. For the listing of examples of well-known trees and how they are classified, see List of tree genera.
A small group of trees growing together is called a grove or copse, and a landscape covered by a dense growth of trees is called a forest. Several biotopes are defined largely by the trees that inhabit them; examples are rainforest and taiga (see ecozones). A landscape of trees scattered or spaced across grassland (usually grazed or burned over periodically) is called a savanna. A forest of great age is called old growth forest or ancient woodland (in the UK). A young tree is called a sapling.
As an exogenous tree grows, it creates growth rings as new wood is laid down concentrically over the old wood. In species growing in areas with seasonal climate changes, wood growth produced at different times of the year may be visible as alternating light and dark, or soft and hard, rings of wood. In tropical rainforest regions, with constant year-round climate, growth is continuous and the growth rings are not visible nor is there a change in the wood texture. In species with annual rings, these rings can be counted to determine the age of the tree, and used to date cores or even wood taken from trees in the past, a practice known as the science of dendrochronology. Very few tropical trees can be accurately dated in this manner. Age determination is also impossible in endogenous trees.
The roots of a tree are generally embedded in earth, providing anchorage for the above-ground biomass and absorbing water and nutrients from the soil. However, while ground nutrients are essential to a tree's growth the majority of its biomass comes from carbon dioxide absorbed from the atmosphere (see photosynthesis). Above ground, the trunk gives height to the leaf-bearing branches, aiding in competition with other plant species for sunlight. In many trees, the arrangement of the branches optimizes exposure of the leaves to sunlight.
Not all trees have all the plant organs or parts mentioned above. For example, most palm trees are not branched, the saguaro cactus of North America has no functional leaves, tree ferns do not produce bark, etc. Based on their general shape and size, all of these are nonetheless generally regarded as trees. A plant form that is similar to a tree, but generally having smaller, multiple trunks and/or branches that arise near the ground, is called a shrub. However, no precise differentiation between shrubs and trees is possible. Given their small size, bonsai plants would not technically be 'trees', but one should not confuse reference to the form of a species with the size or shape of individual specimens. A spruce seedling does not fit the definition of a tree, but all spruces are trees.
As a general standard, tree girth is taken at 'breast height'. This is cited as dbh (diameter at breast height) in tree and forestry literature. while those who measure ornamental trees usually measure at 1.5 m above ground;
Modern trends are to cite the tree's diameter rather than the circumference. Diameter of the tree is calculated by finding the medium diameter of the trunk, in most cases obtained by dividing the measured circumference by π; this assumes the trunk is mostly circular in cross-section (an oval or irregular cross-section would result in a mean diameter slightly greater than the assumed circle). Accurately measuring circumference or diameter is difficult in species with the large buttresses that are especially characteristic in many species of rainforest trees. Simple measurement of circumference of such trees can be misleading when the circumference includes much empty space between buttresses.
One further problem with measuring baobabs Adansonia is that these trees store large amounts of water in the very soft wood in their trunks. This leads to marked variation in their girth over the year (though not more than about 2.5%), swelling to a maximum at the end of the rainy season, minimum at the end of the dry season.
The stoutest living single-trunk species in diameter are: #African Baobab Adansonia digitata: , Glencoe Baobab (measured near the ground), Limpopo Province, South Africa.. This tree split up in November 2009 and now the stoutest baobab could be Sunland Baobab (South Africa) with idealised diameter 10.64 m and correct circumference - 33.4 m. #Montezuma Cypress Taxodium mucronatum: , Árbol del Tule, Santa Maria del Tule, Oaxaca, Mexico. Note though that this diameter includes buttressing; the actual idealised diameter of the area of its wood is . #Coast Redwood Sequoia sempervirens: , Lost Monarch Jedediah Smith Redwoods State Park, California, United States. #Australian Oak Eucalyptus obliqua: #Australian Mountain-ash Eucalyptus regnans: , Big Foot #Western Redcedar Thuja plicata: , Kalaloch Cedar, Olympic National Park #Sitka Spruce Picea sitchensis: , Quinalt Lake Spruce, Olympic National Park #Alerce Fitzroya cupressoides: An additional problem lies in instances where multiple trunks (whether from an individual tree or multiple trees) grow together. The Sacred Fig is a notable example of this, forming additional 'trunks' by growing adventitious roots down from the branches, which then thicken up when the root reaches the ground to form new trunks; a single Sacred Fig tree can have hundreds of such trunks. #Coast Redwood Sequoia sempervirens: 1,203 m³ (42,500 cu ft), Lost Monarch #Montezuma Cypress Taxodium mucronatum: 750 m³ (25,000 cu ft), Árbol del Tule #Western Redcedar Thuja plicata: 500 m³ (17,650 cu ft ), Quinault Lake Redcedar #Australian Mountain-ash Eucalyptus regnans: 360 m³ (12,714 cu ft), Arve Big Tree proposes a method of estimating the age of large and veteran trees in the United Kingdom through the correlation between a tree's stem diameter, growth character and age.
