Wow, that was easy! I just installed XEPC (Linux) on my 901 Eee-PC, and it required nowhere near as many steps as most (probably older) tutorials will have you believe. All you need to do is download the iso image from Sourceforge, use 7-Zip to copy its contents to a USB stick (2GB or more) and run the included ‘makeboot.bat’ file. Your USB stick will then be bootable, and all you need to do is boot off of it (by pressing ESC during boot). The onscreen instructions will guide you through the rest.
(more…)

I’ve been connected to my LAN through the air for a couple of years now, and I’ve had some pretty mixed experiences. My Linksys WRT54G router is a marvel, and has yet to fail me. The adapters I’ve used with my PC however have for the must part not been able to keep up. And, as I realized today, they all happen to be made by Sitecom.
(more…)

I wrote about this a while back, and it seems someone had the exact same idea. Brando just released a USB hub with switches that let you turn the connected devices on or off as you please.

http://usb.brando.com.hk/prod_detail.php?prod_id=00394

I’m not too fond of the design (which does little to hide the wiring and uses slide switches instead of more convenient push buttons), and a couple of more ports would have been nice, but this is a great device nontheless. Every time someone does not power up that little-used scanner and saves rain forests as a result is important.

I use lots of USB devices. External hard drives, a flatbed scanner, card reader, webcam, etc… But I don’t use all of them very often. I’ve even disconnected the scanner because it has no on/off switch and it makes all kind of calibrating noises when I start my computer. My external hard drive, which I use just once a week to run a system backup, also makes more noise than my PC does and it too lacks a proper power switch. This why I came up with the idea of an USB hub with switches that let you decide which devices you want to start up and which you don’t need.
(more…)