The verified oldest measured ages are: #Great Basin Bristlecone Pine (Methuselah) Pinus longaeva: 4,844 years #Alerce Fitzroya cupressoides: 3,622 years #Huon-pine Lagarostrobos franklinii: 2,500 years) and Western Redcedar Thuja plicata. The oldest known European Yew is the Llangernyw Yew in the Churchyard of Llangernyw village in North Wales, which is estimated to be between 4,000 and 5,000 years old.
The oldest reported age for an angiosperm tree is 2293 years for the Sri Maha Bodhi Sacred Fig (Ficus religiosa) planted in 288 BC at Anuradhapura, Sri Lanka. This is also the oldest human-planted tree with a known planting date.
Abiotic sources include lightning, vehicles impacts, and construction activities. Construction activities can involve a number of damage sources, including grade changes that prevent aeration to roots, spills involving toxic chemicals such as cement or petroleum products, or severing of branches or roots.
Both damage sources can result in trees becoming dangerous, and the term "hazard trees" is commonly used by arborists, and industry groups such as power line operators. Hazard trees are trees that, due to disease or other factors, are more susceptible to falling in windstorms, or having parts of the tree fall.
Evaluating the danger a tree presents is based on a process called the Quantified Tree Risk Assessment.
Assessment as to labeling a tree a hazard tree can be based on a field examination. Assessment as a result of construction activities that will damage a tree is based on three factors: severity, extent and duration. Severity relates usually to the degree of intrusion into the TPZ and resultant root loss. Extent is frequently a percentage of a factor such as canopy, roots or bark, and duration is normally based on time. Root severing is considered permanent in time.
Trees are similar to people. Both can withstand massive amounts of some types of damage and survive, but even small amounts of certain types of trauma can result in death. Arborists are very aware that established trees will not tolerate any appreciable disturbance of the root system. However, lay people and construction professionals are seldom cognizant of how easily a tree can be killed.
One reason for confusion about tree damage from construction involves the dormancy of trees during winter. Another factor is that trees may not show symptoms of damage until 24 months or longer after damage has occurred. For that reason, persons uneducated in arboriculture science may not correlate the actual cause and resultant effect.
Various organizations, such as the International Society of Arboriculture, the British Standards Institute and the National Arborist Association (about 2007 renamed the Tree Industry Association), have long recognized the importance of construction activities that impact tree health. The impacts are important because they can result in monetary losses due to tree damage and resultant remediation or replacement costs, as well as violation of government ordinances or community or subdivision restrictions.
As a result, protocols for tree management prior to, during and after construction activities are well established, tested and refined. These basic steps are involved:
International standards are uniform in analyzing damage potential and sizing TPZs (tree protection zones) to minimize damage. For mature to fully mature trees, the accepted TPZ comprises a 1.5-foot set-off for every 1 inch diameter of trunk. That means for a 10-inch tree, the TPZ would extend 15 feet in all directions from the base of the trunk at ground level.
For young or small trees with minimal crowns (and trunks less than 4 inches in diameter) a TPZ equal to 1 foot for every inch of trunk diameter may suffice. That means for a 3-inch tree, the TPZ would extend 3 feet in all directions from the base of the trunk at ground level. Detailed information on TPZs and related topics is available at minimal cost from organizations like the International Society for Arboriculture.
These most likely use diameter measured at breast height, above ground—not the larger base diameter. A general model for any year and diameter is Value = 17.27939*( diameter ^2)*1.022^( year -1985) assuming 2.2% inflation per year. (Note, the right side of this equation is written to paste into Excel or Google to perform the calculation.) Extrapolations from any model can cause problems, so tree value estimates for diameters larger than 30 inches might have to be capped so trees do not exceed 27% of the total appraised property value.
This text is licensed under the Creative Commons CC-BY-SA License. This text was originally published on Wikipedia and was developed by the Wikipedia community.
